Cationic terminal borylene complexes: structure/bonding analysis and [4+1] cycloaddition reactivity of a BN vinylidene analogue.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to David J Willock.
Explore the source record for details and available documents.
The reactivity of several transition metal half sandwich complexes towards an anionic gallium(I) heterocyclic complex, [K(tmeda)][Ga{[N(Ar)C(H)]2}](Ar = C6H3Pri2-2,6), has been investigated. This has led to the anionic half sandwich complexes, [K(tmeda)][(C5H4R)M(CO)n[Ga{[N(Ar)C(H)]2}]](M = V, R = H, n= 3; M = Mn, R = Me, n= 2; M = Co, R = H, n= 1), which crystallographic studies show to form dimers (M = Mn and Co) or a polymer (M = V) through bridging potassium cations. The metal-gallium bond lengths in all complexes are very short which, combined with some spectroscopic evidence, is suggestive of M-Ga pi-bonding. Density functional theory studies of models of all complexes indicate that the level of back-bonding in these complexes is, however, minimal and of a similar order to that seen in analogous complexes incorporating neutral N-heterocyclic carbene ligands. Reactions of the metallocenes, [M(C5H4Me)2](M = V or Cr), with the digallane4, [Ga{[N(Ar)C(H)]2}]2, have afforded the neutral complexes, [M(C5H4Me)2[Ga{[N(Ar)C(H)]2}]], which are thought to be formed via an initial oxidative insertion of the transition metal centre into the Ga-Ga bond of the digallane. X-Ray crystallography shows the complexes to be monomeric. One (M = V) reacts with one equivalent of [K(tmeda)][Ga{[N(Ar)C(H)]2}] to give the crystallographically characterised, anionic bis(gallyl)-complex, [K(tmeda)][V(C5H4Me)2[Ga{[N(Ar)C(H)]2}]2]. For comparison, the reaction of [K(tmeda)][Ga{[N(Ar)C(H)]2}] with [Mn{CH(SiMe3)2}2] was carried out and gave the monomeric, anionic complex, [K(tmeda)][Mn{CH(SiMe3)2}2[Ga{[N(Ar)C(H)]2}]].
We apply periodic density functional theory to alpha-MoO3 and its (010) surface. The formation energy and structure of defects in the form of surface oxygen vacancies are found to depend critically on the treatment of electron localisation which is achieved in the periodic model using the DFT + U method. Calculated vibrational states for the defect free surface are found to agree well with surface science experimental data and we show that the molybdenyl stretching mode is shifted to a lower frequency in the neighbourhood of a terminal oxygen vacancy. Adsorption of molecular oxygen at the defect site can result in O2, O2(-) or O2(2-) surface species depending on the geometry of adsorption.
Phase behaviour studies of low molecular weight poly(ethylene glycol) (denoted PEG 600 and PEG 1000, corresponding to molecular weights of 600 and 1000 g mol(-1), respectively) have been carried out in 2H,3H-perfluoropentane (HPFP) with and without added poly(vinyl pyrrolidone). The concentration and temperature dependencies of their phase behaviour and the effect of moisture on these systems have been established. Furthermore, the solubility of PEG 600 in binary mixtures of HPFP and perfluoropentane (PFP), as well as HPFP and perfluorodecalin (PFD) have been considered at high HPFP contents. A phase separation phenomenon in fluorinated non-aqueous media is reported for the first time: PEG 600 and PEG 1000 both show a lower critical solution temperature type phase separation boundary. The size of the PEGs was obtained from small-angle neutron scattering (radius of gyration) and pulsed-gradient spin-echo NMR (hydrodynamic radius) measurements. It is shown that polymer conformation follows a regular trend with solution concentration; the size increases from <10 A at 3 wt% in HPFP to 45 +/- 2 A at 20 wt% PEG. On changing the solvent composition by substitution of HPFP by PFP or PFD, the size decreases, consistent with a decrease in the hydrogen-bonding capacity of the solvent mixture. Computer modelling indicates an interaction between the PEG oxygen and the hydrogen of HPFP, an interaction that is absent for the fully fluorinated solvents. This indicates that hydrogen bonding is the driving force for polymer solubility in these solvents.
