Higher-throughput, label-free, real-time molecular interaction analysis.
Explore the source record for details and available documents.
Biochemistry↗
Biomedical subjects
David G Myszka
Publications and source records attributed to David G Myszka.
High-resolution characterization of antibody fragment/antigen interactions using Biacore T100.
A Biacore T100 optical biosensor was used to characterize the binding kinetics of a panel of antigen binding fragments (Fabs) directed against the PcrV protein from Pseudomonas aeruginosa. PcrV protein forms part of the type III secretion system complex of this opportunistic pathogen. We demonstrate that the biosensor response data for each Fab collected from three different surface densities of the antigen could be fit globally to a simple 1:1 interaction model. Importantly, we found that the Fabs with the slowest dissociation rate provided the best protection in cell cytotoxicity studies. To further characterize the Fab interactions, binding data were automatically acquired at different temperatures and under different buffer conditions. The comprehensive characterization of these Fabs shows how Biacore T100 can be used to complement protein therapeutic discovery programs from basic research to the selection of therapeutic candidates.
Animals↗
Comparative analysis of 10 small molecules binding to carbonic anhydrase II by different investigators using Biacore technology.
In this benchmark study, 26 investigators were asked to characterize the kinetics and affinities of 10 sulfonamide inhibitors binding to the enzyme carbonic anhydrase II using Biacore optical biosensors. A majority of the participants collected data that could be fit to a 1:1 interaction model, but a subset of the data sets obtained from some instruments were of poor quality. The experimental errors in the k(a), k(d), and K(D) parameters determined for each of the compounds averaged 34, 24, and 37%, respectively. As expected, the greatest variation in the reported constants was observed for compounds with exceptionally weak affinity and/or fast association rates. The binding constants determined using the biosensor correlated well with solution-based titration calorimetry measurements. The results of this study provide insight into the challenges, as well as the level of experimental variation, that one would expect to observe when using Biacore technology for small molecule analyses.
Biosensing Techniques↗
Exploring "one-shot" kinetics and small molecule analysis using the ProteOn XPR36 array biosensor.
A ProteOn XPR36 parallel array biosensor was used to characterize the binding kinetics of a set of small molecule/enzyme interactions. Using one injection with the ProteOn's crisscrossing flow path system, we collected response data for six different concentrations of each analyte over six different target protein surfaces. This "one-shot" approach to kinetic analysis significantly improves throughput while generating high-quality data even for low-molecular-mass analytes. We found that the affinities determined for nine sulfonamide-based inhibitors of the enzyme carbonic anhydrase II were highly correlated with the values determined using isothermal titration calorimetry. We also measured the temperature dependence (from 15 to 35 degrees C) of the kinetics for four of the inhibitor/enzyme interactions. Our results illustrate the potential of this new parallel-processing biosensor to increase the speed of kinetic analysis in drug discovery and expand the applications of real-time protein interaction arrays.
Biosensing Techniques↗
A theoretical and experimental study of competition between solution and surface receptors for ligand in a Biacore flow cell.
Rate constants that characterize the kinetics of binding and dissociation between biomolecules carry fundamental information about the biological processes these molecules are involved in. An instrument that is widely used to determine these rate constants is the Biacore. In a Biacore experiment, one of the reactants, which we will call the receptor, is immobilized on a sensor chip. During the binding phase of the experiment the other reactant flows past the chip. After binding, buffer alone is introduced into the flow cell and dissociation is monitored. Often surface-based binding assays are influenced by the transport of the reactant in solution, complicating the determination of the chemical rate constants from the observed binding kinetics. We propose a new way to determine the dissociation rate constant by adding soluble receptor during dissociation. The method is tested first on simulated data and then on Biacore experiments where the lac repressor protein binds and dissociates from a stretch of double stranded DNA containing the lac repressor binding site. With this method we find a dissociation rate constant k(d)=0.075 +/- 0.005s(-1), a value that is faster than previously obtained from Biacore experiments. In developing our method to analyze these experiments we obtain an expression for the transport limited rate constant for a Biacore experiment when soluble receptor is present during dissociation.
