PubMed Health⌕ Search

Biomedical subjects

David Attwood

Publications and source records attributed to David Attwood.

At least 19 recordsLinked to original sources
PubMed2006

In vitro evaluation of dendrimer prodrugs for oral drug delivery.

Dendrimer-based prodrugs were used to enhance the transepithelial permeability of naproxen, a low solubility model drug. The stability of the dendrimer-naproxen link was assessed. Naproxen was conjugated to G0 polyamidoamine (PAMAM) dendrimers either by an amide bond or an ester bond. The stability of G0 prodrugs was evaluated in 80% human plasma and 50% rat liver homogenate. The cytotoxicity of conjugates towards Caco-2 cells was determined and the transport of the conjugates across Caco-2 monolayers (37 degrees C) was reported. In addition, one lauroyl chain (L) was attached to the surface group of G0 PAMAM dendrimer of the diethylene glycol ester conjugate (G0-deg-NAP) to enhance permeability. The lactic ester conjugate, G0-lact-NAP, hydrolyzed slowly in 80% human plasma and in 50% rat liver homogenate (t(1/2)=180 min). G0-deg-NAP was hydrolyzed more rapidly in 80% human plasma (t(1/2)=51 min) and was rapidly cleaved in 50% liver homogenate (t(1/2)=4.7 min). The conjugates were non-toxic when exposed to Caco-2 cells for 3h. Permeability studies showed a significant enhancement in the transport of naproxen when conjugated to dendrimers; L-G0-deg-NAP yielding the highest permeability. Dendrimer-based prodrugs with appropriate linkers have potential as carriers for the oral delivery of low solubility drugs such as naproxen.

Administration, Oral↗
PubMed2006

In situ gelling pectin formulations for oral drug delivery at high gastric pH.

The aim of the study was to compare the gelation and drug release characteristics of formulations of pectin with high (31%) and low (9%) degrees of methoxylation over a wide pH range (pH 1.2-5.0). Dilute solutions of pectin (1.5%, w/v) containing complexed calcium ions formed gels in vitro at low pH (pH<2.5) as a consequence of cross-linking of the galacturonic chains by calcium ions released from the complex, but the efficiency of gelation was significantly reduced with increase of pH because of incomplete release of complexed Ca(++). Gelation of formulations of pectin with a degree of esterification of 9% (DE9) was observed over the pH range 2.5-5.0 in the presence of 1.6mM Ca(++), but was incomplete in formulations of pectin with a degree of esterification of 31% (DE31). A sustained release of ambroxol was observed following oral administration of pectin DE9 formulations to gastric-acidity controlled rabbits at pH 5.5-5.7 and visual observation of the stomach contents of these rabbits confirmed in situ gelation of these formulations. There was no evidence of in situ gelation of pectin DE31 formulations under these conditions and a rapid initial drug release was observed. Differences in gelling characteristics in this pH range were attributed to the greater susceptibility of low methoxylated pectin to cross-linking by di- and tri-valent ions present in the gastric juice. It is concluded that formulations of pectin with a low degree of esterification have potential application as in situ gelling vehicles for the sustained delivery of drugs following oral administration under conditions of high gastric pH.

Administration, Oral↗
PubMed2006

Micellization and drug solubilization in aqueous solutions of a diblock copolymer of ethylene oxide and phenyl glycidyl ether.

The aim of this study was to define a block copolymer micellar system with a high solubilization capacity for poorly soluble aromatic drugs. Ethylene oxide and phenyl glycidyl ether were sequentially polymerized to form the diblock copolymer G5E67 (G = phenyl glycidyl ether, OCH2CH(CH2OC6H5); E = oxyethylene, OCH2CH2; subscripts denote number-average block lengths in repeat units). The association properties in aqueous solution over the range 20-50 degrees C were investigated by surface tensiometry and light scattering, yielding values of the cmc, hydrodynamic radius, and association number; gel boundaries in concentrated micellar solution were investigated by tube inversion. The solubilization capacity of G5E67 for the poorly water-soluble drug griseofulvin was higher than that of a triblock EGE copolymer of longer G block length and considerably higher than that achieved with poloxamers (EmPnEm, P = oxypropylene).

