PubMed Health⌕ Search

Biomedical subjects

De-Liang Long

Publications and source records attributed to De-Liang Long.

At least 19 recordsLinked to original sources

Experimental and theoretical investigations of the sulfite-based polyoxometalate cluster redox series: alpha- and beta-[Mo(18)O(54)(SO(3))(2)](4-/5-/6-).

The synthesis, isolation and structural characterization of the sulfite polyoxomolybdate clusters alpha-(D(3h))(C(20)H(44)N)(4){alpha-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN and beta-(D(3d))(C(20)H(44)N)(4){beta-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN is presented. Voltammetric studies in acetonitrile (0.1 M Hx(4)NClO(4), Hx(4)N=tetra-n-hexylammonium) reveal the presence of an extensive series of six one-electron reduction processes for both isomers. Under conditions of bulk electrolysis, the initial [Mo(18)O(54)(SO(3))(2)](4-/5-) and [Mo(18)O(54)(SO(3))(2)](5-/6-) processes produce stable [Mo(18)O(54)(SO(3))(2)](5-) and [Mo(18)O(54)(SO(3))(2)](6-) species, respectively, and the same reduced species may be produced by photochemical reduction. Spectroelectrochemical data imply that retention of structural form results upon reduction, so that both alpha and beta isomers are available at each of the 4-, 5-, and 6-redox levels. However, the alpha isomer is the thermodynamically favored species in both the one- and two-electron-reduced states, with beta-->alpha isomerization being detected in both cases on long time scales (days). EPR spectra also imply that increasing localization of the unpaired electron occurs over the alpha- and beta-[Mo(18)O(54)(SO(3))(2)](5-) frameworks as the temperature approaches 2 K where the EPR spectra show orthorhombic symmetry with different g and hyperfine values for the alpha and beta isomers. Theoretical studies support the observation that it is easier to reduce the alpha cluster than the beta form and also provide insight into the driving force for beta-->alpha isomerization in the reduced state. Data are compared with that obtained for the well studied alpha-[Mo(18)O(54)(SO(4))(2))](4-) sulfate cluster.

Journal Article↗

Towards polyoxometalate-integrated nanosystems.

Polyoxometalates represent a diverse range of molecular clusters with an almost unmatched range of physical properties and the ability to form structures that can bridge several length scales. The new building block principles that have been discovered are beginning to allow the design of complex clusters with desired properties and structures; several structural types and novel physical properties are examined herein. The overall message that is presented throughout is the possibility that polyoxometalate clusters could be excellent candidates to be exploited in the development of functional nanosystems or nanodevices. The concepts that underpin the development of nanoscale devices are discussed briefly, as are the considerable challenges that must be overcome to realise polyoxometalate-based functional nanosystems.

Journal Article↗

Inorganic crown: the host-guest chemistry of a high nuclearity 'Celtic-ring' isopolyoxotungstate [H12W36O120]12-.

A range of complexes based on the high-nuclearity [W36] isopolyoxotungstate cluster, [H12W36O120]12-, with a triangular topology has been isolated by using the organic cation, protonated triethanolamine. In analogy to an 18-crown-6 crown ether with six oxygen donors on a ring, the cluster can form alkali and alkaline earth metal complexes [M within W36] (M = K+, Rb+, Cs+, NH4+, Sr2+ and Ba2+, 1-6, respectively). Compounds 1-6 were characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy. Comparisons between the structures of 1-6 and 18-crown-6 as well as the symmetry directing influence of the organo-cations in the isolation of the overall cluster architecture are discussed.

Journal Article↗

Controlling aggregation of copper(II)-based coordination compounds: From mononuclear to dinuclear, tetranuclear, and polymeric copper complexes.

The use of a strategy combining ligand design and changes of reaction conditions has been investigated with the goal of directing the assembly of mononuclear, dinuclear, tetranuclear, and polymeric copper(II) complexes. As a result, closely related copper monomers, alkoxo dimers, and hydroxo cubanes, along with a carbonate-bridged polymeric species, have been synthesized using the rigid, aliphatic amino ligands cis-3,5-diamino-trans-hydroxycyclohexane (DAHC), cis-3,5-diamino-trans-methoxycyclohexane (DAMC), and the glutaryl-linked derivative glutaric acid bis-(cis-3,5-diaminocyclohexyl) ester (GADACE). The composition of the monomeric complex has been determined by X-ray crystallography as [Cu(DAHC)2](ClO4)2 (1), the two dimers as [{Cu(DAHC)(OMe)}2](ClO4)2.MeOH (2) and [{Cu(DAMC)(OMe)(ClO4)}2] (3), the three Cu4O4 cubanes as [{Cu(DAHC)(OH)}4](ClO4)(4).2.5MeOH (4), [{Cu(DAMC)(OH)}4](ClO4)4.H2O (5), and [{Cu2(OH)2(GADACE)}2]Cl4.2MeOH.6H2O (6), and an infinite-chain structure as [{Cu(DAHC)(CO3)}n] (7). Furthermore, the cubane structures 4 and 5 have been investigated magnetically. Our studies indicate that formation of the monomeric, dimeric, and tetranuclear DAHC and DAMC complexes can be controlled by small changes in reaction conditions and that further preorganization of the ligand moiety by linking the DAHC cores (GADACE) allows more effective direction of the self-assembly of the Cu4O4 cubane core.