Biosensing Techniques↗
Analyzing ligand and small molecule binding activity of solubilized GPCRs using biosensor technology.
We used Biacore technology to measure directly the binding of natural ligands and small molecules to the chemokine receptors CXCR4 and CCR5. Both G protein-coupled receptors were solubilized from whole cell pellets and captured on antibody surfaces for analysis. Our solubilization conditions maintained high-affinity binding of chemokines SDF-1alpha and RANTES to CXCR4 and CCR5, respectively. Surface density- and buffer-dependent binding responses, along with binding data for a selective ligand (RCP-168), further validated the biosensor assay. In addition, we showed that it is possible to collect high-quality binding responses for the archetypal small molecule inhibitors JM-2987 and TAK-779. Finally, using our biosensor-based method, we characterized the kinetics of 19 novel small molecule inhibitors of CCR5 and showed that their affinities correlated with values determined for the membrane-associated receptor. Together, the chemokine and small molecule binding data provide evidence that the solubilized receptors maintain native binding properties. These solubilized receptor preparations could be useful reagents for biophysical studies as well as for structural analysis.
Chemokine CCL5↗
A biosensor-based approach toward purification and crystallization of G protein-coupled receptors.
Biacore technology was used to develop an affinity purification method and screen cocrystallization conditions for the chemokine receptor CCR5. We characterized the binding of nine HIV gp120 variants and identified a truncated construct (YU2DV1V2) that bound CCR5 independent of CD4. This construct was used in an affinity purification step to improve the activity of detergent-solubilized receptor by approximately 300%. The biosensor was also used to screen receptor binding activity automatically under 50 different crystallization conditions. We found that high-molecular-weight polyethylene glycols (PEGs 4,000 and 8,000 Da) most often stabilized the receptor and improved complex formation with potential cocrystallization partners such as conformationally sensitive monoclonal antibodies and gp120. Our results show how biosensors can provide unique insights into receptor purification methods and reveal the effects of crystallization conditions on complex formation. Importantly, these methods can be readily applied to other systems.
Antibodies, Monoclonal↗
Kinetic analysis of a high-affinity antibody/antigen interaction performed by multiple Biacore users.
To explore the reliability of Biacore-based assays, 22 study participants measured the binding of prostate-specific antigen (PSA) to a monoclonal antibody (mAb). Each participant was provided with the same reagents and a detailed experimental protocol. The mAb was immobilized on the sensor chip at three different densities and a two-step assay was used to determine the kinetic and affinity parameters of the PSA/mAb complex. First, PSA was tested over a concentration range of 2.5-600 nM to obtain k(a) information. Second, to define the k(d) of this stable antigen/antibody complex accurately, the highest PSA concentration was retested with the dissociation phase of each binding cycle monitored for 1h. All participants collected data that could be analyzed to obtain kinetic parameters for the interaction. The association and the extended-dissociation data derived from the three antibody surfaces were globally fit using a simple 1:1 interaction model. The average k(a) and k(d) for the PSA/mAb interaction as calculated from the 22 analyses were (4.1+/-0.6) x 10(4) M(-1) s(-1) and (4.5+/-0.6) x 10(-5) s(-1), respectively. Overall, the experimental standard errors in the rate constants were only approximately 14%. Based on the kinetic rate constants, the affinity (K(D)) of the PSA/mAb interaction was 1.1+/-0.2 nM.
Antibodies, Monoclonal↗
Screening antibody-antigen interactions in parallel using Biacore A100.
Label-free optical biosensor technology has become a standard tool for characterizing monoclonal antibodies for therapeutic and diagnostic applications. The availability of high-quality binding data at an early stage greatly improves the ability to select antibodies for further development. This article shows how Biacore A100, a protein interaction array system, is capable of providing high-quality data with increased throughput. In a 12-h automated run, we analyzed 386 crude hybridoma samples to identify those with the desired kinetic profiles. Selected antibodies were further characterized by higher resolution analysis, and binding interactions were studied under a range of buffer conditions. We demonstrate how this new parallel processing system significantly expands the throughput of protein interaction analysis while maintaining data quality.
Animals↗
Eosinophil-granule major basic protein, a C-type lectin, binds heparin.
