Biomedical subjects

David S W Lim

Publications and source records attributed to David S W Lim.

4 recordsLinked to original sources

PubMed2004

Fast initiation of chemical reactions with laser-induced breakdown of a nanoscale partition.

This letter describes a new strategy for initiating a chemical reaction that is based on the laser-induced breakdown of a nanoscopic barrier, which physically separates the reactants in space. Because the breakdown of the barrier is fast ( approximately 0.3 micros) and owing to the nanometer dimension of the barrier, the reactants can be brought together and the reaction can be initiated rapidly. The time scale most suited for this method (from microseconds to tens of milliseconds) bridges nicely between the faster time scales that are accessible mostly with laser-based triggering experiments and the slower time scales that are studied most frequently with flow-based devices.

Kinetics↗

PubMed2004

Parametric investigation on the effect of channel topologies on electrophoretic separations.

This paper presents a systematic study that illustrates the importance of the topologies of microchannels on electrokinetically based separation. Using theoretical and numerical analyses, we designed and showed that topologies that significantly increased the surface-to-volume ratio of the channel can provide dramatic improvement in the ability of the channel both to dissipate the heat generated by Joule heating and to reduce the axial dispersion associated with the siphoning effect. The incremental benefit and tradeoff of geometric complexity was also evaluated. The improvement offered by topographically patterned channels, such as finned structures, is especially pertinent in the development of preparative or semi-preparative scale electrokinetically driven separations, such as capillary electrophoresis and capillary electrochromatography, in which large cross sections of channels are required to achieve the needed volumetric throughput.

Electrophoresis↗

PubMed2003

Microfluidic systems: high radial acceleration in microvortices.

Microfluidic systems can conveniently be used for rapid analysis of biological samples. Here we describe a single re-circulating flow, or microvortex, that can generate a maximum fluid rotational velocity of up to 12 m s(-1) and a corresponding radial acceleration in excess of 10(6)g. Such microvortices may be exploited in centrifugal microdevices to investigate the effects of high radial acceleration on biological and chemical processes.

Journal Article↗

PubMed2003

Fabrication of thermoset polyester microfluidic devices and embossing masters using rapid prototyped polydimethylsiloxane molds.

Plastics are increasingly being used for the fabrication of Lab-on-a-Chip devices due to the variety of beneficial material properties, affordable cost, and straightforward fabrication methods available from a range of different types of plastics. Rapid prototyping of polydimethylsiloxane (PDMS) devices has become a well-known process for the quick and easy fabrication of microfluidic devices in the research laboratory; however, PDMS is not always an appropriate material for every application. This paper describes the fabrication of thermoset polyester microfluidic devices and masters for hot embossing using replica molding techniques. Rapid prototyped PDMS molds are convienently used for the production of non-PDMS polymeric devices. The recessed features in the cast polyester can be bonded to a second polyester piece to form an enclosed microchannel. Thermoset polyester can withstand moderate amounts of pressure and elevated temperature; therefore, the cast polyester piece also can be used as a master for embossing polymethylmethacrylate (PMMA) microfluidic systems. Examples of enclosed polyester and PMMA microchannels are presented, and we discuss the electroosmotic properties of both types of channels, which are important for analytical applications such as capillary electrophoresis.

Chemical Phenomena↗