PubMed Health⌕ Search

Biomedical subjects

David G Simpson

Publications and source records attributed to David G Simpson.

13 recordsLinked to original sources
PubMed2007

Electrospun fibrinogen: feasibility as a tissue engineering scaffold in a rat cell culture model.

Fibrinogen has a well-established tissue engineering track record because of its ability to induce improved cellular interaction and scaffold remodeling compared to synthetic scaffolds. While the feasibility of electrospinning fibrinogen scaffolds of submicron diameter fibers and their mechanical properties have been demonstrated, in vitro cellular interaction has not yet been evaluated. The goal of this study was to demonstrate, based on cellular interaction and scaffold remodeling, that electrospun fibrinogen can be used successfully as a tissue engineering scaffold. Electrospun fibrinogen scaffolds were disinfected, seeded with neonatal rat cardiac fibroblasts, and cultured for 2, 7, and 14 days. Cultures were treated to regulate scaffold degradation by either supplementing serum-containing media with aprotinin or crosslinking the scaffolds with glutaraldehyde vapor. Biocompatibility was assessed through a WST-1 cell proliferation assay. Postculture scaffolds were evaluated by scanning electron microscopy and histology. Cell culture demonstrated that fibroblasts readily migrate into and remodel electrospun fibrinogen scaffolds with deposition of native collagen. Supplementation of culture media with different concentrations of aprotinin-modulated scaffold degradation in a predictable fashion, but glutaraldehyde vapor fixation was less reliable. Based on the observed cellular interactions, there is tremendous potential for electrospun fibrinogen as a tissue engineering scaffold.

Animals↗
PubMed2006

Modulation of anisotropy in electrospun tissue-engineering scaffolds: Analysis of fiber alignment by the fast Fourier transform.

We describe the use of the fast Fourier transform (FFT) in the measurement of anisotropy in electrospun scaffolds of gelatin as a function of the starting conditions. In electrospinning, fiber alignment and overall scaffold anisotropy can be manipulated by controlling the motion of the collecting mandrel with respect to the source electrospinning solution. By using FFT to assign relative alignment values to an electrospun matrix it is possible to systematically evaluate how different processing variables impact the structure and material properties of a scaffold. Gelatin was suspended at varying concentrations (80, 100, 130, 150 mg/ml) and electrospun from 2,2,2 trifluoroethanol onto rotating mandrels (200-7000 RPM). At each starting concentration, fiber diameter remained constant over a wide range of mandrel RPM. Scaffold anisotropy developed as a function of fiber diameter and mandrel RPM. The induction of varying degrees of anisotropy imparted distinctive material properties to the electrospun scaffolds. The FFT is a rapid method for evaluating fiber alignment in tissue-engineering materials.

Anisotropy↗
PubMed2006

Dermal templates and the wound-healing paradigm: the promise of tissue regeneration.

Dermal regeneration templates arguably represent the first and most clinically successful 'tissue engineering' solution designed for organ reconstruction. Wound healing in the skin normally occurs on a continuum. At one extreme of the continuum lies the promise of tissue regeneration and the complete restoration of normal structure and function. Unfortunately, in the adult, all too often, wound healing occurs at the other extreme of the continuum and the dermis is reconstituted as scar tissue. Dermal regeneration templates are designed to manage the wound-healing process and tip the scales toward regeneration. This review discusses the architecture and molecular composition of the skin and the events that mediate wound healing and scar formation. The development, evolution and commercialization of dermal templates are examined and the clinical and business considerations that drive the product-development cycle are discussed. In the near term, dermal templates cannot be expected to dramatically change in overall composition. Product development will be dominated by continued refinements of existing templates and the field of use will continue to expand as manufacturers seek to increase revenue and capture market share. Continued exploration of novel processing strategies, such as electrospinning, that can be used to fabricate nanoscale biomaterials, may provide a gateway to the next generation of dermal templates.

Animals↗
PubMed2005

Mechanical properties of electrospun fibrinogen structures.

Fibrin and fibrinogen have a well-established track record in tissue engineering due to their innate ability to induce improved cellular interaction and subsequent scaffold remodeling compared to synthetic scaffolds. Use of fibrinogen as a primary scaffold component, however, has been limited by traditional processing techniques that render scaffolds with insufficient mechanical properties. The goal of this study was to demonstrate, based on mechanical properties, that electrospun fibrinogen overcomes these limitations and can be successful as a tissue engineering scaffold or wound dressing. Electrospun fibrinogen scaffolds were characterized for fiber diameter and pore area and subsequently tested for uniaxial mechanical properties while dry and hydrated. In addition, uniaxial mechanical testing was conducted on scaffolds treated to regulate scaffold degradation in serum-containing media by supplementing the media with aprotinin or cross-linking the scaffolds with glutaraldehyde vapor. A linear relationship between electrospinning solution concentration and measured fiber diameter was seen; fiber diameters ranged from 120 to 610 nm over electrospinning concentrations of 80 to 140 mg/ml fibrinogen, respectively. Pore areas ranged from 1.3 microm(2) to 13 microm(2) over the same fibrinogen concentrations. Aprotinin in the culture media inhibited scaffold degradation in a predictable fashion, but glutaraldehyde vapor fixation produced less reliable results as evidenced by mechanical property testing. In conclusion, the mechanical characteristics of electrospun fibrinogen strongly support its potential use as a tissue engineering scaffold or wound dressing.

