PubMed Health⌕ Search

Biomedical subjects

David L Stokes

Publications and source records attributed to David L Stokes.

18 recordsLinked to original sources
PubMed2006

Comparison of lymphoblast mitochondria from normal subjects and patients with Barth syndrome using electron microscopic tomography.

Barth syndrome (BTHS) is a mitochondrial disorder that is caused by mutations in the tafazzin gene, which affects phospholipid composition. To determine whether this defect leads to alterations in the internal three-dimensional organization of mitochondrial membranes, we applied electron microscopic tomography to lymphoblast mitochondria from BTHS patients and controls. Tomograms were formed from 50 and 150 nm sections of chemically fixed lymphoblasts and the data were used to manually segment volumes of relevant structural details. Normal lymphoblast mitochondria contained well-aligned, lamellar cristae with slot-like junctions to the inner boundary membrane. In BTHS, mitochondrial size was more variable and the total mitochondrial volume per cell increased mainly due to clusters of fragmented mitochondria inside nuclear invaginations. However, mitochondria showed reduced cristae density, less cristae alignment, and inhomogeneous cristae distribution. Three-dimensional reconstruction of BTHS mitochondria revealed zones of adhesion of the opposing inner membranes, causing obliteration of the intracrista space. We found small isolated patches of adhesion as well as extended adhesion zones, resulting in sheets of collapsed cristae packaged in multiple concentric layers. We also found large tubular structures (diameter 30-150 nm) that appeared to be derivatives of the adhesion zones. The data suggest that mitochondrial abnormalities of BTHS involve adhesions of inner mitochondrial membranes with subsequent collapse of the intracristae space.

Acyltransferases↗
PubMed2006

Role of metal-binding domains of the copper pump from Archaeoglobus fulgidus.

CopA from the extreme thermophile Archaeoglobus fulgidus is a P-type ATPase that transports Cu(+) and Ag(+) and has individual metal-binding domains (MBDs) at both N- and C-termini. We expressed and purified full-length CopA as well as constructs with MBDs deleted either individually or collectively. Cu(+) and Ag(+)-dependent ATPase assays showed that full-length CopA had submicromolar affinity for both ions, but was inhibited by concentrations above 1muM. Deletion of both MBDs had no effect on affinity but resulted in loss of this inhibition. Individual deletions implicated the N-terminal MBD in causing the inhibition at concentrations >1muM. Rates of phosphoenzyme decay indicated that neither the dephosphorylation step, nor the E1P-E2P equilibrium accounted for this inhibition, suggesting the involvement of a different catalytic step. Alternative hypotheses are discussed by which the N-terminal MBD could influence the catalytic activity of CopA.

Adenosine Triphosphatases↗
PubMed2006

Application of the iterative helical real-space reconstruction method to large membranous tubular crystals of P-type ATPases.

Since the development of three-dimensional helical reconstruction methods in the 1960's, advances in Fourier-Bessel methods have facilitated structure determination to near-atomic resolution. A recently developed iterative helical real-space reconstruction (IHRSR) method provides an alternative that uses single-particle analysis in conjunction with the imposition of helical symmetry. In this work, we have adapted the IHRSR algorithm to work with frozen-hydrated tubular crystals of P-type ATPases. In particular, we have implemented layer-line filtering to improve the signal-to-noise ratio, Wiener-filtering to compensate for the contrast transfer function, solvent flattening to improve reference reconstructions, out-of-plane tilt compensation to deal with flexibility in three dimensions, systematic calculation of Fourier shell correlations to track the progress of the refinement, and tools to control parameters as the refinement progresses. We have tested this procedure on datasets from Na(+)/K(+)-ATPase, rabbit skeletal Ca(2+)-ATPase and scallop Ca(2+)-ATPase in order to evaluate the potential for sub-nanometer resolution as well as the robustness in the presence of disorder. We found that Fourier-Bessel methods perform better for well-ordered samples of skeletal Ca(2+)-ATPase and Na(+)/K(+)-ATPase, although improvements to IHRSR are discussed that should reduce this disparity. On the other hand, IHRSR was very effective for scallop Ca(2+)-ATPase, which was too disordered to analyze by Fourier-Bessel methods.

Animals↗
PubMed2006

Cross-linking of C-terminal residues of phospholamban to the Ca2+ pump of cardiac sarcoplasmic reticulum to probe spatial and functional interactions within the transmembrane domain.

