Multiple stressors--a challenge for the future.
Explore the source record for details and available documents.
Animals↗
Biomedical subjects
Deborah H Oughton
Publications and source records attributed to Deborah H Oughton.
Plutonium contamination in soils and sediments at Mayak PA, Russia.
The Mayak Production Association (Mayak PA) was established in the late 1940's to produce plutonium for the Soviet Nuclear Weapons Programme. In total, seven reactors and two reprocessing plants have been in operation. Today, the area comprises both military and civilian reactors as well as reprocessing and metallurgical plants. Authorized and accidental releases of radioactive waste have caused severe contamination to the surrounding areas. In the present study, [alpha]-spectrometry and inductively coupled plasma-mass spectrometry (ICP-MS) have been used to determine plutonium activities and isotope ratios in soil and sediment samples collected from reservoirs of the Techa River at the Mayak area and downstream Techa River. The objective of the study was to determine the total inventory of plutonium in the reservoirs and to identify the different sources contributing to the plutonium contamination. Results based on [alpha]-spectrometry and ICP-MS measurements show the presence of different sources and confirmed recent reports of civilian reprocessing at Mayak. Determination of activity levels and isotope ratios in soil and sediment samples from the Techa River support the hypothesis that most of the plutonium, like other radionuclides in the Techa River, originated from the very early waste discharges to the Techa River between 1949 and 1951. Analysis of reservoir sediment samples suggest that about 75% of the plutonium isotopes could have been released to Reservoir 10 during the early weapons production operation of the plant, and that the majority of plutonium in Reservoir 10 originates from discharges from power production or reprocessing. Enhanced 240Pu/239Pu atom ratios in river sediment upper layers (0-2 cm) between 50 and 250 km downstream from the plant indicate a contribution from other, non-fallout sources.
Environmental Monitoring↗
Use of AMS in the marine environment.
In recent years, the field of AMS has expanded into many areas of science. This paper reviews a variety of applications of AMS in the marine environment, focusing particularly on recent developments and applications. Following a brief summary of the three main isotope techniques used in environmental studies: dating, tracing and source identification, a number of applications are considered. Traditional (14)C-dating is no longer the dominant application of AMS measurements, and together with measurements of (10)Be, (26)Al and (36)Cl, much of the research is now directed towards an understanding of global climate change via studies of oceanic circulation, atmospheric processes and past climates by cosmic ray exposure dating. Profiles of long-lived cosmogenic radionuclides in sediments and ice cores, as a function of depth and, thus, age, provide key information on past solar variability, production rate changes and atmospheric transport and deposition mechanisms. Useful paleoclimatic information may be derived from these archives both because deposition is influenced by climate and because solar activity (which influences production) and solar radiance (which influences climate) are correlated. In recent years, emphasis has been put on the development and application of AMS techniques for the measurement of heavier long-lived isotopes, including (99)Tc, (129)I, (236)U and other actinide isotopes. AMS combines ultra low detection limits and the possibility to analyse isotope ratios that can be difficult with traditional instruments and has been used in a number of applications on the consequences and uses of releases from nuclear energy. Finally, the use AMS in environmental sciences is expected to expand further in the foreseeable future with long-lived cosmogenic radionuclides contributing to a large body of knowledge on processes involving atmosphere, oceans, ice sheets, biosphere, soils and sediments.
Environmental Monitoring↗
Potential remobilization of 137Cs, 60Co, 90Tc, and 90Sr from contaminated Mayak sediments in river and estuary environments.
Following 50 years of nuclear production at Mayak PA, sediments in storage reservoirs are significantly contaminated. Dam failure or flooding could potentially transport large amounts of sediments, via rivers, to the Ob estuary and Kara Sea. The objectives of this work were to investigate fresh and seawater remobilization of 137Cs, 50Co, 99Tc, and 90Sr from contaminated Reservoir 10 sediments. Sediments were extracted sequentially using synthetic Techa freshwater, seawater, and chemical reagents with increasing dissolution powers. 137Cs and 90Sr freshwater distribution coefficients (apparent Kd) agreed quite well with published values; values for 99Tc were higher and values for 60Co were lower than expected. In seawater, mean apparent Kd values decreased by 94, 77, 48, and 73% (137Cs, 60Co, 99Tc, and 90Sr, respectively), indicating increased radionuclide mobility. Remobilization in seawater was 5, 15, 1, and 23% of total activities (i.e., releases of 165, 11, 0.3, and 170 kBq kg(-1) d.w.) for 137Cs, 60Co, 99Tc, and 90Sr, respectively. 137Cs and 99Tc were strongly bound to sediments (60% and 80%, respectively). 60Co and 90Sr were more mobile (70% reversibly bound). In conclusion, Mayak Reservoir sediments could potentially contaminate the Ob estuary due to remobilization of sediment-held radionuclides upon contact with seawater.
Environmental Monitoring↗
Comparison of two ICP-MS set-ups for measuring 99Tc in large volume water samples.
Large volume fjord and seawater samples have been radiochemically prepared for ICP-MS analysis in order to test the robustness of the procedure and to carry out a comparison of two ICP-MS set-ups. A sector field instrument (MicroMass PT2) coupled with an ultrasonic nebuliser and a quadrupole ICP-MS (Perkin-Elmer Elan 6000) coupled with an electrothermal vaporisation (ETV) unit were used. The results showed that the radiochemical procedure was robust, removing Ru and Mo to acceptable levels, and that the two set-ups gave results that were in agreement. The correlation coefficient between the sets of 11 results was 1.0 +/- 0.05. The importance of establishing the matrix effect when using an ETV is discussed.
Mass Spectrometry↗
Accelerator mass spectrometry measurement of 240Pu/239Pu isotope ratios in Novaya Zemlya and Kara Sea sediments.
Generally low levels of plutonium in environmental samples, often combined with limited sample sizes, necessitate reliable low-level techniques for determination of Pu isotopes. Accelerator mass spectrometry (AMS) has proved to be a powerful method for measuring low-level Pu activity concentrations and Pu isotope ratios. Based on procedural blanks, detection limits for AMS were below 1 fg Pu (equivalent to ca. 2 microBq 139Pu), which can compete with both TIMS, high sensitivity ICP-MS, and certainly alpha-spectrometry, while showing less interference, memory and matrix effects as compared to routine ICP-MS techniques. In addition to low detection limits, the technique offers the advantage of giving information on Pu isotope ratios. Measurements of sediments collected from dumping sites at Novaya Zemlya showed deviation from global fallout 240Pu/239Pu ratios.
Environmental Monitoring↗