Ethylene Oxide↗
PubMed2006

Mixtures of triblock copolymers E(62)P(39)E(62) and E(137)S(18)E(137) potential for drug delivery from in situ gelling micellar formulations.

The gelation behaviour of concentrated micellar solutions of mixtures of a block copolymer of ethylene oxide and styrene oxide (E(137)S(18)E(137)) with one of ethylene oxide and propylene oxide (E(62)P(39)E(62)) has been investigated. Over a wide range of compositions, up to 90 wt.% E(137)S(18)E(137) in the mixture, gelation resembled that of solutions of E(62)P(39)E(62) alone, i.e. they gelled on heating from ambient to body temperature. In related experiments, using the aromatic drug griseofulvin as a comparative standard, it was demonstrated that solubilisation efficiency of dilute micellar solutions of the mixtures with 80 wt.% or more E(137)S(18)E(137) approached that of solutions of E(137)S(18)E(137) alone. Thus it was shown that the mixed system could have both the satisfactory solubilisation capacity of micellar solutions of E(137)S(18)E(137) and the desirable gelation characteristics of E(62)P(39)E(62), and so have potential for use in drug release applications involving in situ gelation.

Antifungal Agents↗
PubMed2006

Self-association of block copoly(oxyalkylene)s in aqueous solution. Effects of composition, block length and block architecture.

The article deals with the association behaviour in dilute aqueous solution of block copoly(oxyalkylene)s in which hydrophilic poly(ethylene oxide) is combined with hydrophobic poly(propylene oxide), poly(1,2-butylene oxide) or poly(styrene oxide). Polymers with three simple architectures are considered, i.e. copolymers of type EmAn, EmAnEm and AnEmAn, where E denotes an oxyethylene unit, A denotes a hydrophobic oxyalkylene unit, and the subscripts m and n denote number-average block lengths in repeat units. The aim is to examine how composition, block length and block architecture govern two fundamental properties, critical micelle concentration (cmc) and micelle association number (N), for systems which are in dynamic equilibrium. Copolymers with properties known to be greatly affected by heterogeneity in composition are excluded from consideration. A uniform pattern of behaviour emerges when log(cmc) is plotted against reduced hydrophobic block length (x), consistent with the micellisation equilibrium changing from one between unimers and multimolecular micelles at low values of x, to one between unimolecular micelles and multimolecular micelles at high values of x. Support for this model is provided by the enthalpy of micellisation, values of which fall effectively to zero as x is increased. Values of the micelle association number are used to define a critical hydrophobic block length for micellisation (n(cr)) for each class of diblock copolymers, values of which apply equally well to the half-length of the central block of corresponding EmAnEm triblock copolymers. Given these values, and irrespective of block architecture, the overall scaling law for the weight-average association number of the micelles is shown to be Nw = n'(1.07)m(-0.63) where m is the length (or half-length) of the hydrophilic block, and n' is the effective length of the hydrophobic block, equal to its length (or half-length) minus the critical length, i.e. n' = n-n(cr).

Algorithms↗
PubMed2006

Single-element objective lens for soft x-ray differential interference contrast microscopy.

High-resolution soft x-ray differential interference contrast (DIC) imaging was demonstrated through the use of a single-element objective, the XOR pattern, in a full-field soft x-ray microscope. DIC images of the magnetic domains in a 59 nm thick amorphous Gd25Fe75 layer were obtained and magnetic phase contributions were directly imaged. With its elemental, chemical, and magnetic specificity, compatibility with various sample environments, and ease of implementation, we expect this soft x-ray DIC technique to become one of the standard modes of operation for existing full-field soft x-ray microscopes.

Journal Article↗
PubMed2006

Direct index of refraction measurements at extreme-ultraviolet and soft-x-ray wavelengths.

