Biomedical subjects

David L Windt

Publications and source records attributed to David L Windt.

5 recordsLinked to original sources

PubMed2006

SiC/Tb and Si/Tb multilayer coatings for extreme ultraviolet solar imaging.

Narrowband SiC/Tb and Si/Tb multilayers are fabricated with as much as a 23% normal-incidence reflectance near a 60 nm wavelength and spectral bandpass (FWHM) values of 9.4 and 6.5 nm, respectively. The structural properties of the films are investigated using extreme ultraviolet and x-ray reflectometry and transmission electron microscopy. Thermal stability is investigated in films annealed to as high as 300 degrees C. Because of their superior thermal stability, relatively high reflectance, and narrower spectral bandpass, Si/Tb multilayers are identified as optimal candidates for solar physics imaging applications, where the peak response can be tuned to important emission lines such as O v near 63.0 nm and Mg x near 61.0 nm. We describe our experimental procedures and results, discuss the implications of our findings, and outline prospects for improved performance.

Journal Article↗

PubMed2005

Terbium-based extreme ultraviolet multilayers.

We have fabricated periodic multilayers that comprise either Si/Tb or SiC/Tb bilayers, designed to operate as narrowband reflective coatings near 60 nm wavelength in the extreme ultraviolet (EUV). We find peak reflectance values in excess of 20% near normal incidence. The spectral bandpass of the best Si/Tb multilayer was measured to be 6.5 nm full width at half-maximum (FWHM), while SiC/Tb multilayers have a more broad response, of order 9.4 nm FWHM. Transmission electron microscopy analysis of Si/Tb multilayers reveals polycrystalline Tb layers, amorphous Si layers, and relatively large asymmetric amorphous interlayers. Thermal annealing experiments indicate excellent stability to 100 degrees C (1 h) for Si/Tb. These new multilayer coatings have the potential for use in normal incidence instrumentation in a region of the EUV where efficient narrowband multilayers have not been available until now. In particular, reflective Si/Tb multilayers can be used for solar physics applications where the coatings can be tuned to important emission lines such as O V near 63.0 nm and Mg X near 61.0 nm.

Journal Article↗

PubMed2004

Experimental comparison of extreme-ultraviolet multilayers for solar physics.

We compare the reflectance and stability of multilayers comprising either Si/Mo, Si/Mo2C, Si/B4C, Si/C, or Si/SiC bilayers, designed for use as extreme-ultraviolet (EUV) reflective coatings. The films were deposited by using magnetron sputtering and characterized by both x-ray and EUV reflectometry. We find that the new Si/SiC multilayer offers the greatest spectral selectivity at the longer wavelengths, as well as the greatest thermal stability. We also describe the optimization of multilayers designed for the Solar-B EIS instrument. Finally, we compare experimental reflectance data with calculations and conclude that currently available optical constants cannot be used to adequately model the performance of many of these multilayers.

Journal Article↗

PubMed2004

Normal-incidence efficiencies of multilayer-coated laminar gratings for the extreme-ultraviolet imaging spectrometer on the solar-B mission.

The normal-incidence efficiencies of two laminar gratings and the reflectances of two parabolic mirrors with matching multilayer coatings were measured by monochromatic synchrotron radiation and were compared with modeling calculations. These optics were developed for the Extreme-Ultraviolet Imaging Spectrometer to be launched on the Japanese Solar-B mission. Each optic has two sectors coated with Mo/Si multilayers that reflect the 17-21-nm and 25-29-nm wave bands at normal incidence. The measured peak grating efficiencies are in the 8%-12% range and are in good agreement with efficiency calculations that account for the effects of groove profile and the microroughness as determined by atomic force microscopy.

Journal Article↗

PubMed2003

W/SiC x-ray multilayers optimized for use above 100 keV.

We have developed a new depth-graded multilayer system comprising W and SiC layers, suitable for use as hard x-ray reflective coatings operating in the energy range 100-200 keV. Grazing-incidence x-ray reflectance at E = 8 keV was used to characterize the interface widths, as well as the temporal and thermal stability in both periodic and depth-graded W/SiC structures, whereas synchrotron radiation was used to measure the hard x-ray reflectance of a depth-graded multilayer designed specifically for use in the range E approximately 150-170 keV. We have modeled the hard x-ray reflectance using newly derived optical constants, which we determined from reflectance versus incidence angle measurements also made using synchrotron radiation, in the range E = 120-180 keV. We describe our experimental investigation in detail compare the new W/SiC multilayers with both W/Si and W/B4C films that have been studied previously, and discuss the significance of these results with regard to the eventual development of a hard x-ray nuclear line telescope.

Journal Article↗