PubMed Health⌕ Search

Biomedical subjects

Deed E Harrison

Publications and source records attributed to Deed E Harrison.

At least 19 recordsLinked to original sources
PubMed2007

Postural development in school children: a cross-sectional study.

BACKGROUND: Little information on quantitative sagittal plane postural alignment and evolution in children exists. The objectives of this study are to document the evolution of upright, static, sagittal posture in children and to identify possible critical phases of postural evolution (maturation). METHODS: A total of 1084 children (aged 4-12 years) received a sagittal postural evaluation with the Biotonix postural analysis system. Data were retrieved from the Biotonix internet database. Children were stratified and analyzed by years of age with n = 36 in the youngest age group (4 years) and n = 184 in the oldest age group (12 years). Children were analyzed in the neutral upright posture. Variables measured were sagittal translation distances in millimeters of: the knee relative to the tarsal joint, pelvis relative to the tarsal joint, shoulder relative to the tarsal joint, and head relative to the tarsal joint. A two-way factorial ANOVA was used to test for age and gender effects on posture, while polynomial trend analyses were used to test for increased postural displacements with years of age. RESULTS: Two-way ANOVA yielded a significant main effect of age for all 4 sagittal postural variables and gender for all variables except head translation. No age x gender interaction was found. Polynomial trend analyses showed a significant linear association between child age and all four postural variables: anterior head translation (p < 0.001), anterior shoulder translation (p < 0.001), anterior pelvic translation (p < 0.001), anterior knee translation (p < 0.001). Between the ages of 11 and 12 years, for anterior knee translation, T-test post hoc analysis revealed only one significant rough break in the continuity of the age related trend. CONCLUSION: A significant linear trend for increasing sagittal plane postural translations of the head, thorax, pelvis, and knee was found as children age from 4 years to 12 years. These postural translations provide preliminary normative data for the alignment of a child's sagittal plane posture.

Journal Article↗
PubMed2006

Muscular contributions to dynamic dorsoventral lumbar spine stiffness.

Spinal musculature plays a major role in spine stability, but its importance to spinal stiffness is poorly understood. We studied the effects of graded trunk muscle stimulation on the in vivo dynamic dorsoventral (DV) lumbar spine stiffness of 15 adolescent Merino sheep. Constant voltage supramaximal electrical stimulation was administered to the L3-L4 interspinous space of the multifidus muscles using four stimulation frequencies (2.5, 5, 10, and 20 Hz). Dynamic stiffness was quantified at rest and during muscle stimulation using a computer-controlled testing apparatus that applied variable frequency (0.46-19.7 Hz) oscillatory DV forces (13-N preload to 48-N peak) to the L3 spinous process of the prone-lying sheep. Five mechanical excitation trials were randomly performed, including four muscle stimulation trials and an unstimulated or resting trial. The secant stiffness (k (y) = DV force/L3 displacement, kN/m) and loss angle (phase angle, deg) were determined at 44 discrete mechanical excitation frequencies. Results indicated that the dynamic stiffness varied 3.7-fold over the range of mechanical excitation frequencies examined (minimum resting k (y) = 3.86 +/- 0.38 N/mm at 4.0 Hz; maximum k (y) = 14.1 +/- 9.95 N/mm at 19.7 Hz). Twenty hertz muscle stimulation resulted in a sustained supramaximal contraction that significantly (P < 0.05) increased k (y) up to twofold compared to rest (mechanical excitation at 3.6 Hz). Compared to rest, k (y) during the 20 Hz muscle stimulation was significantly increased for 34 of 44 mechanical excitation frequencies (mean increase = 55.1%, P < 0.05), but was most marked between 2.55 and 4.91 Hz (mean increase = 87.5%, P < 0.05). For lower frequency, sub-maximal muscle stimulation, there was a graded change in k (y), which was significantly increased for 32/44 mechanical excitation frequencies (mean increase = 40.4%, 10 Hz stimulus), 23/44 mechanical excitation frequencies (mean increase = 10.5%, 5 Hz stimulus), and 11/44 mechanical excitation frequencies (mean increase = 4.16%, 2.5 Hz stimulus) when compared to rest. These results indicate that the dynamic mechanical behavior of the ovine spine is modulated by muscle stimulation, and suggests that muscle contraction plays an important role in stabilizing the lumbar spine.

Animals↗
PubMed2006

Increased multiaxial lumbar motion responses during multiple-impulse mechanical force manually assisted spinal manipulation.

