Biomedical subjects

David K Hsu

Publications and source records attributed to David K Hsu.

3 recordsLinked to original sources

PubMed2006

Nondestructive testing using air-borne ultrasound.

Over the last two decades, more efficient transducers were developed for the generation and reception of air-borne ultrasound, thus enabling the non-contact, non-contaminating inspection of composite laminates and honeycomb structures widely used in the aerospace industry. This paper presents the fundamentals of making air-borne ultrasonic measurement, and point out special considerations unique to propagating ultrasound in air and through solids. Transducer beam profile characterization, thickness dependence and resonance effects in the transmission of air-coupled ultrasound through plates, and the detection and imaging of defects and damage in solid laminates and honeycomb sandwich will be discussed and illustrated with examples. Finally, a manual scan system developed for implementing air-borne ultrasonic imaging in the field and on aircraft will be introduced.

Journal Article↗

PubMed2004

Prediction of interlaminar shear strength of a thermally aged carbon/epoxy composite material by Fourier transform infrared photoacoustic spectroscopy.

Photoacoustic spectroscopy was used to predict the interlaminar shear strength of a carbon/epoxy composite. Samples were artificially aged by exposing the samples to elevated temperatures in an air environment. Short-beam shear tests were performed to determine mechanically the interlaminar shear strength of the samples. Photoacoustic spectra of the samples were also collected and compared to mechanical data. Chemometrics were performed on the spectral and mechanical data, and a good correlation was found between the near surface chemistry of the composite and overall mechanical integrity.

Acoustics↗

PubMed2002

A model and experimental study of fiber orientation effects on shear wave propagation through composite laminates.

The strong elastic anisotropy of the discrete unidirectional plies in a composite laminate interacts sensitively with the polarization direction of a shear ultrasonic wave propagating in the thickness direction. The transmitted shear wave can therefore be used to detect errors in the ply orientation and stacking sequence of a laminate. The sensitivity is particularly high when the polarization directions of the shear wave transmitter and receiver are orthogonal to each other. To understand the interaction between normal-incident shear waves and ply orientations in a laminate, a complete analytical model was developed using local and global transfer matrices. The model predicted the transmitted signal amplitude as a function of polarization angle of the transmitter and time (or frequency) for a given laminate and input signal. To alleviate the experimental problems associated with shear wave coupling, electromagnetic acoustic transducers (EMATs) and metal delay lines were used in the angular scan of the transmitted signal. The EMAT system had the added advantage of being applicable to uncured composite laminates. Experiments were performed on both cured and uncured laminates with common layups for model verification. The sensitivity of the measured shear wave signals to fiber misorientation and stacking sequence errors was also demonstrated.

Acoustics↗