Animals↗
PubMed2005

Electrospinning polydioxanone for biomedical applications.

Polydioxanone (PDS) is a colorless, crystalline, bioabsorbable polymer that was first developed specifically for wound closure sutures. The compatibility, degradation rate, and mechanical properties (including shape memory) of PDS are of interest when considering the design of tissue engineering scaffolds. This research presents the electrospinning of PDS to fabricate unique nanofibrous structures for a variety of biomedical applications. Electrospinning is a polymer processing technique that utilizes an electric field to form fibers from a polymer solution or melt and allows the fabrication of nanofibrous non-woven structures. Results demonstrate the ability to control the fiber diameter of PDS as a function of solution concentrations and the fiber orientation with our prototype electrospinning apparatus. The results also show dependence between the fiber orientation and the elastic modulus, peak stress, and strain to failure of PDS in a uniaxial model.

Biocompatible Materials↗
PubMed2004

Utilizing acid pretreatment and electrospinning to improve biocompatibility of poly(glycolic acid) for tissue engineering.

Poly(glycolic acid) (PGA) has a long history as a bioresorbable polymer. Its biocompatibility is widely accepted, yet PGA is often rejected as a soft-tissue scaffold because of fibrous encapsulation. The goal of this study was to improve the soft-tissue biocompatibility of PGA by producing scaffolds composed of small-diameter fibers through electrospinning and subjecting these scaffolds to a concentrated hydrochloric acid (HCL) pretreatment. The theory is that small-diameter fibers will elicit a reduced immune response and HCl treatment will improve cellular interactions. Scaffolds were characterized in terms of fiber diameter and pore area via image-analysis software. Biocompatibility was assessed through a WST-1 cell-proliferation assay (in vitro) with the use of rat cardiac fibroblasts and rat intramuscular implantations (in vivo). Fibers produced ranged in diameter from 0.22 to 0.88 microm with pore areas from 1.84 to 13.22 microm(2). The untreated scaffold composed of 0.88-microm fibers was encapsulated in vivo and supported the lowest rates of cell proliferation. On the contrary, the acid pretreated scaffold with 0.22-microm fibers was incorporated into the surrounding tissue and exhibited proliferation rates that exceeded the control populations on tissue-culture plastic. In conclusion, this study has shown the ability to improve the biocompatibility of PGA through acid pretreatment of scaffolds comprised of submicron fiber diameters.

Animals↗
PubMed2004

Electrospinning collagen and elastin: preliminary vascular tissue engineering.

Significant challenges must be overcome before the true benefit and economic impact of vascular tissue engineering can be fully realized. Toward that end, we have pioneered the electrospinning of micro- and nano-fibrous scaffoldings from the natural polymers collagen and elastin and applied these to development of biomimicking vascular tissue engineered constructs. The vascular wall composition and structure is highly intricate and imparts unique biomechanical properties that challenge the development of a living tissue engineered vascular replacement that can withstand the high pressure and pulsatile environment of the bloodstream. The potential of the novel scaffold presented here for the development of a viable vascular prosthetic meets these stringent requirements in that it can replicate the complex architecture of the blood vessel wall. This replication potential creates an "ideal" environment for subsequent in vitro development of a vascular replacement. The research presented herein provides preliminary data toward the development of electrospun collagen and elastin tissue engineering scaffolds for the development of a three layer vascular construct.

Blood Vessel Prosthesis↗
PubMed2003

Effects of platelet-derived growth factor-AA and -BB on embryonic cardiac development.

Several studies have shown that disruption of the normal expression patterns of platelet-derived growth factor (PDGF) ligands and receptors during development results in gross cardiac defects and embryonic or neonatal death. However, little is known about the specific role that PDGF plays in the differentiation of cardiac myocytes. In experiments complementing studies that utilized naturally-occurring Patch mice lacking the PDGFr alpha, or knockout animals lacking a PDGF ligand or receptor, we used rat and mouse whole-embryo culture (WEC) techniques to increase the exposure of embryos to the PDGF-AA or -BB ligands. Following a 48-hr culture period, we analyzed heart growth and cardiac myocyte differentiation. Exposure of rat embryos to 50 ng/ml of PDGF-AA resulted in a 42% increase in total protein levels in the heart, but did not result in a significant increase in heart growth, as determined by measurements of the atrioventricular length and the left ventricular length and width. Exposure of embryos to 50 ng/ml of PDGF-BB resulted in a 77% increase in total protein levels and a significant (P < 0.05) 8-15% increase in the measured heart parameters. Although a comparison of control and PDGF-AA-treated embryos showed no increase in the overall size of the heart, confocal microscopy showed an increase in the size and number of myofibrillar bundles in the developing myocardium. In addition, transmission electron microscopy (TEM) revealed an increase in the presence of sarcomeres, indicating that myofibrils were more highly differentiated in these areas of the treated embryos. In PDGF-BB-treated embryos, the compact zone of the myocardium was thicker and, as shown by confocal microscopy and TEM, f-actin and well-developed sarcomeres were more prevalent, indicating that the myofibrils were more differentiated in the treated embryos than in the control embryos. These studies indicate that increased exposure of embryonic hearts to PDGF-AA or -BB increases the rate of myocardial development.

