Biomedical subjects

David J Neivandt

Publications and source records attributed to David J Neivandt.

6 recordsLinked to original sources

PubMed2006

Adsorption of sodium dodecyl sulfate at the hydrophobic solid/aqueous solution interface in the presence of poly(ethylene glycol): dependence upon polymer molecular weight.

The polar orientation and degree of conformational order of sodium dodecyl sulfate (SDS) adsorbed at the hydrophobic octadecanethiol/aqueous solution interface in the presence of poly(ethylene glycol) (PEG) has been investigated as a function of the surfactant concentration and the molecular weight of the polymer. Sum frequency generation (SFG) vibrational spectroscopy was employed to obtain spectra of interfacial surfactant; weak SFG signals from interfacial polymer were also detected for polymer molecular weights of 900 and above. The phase of the SFG spectra indicated that both the surfactant and polymer had a net orientation of their CH2 and/or CH3 groups toward the hydrophobic surface. Spectra of SDS in the presence of mixed polymer/surfactant solutions showed increasing conformational order as the surfactant concentration was raised. At the lowest surfactant concentrations, the spectra of SDS were weaker in the presence of the polymer than in its absence. All PEG molecular weights investigated, with the exception of PEG 400, gave rise to significant inhibition of ordered surfactant adsorption below the critical micelle concentration. The greatest inhibitory effect was noted for PEG 900. Probing interfacial PEG specifically through the use of perdeuterated SDS revealed that the polymer spectral intensity decreased monotonically as the surfactant concentration was increased for all polymer molecular weights where a PEG spectrum was apparent. These findings are interpreted in terms of the displacement of preadsorbed polymer as the surfactant concentration increases. This result is compatible with observations of adsorption from SDS/PEG solutions at solid/solution and solution/air interfaces made using other techniques.

Adsorption↗

PubMed2005

Sum frequency generation from Langmuir-Blodgett multilayer films on metal and dielectric substrates.

Sum frequency generation (SFG) vibrational spectra of cadmium arachidate multilayer films adsorbed on a substrate with high nonresonant susceptibility, i.e., gold, and on a low nonresonant susceptibility substrate, i.e., fused quartz, have been investigated in the C-H stretching region in air. The films were formed by Langmuir-Blodgett (LB) deposition and their spectra recorded using SFG spectrometers employing both 532-nm nanosecond and 800-nm femtosecond lasers, with counter-propagating and co-propagating beam geometries, respectively. Both kinds of substrate were rendered hydrophobic by coating them with per-deuterated octadecanethiol (gold) or per-deuterated cadmium arachidate (fused quartz) monolayers. Single per-protonated arachidate layers in otherwise per-deuterated 10-layer films were used to show that the SFG resonances arise only from the topmost and lowermost layers in a LB film comprised of an even number of per-protonated layers, although the SFG spectra from the two hydrophobic substrates are different from each other. The differences in the spectra from the same ten-layer per-protonated films deposited on the two types of hydrophobic substrate have been explained in terms of a simple model that accounts for resonant and nonresonant contributions.

Adsorption↗

PubMed2005

Development of a biologically relevant calcium phosphate substrate for sum frequency generation vibrational spectroscopy.

A novel biologically relevant composite substrate has been prepared consisting of a calcium phosphate (CaP) layer formed by magnetron sputter-coating from a hydroxyapatite (HA) target onto a gold-coated silicon substrate. The CaP layer is intended to mimic tooth and bone surfaces and allows polymers used in oral care to be deposited in a procedure analogous to that used for dental surfaces. The polymer cetyl dimethicone copolyol (CDC) was deposited onto the CaP surface of the substrate by Langmuir Blodgett deposition, and the structure of the adsorbed layer was investigated by the surface specific technique of sum frequency generation (SFG) vibrational spectroscopy. The gold sublayer provides enhancement of the SFG signal arising from the polymer but plays no part in the adsorption of the polymer. The surface morphology of the substrate was investigated using SEM and AFM. The surface roughness was commensurate with that of the thermally evaporated gold sublayer and uniform over areas of at least 36 mum(2). The chemical composition of the CaP-coated surface was determined by FTIR and TOF-SIMS. It was concluded that the surface is primarily calcium phosphate present as a mixture of amorphous, non-hydroxylated phases rather than solely stoichiometric hydroxyapatite. The SFG spectra from CDC on CaP were closely similar, both in resonance wavenumbers and in their relative intensities, with spectra of thin films of CDC recorded directly on gold. Application of previous analysis of the spectra of CDC on gold therefore enabled interpretation of the polymer orientation and conformation on the CaP substrate.