Coherent radiation from undulator beamlines has been used to directly measure the real and imaginary parts of the index of refraction of several materials at both extreme-ultraviolet and soft-x-ray wavelengths. Using the XOR interferometer, we measure the refractive indices of silicon and ruthenium, essential materials for extreme-ultraviolet lithography. Both materials are tested at wavelength (13.4 nm) and across silicon's L2 (99.8 eV) and L3 (99.2 eV) absorption edges. We further extend this direct phase measurement method into the soft-x-ray region, where measurements of chromium and vanadium are performed around their L3 absorption edges at 574.1 and 512.1 eV, respectively. These are the first direct measurements, to our knowledge, of the real part of the index of refraction made in the soft-x-ray region.

Journal Article↗
PubMed2006

The influence of variation of gastric pH on the gelation and release characteristics of in situ gelling pectin formulations.

The aim of this study was to examine the influence of variation of gastric pH over the range 1-3 on the gelation of liquid formulations of pectin and on the in vitro and in vivo release of paracetamol and ambroxol from the resultant gels. The formulations were dilute solutions of pectin containing complexed calcium ions that form gels when these ions are released in the acidic environment of the stomach. Gels suitable as vehicles for sustained delivery of these drugs were formed in vitro at pH<3 from pectin solutions of concentrations 1.0-2.0% (w/v). Very weak gels were formed at pH 3.0 resulting in poor sustained release characteristics compared with those at pH 1.2; no significant in vitro gelation was observed at pH 3.5. The bioavailabilities of paracetamol and ambroxol from gels formed in the stomach following oral administration of the liquid formulations were investigated using gastric-acidity controlled rabbits. Visual observations showed in situ gelation of 1.5% (w/v) pectin formulations under conditions of both high (pH 1.0-1.6) and low gastric acidity (pH 3.3-3.6). The bioavailabilities of these drugs were not significantly different when released from gels formed at the two pH limits suggesting that normal variations of gastric acidity in the fasting state will have no effect on the bioavailability of these drugs when delivered using this vehicle.

Acetaminophen↗
PubMed2006

Association behavior of mixed triblock copoly(oxyalkylene)s (type EBE and ESE) in aqueous solution.

The micellization of binary mixtures of water-soluble block copolymers E(m)B(n)E(m) and E(m)S(n)E(m) in dilute solution was investigated by light-scattering methods. We use the notation E, B, and S to denote chain units derived, respectively, from ethylene oxide, butylene oxide, and styrene oxide and the subscripts to denote number-average chain lengths in chain units. Two distinct distributions of micelles were formed in solutions of a 50:50 wt % mixture of copolymers E64B20E64 and E137S18E137, which had hydrophobic blocks of similar length but very different hydrophobicity. One distribution of micelles was formed in solutions of a mixture (50:50 wt %) of copolymers E135B20E135 and E82S9E82, which had hydrophobic blocks of different length but similar hydrophobicity. In this case, the properties of the micelles formed in solutions of the mixture were very similar to those of micelles of E82S9E82 alone. This result extended to concentrated solutions, because the hard-gel boundary for the mixture proved to be very similar to that of solutions of E82S9E82 alone.

Light↗
PubMed2006

The influence of gastric acidity and taste masking agent on in situ gelling pectin formulations for oral sustained delivery of acetaminophen.

Dilute solutions of pectin containing complexed calcium ions form gels when these ions are released in the acidic environment of the stomach. The aim of this study was to examine the influence of a variation of gastric pH and the addition of a taste masking agent on the gelation of the pectin solutions and on the in vitro and in vivo release of acetaminophen from the gels. Increase of pH above 2.5 and addition of 10% (w/v) D-sorbitol significantly affected the ability of 1.5% (w/v) pectin solutions to form coherent gels in vitro. Gelation of sorbitol-free formulations was observed at pH 1.2 and in vitro release of acetaminophen from the gels followed diffusion-controlled kinetics; in vitro gelation of these formulations, however, was incomplete at pH 3.0 resulting in poor sustained release characteristics. Inclusion of 10% (w/v) D-sorbitol in the formulations inhibited the in vitro gelation of the 1.5% (w/v) pectin sols and poor sustained release properties were noted from these formulations even at pH 1.2. The bioavailability of acetaminophen from gels formed in the stomach of gastric-acidity controlled rabbits following oral administration of the liquid formulations was not, however, significantly affected either by the inclusion of 10% (w/v) D-sorbitol or increase of pH to 3.6. Visual observation showed in situ gelation of 1.5% (w/v) pectin formulations containing D-sorbitol at pH 4.3 suggesting that normal variations of gastric acidity in the fasting state will have no effect on the bioavailability of acetaminophen when delivered using these formulations.