Journal Article↗

Highly stable phenanthridinium frameworks as a new class of tunable DNA binding agents with cytotoxic properties.

A new class of cytotoxic heteroaromatic cations is presented, based on the dihydro-imidazo-phenanthridinium framework (DIP), that have affinity for DNA and cytotoxicity toward cancerous cells. The DIP framework is particularly tunable due to the flexible synthetic methodology. Furthermore, the central moiety has proved to be very stable to hydrolysis and reduction compared to other phenanthridinium-based agents.

Antineoplastic Agents↗

Reactions of a {Mo16}-type polyoxometalate cluster with electrophiles: a synthetic, theoretical and magnetic investigation.

A medium-nuclearity mixed-valence polyoxomolybdate [H2Mo16O52]10-={Mo16}(1a) was synthesized using an approach that employed protonated hexamethylenetetramine (HMTAH+) as counter ion and yielded (HMTAH)10 1a.34 H2O (1). The {Mo16} cluster anion exhibits significant nucleophilicity and traps electrophiles such as divalent transition metal ions, resulting in a family of isostructural compounds based on {Mo16M2}-type anions [M(H2O)8H2Mo16O52]6- (M=FeII (2), MnII (3), CoII (4)). The highly reactive nature of the {Mo16} system is also revealed by rearrangement and decomposition reactions of to either slowly form a sodium-bridged heptamolybdate-based chain compound (5) when left in the reaction solution or, in the presence of very high concentrations of electrophiles, to heptamolybdate-based cluster compounds [M2(H2O)9Mo7O24]2- of the {M2Mo7}-type (M=FeII (6), MnII (7)). Compounds were characterised by single crystal X-ray diffraction, elemental analysis, IR spectroscopy, magnetic susceptibility measurements, and density functional theory calculations.

Journal Article↗

Anion control over interpenetration and framework topology in coordination networks based on homoleptic six-connected scandium nodes.

Reaction of ScX3 (X=NO3-, CF3SO3-, ClO4-) with 4,4'-bipyridine-N,N'-dioxide (L) affords topologically distinct six-connected three-dimensional coordination frameworks, {[Sc(L)3](NO3)3}(infinity) (1), {[Sc(L)3](CF3)SO3)3(CH3OH)2.7(H2O)3}(infinity) (2), {[Sc(L)3](ClO4)3}(infinity) (3) and {[Sc(L)4(H2O)2](ClO4)3}(infinity) (4). Compounds 1, 2 and 3 are networks based on octahedrally co-ordinated ScO6 centres bound through six oxygen atoms from six separate N-oxide ligands L. Compounds 1 and 3 are doubly interpenetrated and have alpha-polonium-type structures of 4(12)6(3) topology based upon three intersecting (4,4) nets. The structure of 2 is unusual and shows parallel, co-planar layers of (4,4) nets connected in a criss-crossed fashion to afford a new 4(8)6(6)8 topology. In 4 only four ligands L bind to each Sc(III) centre with two additional water molecules bridging metal nodes. Significantly, the bridges formed by L do not sit in a plane and if connections through L are considered alone the resultant structure is a diamondoid array typically based upon a tetrahedral connecting node at Sc. Five interpenetrating diamondoid networks are observed that are cross-bridged by water molecules to form a single three-dimensional array of 4(8)6(7) topology. Compound 4 can also be viewed as incorporating two intersecting (4,4) grids based upon two ligands L and two bridging waters. Thus, variation of anion, solvent and conditions critically affects the structures of products formed, and the series of polymers reported herein illustrates how tectons based upon (4,4) grids can be combined and distorted to form non-NaCl topologies and even cross-bridged, multiply interpenetrated diamondoid materials. Both compounds 2 and 4 represent unusual examples of self-penetrated coordination frameworks.

Journal Article↗

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers.

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.

Acetonitriles↗

New approaches to the analysis of high connectivity materials: design frameworks based upon 4(4)- and 6(3)-subnet tectons.

