PubMed Health⌕ Search

Biomedical subjects

David M Warshaw

Publications and source records attributed to David M Warshaw.

17 recordsLinked to original sources
PubMed2006

Mutation of a conserved glycine in the SH1-SH2 helix affects the load-dependent kinetics of myosin.

The ATP hydrolysis rate and shortening velocity of muscle are load-dependent. At the molecular level, myosin generates force and motion by coupling ATP hydrolysis to lever arm rotation. When a laser trap was used to apply load to single heads of expressed smooth muscle myosin (S1), the ADP release kinetics accelerated with an assistive load and slowed with a resistive load; however, ATP binding was mostly unaffected. To investigate how load is communicated within the motor, a glycine located at the putative fulcrum of the lever arm was mutated to valine (G709V). In the absence of load, stopped-flow and laser trap studies showed that the mutation significantly slowed the rates of ADP release and ATP binding, accounting for the approximately 270-fold decrease in actin sliding velocity. The load dependence of the mutant's ADP release rate was the same as that of wild-type S1 (WT) despite the slower rate. In contrast, load accelerated ATP binding by approximately 20-fold, irrespective of loading direction. Imparting mechanical energy to the mutant motor partially reversed the slowed ATP binding by overcoming the elevated activation energy barrier. These results imply that conformational changes near the conserved G709 are critical for the transmission of mechanochemical information between myosin's active site and lever arm.

Actins↗
PubMed2005

Single-myosin crossbridge interactions with actin filaments regulated by troponin-tropomyosin.

Striated muscle contraction is governed by the thin filament regulatory proteins troponin and tropomyosin. Here, we investigate the molecular mechanisms by which troponin-tropomyosin inhibits myosin's interactions with the thin filament in the absence of calcium by using a laser trap. The displacement events for a single-myosin molecule interacting with a reconstituted thin filament were shorter (step size = 5 nm) and prolonged (69 ms) compared with actin alone (11 nm and 26 ms, respectively). However, these changes alone do not account for the degree of inhibition of thin filament movement observed in an ensemble assay. Our investigations of single- and multiple-myosin molecules with regulated thin filaments suggest the primary basis for this inhibition derives from an approximately 100-fold decrease in the probability of myosin attaching to actin. At higher myosin concentrations, short bursts of motility are observed in a laser trap consistent with the strong binding of a single-myosin crossbridge, resulting in cooperative binding of other cycling crossbridges. We confirmed this cooperativity in the in vitro motility assay by observing thin filament translocation in the absence of calcium but at low [ATP], consistent with rigor activation. We have developed a simple mechanistic model that reproduces and provides insight into both the observed single-myosin molecule and ensemble data in the absence of Ca(2+). These data support the hypothesis that thin filament inhibition in the absence of Ca(2+) is largely achieved by modulating the rate of attachment and/or transition from the weakly to strongly bound state.

Actins↗
PubMed2005

Slip sliding away: load-dependence of velocity generated by skeletal muscle myosin molecules in the laser trap.

Skeletal muscle's ability to shorten and lengthen against a load is a fundamental property, presumably reflecting the inherent load-dependence of the myosin molecular motor. Here we report the velocity of a single actin filament translocated by a mini-ensemble of skeletal myosin approximately 8 heads under constant loads up to 15 pN in a laser trap assay. Actin filament velocity decreased with increasing load hyberbolically, with unloaded velocity and stall force differing by a factor of 2 with [ATP] (30 vs. 100 muM). Analysis of actin filament movement revealed that forward motion was punctuated with rapid backward 60-nm slips, with the slip frequency increasing with resistive load. At stall force, myosin-generated forward movement was balanced by backward slips, whereas at loads greater than stall, myosin could no longer sustain forward motion, resulting in negative velocities as in eccentric contractions of whole muscle. Thus, the force-velocity relationship of muscle reflects both the inherent load-dependence of the actomyosin interaction and the balance between forward and reverse motion observed at the molecular level.

Actin Cytoskeleton↗
PubMed2005

Differential labeling of myosin V heads with quantum dots allows direct visualization of hand-over-hand processivity.

The double-headed myosin V molecular motor carries intracellular cargo processively along actin tracks in a hand-over-hand manner. To test this hypothesis at the molecular level, we observed single myosin V molecules that were differentially labeled with quantum dots having different emission spectra so that the position of each head could be identified with approximately 6-nm resolution in a total internal reflectance microscope. With this approach, the individual heads of a single myosin V molecule were observed taking 72-nm steps as they alternated positions on the actin filament during processive movement. In addition, the heads were separated by 36 nm during pauses in motion, suggesting attachment to actin along its helical repeat. The 36-nm interhead spacing, the 72-nm step size, and the observation that heads alternate between leading and trailing positions on actin are obvious predictions of the hand-over-hand model, thus confirming myosin V's mode of walking along an actin filament.