Interactions between the transmembrane domains of phospholamban (PLB) and the cardiac Ca2+ pump (SERCA2a) have been investigated by chemical cross-linking. Specifically, C-terminal, transmembrane residues 45-52 of PLB were individually mutated to Cys, then cross-linked to V89C in the M2 helix of SERCA2a with the thiol-specific cross-linking reagents Cu2+-phenanthroline, dibromobimane, and bismaleimidohexane. V49C-, M50C-, and L52C-PLB all cross-linked strongly to V89C-SERCA2a, coupling to 70-100% of SERCA2a molecules. Residues 45-48 and 51 of PLB also cross-linked to V89C of SERCA2a, but more weakly. Evidence for the mechanism of PLB regulation of SERCA2a was provided by the conformational dependence of cross-linking. In particular, the required absence of Ca2+ for cross-linking implicated the E2 conformation of SERCA2a, and its enhancement by ATP confirmed E2 x ATP as the conformation with the highest affinity for PLB. In contrast, E2 phosphorylated with inorganic phosphate (E2P) and E2 inhibited by thapsigargin (E2 x TG) both failed to cross-link to PLB. These results with transmembrane PLB residues are completely consistent with cytoplasmic PLB residues studied previously, suggesting that the dissociation of PLB from the Ca2+ pump is complete, not partial, when the pump binds Ca2+ (E1 x Ca2) or adopts the E2P or E2 x TG conformations. V49C of PLB cross-linked to 100% of SERCA2a molecules, suggesting that this residue might have functional importance for regulation. Indeed, we found that mutation of Val49 to smaller side-chained residues V49A or V49G augmented PLB inhibition, whereas mutation to the larger hydrophobic residue, V49L, prevented PLB inhibition. A model for the interaction of PLB with SERCA2a is presented, showing that Val49 fits into a constriction at the lumenal end of the M2 helix of SERCA, possibly controlling access of PLB to its binding site on SERCA.

Animals↗
PubMed2006

Interactions between Ca2+-ATPase and the pentameric form of phospholamban in two-dimensional co-crystals.

Phospholamban (PLB) physically interacts with Ca(2+)-ATPase and regulates contractility of the heart. We have studied this interaction using electron microscopy of large two-dimensional co-crystals of Ca(2+)-ATPase and the I40A mutant of PLB. Crystallization conditions were derived from those previously used for thin, helical crystals, but the addition of a 10-fold higher concentration of magnesium had a dramatic effect on the crystal morphology and packing. Two types of crystals were observed, and were characterized both by standard crystallographic methods and by electron tomography. The two crystal types had the same underlying lattice, which comprised antiparallel dimer ribbons of Ca(2+)-ATPase molecules previously seen in thin, helical crystals, but packed into a novel lattice with p22(1)2(1) symmetry. One crystal type was single-layered, whereas the other was a flattened tube and therefore double-layered. Additional features were observed between the dimer ribbons, which were substantially farther apart than in previous helical crystals. We attributed these additional densities to PLB, and built a three-dimensional model to show potential interactions with Ca(2+)-ATPase. These densities are most consistent with the pentameric form of PLB, despite the use of the presumed monomeric I40A mutant. Furthermore, our results indicate that this pentameric form of PLB is capable of a direct interaction with Ca(2+)-ATPase.

Animals↗
PubMed2005

Structural studies of a stabilized phosphoenzyme intermediate of Ca2+-ATPase.

Ca(2+)-ATPase belongs to the family of P-type ATPases and maintains low concentrations of intracellular Ca(2+). Its reaction cycle consists of four main intermediates that alternate ion binding in the transmembrane domain with phosphorylation of an aspartate residue in a cytoplasmic domain. Previous work characterized an ultrastable phosphoenzyme produced first by labeling with fluorescein isothiocyanate, then by allowing this labeled enzyme to establish a maximal Ca(2+) gradient, and finally by removing Ca(2+) from the solution. This phosphoenzyme is characterized by very low fluorescence and has specific enzymatic properties suggesting the existence of a high energy phosphoryl bond. To study the structural properties of this phosphoenzyme, we used cryoelectron microscopy of two-dimensional crystals formed in the presence of decavanadate and determined the structure at 8-A resolution. To our surprise we found that at this resolution the low fluorescence phosphoenzyme had a structure similar to that of the native enzyme crystallized under equivalent conditions. We went on to use glutaraldehyde cross-linking and proteolysis for independent structural assessment and concluded that, like the unphosphorylated native enzyme, Ca(2+) and vanadate exert a strong influence over the global structure of this low fluorescence phosphoenzyme. Based on a structural model with fluorescein isothiocyanate bound at the ATP site, we suggest that the stability as well as the low fluorescence of this phosphoenzyme is due to a fluorescein-mediated cross-link between two cytoplasmic domains that prevents hydrolysis of the aspartyl phosphate. Finally, we consider the alternative possibility that phosphate transfer to fluorescein itself could explain the properties of this low fluorescence species.

