Biomedical subjects

David J Lestage

Publications and source records attributed to David J Lestage.

8 recordsLinked to original sources

PubMed2005

Cocklebur-shaped colloidal dispersions.

Unique cocklebur-shaped colloidal dispersions were prepared using a combination of a nanoextruder applied to the aqueous solution containing methyl methacrylate (MMA) and n-butyl acrylate (n-BA) with azo-bis-isobutyronitrile (AIBN) or potassium persulfate (KPS) initiators and stabilized by a mixture of sodium dioctyl sulfosuccinate (SDOSS) and 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DCPC) phospholipid. Upon extrusion and heating to 75 degrees C, methyl methacrylate/n-butyl acrylate (MMA/nBA) colloidal particles containing tubules pointing outward were obtained as a result of DCPC phospholipids present at the particle surfaces. The same cocklebur-shaped particles were obtained when classical polymerization was used without a nanoextruder under similar compositional and thermal conditions, giving a particle size of 159 nm. However, when Ca(2+) ions are present during polymerization, cocklebur morphologies are disrupted. Because DCPC tubules undergo a transition at 38 degrees C, such cocklebur morphologies may offer numerous opportunities for devices with stimuli-responsive characteristics.

Letter↗

PubMed2005

Stimuli-responsive surface localized ionic cluster (SLICs) formation from nonspherical colloidal particles.

Structural features of phospholipids provide a unique opportunity for utilizing these amphiphilic species to stabilize the synthesis of colloidal dispersion particles by controlling concentration levels relative to dispersion synthesis components. 1,2-Bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DCPC) phospholipid was utilized as cosurfactant in the synthesis of sodium dioctyl sulfosuccinate (SDOSS) stabilized methyl methacrylate/n-butyl acrylate (MMA/nBA) colloidal dispersions. Aqueous dispersions containing various concentration levels of DCPC result in the formation of cocklebur particle morphologies, and when prepared in the presence of Ca2+ and annealed at various temperatures, stimuli-responsive behaviors of coalesced films were elucidated. The formation of surface localized ionic clusters (SLICs) at the film-air (F-A) and film-substrate (F-S) interfaces is shown to be responsive to concentration levels of DCPC, Ca2+/DCPC ratios, and temperature. These studies show that it is possible to control stratification and mobility to the F-A and F-S interfaces during and after coalescence. Using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and internal reflection infrared imaging (IRIRI) spectroscopies, molecular entities responsible for SLIC formation were determined. These studies also show that stimuli-responsive behaviors during film formation can be controlled by colloidal solution morphologies and synergistic interactions of individual components.

Journal Article↗

PubMed2005

Hollow colloidal particles obtained by nano-extrusion in the presence of phospholipids.

Using nano- and microsize extrusion, a simple synthetic procedure of preparing hollow monodispersed colloidal particles dispersed in an aqueous phase was developed. Hydrophobic styrene monomer containing 2-hydroxy-2-methyl propiophenone photoinitiator was forced into desired diameter membrane channels and stabilized by the hydrophobic regions of a liposome obtained from 1,2-dilauroyl-phosphocholine phospholipid in an aqueous phase. Such moieties exposed to 254-nm UV radiation polymerize monomers in the hydrophobic zone of the liposome, thus resulting in reinforced hollow vesicles. The size of such particles is controlled by the size of the membrane channels in the extruder and may vary from a few nanometers to micrometers, thus allowing the synthesis of monodisperse hollow colloidal spheres.

Letter↗

PubMed2005

Release and formation of surface-localized ionic clusters (SLICs) into phospholipid rafts from colloidal solutions during coalescence.

Stimuli-responsive behavior of phospholipids in the presence of ionic surfactants utilized in synthesis of MMA/nBA colloidal particles was investigated. Utilizing 1-myristoyl-2-hydroxy-sn-glycero-phosphocholine (MHPC) phospholipid, and sodium dioctyl sulfosuccinate (SDOSS) surfactant as dispersing media in H(2)O, narrow unimodal particle size distributions of methyl methacrylate (MMA)/n-butyl acrylate (nBA) copolymers were synthesized. The particle diameters were 154 nm when a SDOSS/MHPC mixture was used and 161 nm using MHPC as the only surface-stabilizing species. When such colloidal dispersions are exposed to 1.7, 3.3, and 6.7 mM aqueous CaCl(2) and KCl electrolyte solutions, surface-localized ionic clusters are generated at the film-air interface that may serve as lipid rafts composed of crystalline phases of MHPC deposited on poly(MMA)/nBA films. These studies illustrate that it is possible to control release and morphology developments of surface phospholipid rafts on artificial surfaces.

Colloids↗

PubMed2004

Stimuli-responsive surface crystallization of phospholipids from bimodal colloidal particles.