Actins↗
PubMed2004

Molecular and phenotypic effects of heterozygous, homozygous, and compound heterozygote myosin heavy-chain mutations.

Autosomal dominant familial hypertrophic cardiomyopathy (FHC) has variable penetrance and phenotype. Heterozygous mutations in MYH7 encoding beta-myosin heavy chain are the most common causes of FHC, and we proposed that "enhanced" mutant actin-myosin function is the causative molecular abnormality. We have studied individuals from families in which members have two, one, or no mutant MYH7 alleles to examine for dose effects. In one family, a member homozygous for Lys207Gln had cardiomyopathy complicated by left ventricular dilatation, systolic impairment, atrial fibrillation, and defibrillator interventions. Only one of five heterozygous relatives had FHC. Leu908Val and Asp906Gly mutations were detected in a second family in which penetrance for Leu908Val heterozygotes was 46% (21/46) and 25% (3/12) for Asp906Gly. Despite the low penetrance, hypertrophy was severe in several heterozygotes. Two individuals with both mutations developed severe FHC. The velocities of actin translocation (V(actin)) by mutant and wild-type (WT) myosins were compared in the in vitro motility assay. Compared with WT/WT, V(actin) was 34% faster for WT/D906G and 21% for WT/L908V. Surprisingly V(actin) for Leu908Val/Asp906Gly and Lys207Gln/Lys207Gln mutants were similar to WT. The apparent enhancement of mechanical performance with mutant/WT myosin was not observed for mutant/mutant myosin. This suggests that V(actin) may be a poor predictor of disease penetrance or severity and that power production may be more appropriate, or that the limited availability of double mutant patients prohibits any definitive conclusions. Finally, severe FHC in heterozygous individuals can occur despite very low penetrance, suggesting these mutations alone are insufficient to cause FHC and that uncharacterized modifying mechanisms exert powerful influences.

Actins↗
PubMed2004

A point mutation in the regulatory light chain reduces the step size of skeletal muscle myosin.

Current evidence favors the theory that, when the globular motor domain of myosin attaches to actin, the light chain binding domain or "lever arm" rotates, and thereby generates movement of actin filaments. Myosin is uniquely designed for such a role in that a long alpha-helix (approximately 9 nm) extending from the C terminus of the catalytic core is stabilized by two calmodulin-like molecules, the regulatory light chain (RLC) and the essential light chain (ELC). Here, we introduce a single-point mutation into the skeletal myosin RLC, which results in a large (approximately 50%) reduction in actin filament velocity (V(actin)) without any loss in actin-activated MgATPase activity. Single-molecule analysis of myosin by optical trapping showed a comparable 2-fold reduction in unitary displacement or step size (d), without a significant change in the duration of the strongly attached state (tau(on)) after the power stroke. Assuming that V(actin) approximately d/tau(on), we can account for the change in velocity primarily by a change in the step size of the lever arm without incurring any change in the kinetic properties of the mutant myosin. These results suggest that a principal role for the many light chain isoforms in the myosin II class may be to modulate the flexural rigidity of the light chain binding domain to maximize tension development and movement during muscle contraction.

Amino Acid Sequence↗
PubMed2004

Myosin V processivity: multiple kinetic pathways for head-to-head coordination.

Myosin V, a double-headed molecular motor, transports organelles within cells by walking processively along actin, a process that requires coordination between the heads. To understand the mechanism underlying this coordination, processive runs of single myosin V molecules were perturbed by varying nucleotide content. Contrary to current views, our results show that the two heads of a myosin V molecule communicate, not through any one mechanism but through an elaborate system of cooperative mechanisms involving multiple kinetic pathways. These mechanisms introduce redundancy and safeguards that ensure robust processivity under differing physiologic demands.

Adenosine Diphosphate↗
PubMed2004

Does the myosin V neck region act as a lever?