Animals↗
PubMed2005

Role of leucine 31 of phospholamban in structural and functional interactions with the Ca2+ pump of cardiac sarcoplasmic reticulum.

The ability of two loss-of-function mutants, L31A and L31C, of phospholamban (PLB) to bind to and inhibit the Ca(2+) pump of cardiac sarcoplasmic reticulum (SERCA2a) was investigated using a molecular cross-linking approach. Leu(31) of PLB, located at the cytoplasmic membrane boundary, is a critical amino acid shown previously to be essential for Ca(2+)-ATPase inhibition. We observed that L31A or L31C mutations of PLB prevented the inhibition of Ca(2+)-ATPase activity and disabled the cross-linking of N27C and N30C of PLB to Lys(328) and Cys(318) of SERCA2a. Although L31C-PLB failed to cross-link to any Cys or Lys residue of wild-type SERCA2a, L31C did cross-link with high efficiency to T317C of SERCA2a with use of the homobifunctional sulfhydryl cross-linking reagent, 1,6-bismaleimidohexane. This places Leu(31) of PLB within 10 angstroms of Thr(317) of SERCA2a in the M4 helix. Thus, contrary to previous suggestions, PLB with loss-of-function mutations at Leu(31) retains the ability to bind to SERCA2a, despite losing inhibitory activity. Cross-linking of L31C-PLB to T317C-SERCA2a occurred only in the absence of Ca(2+) and in the presence of nucleotide and was prevented by thapsigargin and by anti-PLB antibody, demonstrating for a fourth cross-linking pair that PLB interacts near M4 only when the Ca(2+) pump is in the Ca(2+)-free, nucleotide-bound E2 conformation, but not in the E2 state inhibited by thapsigargin. L31I-PLB retained full functional and cross-linking activity, suggesting that a bulky hydrophobic residue at position 31 of PLB is essential for productive interaction with SERCA2a. A model for the three-dimensional structure of the interaction site is proposed.

Adenosine Triphosphatases↗
PubMed2005

Plasmonics-based nanostructures for surface-enhanced Raman scattering bioanalysis.

Surface-enhanced Raman scattering (SERS) spectroscopy is a plasmonics-based spectroscopic technique that combines modern laser spectroscopy with unique optical properties of metallic nanostructures, resulting in strongly increased Raman signals when molecules are adsorbed on or near nanometer-size structures of special metals such as gold, silver, and transition metals. This chapter provides a synopsis of the development and application of SERS-active metallic nanostructures, especially for the analysis of biologically relevant compounds. Some highlights of this chapter include reports of SERS as an immunoassay readout method, SERS gene nanoprobes, near-field scanning optical microscopy SERS probes, SERS as a tool for single-molecule detection, and SERS nanoprobes for cellular studies.

DNA↗
PubMed2004

Normal mode-based fitting of atomic structure into electron density maps: application to sarcoplasmic reticulum Ca-ATPase.

A method for the flexible docking of high-resolution atomic structures into lower resolution densities derived from electron microscopy is presented. The atomic structure is deformed by an iterative process using combinations of normal modes to obtain the best fit of the electron microscopical density. The quality of the computed structures has been evaluated by several techniques borrowed from crystallography. Two atomic structures of the SERCA1 Ca-ATPase corresponding to different conformations were used as a starting point to fit the electron density corresponding to a different conformation. The fitted models have been compared to published models obtained by rigid domain docking, and their relation to the known crystallographic structures are explored by normal mode analysis. We find that only a few number of modes contribute significantly to the transition. The associated motions involve almost exclusively rotation and translation of the cytoplasmic domains as well as displacement of cytoplasmic loops. We suggest that the movements of the cytoplasmic domains are driven by the conformational change that occurs between nonphosphorylated and phosphorylated intermediate, the latter being mimicked by the presence of vanadate at the phosphorylation site in the electron microscopy structure.

Calcium-Transporting ATPases↗
PubMed2004

Application of a miniature biochip using the molecular beacon probe in breast cancer gene BRCA1 detection.

