PubMed Health⌕ Search

Biomedical subjects

David Sémeril

Publications and source records attributed to David Sémeril.

8 recordsLinked to original sources

Structure-reactivity relationships in SHOP-type complexes: tunable catalysts for the oligomerisation and polymerisation of ethylene.

For over 30 years complexes with the general formula [NiPh(P,O)L] (L = tertiary phosphine; P,O = chelating phosphanylenolato ligand) have been used as highly efficient oligomerisation catalysts suitable for the production of linear alpha-olefins. The same complexes, which are usually referred to as SHOP-type catalysts (SHOP = Shell Higher Olefin Process) can also be used as ethylene polymerisation catalysts, provided they are treated with a phosphine scavenger that selectively removes the tertiary phosphine ligand (L). This Perspective examines the impact of various parameters (influence of the substituents, backbone size, solvent, use of co-catalysts, etc.) on the catalytic outcome of the complexes. Overall, this review shows that the selectivity and activity of the catalyst may be tuned efficiently through directed modification of the P,O chelator.

Journal Article↗

Ethylene oligomerisation and polymerisation with nickel phosphanylenolates bearing electron-withdrawing substituents: Structure-reactivity relationships.

Three SHOP-type catalysts, in which the C=C(O) double bond was substituted by electron-withdrawing substituents, [Ni{Ph2PC(R1)=C(R2)O}Ph(PPh3)] (2: R1,R2 = -C(Me)=NN(Ph)-; 3: R1 = CO2Et, R2 = Ph; 4: R1 = CO2Et, R2 = CF3), were assessed as ethylene-oligomerisation and -polymerisation catalysts and compared to Keim's complex, [Ni{Ph2PCH=C(Ph)O}Ph(PPh3)] (1). A rationale for the influence of the double-bond substituents of the P,O-chelate unit on the catalytic properties is proposed, on the basis of X-ray diffraction studies, spectroscopic data and DFT-B3 LYP calculations. Whatever their relative electron-withdrawing strength, the R1 and R2 substituents induce an increase in activity with respect to catalyst 1. For those systems in which the basicity of the oxygen atom is decreased relative to that of the phosphorus atom, the chain-propagation rate increases with respect to that for catalyst 1. Reduction of the basicity of the P relative to that of the O, however, induces higher chain-termination rates.

Journal Article↗

Catalytic applications of keto-stabilised phosphorus ylides based on a macrocyclic scaffold: calixarenes with one or two pendant Ni(P,O)-subunits as ethylene oligomerisation and polymerisation catalysts.

Four calix[4]arenes containing either one or two ylidic -C(O)CH=PPh3 moieties anchored at p-phenolic carbon atoms were prepared starting from cone-25,27-dipropoxycalix[4]arene (1): 1,3-alternate-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (12), 1,3-alternate-5-(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (13), cone-5-(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (14), cone-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (15). All the ylides were shown to be suitable for the preparation of SHOP-type complexes, i.e. of molecules containing [NiPh{Ph2PCH=C(O)R}(PPh3)] subunits (R = calixarene fragment). The monometallic complexes, namely those obtained from the monophosphorus ylides 13 and 14, proved to be efficient ethylene oligomerisation or polymerisation catalysts. At 80 degrees C, they displayed significantly better activities than the prototype [NiPh{Ph(2)PCH=C(O)Ph}(PPh3)], hence reflecting the beneficial role of the bulky calixarene substituent. The systems derived from the two ylides 12 and 15, both containing two convergent ylidic moieties, resulted in lower activities, the proximity of the two catalytic centres facilitating an intramolecular deactivation pathway during the period of catalyst activation. For the first time, the solid-state structure of a complex containing two "NiPh(P,O)(PPh3)" units as well as that of a SHOP-type complex having two linked phosphorus units were determined.

Journal Article↗

Diphosphines with expandable bite angles: highly active ethylene dimerisation catalysts based on upper rim, distally diphosphinated calix[4]arenes.

The binding properties of two large diphosphines, cone-5,17-dibromo-11,23-bis(diphenylphosphino)-25,26,27,28-tetrapropoxycalix[4]arene (1) and cone-5,17-bis(diphenylphosphino)-25,26,27,28-tetrapropoxycalix[4]arene (2) toward Ni(II) centres have been investigated. Whatever the starting complex, NiBr2 or [NiCp]BF4, quantitative formation of a chelate complex was observed, illustrating the preorganisation of the ligands. An X-ray structure determination was carried out for [NiCp1]BF4 which revealed that the nickel atom is positioned to one side of the calixarene axis, the PNiP plane being roughly parallel to the calixarene reference plane. The molecule has C(1) symmetry in the solid state, a feature which is also observed in solution at low temperature. As shown by variable-temperature 1H and 31P NMR studies, the complex undergoes two distinct motions: 1) a fan-like swinging of the coordination plane which displaces the metal from one side of the calixarene axis to the other, a motion during which the PNiP angle is likely to undergo a significant enlargement; 2) a rapid oscillation of each PPh2 unit about the corresponding Ni--P bond. In the latter dynamics the two endo-oriented PPh rings alternately occupy the calixarene entry. The two flexible ligands were assessed in ethylene oligomerisation. Activation with methylaluminoxane of the paramagnetic complexes [NiBr2.(1 or 2)] afforded highly active ethylene dimerisation catalysts, with turnover frequencies up to 10(6) (mol C2H4) (mol Ni)(-1) h(-1). The selective formation of 1-butene can be rationally controlled by using low catalyst concentrations.

Journal Article↗

Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions.

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.

Journal Article↗

Tandem isomerization/Claisen transformation of allyl homoallyl and diallyl ethers into gamma,delta-unsaturated aldehydes with a new three component catalyst Ru3(CO)12/imidazolinium salt/Cs2CO3.

The three component catalyst Ru3(CO)12/1,3-bis(2,6-diisopropylphenyl)imidazolinium chloride/Cs2CO3 (molar ratio 1:3:6) successively promotes both allyl to vinyl isomerization and Claisen rearrangement from allyl homoallyl and diallyl ethers to selectively afford gamma,delta-unsaturated aldehydes.

Journal Article↗