The eosinophil major basic protein (EMBP), a constituent of the eosinophil secondary granule, is implicated in cytotoxicity and mediation of allergic disorders such as asthma. It is a member of the C-type lectin family, but lacks a Ca(2+)- and carbohydrate-binding site as seen in other members of this family. Here, we report the crystal structure of EMBP in complex with a heparin disaccharide and in the absence of Ca(2+), the first such report of any C-lectin with this sugar. We also provide direct evidence of binding of EMBP to heparin and heparin disaccharide by surface plasmon resonance. We propose that the sugars recognized by EMBP are likely to be proteoglycans such as heparin, leading to new interpretations for EMBP function.
Anticoagulants↗
Analyzing a kinetic titration series using affinity biosensors.
The classical method of measuring binding constants with affinity-based biosensors involves testing several analyte concentrations over the same ligand surface and regenerating the surface between binding cycles. Here we describe an alternative approach to collecting kinetic binding data, which we call "kinetic titration." This method involves sequentially injecting an analyte concentration series without any regeneration steps. Through a combination of simulation and experimentation, we show that this method can be as robust as the classical method of analysis. In addition, kinetic titrations can be more efficient than the conventional data collection method and allow us to fully characterize analyte binding to ligand surfaces that are difficult to regenerate.
Antibodies, Monoclonal↗
Measuring long association phases using Biacore.
Explore the source record for details and available documents.
Bacterial Proteins↗
The interaction between tBid and cardiolipin or monolysocardiolipin.
Bid, a BH3-only pro-apoptotic member of the Bcl-2 family, is cleaved by caspase 8 in apoptosis induced by death domain receptors. The carboxyl terminus of the cleavage product, tBid, remains associated with the amino terminal fragment (nBid) after cleavage. Dissociation of tBid from nBid occurs during targeting of tBid to mitochondria. We use an in vitro system and demonstrate that cardiolipin is sufficient for the dissociation. Monolysocardiolipin, a metabolite of cardiolipin that increases in mitochondria during apoptosis, has the same affinity to tBid as cardiolipin and is also capable of inducing dissociation of tBid from nBid. In contrast, phosphatidylethanolamine could not induce dissociation of tBid from nBid. To determine the site of tBid that interacts with cardiolipin, we performed mutational analysis by eliminating the positive-charged residues in helices 4-6. None of the single mutations can abolish the ability of tBid to target to mitochondria and to induce cytochrome c release, suggesting that positive-charged residues in helices 4-6 may not be required for mitochondrial targeting of tBid.
BH3 Interacting Domain Death Agonist Protein↗
Solubilization, stabilization, and purification of chemokine receptors using biosensor technology.
Establishing solubilization conditions for membrane-associated receptors is often a tedious empirical process. Here we describe a novel application of SPR biosensor technology to screen solubilization conditions automatically and to assess receptor activity directly. We focus on two chemokine receptors, CXCR4 and CCR5, which are important in HIV cell invasion. The autosampler in Biacore 3000 permitted whole cells expressing C-terminally tagged receptors to be automatically lysed under a given solubilization condition and the lysates to be injected over an antibody surface. The total amount of solubilized receptor could be quantitated from the antibody capture level, whereas the amount of active receptor could be quantitated using a subsequent injection of conformationally sensitive antibody or protein. Using this approach, we identified detergent/lipid/buffer combinations that enhanced and maintained receptor activity. We also used the biosensor to demonstrate CD4-dependent binding of gp120 to solubilized CCR5 and to develop affinity chromatography-based purification methods that increased receptor activity more than 300%. Together, these results illustrate the benefits of using the biosensor as a tool for isolating functional membrane receptors and for analyzing ligand/receptor interactions.
Automation↗
Crystal structure of the PH-BEACH domains of human LRBA/BGL.