We report for the first time the application of a biochip using the molecular beacon (MB) detection scheme. The usability of this biochip novel detection system for the analysis of the breast cancer gene BRCA1 is demonstrated using molecular beacon probes. The MB is designed for the BRCA1 gene and a miniature biochip system is used for detection. The performance of the biochip-MB detection system is evaluated. The optimum conditions for the MB system for highest fluorescence detection sensitivity are investigated for the detection system. The detection of BRCA1 gene is successfully demonstrated in solution and the limit of detection (LOD) is estimated as 70 nM.

Biosensing Techniques↗
PubMed2004

Surface-enhanced-Raman-scattering-inducing nanoprobe for spectrochemical analysis.

This paper describes a new nanoprobe that induces the surface-enhanced Raman scattering (SERS) effect when brought into contact with chemicals on any type of surface. The SERS-inducing probe was fabricated from an optical fiber that was tapered to a tip 100 nm in diameter. A thin layer of silver islands was applied to the tip of the tapered fiber via thermal evaporation to induce the SERS effect. The small scale of the tip may be amenable to localized, nondestructive SERS-based analyses of surfaces with high spatial selectivity. Because the contact probe itself induces the SERS effect, no modification of the sample is required. Direct analysis at submicrometer spatial selectivity is therefore possible for analyte compounds on any type of surface. Various optimization studies and preliminary evaluations were performed. A 10-nm silver thickness was determined to yield the optimum SERS effect. A 25% relative standard deviation in SERS signal was observed for five different probe tips. As a demonstration of the SERS-inducing capability of the probe, Raman spectra were recorded for glass surfaces coated with brilliant cresyl blue and p-aminobenzoic acid before and during contact with the SERS-inducing nanoprobe.

4-Aminobenzoic Acid↗
PubMed2003

Effect of orthophosphate, nucleotide analogues, ADP, and phosphorylation on the cytoplasmic domains of Ca(2+)-ATPase from scallop sarcoplasmic reticulum.

The effects of orthophosphate, nucleotide analogues, ADP, and covalent phosphorylation on the tryptic fragmentation patterns of the E1 and E2 forms of scallop Ca-ATPase were examined. Sites preferentially cleaved by trypsin in the E1 form of the Ca-ATPase were detected in the nucleotide (N) and phosphorylation (P) domains, as well as the actuator (A) domain. These sites were occluded in the E2 (Ca(2+)-free) form of the enzyme, consistent with mutual protection of the A, N, and P domains through their association into a clustered structure. Similar protection of cytoplasmic Ca(2+)-dependent tryptic cleavage sites was observed when the catalytic binding site for substrate on the E1 form of scallop Ca-ATPase was occupied by Pi, AMP-PNP, AMP-PCP, or ADP despite the presence of saturating levels of Ca2+. These results suggest that occupation of the catalytic site on E1 can induce condensation of the cytoplasmic domains to yield a unique structural intermediate that may be related to the form of the enzyme in which the active site is prepared for phosphoryl transfer. The effect of Pi on the E2 form of the scallop Ca-ATPase was also investigated, when it was found that formation of E2-P led to extreme resistance toward secondary cleavage by trypsin and stabilization of enzymatic activity for long periods of time.

Adenosine Diphosphate↗
PubMed2003

Untangling desmosomal knots with electron tomography.

Cell adhesion by adherens junctions and desmosomes relies on interactions between cadherin molecules. However, the molecular interfaces that define molecular specificity and that mediate adhesion remain controversial. We used electron tomography of plastic sections from neonatal mouse skin to visualize the organization of desmosomes in situ. The resulting three-dimensional maps reveal individual cadherin molecules forming discrete groups and interacting through their tips. Fitting of an x-ray crystal structure for C-cadherin to these maps is consistent with a flexible intermolecular interface mediated by an exchange of amino-terminal tryptophans. This flexibility suggests a novel mechanism for generating both cis and trans interactions and for propagating these adhesive interactions along the junction.

Animals↗
PubMed2003

Spatial and dynamic interactions between phospholamban and the canine cardiac Ca2+ pump revealed with use of heterobifunctional cross-linking agents.