Animals↗
PubMed2003

Electrospinning of poly(ethylene-co-vinyl alcohol) fibers.

Solutions of poly(ethylene-co-vinyl alcohol) or EVOH, ranging in composition from 56 to 71 wt% vinyl alcohol, can be readily electrospun at room temperature from solutions in 70% 2-propanol/water (rubbing alcohol). The solutions are prepared at 80 degrees C and allowed to cool to room temperature. Interestingly, the solutions are not stable at room temperature and eventually the polymer precipitates after several hours. However, prior to precipitation, electrospinning is extensive and rapid, allowing coverage of fibers on various substrates, including a grounded metal plate, dielectrics interposed between the charged jet and the metal ground, and on the human body. Fiber diameters of ca. 0.2-8.0 microm were obtained depending upon the solution concentration, an attractive range for tissue engineering, wound healing, and related applications. Electrospun EVOH mats have been shown to support the culturing of smooth muscle cells and fibroblasts.

2-Propanol↗
PubMed2002

Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend.

Electrospun fiber mats are explored as drug delivery vehicles using tetracycline hydrochloride as a model drug. The mats were made either from poly(lactic acid) (PLA), poly(ethylene-co-vinyl acetate) (PEVA), or from a 50:50 blend of the two. The fibers were electrospun from chloroform solutions containing a small amount of methanol to solubilize the drug. The release of the tetracycline hydrochloride from these new drug delivery systems was followed by UV-VIS spectroscopy. Release profiles from the electrospun mats were compared to a commercially available drug delivery system, Actisite (Alza Corporation, Palo Alto, CA), as well as to cast films of the various formulations.

Anti-Bacterial Agents↗
PubMed2002

Development of a continuous respiration olfactometer for odorant delivery synchronous with natural respiration during recordings of brain electrical activity.

The continuous respiration olfactometer (CRO) was designed as a respiration-synchronous method for delivering odorants during recordings of brain electrical activity, providing control and monitoring of the timing of the delivery as well as the quantities of odorant involved. The CRO incorporates a purpose-built electronic system designed with very specific temporal and quantitative characteristics, and is composed of four main parts: the respiratory monitoring apparatus, the odorant/air delivery system, the serial interface device and the respiratory monitoring software. Tests were undertaken to determine the performance of the system with reference to the accuracy and precision of timing and control of odorant delivery. Tests were also undertaken to determine the effects of variations in natural respiration between subjects on the capability of the respiratory monitoring system, using a group of 50 subjects, to test the success of a variable gain control to optimize the range of the digitized respiratory output. The delivery system was able to provide information concerning quantities of air or odorant delivered, and the stimulus timing information required for integration with neurophysiological recording techniques.

1-Butanol↗
PubMedDate not supplied

Electrospinning of collagen nanofibers.

Electrospinning is a fabrication process that uses an electric field to control the deposition of polymer fibers onto a target substrate. This electrostatic processing strategy can be used to fabricate fibrous polymer mats composed of fiber diameters ranging from several microns down to 100 nm or less. In this study, we describe how electrospinning can be adapted to produce tissue-engineering scaffolds composed of collagen nanofibers. Optimizing conditions for calfskin type I collagen produced a matrix composed of 100 nm fibers that exhibited the 67 nm banding pattern that is characteristic of native collagen. The structural properties of electrospun collagen varied with the tissue of origin (type I from skin vs type I from placenta), the isotype (type I vs type III), and the concentration of the collagen solution used to spin the fibers. Electrospinning is a rapid and efficient process that can be used to selectively deposit polymers in a random fashion or along a predetermined and defined axis. Toward that end, our experiments demonstrate that it is possible to tailor subtle mechanical properties into a matrix by controlling fiber orientation. The inherent properties of the electrospinning process make it possible to fabricate complex, and seamless, three-dimensional shapes. Electrospun collagen promotes cell growth and the penetration of cells into the engineered matrix. The structural, material, and biological properties of electrospun collagen suggest that this material may represent a nearly ideal tissue engineering scaffold.

Animals↗