The beige and Chediak-Higashi syndrome (BEACH) domain defines a large family of eukaryotic proteins that have diverse cellular functions in vesicle trafficking, membrane dynamics, and receptor signaling. The domain is the only module that is highly conserved among all of these proteins, but the exact functions of this domain and the molecular basis for its actions are currently unknown. Our previous studies showed that the BEACH domain is preceded by a novel, weakly conserved pleckstrin homology (PH) domain. We report here the crystal structure at 2.4 A resolution of the PH-BEACH domain of human LRBA/BGL. The PH domain has the same backbone fold as canonical PH domains, despite sharing no sequence homology with them. However, our binding assays demonstrate that the PH domain in the BEACH proteins cannot bind phospholipids. The BEACH domain contains a core of several partially extended peptide segments that is flanked by helices on both sides. The structure suggests intimate association between the PH and the BEACH domains, and surface plasmon resonance studies confirm that the two domains of the protein FAN have high affinity for each other, with a K(d) of 120 nM.
Adaptor Proteins, Signal Transducing↗
Comparative analyses of a small molecule/enzyme interaction by multiple users of Biacore technology.
To gauge the experimental variability associated with Biacore analysis, 36 different investigators analyzed a small molecule/enzyme interaction under similar conditions. Acetazolamide (222 g/mol) binding to carbonic anhydrase II (CAII; 30000 Da) was chosen as a model system. Both reagents were stable and their interaction posed a challenge to measure because of the low molecular weight of the analyte and the fast association rate constant. Each investigator created three different density surfaces of CAII and analyzed an identical dilution series of acetazolamide (ranging from 4.1 to 1000 nM). The greatest variability in the results was observed during the enzyme immobilization step since each investigator provided their own surface activating reagents. Variability in the quality of the acetazolamide binding responses was likely a product of how well the investigators' instruments had been maintained. To determine the reaction kinetics, the responses from the different density surfaces were fit globally to a 1:1 interaction model that included a term for mass transport. The averaged association and dissociation rate constants were 3.1+/-1.6 x 10(6)M(-1)s(-1) and 6.7+/-2.5 x 10(-2)s(-1), respectively, which corresponded to an average equilibrium dissociation constant (K(D) of 2.6+/-1.4 x 10(-8)M. The results provide a benchmark of variability in interpreting binding constants from the biosensor and highlight keys areas that should be considered when analyzing small molecule interactions.
Acetazolamide↗
Analysis of small-molecule interactions using Biacore S51 technology.
Biacore S51 is a new surface plasmon resonance-based biosensor developed by Biacore AB (Uppsala, Sweden). The instrument was engineered specifically to support small-molecule drug discovery and development. The platform includes increased sensitivity, larger sample handling capabilities, and automated data processing to improve throughput. Compared to previously released Biacore instruments, the most significant design change relates to the introduction of the hydrodynamic-addressing flow cell. This design allows two reaction surfaces and a reference surface to be placed within the same flow cell, thereby improving data quality and extending the kinetic range of the instrument. Using a set of small-molecule inhibitors of the enzyme carbonic anhydrase II, we tested the reproducibility, sensitivity, and dynamic range of the biosensor. Given the S51's performance capabilities, it should play an active role in secondary screening by providing high-resolution information for small-molecule/target interactions.
Carbonic Anhydrase II↗
Probing the mechanism of drug/lipid membrane interactions using Biacore.
Assay conditions were established to screen a panel of drugs for binding to liposome surfaces using a surface plasmon resonance (SPR) biosensor. Drugs were found to bind negligibly or reversibly or were retained on the liposome surface. Cationic amphiphilic drugs fell into the last class and correlated with drugs that induce phospholipidosis in vivo. To a first approximation, a single-site model yielded apparent binding affinities that adequately described a drug's dose-dependent binding to liposome surfaces. Affinities ranged at least 1000-fold within the drug panel. A liposome's drug-binding capacity and affinity depended on both the lipid headgroup and the drug's structure. Although a drug's charge state generally dominated whether or not it remained bound to the liposome, subtle structural differences between members of certain drug families led to them having widely differing binding affinities. A comparison between the dissociation of drugs from liposome surfaces by Biacore and the lipid retention measurements determined by a parallel artificial membrane permeability assay was drawn. The results from this study demonstrate the potential of using SPR-based assays to characterize drug/liposome-binding interactions.
Adrenergic beta-Antagonists↗