Heterobifunctional thiol to amine cross-linking agents were used to gain new insights on the dynamics and conformational factors governing the interaction between the cardiac Ca2+ pump (SERCA2a) and phospholamban (PLB). PLB is a small protein inhibitor of SERCA2a that reduces enzyme affinity for Ca2+ and thereby regulates cardiac contractility. We found that the PLB monomer with Asn27 or Asn30 changed to Cys (N27C-PLB or N30C-PLB) cross-linked to lysine of SERCA2a within seconds with > or =80% efficiency. Optimal cross-linking occurred at spacer chain lengths of 10 and 15 A for N27C and N30C, respectively. The rapid time course of cross-linking indicated that neither dissociation of PLB pentamers nor binding of PLB monomers to SERCA2a was rate-limiting. Cross-linking occurred only to the E2 (Ca2+-free) conformation of SERCA2a, was strongly favored by nucleotide binding to this state, and was completely inhibited by thapsigargin. Protein sequencing in combination with mutagenesis identified of Lys328 of SERCA2a as the target of cross-linking. A three-dimensional map of interacting residues indicated that the cross-linking distances were entirely compatible with the 10-A distance recently determined between N30C of PLB and Cys318 of SERCA2a. In contrast, Lys3 of PLB did not cross-link to any Lys (or Cys) of SERCA2a, suggesting that previous three-dimensional models that constrain Lys3 near residues 397-400 of thapsigargin-inhibited SERCA2a should be viewed with caution. Furthermore, although earlier models of PLB.SERCA2a are based on thapsigargin-bound SERCA, our results suggest that the nucleotide-bound, E2 conformation is substantially different and represents the key conformational state for interacting with PLB.

Amino Acid Sequence↗
PubMed2003

Structure and function of the calcium pump.

Active transport of cations is achieved by a large family of ATP-dependent ion pumps, known as P-type ATPases. Various members of this family have been targets of structural and functional investigations for over four decades. Recently, atomic structures have been determined for Ca2+-ATPase by X-ray crystallography, which not only reveal the architecture of these molecules but also offer the opportunity to understand the structural mechanisms by which the energy of ATP is coupled to calcium transport across the membrane. This energy coupling is accomplished by large-scale conformational changes. The transmembrane domain undergoes plastic deformations under the influence of calcium binding at the transport site. Cytoplasmic domains undergo dramatic rigid-body movements that deliver substrates to the catalytic site and that establish new domain interfaces. By comparing various structures and correlating functional data, we can now begin to associate the chemical changes constituting the reaction cycle with structural changes in these domains.

Adenosine Triphosphate↗
PubMed2002

A structural model for the catalytic cycle of Ca(2+)-ATPase.

Ca(2+)-ATPase is responsible for active transport of calcium ions across the sarcoplasmic reticulum membrane. This coupling involves an ordered sequence of reversible reactions occurring alternately at the ATP site within the cytoplasmic domains, or at the calcium transport sites within the transmembrane domain. These two sites are separated by a large distance and conformational changes have long been postulated to play an important role in their coordination. To characterize the nature of these conformational changes, we have built atomic models for two reaction intermediates and postulated the mechanisms governing the large structural changes. One model is based on fitting the X-ray crystallographic structure of Ca(2+)-ATPase in the E1 state to a new 6 A structure by cryoelectron microscopy in the E2 state. This fit indicates that calcium binding induces enormous movements of all three cytoplasmic domains as well as significant changes in several transmembrane helices. We found that fluorescein isothiocyanate displaced a decavanadate molecule normally located at the intersection of the three cytoplasmic domains, but did not affect their juxtaposition; this result indicates that our model likely reflects a native E2 conformation and not an artifact of decavanadate binding. To explain the dramatic structural effect of calcium binding, we propose that M4 and M5 transmembrane helices are responsive to calcium binding and directly induce rotation of the phosphorylation domain. Furthermore, we hypothesize that both the nucleotide-binding and beta-sheet domains are highly mobile and driven by Brownian motion to elicit phosphoenzyme formation and calcium transport, respectively. If so, the reaction cycle of Ca(2+)-ATPase would have elements of a Brownian ratchet, where the chemical reactions of ATP hydrolysis are used to direct the random thermal oscillations of an innately flexible molecule.

Adenosine Triphosphate↗
PubMedDate not supplied

Screening for the breast cancer gene (BRCA1) using a biochip system and molecular beacon probes immobilized on solid surfaces.

We describe the use of a biochip based on complementary metal oxide semiconductor (CMOS) technology for detection of specific genetic sequences using molecular beacons (MB) immobilized on solid surfaces as probes. The applicability of this miniature detection system for screening for the BRCA1 gene is evaluated using MB probes, designed especially for the BRCA1 gene. MB probes are immobilized on a zeta-probe membrane by biotin-streptavidin immobilization. Two immobilization strategies are investigated to obtain optimal assay sensitivity. The MB is immobilized by manual spotting on zeta-probe membrane surfaces with the use of a custom-made stamping system. The detection of the BRCA1 gene using an MB probe is successfully demonstrated and expands the use of the CMOS biochip for medical applications.

Adsorption↗