Electron nuclear double resonance (ENDOR) spectroscopy was used to investigate the weak enantioselective binding between chiral salen complexes [VO(1)] ((R,R)- and (S,S)-vanadyl N,N'-bis(3,5-di-tert-butylsalcylidene)-1,2-cyclohexanediamine) and chiral epoxides (e.g., (R)-/(S)-propylene epoxide, 5) in frozen (10 K) solution. Differences in epoxide binding by enatiomers of [VO(1)] was evidenced by changes to the 1H epoxide derived peaks in the ENDOR spectra, such that (R,R)-[VO(1)] + (R)-5 and (R,R)-[VO(1)] + (S)-5 yield noticeably different spectra. These changes were assigned to the small structural differences between the diastereomeric metal-epoxide adducts. Simulation of the spectra revealed differences in the VO...1Hepoxide distances for the diastereomeric pairs, which was confirmed by a complementary set of density functional theory (DFT) calculations. While the epoxide molecule is very weakly coordinated, ENDOR measurements of the racemic complex in racemic epoxide nevertheless indicated the preferential coordination of the (R)-5 to (R,R)-[VO(1)] (likewise (S)-(5) to (S,S)-[VO(1)]), which is favored over the binding of (S)-5 epoxide to (R,R)-[VO(1)] (and likewise (R)-5 epoxide to (S,S)-[VO(1)]). This demonstrates the unique power of the ENDOR technique to resolve weak chiral interactions for which EPR spectroscopy alone lacks sufficient resolution.
The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.
A series of DFT calculations has been carried out with the aim of characterizing the metal-group 13 element interaction in the novel cationic borylene complex [(eta5-C2Me5)Fe(CO)2(BMes)]+ (1) and related species of the type [eta5-C5R5)M(L)2(EX)]n+. In addition, comparisons have been made with charge neutral borylene complexes and with related group 14 based ligand systems (e.g. cationic metal carbonyls, carbenes and vinylidenes) for which models of bonding have previously been established. In this regard particular attention has been focused on the interpretation of (i) molecular orbital composition; (ii) bond dissociation energies (BDEs) and the ratio of ionic to covalent contributions (DeltaEelstat/DeltaEorb); and (iii) sigma and pi symmetry covalent contributions. The molecular orbital compositions for the prototype borylene complex 1 and for related cationic and neutral systems [e.g.[(eta5-C5H5)Fe(PMe3)2(BMes)]+ and (eta5-C5H5)Mn(CO2(BMes)]] are consistent with the presence of bonding interactions between metal and borylene fragments of both sigma and pi symmetry. Furthermore, on the basis of BDEs, DeltaEorb values and sigma/pi covalent ratios, the bonding in cationic terminal borylene complexes such as 1 appears to have as much right to be termed a M=E double bond as does that in archetypal Fischer carbene and related complexes such as [(eta5-C5R5)Fe(CO)2(CCMe2)]+ and [(eta5-C5R5)Fe(CO)2(CH2)]+.
This communication reports the synthesis and characterization of the cationic iron complex [((eta5-C5Me5)Fe(CO)2))2Ga]+[BAr(f)4]- [Ar(f) = C6H3(CF3)2-3,5] containing a symmetrically bridging two-coordinate gallium atom and a delocalised Fe-Ga-Fe pi system incorporating partial Fe-Ga multiple bond character.
Pt supported on alpha-Al2O3, gamma-Al2O3 and SiO2 pre-modified with cinchonidine gives over 50% ee in the hydrogenation of methyl pyruvate to methyl lactate using gas phase reactants at 40 degrees C giving the first clear observation of high enantioselection at the gas/solid interface.
The synthesis and the spectroscopic and structural characterization of the cationic terminal borylene complex [Cp*Fe(CO)2(BMes)]+ are reported. Halide abstraction from the corresponding bromoboryl species using Na[BAr f4] generates the borylene as the [BAr f4]- salt in ca. 50% yield. Analyses of IR, NMR, crystallographic, and DFT data are consistent with the presence of an Fe=B double bond.