BACKGROUND: Spinal manipulation has been found to create demonstrable segmental and intersegmental spinal motions thought to be biomechanically related to its mechanisms. In the case of impulsive-type instrument device comparisons, significant differences in the force-time characteristics and concomitant motion responses of spinal manipulative instruments have been reported, but studies investigating the response to multiple thrusts (multiple impulse trains) have not been conducted. The purpose of this study was to determine multi-axial segmental and intersegmental motion responses of ovine lumbar vertebrae to single impulse and multiple impulse spinal manipulative thrusts (SMTs). METHODS: Fifteen adolescent Merino sheep were examined. Tri-axial accelerometers were attached to intraosseous pins rigidly fixed to the L1 and L2 lumbar spinous processes under fluoroscopic guidance while the animals were anesthetized. A hand-held electromechanical chiropractic adjusting instrument (Impulse) was used to apply single and repeated force impulses (13 total over a 2.5 second time interval) at three different force settings (low, medium, and high) along the posteroanterior axis of the T12 spinous process. Axial (AX), posteroanterior (PA), and medial-lateral (ML) acceleration responses in adjacent segments (L1, L2) were recorded at a rate of 5000 samples per second. Peak-peak segmental accelerations (L1, L2) and intersegmental acceleration transfer (L1-L2) for each axis and each force setting were computed from the acceleration-time recordings. The initial acceleration response for a single thrust and the maximum acceleration response observed during the 12 multiple impulse trains were compared using a paired observations t-test (POTT, alpha = .05). RESULTS: Segmental and intersegmental acceleration responses mirrored the peak force magnitude produced by the Impulse Adjusting Instrument. Accelerations were greatest for AX and PA measurement axes. Compared to the initial impulse acceleration response, subsequent multiple SMT impulses were found to produce significantly greater (3% to 25%, P < 0.005) AX, PA and ML segmental and intersegmental acceleration responses. Increases in segmental motion responses were greatest for the low force setting (18%-26%), followed by the medium (5%-26%) and high (3%-26%) settings. Adjacent segment (L1) motion responses were maximized following the application of several multiple SMT impulses. CONCLUSION: Knowledge of the vertebral motion responses produced by impulse-type, instrument-based adjusting instruments provide biomechanical benchmarks that support the clinical rationale for patient treatment. Our results indicate that impulse-type adjusting instruments that deliver multiple impulse SMTs significantly increase multi-axial spinal motion.

Journal Article↗
PubMed2006

Validation of a computer analysis to determine 3-D rotations and translations of the rib cage in upright posture from three 2-D digital images.

Since thoracic cage posture affects lumbar spine coupling and loads on the spinal tissues and extremities, a scientific analysis of upright posture is needed. Common posture analyzers measure human posture as displacements from a plumb line, while the PosturePrint claims to measure head, rib cage, and pelvic postures as rotations and translations. In this study, it was decided to evaluate the validity of the PosturePrint Internet computer system's analysis of thoracic cage postures. In a university biomechanics laboratory, photographs of a mannequin thoracic cage were obtained in different postures on a stand in front of a digital camera. For each mannequin posture, three photographs were obtained (left lateral, right lateral, and AP). The mannequin thoracic cage was placed in 68 different single and combined postures (requiring 204 photographs) in five degrees of freedom: lateral translation (Tx), lateral flexion (Rz), axial rotation (Ry), flexion-extension (Rx), and anterior-posterior translation (Tz). The PosturePrint system requires 13 reflective markers to be placed on the subject (mannequin) during photography and 16 additional "click-on" markers via computer mouse before a set of three photographs is analyzed by the PosturePrint computer system over the Internet. Errors were the differences between the positioned mannequin and the calculated positions from the computer system. Average absolute value errors were obtained by comparing the exact inputted posture to the PosturePrint computed values. Mean and standard deviation of computational errors for sagittal displacements of the thoracic cage were Rx=0.3+/-0.1 degrees , Tz=1.6+/-0.7 mm, and for frontal view displacements were Ry=1.2+/-1.0 degrees , Rz=0.6+/-0.4 degrees , and Tx=1.5+/-0.6 mm. The PosturePrint system is sufficiently accurate in measuring thoracic cage postures in five degrees of freedom on a mannequin indicating the need for a further study on human subjects.

Biomechanical Phenomena↗
PubMed2006

Radiographic pseudoscoliosis in healthy male subjects following voluntary lateral translation (side glide) of the thoracic spine.