Acetaminophen↗
PubMed2005

Synthesis, characterization and stability of dendrimer prodrugs.

The design, synthesis and characterization of a series of zero generation (G0) PAMAM dendrimer-based prodrugs for the potential enhancement of drug solubility and bioavailability are described. Naproxen, a poorly water-soluble drug, was conjugated to dendrimers either directly by an amide bond or by ester bonds using either L-lactic acid or diethylene glycol as a linker. All of the prodrugs were more hydrophilic than the parent drug, as evaluated by drug partitioning between 1-octanol and phosphate buffer (pH 7.4). Hydrolysis of the conjugates was measured at 37 degrees C in hydrochloric acid buffer (pH 1.2), phosphate buffer (pH 7.4), borate buffer (pH 8.5) and in 80% human plasma. The amide conjugate and both ester conjugates were chemically stable at all pHs over 48 h of incubation. Naproxen was enzymatically released from both ester conjugates in plasma; the lactic ester conjugate hydrolyzed slowly with only 25% of naproxen released after 24h, the diethylene glycol ester conjugate cleaved rapidly following pseudo first order kinetics (t(1/2) = 51 min). G0 PAMAM dendrimer prodrugs with an appropriate linker (diethylene glycol) show good potential as carriers for oral delivery.

Anti-Inflammatory Agents, Non-Steroidal↗
PubMed2005

Dendrimer-drug interactions.

The interaction between drugs and dendrimers is reviewed with particular reference to the entrapment of drugs within the dendrimer architecture and the electrostatic and covalent complexation of drugs to the dendrimer surface. The application of dendrimer-drug complexation in the enhancement of drug solubility and bioavailability and the use of the complexes as vehicles for the controlled release of drugs and drug targeting is discussed.

Dendrimers↗
PubMed2005

Controlling the gelation of aqueous micellar solutions of ethylene-oxide-based block copoly(oxyalkylene)s.

Micellar solutions of EmPnEm copolymers may be mobile at ambient temperature and form hard gels on warming to body temperature, whereas micellar solutions of EmSnEm copolymers do not show this effect (E denotes oxyethylene, P oxypropylene and S oxyphenylethylene, and subscripts m and n denote chain lengths). The aim of this study was to combine the desirable gelation characteristics of solutions of the EmPnEm copolymers with the greater solubilising capacities of solutions of the EmSnEm copolymers. Accordingly, the gelation characteristics in aqueous solution of binary mixtures of the triblock copolymer E62P39E62 (Pluronic F87) with E137S18E137, E82S9E82 or E76S5E76 were investigated by rheological techniques. We have shown that 50/50 wt.% mixtures of E62P39E62 with either E137S18E137 or E82S9E82 at a total copolymer concentration of approximately 30 wt.% are fluids of low viscosity at temperature below 22-25 degrees C and gels of high elastic modulus at body temperature.The mixed systems have potential as vehicles for the controlled delivery of solubilised drug from gels formed in situ following subcutaneous injection of a low viscosity aqueous solution.

Ethylene Oxide↗
PubMed2005

Micelles and gels of mixed triblock copoly(oxyalkylene)s in aqueous solution.

The micellization in dilute aqueous solution of a 50/50 wt% mixture of two triblock copolymers, E45B14E45 and E62P39E62, and the gelation of concentrated micellar solutions have been investigated over a range of temperatures. Here E, B, and P denote oxyethylene, oxubutylene, and oxypropylene chain units. Comparison is made with aqueous solutions of the individual copolymers. The results of light scattering measurements are consistent with effectively separate micellization of the two copolymers in the mixture. Hard gel formed when the extent of micellization was high for both copolymers. Because of the relatively high critical micellization temperatures of copolymer E62P39E62, the low-temperature boundary of the hard gel was high for this copolymer and for the mixture. The minimum concentration for hard-gel formation was higher for the mixture than for either of the individual copolymers, as would be expected for packing of two distributions of micelles of different average size.