These studies focus on the effect of phospholipids in the presence of ionic surfactants on the behavior of poly(methylmethactrylate/n-butyl acrylate) (p-MMA/nBA) colloidal particles during film formation. With the presence of two surfactants, it is possible to obtain particles that exhibit two distinct particle sizes. The presence of hydrogenated soybean phosphatidylcholine (HSPC) and sodium dioctyl sulfosuccinate (SDOSS), which stabilize these bimodal colloidal dispersions, has a significant effect on the mobility of individual components during coalescence. Specifically, the presence of HSPC inhibits migration of SDOSS to the film-air (F-A) interface. Furthermore, the presence of electrolyte species such as aqueous CaCl2 has a very pronounced effect on film formation. When the Ca2+/HSPC ratio is 0.1/1.0, SDOSS is released to the F-A interface during coalescence. At 2.0/1.0 Ca2+/HSPC, HSPC diffuses to the F-A interface and crystalline domains consisting of HSPC are formed. This stimuli-responsive behavior is confirmed using IRIR imaging that ultimately exhibits different surface morphologies. These studies illustrate for the first time that it is possible to control the release of two different surface-active species during coalescence that form crystalline domains.

Acrylates↗

PubMed2004

Particle morphology as a control of permeation in polymer films obtained from MMA/nBA colloidal dispersions.

The combination of precision-controlled weight loss measurements and spectroscopic surface FT-IR analysis allowed us to identify unique behaviors of poly(methyl methacrylate) (p-MMA). When MMA and n-butyl acrylate (nBA) are polymerized into p-MMA and p-nBA homopolymer blends, MMA/nBA random copolymers, and p-MMA/p-nBA core-shell morphologies, a controlled mobility and stratification of low molecular weight components occurs in films formed from coalesced colloidal dispersions. Due to different affinities toward water, p-MMA and p-nBA are capable of releasing water at different rates, depending upon particle morphological features of initial dispersions. As coalescence progresses, water molecules are released from the high free volume p-nBA particles, whereas p-MMA retains water molecules for the longest time due to its hydrophilic nature. As a result, water losses at extended coalescence times are relatively small for p-MMA. MMA/nBA copolymer and p-MMA/p-nBA blends follow the same trends, although the magnitudes of changes are not as pronounced. The p-MMA/p-nBA core-shell behavior resembles that of p-nBA homopolymer, which is attributed to significantly lower content of the p-MMA component in particles. Annealing of coalesced colloidal films at elevated temperatures causes migration of SDOSS to the F-A interface, but for films containing primarily p-nBA, reverse diffusion back into the bulk is observed. These studies illustrate that the combination of different particle morphologies and temperatures leads to controllable permeation processes through polymeric films.

Journal Article↗

PubMedDate not supplied

Stimuli-responsive surfactant/phospholipid stabilized colloidal dispersions and their film formation.

Methyl methacrylate (MMA) and n-butyl acrylate (nBA) were copolymerized into stable colloidal particles in the presence of micelle forming sodium dioctyl sulfosuccinate (SDOSS) and liposome forming 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) in aqueous media that serve as thermodynamically stable loci for lipophilic monomers and nanostructured templates. These studies show for the first time that hollow colloidal particles may coalesce to form polymeric films and the combination of SDOSS and DLPC dispersing agents provides a stimuli-responsive environment during film formation through which individual surface stabilizing components can be driven to the film-air (F-A) or film-substrate (F-S) interface. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) of p-MMA/nBA colloidal dispersions revealed preferential and enhanced mobility of SDOSS and DLPC lipid rafts to the F-A and F-S interfaces in response to thermal, ionic, and enzymatic stimuli.

Colloids↗

PubMedDate not supplied

Film formation from colloidal dispersions stabilized by sugar derivatives and their controllable release for selective protein adsorption.

Although the use of sugar and sugar derivatives has been documented in polymer research for many years, there are no reports that would utilize these species as polymerization sites of colloidal polymeric particles that, later on, may be released during particle coalescence to form films with surfaces that differentiate protein adsorption. These studies show that, when n-dodecyl-beta-D-maltoside (DDM) is utilized for the synthesis and stabilization of poly[methyl methacrylate-co-(n-butyl acrylate)] (p-MMA/nBA) colloidal particles, upon particle coalescence DDM stratifies near the film-air (F-A) interface. By using attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and internal reflection infrared imaging (IRIRI), comparative adsorption studies on p-MMA/nBA surfaces exposed to globulin (Glo), fibrinogen (Fib), and bovine serum albumin (BSA) reveal that the presence of DDM selectively inhibits Glo and Fib adsorption, but does not affect BSA. The presence of DDM also enhances the rate of mobility of sodium dioctylsulfosuccinate (SDOSS) resulting from interactions between DDM and SDOSS moieties, and the surface morphologies change as a result of concentration variations of DDM in the colloidal dispersions.

Acrylates↗