OBJECTIVE: To determine projected Cobb angles associated with trunk list (side shift) posture, hypothesizing that the side shift "scoliotic" curvature would be similar to true scoliotic curvature in the early stages. DESIGN: Anteroposterior (AP) radiographs of volunteers in neutral, in left, and right lateral translations of the thoracic cage (trunk list) were digitized. SETTING: Computer laboratory. PARTICIPANTS: Fifteen healthy male volunteers. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Cobb and Risser-Ferguson angles determined from digitizing vertebral body corners from T12 to L5 on 51 AP lumbar radiographs. RESULTS: Using the horizontal displacement of T12 from S1, subjects could translate an average of 54.0 mm to the left and 52.5 mm to the right. The average digitized Cobb T12-L5 angle produced for the 30 translated postures was 16 degrees. Angles ranged from 2.6 degrees to 27.0 degrees. Risser-Ferguson angles averaged 10 degrees between T12 and L5. Statistical correlations were found between Cobb L1-5 and translation to the left (P=.015), Cobb T12-L5 and translation to the right (P=.024), Risser-Ferguson angle and translation to the left (P=.021), and the lumbosacral angle to the right and trunk translation to the right (P=.027). CONCLUSIONS: During lateral translation of the thorax (trunk list), coupled lumbar lateral flexion resulted in the appearance of a pseudoscoliosis on AP radiographs. For this trunk list posture, Cobb angles are considerable (16 degrees ) and increase as the magnitude of trunk translation increases. Differentiating true structural scoliosis from this pseudoscoliosis would be clinically important. The small coupled axial rotation in trunk list is in contrast to the considerable degree of axial rotation observed in structural idiopathic scoliosis.

Adult↗
PubMed2005

Spinal manipulation force and duration affect vertebral movement and neuromuscular responses.

BACKGROUND: Previous study in human subjects has documented biomechanical and neurophysiological responses to impulsive spinal manipulative thrusts, but very little is known about the neuromechanical effects of varying thrust force-time profiles. METHODS: Ten adolescent Merino sheep were anesthetized and posteroanterior mechanical thrusts were applied to the L3 spinous process using a computer-controlled, mechanical testing apparatus. Three variable pulse durations (10, 100, 200 ms, force = 80 N) and three variable force amplitudes (20, 40, 60 N, pulse duration = 100 ms) were examined for their effect on lumbar motion response (L3 displacement, L1, L2 acceleration) and normalized multifidus electromyographic response (L3, L4) using a repeated measures analysis of variance. FINDINGS: Increasing L3 posteroanterior force amplitude resulted in a fourfold linear increase in L3 posteroanterior vertebral displacement (p < 0.001) and adjacent segment (L1, L2) posteroanterior acceleration response (p < 0.001). L3 displacement was linearly correlated (p < 0.001) to the acceleration response over the 20-80 N force range (100 ms). At constant force, 10 ms thrusts resulted in nearly fivefold lower L3 displacements and significantly increased segmental (L2) acceleration responses compared to the 100 ms (19%, p = 0.005) and 200 ms (16%, p = 0.023) thrusts. Normalized electromyographic responses increased linearly with increasing force amplitude at higher amplitudes and were appreciably affected by mechanical excitation pulse duration. INTERPRETATION: Changes in the biomechanical and neuromuscular response of the ovine lumbar spine were observed in response to changes in the force-time characteristics of the spinal manipulative thrusts and may be an underlying mechanism in related clinical outcomes.

Animals↗
PubMed2005

Do sagittal plane anatomical variations (angulation) of the cervical facets and C2 odontoid affect the geometrical configuration of the cervical lordosis?

Anthropometric and statistical evaluation of measurements from digitization of 252 lateral cervical radiographs were used to investigate any correlation between radiographic measurements of cervical lordosis with sagittal plane facet angulation, articular pillar height, and inclination of the C2 odontoid with respect to the body of C2. Some researchers have hypothesized that facet and odontoid architecture variations can cause a reduction in cervical lordosis. To evaluate this hypothesis, the posterior aspect of the C2 dens, vertebral body corners, and superior and inferior facet surfaces of C2-C7 were digitized on 252 lateral cervical X-rays to calculate global angle, segmental angles, dens angle, facet angles, and facet height. No correlation between facet angle, articular pillar height, and cervical curve was found. Similarly, no correlation between the sagittal angle of the dens and any angle of cervical curvature was identified. There was correlation between the global ARA C2-C7 angle and the Cobb angles at C1-C7 (r = 0.71) and C2-C7 (r = 0.82). There was correlation between the global inclination of the atlas vertebral angle (APL) and the Cobb angle at C1-C7 (r = 0.66), Cobb angle at C2-C7 (r = 0.39), ARA C2-C7 (r = 0.42), and anterior translation of C2 compared to C7 (r = -0.46). Because no correlation between cervical facet and odontoid architecture and any segmental or global angle of cervical lordosis was found, conservative and surgical rehabilitative techniques aimed at the reduction of sagittal cervical deformities do not need to account for a patient's architecture of the cervical facets nor odontoid.

Adult↗
PubMed2005

Sagittal skin contour of the cervical spine: interexaminer and intraexaminer reliability of the flexicurve instrument.