Alkenes↗
PubMed2005

Block copolymers of ethylene oxide and phenyl glycidyl ether: micellization, gelation, and drug solubilization.

Three triblock copolymers of ethylene oxide and phenyl glycidyl ether, type E(m)G(n)E(m), where G = OCH2CH(CH2OC6H5) and E = OCH2CH2, were synthesized and characterized by gel-permeation chromatography, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, and NMR spectroscopy. Their association properties in aqueous solution were investigated by surface tensiometry and light scattering, yielding values of the critical micelle concentration (cmc), the hydrodynamic radius, and the association number. Gel boundaries in concentrated micellar solution were investigated by tube inversion, and for one copolymer, the temperature and frequency dependence of the dynamic moduli served to confirm and extend the phase diagram and to highlight gel properties. Small-angle X-ray scattering was used to investigate gel structure. The overall aim of the work was to define a block copolymer micellar system with better solubilization capacity for poorly soluble aromatic drugs than had been achieved so far by use of block copoly(oxyalkylene)s. Judged by the solubilization of griseofulvin in aqueous solutions of the E(m)G(n)E(m) copolymers, this aim was achieved.

Antifungal Agents↗
PubMed2005

The effect of taste masking agents on in situ gelling pectin formulations for oral sustained delivery of paracetamol and ambroxol.

The aim of this study was to examine the influence of polyhydric alcohols (taste masking agents) on the rheological properties of in situ gelling pectin formulations and on the in vitro and in vivo release of paracetamol and ambroxol from these formulations. Gelation of orally administered pectin solutions containing calcium in complexed form occurred on release of calcium in the acidic environment of the stomach. Inclusion of 10% (w/v) sorbitol in 2% (w/v) pectin sols reduced the viscosity and ensured Newtonian flow properties. Xylitol and mannitol in similar concentrations were less effective in reducing viscosity; sucrose increased viscosity and caused non-Newtonian flow. The in vitro release of paracetamol from 2% (w/v) pectin gels formulated with 10% (w/v) of sorbitol, erythritol, xylitol or mannitol, and of ambroxol from 2% (w/v) pectin gels containing 10% (w/v) sorbitol, followed diffusion-controlled kinetics. Pectin gels (2%, w/v) containing sorbitol (10%, w/v) sustained the release of paracetamol in the rat stomach and bioavailabilities of approximately 90% of those from an orally administered paracetamol syrup were achieved. Sustained release of ambroxol from in situ gelling formulations was achieved with pectin concentrations of 1.5 and 1% (w/v) and a sorbitol concentration of 10% (w/v).

Acetaminophen↗
PubMed2005

Solubilisation in aqueous micellar solutions of block copoly(oxyalkylene)s.

The solubilisation capacities of micellar solutions of diblock and triblock copolymers composed of hydrophilic poly(ethylene oxide) and hydrophobic poly(styrene oxide) have been compared using the poorly water-soluble drug griseofulvin as a model solubilisate. Our results showed an increase of solubilisation capacity (expressed as mg griseofulvin per gram of hydrophobic block) with temperature and, for spherical micelles, with core volume before reaching limiting values. A change of micelle shape from spherical to cylindrical (or worm-like) resulting from an increase in micelle aggregation number was accompanied by a further enhancement of solubilisation capacity. Comparison with the solubilisation of the same drug in micellar solutions of block copolymers of poly(ethylene oxide) and poly(1,2-butylene oxide) showed that the solubilisation capacity of a poly(styrene oxide) block was approximately four times that of a poly(1,2-butylene oxide) block for spherical micelles. Solubilisation capacity at 25 degrees C was approximately doubled when griseofulvin was incorporated into a copolymer melt and micelles initially formed from the drug-loaded melt at 65 degrees C rather than by loading the drug into pre-micellised solution at 25 degrees C in the usual manner.

Micelles↗