Recent research efforts from several groups have addressed the question of whether the amplitude of myosin's unitary step size is proportional to the length of the neck region. Unconventional myosin V, which has an extended neck region with 6IQ motifs, provides a natural template by which to test the lever arm model via mutational analysis. The most stringent test requires that a series of single-headed molecules from the same myosin class be analyzed. Here we characterized the unitary mechanics of three single-headed fragments of myosin V expressed in the baculovirus/insect cell system. Each construct consisted of the motor domain (MD) and a variable number of IQ motifs (MD2IQ, MD4IQ and MD6IQ) that bind calmodulin, followed by an epitope tag so that the molecule can be attached to the nitrocellulose surface via an antibody. The results show a correlation between the unitary step size and the number of IQ motifs, confirming that the myosin neck region acts as a lever. The step size of MD2IQ is twice that observed from single-headed subfragments of class II myosins with the same neck length. Our results are discussed in relation to data obtained concurrently from other laboratories with similar constructs.

Actins↗
PubMed2003

A mutant heterodimeric myosin with one inactive head generates maximal displacement.

Each of the heads of the motor protein myosin II is capable of supporting motion. A previous report showed that double-headed myosin generates twice the displacement of single-headed myosin (Tyska, M.J., D.E. Dupuis, W.H. Guilford, J.B. Patlak, G.S. Waller, K.M. Trybus, D.M. Warshaw, and S. Lowey. 1999. Proc. Natl. Acad. Sci. USA. 96:4402-4407). To determine the role of the second head, we expressed a smooth muscle heterodimeric heavy meromyosin (HMM) with one wild-type head, and the other locked in a weak actin-binding state by introducing a point mutation in switch II (E470A). Homodimeric E470A HMM did not support in vitro motility, and only slowly hydrolyzed MgATP. Optical trap measurements revealed that the heterodimer generated unitary displacements of 10.4 nm, strikingly similar to wild-type HMM (10.2 nm) and approximately twice that of single-headed subfragment-1 (4.4 nm). These data show that a double-headed molecule can achieve a working stroke of approximately 10 nm with only one active head and an inactive weak-binding partner. We propose that the second head optimizes the orientation and/or stabilizes the structure of the motion-generating head, thereby resulting in maximum displacement.

Actins↗
PubMed2003

The unique properties of tonic smooth muscle emerge from intrinsic as well as intermolecular behaviors of Myosin molecules.

To better understand the molecular basis for some of the unique mechanical properties of tonic smooth muscle, we use a laser trap to assay the mechanochemistry of single smooth muscle heavy meromyosin molecules lacking a seven-amino acid insert in the nucleotide binding loop (minus insert). We measured a second-order ATP-induced actin dissociation rate, kT, of 2.2 x 10(6) m(-1) s(-1), an ADP release rate, k-D, of 19 s(-1), a second-order ADP binding rate, kD, of 60 x 10(5) m(-1) s(-1), and an ADP affinity, KD, of 3.2 microm, which is more than 100-fold greater than that measured for skeletal muscle myosin. By performing in vitro motility studies under nearly identical conditions, we show that the relatively slow actin velocity generated by minus-insert heavy meromyosin is significantly influenced, but not limited, by k-D. Our results support a model in which two separate intermediate steps in the actin-myosin catalyzed ATP hydrolysis reaction are energetically coupled through mechanical interactions, and we discuss this model in the context of the ability of tonic muscle to maintain high forces at low energetic cost (latch).

Actins↗
PubMed2003

Analysis of myosin heavy chain functionality in the heart.

Comparison of mammalian cardiac alpha- and beta-myosin heavy chain isoforms reveals 93% identity. To date, genetic methodologies have effected only minor switches in the mammalian cardiac myosin isoforms. Using cardiac-specific transgenesis, we have now obtained major myosin isoform shifts and/or replacements. Clusters of non-identical amino acids are found in functionally important regions, i.e. the surface loops 1 and 2, suggesting that these structures may regulate isoform-specific characteristics. Loop 1 alters filament sliding velocity, whereas Loop 2 modulates actin-activated ATPase rate in Dictyostelium myosin, but this remains untested in mammalian cardiac myosins. Alpha --> beta isoform switches were engineered into mouse hearts via transgenesis. To assess the structural basis of isoform diversity, chimeric myosins in which the sequences of either Loop 1+Loop 2 or Loop 2 of alpha-myosin were exchanged for those of beta-myosin were expressed in vivo. 2-fold differences in filament sliding velocity and ATPase activity were found between the two isoforms. Filament sliding velocity of the Loop 1+Loop 2 chimera and the ATPase activities of both loop chimeras were not significantly different compared with alpha-myosin. In mouse cardiac isoforms, myosin functionality does not depend on Loop 1 or Loop 2 sequences and must lie partially in other non-homologous residues.

Amino Acid Sequence↗
PubMed2002

The converter domain modulates kinetic properties of Drosophila myosin.