Coordination framework polymers derived from lanthanide metal ions with N,N'-dioxide ligands (4,4'-bipyridine-N,N'-dioxide, pyrazine-N,N'-dioxide, 1,2-bis(pyridin-4-yl)ethane-N,N'-dioxide, trans-1,2-bis(pyridin-4-yl)ethene-N,N'-dioxide) exhibit such intricate architectures that a new strategy is required to appreciate and understand their structures. Rather than analyzing the overall structure in terms of the connectivity of individual metal nodes, which can lead in some cases to extremely complex topological treatments, our new strategy is based on the visualization of the structures as combinations of interconnected layered 2-D sheets or subnet tectons. Despite the diversity and relative complexities of many of the structures discussed here, they can all be described by the interconnection of just two types of 2-D subnet tectons, 4(4) square grids or 6(3) hexagonal grids. The interconnection of these layered sheets with bridging N,N'-dioxide molecules gives rise to both 2-D bilayer and 3-D network extended structures depending upon the relative dispositions of the interconnecting N,N'-dioxide ligands. Thus, 2-D bilayers result when the N,N'-dioxide ligands that bridge two subnet tectons are located on the same side of the sheet, while 3-D networks are formed when the bridging N,N'-dioxide ligands are located on both sides of the sheet. This analysis allows ready identification and interpretation of some of the most highly connected and complex architectures yet observed in materials chemistry.

Journal Article↗

A high-nuclearity "Celtic-ring" isopolyoxotungstate, [H12W36O120]12-, that captures trace potassium ions.

A high-nuclearity {W36} isopolyoxotungstate cluster, [H12W36O120]12-, with a triangular shape has been isolated by using an encapsulating organic cation, protonated triethanolamine. In analogy to an 18-crown-6 crown ether, the cluster captures a potassium ion, present in trace amounts in the reaction system, within its cavity. DFT calculations suggest that the distribution of partial atomic charges over the oxygen framework shows maxima at certain "hotspot" sites, which imply possible routes for further cluster growth based on the {W36} system.

Journal Article↗

General one-pot, three-step methodology leading to an extended class of N-heterocyclic cations: spontaneous nucleophilic addition, cyclization, and hydride loss.

A new class of phenanthridinium derivative has been isolated from the reaction of 2-bromoethyl-phenanthridinium bromide with a range of primary amines in excellent yields. The reaction pathway is unprecedented and proceeds via three cascade steps: nucleophilic attack of a primary amine on the iminium moiety of a heteroaromatic ring system and cyclization to form a five-membered ring, followed by hydride loss to yield a rearomatized dihydro-1H-imidazo[1,2-f]phenanthridinium derivative. A range of NMR phase transfer experiments were carried out to elucidate the mechanistic pathway, and the methodology has been further developed by means of a biphasic system using N-bromosuccinimide as a co-oxidizing agent. The method has also been extended to other N-heterocyclic cation derivatives such as quinolinium and quinazolinium.

Journal Article↗

Coordination networks through the dimensions: from discrete clusters to 1D, 2D, and 3D silver(I) coordination polymers with rigid aliphatic amino ligands.

The use of a ligand directed strategy in the assembly of discrete clusters, 1D chains, 2D layers, and 3D networks using aliphatic N-donor ligands has been investigated. The ligands are a family of amines with rigid backbones [cis,cis-1,3,5-triaminocyclohexane (cis-tach), cis,trans-1,3,5-triaminocyclohexane (trans-tach), cis-1,3-diaminocyclohexane (cis-dach), and cis-3,5-diaminopiperidine (cis-dapi)], and their complexation with Ag(I) salts results in a diverse set of architectures with the following compositions: [Ag3(cis-tach)2]F3.4CH(3)OH.0.5H2O (1), [Ag3(cis-tach)2]F3.6H2O (2), ([Ag(cis-dach)]ClO4)n (3), ([Ag(cis-tach)]NO3)n (4), ([Ag(trans-tach)]PF6)n(5), and ([Ag(cis-dapi)]CF3SO3)n (6). Structural analysis shows that compounds 1 and 2 are discrete M(3)L(2) cage-type clusters with varying solvent molecule content. Short Ag...Ag contacts (3.021(8) A) are observed to dimerize discrete units in compound 2. Compound 3 is a 1D zigzag chain formed by coordination to the two primary amines of cis-dach, whereas the tridentate ligands in compounds 4 and 5 (cis-tach and trans-tach, respectively) are able to form tubular architectures by virtue of their ability to "wrap" round the channel walls. An infinite 2D coordination network is demonstrated by compound 6, in which the three coplanar amino donors of cis-dapi coordinate to the trigonal planar Ag(I) ions to form a layered structure of 6(3) topology. These are compared with a previously reported 3D structure, ([Ag(trans-tach)]NO3)n (7), that belongs to this family of architectures.

Journal Article↗