Adsorption↗

PubMed2005

Templated surfactant readsorption on polyelectrolyte-induced depleted surfactant surfaces.

Changes in the structure of a surfactant adsorbed on oxidized silicon arising from interaction with a polyelectrolyte have been studied using polarized infrared attenuated total reflection spectroscopy. Specifically, the cationic surfactant cetyltrimethylammonium bromide (CTAB) was found to form a highly ordered layer on oxidized silicon at a concentration of 5.5 x 10(-5) M and a pH of 9.6. Addition of a solution of the anionic polyelectrolyte poly(styrenesulfonate) to the ordered CTAB layer resulted in a rapid and dramatic decrease in the surface excess of CTAB. Interestingly however, the interfacial order of the residual surfactant was retained for a time period greater than 1 h, before decreasing. Reintroduction of a surfactant solution prior to destabilization of the residual interfacial CTAB resulted in the readsorption of the surfactant, the recovery of the initial equilibrium coverage, and the maintenance of an ordered CTAB conformation. This desorption/readsorption process may be subsequently repeated without destroying the order of the CTAB on the surface. If however sufficient time is allowed for the residual interfacial surfactant to destabilize prior to readdition of CTAB, the degree of surfactant order remains low, despite the rapid reobtainment of a surface excess equal to or greater than that initially measured. These results are interpreted in terms of polymer/surfactant interfacial complexation and the removal of adsorbed surfactant into solution. The ordering behavior of the residual surfactant suggests that CTAB is left on the surface in isolated patches of highly ordered species that maintain their order until two-dimensional diffusion leads to a more homogeneous surfactant surface distribution and hence the loss of conformational order. The degree of orientation order assumed by surfactant readsorbing on a depleted surface appears to be templated by the order of the residual interfacial surfactant, suggestive of a two-dimensional epitaxial growth mechanism for CTAB readsorption.

Journal Article↗

PubMed2004

Studying nanoparticle-induced structural changes within fatty acid multilayer films using sum frequency generation vibrational spectroscopy.

The nonlinear optical technique of sum frequency generation (SFG) vibrational spectroscopy has been used for the first time to study CdS nanoparticle/arachidic acid multilayer structures. Using a combination of per-deuterated and per-protonated arachidic acid, it is possible to study individual layers anywhere within the film, buried or on the surface. Before reaction with H2S all layers are highly ordered, but after the reaction the layers become highly disordered, except for the surface layer, which remains well ordered. This sheds new light on the structure and stability of these films and shows that SFG can provide unique structural information.

Cadmium Compounds↗

PubMed2004

Protein deformation of lipid hybrid bilayer membranes studied by sum frequency generation vibrational spectroscopy.

Structural deformations of lipid hybrid bilayer membranes induced by signal peptideless (SPL) proteins have been studied for the first time using the inherently surface specific nonlinear optical technique of sum frequency generation vibrational spectroscopy. Specifically, deformations of 1,2-distearoylphosphatidylglycerol(DSPG) membranes induced by interaction with FGF-1, a SPL protein which is released asa function of cellular stress through a nonclassical pathway, have been investigated. FGF-1 was found to induce lipid alkyl chain deformations in previously highly ordered DSPG membranes at the extremely low concentration of 1 nM at 60 degrees C. The deformation process was shown to exhibit a degree of reversibility upon removal of the protein by rinsing with buffer solution.

Fibroblast Growth Factor 1↗