Recently the converter domain, an integral part of the "mechanical element" common to all molecular motors, was proposed to modulate the kinetic properties of Drosophila chimeric myosin isoforms. Here we investigated the molecular basis of actin filament velocity (V(actin)) changes previously observed with the chimeric EMB-IC and IFI-EC myosin proteins [the embryonic body wall muscle (EMB) and indirect flight muscle isoforms (IFI) with genetic substitution of the IFI and EMB converter domains, respectively]. In the laser trap assay the IFI and IFI-EC myosins generate the same unitary step displacement (IFI = 7.3 +/- 1.0 nm, IFI-EC = 5.8 +/- 0.9 nm; means +/- SE). Thus converter-mediated differences in the kinetics of strong actin-myosin binding, rather than the mechanical capabilities of the protein, must account for the observed V(actin) values. Basal and actin-activated ATPase assays and skinned fiber mechanical experiments definitively support a role for the converter domain in modulating the kinetic properties of the myosin protein. We propose that the converter domain kinetically couples the P(i) and ADP release steps that occur during the cross-bridge cycle.

Adenosine Triphosphatases↗
PubMed2002

The myosin power stroke.

Optical trapping technology now allows investigators in the motility field to measure the forces generated by single motor molecules. A handful of research groups have exploited this approach to further develop our understanding of the actin-based motor, myosin, an ATPase that is capable of converting chemical energy into mechanical work during a cyclical interaction with filamentous actin. In this regard, myosin-II from muscle is the most well-characterized myosin superfamily member. By combining the data obtained from optical trap assays with that from ensemble biochemical and mechanical assays, this review discusses the fundamental properties of the myosin-II power stroke and, perhaps more significantly, how these properties are governed by this molecule's atomic structure and the biochemical transitions that define its catalytic cycle.

Animals↗
PubMed2002

The biochemical kinetics underlying actin movement generated by one and many skeletal muscle myosin molecules.

To better understand how skeletal muscle myosin molecules move actin filaments, we determine the motion-generating biochemistry of a single myosin molecule and study how it scales with the motion-generating biochemistry of an ensemble of myosin molecules. First, by measuring the effects of various ligands (ATP, ADP, and P(i)) on event lifetimes, tau(on), in a laser trap, we determine the biochemical kinetics underlying the stepwise movement of an actin filament generated by a single myosin molecule. Next, by measuring the effects of these same ligands on actin velocities, V, in an in vitro motility assay, we determine the biochemistry underlying the continuous movement of an actin filament generated by an ensemble of myosin molecules. The observed effects of P(i) on single molecule mechanochemistry indicate that motion generation by a single myosin molecule is closely associated with actin-induced P(i) dissociation. We obtain additional evidence for this relationship by measuring changes in single molecule mechanochemistry caused by a smooth muscle HMM mutation that results in a reduced P(i)-release rate. In contrast, we observe that motion generation by an ensemble of myosin molecules is limited by ATP-induced actin dissociation (i.e., V varies as 1/tau(on)) at low [ATP], but deviates from this relationship at high [ATP]. The single-molecule data uniquely provide a direct measure of the fundamental mechanochemistry of the actomyosin ATPase reaction under a minimal load and serve as a clear basis for a model of ensemble motility in which actin-attached myosin molecules impose a load.

Actomyosin↗
PubMed2002

Molecular mechanics of mouse cardiac myosin isoforms.

Two myosin isoforms are expressed in myocardium, alphaalpha-homodimers (V(1)) and betabeta-homodimers (V(3)). V(1) exhibits higher velocities and myofibrillar ATPase activities compared with V(3). We also observed this for cardiac myosin from normal (V(1)) and propylthiouracil-treated (V(3)) mice. Actin velocity in a motility assay (V(actin)) over V(1) myosin was twice that of V(3) as was the myofibrillar ATPase. Myosin's average force (F(avg)) was similar for V(1) and V(3). Comparing V(actin) and F(avg) across species for both V(1) and V(3), our laboratory showed previously (VanBuren P, Harris DE, Alpert NR, and Warshaw DM. Circ Res 77: 439-444, 1995) that mouse V(1) has greater V(actin) and F(avg) compared with rabbit V(1). Mouse V(3) V(actin) was twice that of rabbit V(actin). To understand myosin's molecular structure and function, we compared alpha- and beta-cardiac myosin sequences from rodents and rabbits. The rabbit alpha- and beta-cardiac myosin differed by eight and four amino acids, respectively, compared with rodents. These residues are localized to both the motor domain and the rod. These differences in sequence and mechanical performance may be an evolutionary attempt to match a myosin's mechanical behavior to the heart's power requirements.

Actins↗