OBJECTIVES: To evaluate reliability of a simple instrument, the flexicurve, in determining cervical sagittal skin contour. METHODS: This study obtained repeated random measurements involving 3 investigators and 30 subjects once per day over a 2-day trial period. Thirty normal subjects were examined for cervical spine skin contour twice by 3 separate investigators with a 1-day delay. With subjects in a neutral standing position, investigators placed the flexicurve on the posterior portion of the subject's neck from the external occipital protuberance to the vertebral prominens and traced the flexicurve shape onto paper. The tracings were divided into 6 equal arcs and digitized. Statistical computation was performed on the depth at 5 points, arc angle, and arc radius of curvature. Interexaminer and intraexaminer correlation coefficients (ICCs) were calculated to determine reliability. RESULTS: All interexaminer correlation coefficients were in the poor range (<0.40). For the arc radius, arc angle, depth at top one third, and depth at bottom two thirds, the intraexaminer correlation coefficients were in the poor range. For the 3 deepest depths, the intraexaminer correlation coefficients were in the fair range (0.4-0.50). CONCLUSION: The flexicurve showed marginal reliability with most (12/16) ICCs in the poor range (ICC <0.40) and 4 values in the fair range (0.4 < ICC < 0.5).

Adult↗
PubMed2005

Concurrent validity of flexicurve instrument measurements: sagittal skin contour of the cervical spine compared with lateral cervical radiographic measurements.

OBJECTIVES: The aim of this study was to compare flexicurve surface contour measurements of the cervical spine with radiographic measurements of cervical lordosis. METHODS: One examiner evaluated 96 patients with chronic neck pain in neutral posture using a flexible ruler, flexicurve, to measure sagittal contour of the skin over the cervical spine from the external occipital protuberance to the vertebra prominens. The flexicurve skin contour and neutral lateral radiographs were digitized and compared. The flexicurve and radiographs were categorized into height-length ratio, curve angle, curve depth, sum of depths, modified Ishihara's index, and inverse of radius. Mean values, SDs, mean differences, and limits of agreement were calculated. The differences between flexicurve measurement mean values and x-ray mean values were deemed significant if the lower limit of agreement exceeded 15% of the mean values for the x-ray measurements. RESULTS: For all variables, except the height-length ratio, the mean values of the flexicurve variables differed significantly from the corresponding mean values of the radiographic measurements. All Pearson correlation coefficients were in the very poor range (r < 0.15). CONCLUSION: The flexicurve sagittal skin contour measurement has poor concurrent validity compared with established radiographic measurements of the cervical lordosis. The flexicurve tracings always predicted lordosis, overestimated the lordosis compared with x-ray values, and cannot discriminate between radiographic lordosis, straightened, S curves, and kyphotic alignments of the cervical curve.

Adult↗
PubMed2004

Modeling of the sagittal cervical spine as a method to discriminate hypolordosis: results of elliptical and circular modeling in 72 asymptomatic subjects, 52 acute neck pain subjects, and 70 chronic neck pain subjects.

STUDY DESIGN: Computer analysis of digitized vertebral body corners on lateral cervical radiographs. OBJECTIVES: Using elliptical and circular modeling, the geometric shape of the path of the posterior bodies of C2-C7 was sought in normal, acute pain, and chronic pain subjects. To determine the least squares error per point for paths of geometric shapes, minor axis to major axis elliptical ratios (b/a), Cobb angles, sagittal balance of C2 above C7, and posterior tangent segmental and global angles. SUMMARY OF BACKGROUND DATA: When restricted to cervical lordotic configurations, normal, acute pain, and chronic pain subjects have not been compared for similarities or differences of these parameters. Conventional Cobb angles provide only a comparison of the endplates of the distal vertebrae, while geometric modeling provides the shape of the entire sagittal curves, the orientation of the spine, and segmental angles. METHODS: Radiographs of 72 normal subjects, 52 acute neck pain subjects, and 70 chronic neck pain subjects were digitized. For normal subjects, the inclusion criteria were no kyphotic cervical segments, no cranial-cervical symptoms, and less than +/- 10 mm horizontal displacement of C2 above C7. In pain subjects, inclusion criteria were no kyphotic cervical segments and less than 25 mm of horizontal displacement of C2 above C7. Measurements included segmental angles, global angles of lordosis (C1-C7 and C2-C7), height-to-length ratios, anterior weight bearing, and from modeling, circular center, and radius of curvature. RESULTS: In the normal group, a family of ellipses was found to closely approximate the posterior body margins of C2-C7 with a least squares error of less than 1 mm per vertebral body point. The only ellipse/circle found to include T1, with a least squares error of less than 1 mm, was a circle. Compared with the normal group, the pain group's mean radiographic angles were reduced and the radius of curvature was larger. For normal, acute, and chronic pain groups, the mean angles between posterior tangents on C2-C7 were 34.5 degrees, 28.6 degrees, and 22.0 degrees, C2-C7 Cobb angles were 26.8 degrees, 16.5 degrees, and 12.7 degrees, and radius of curvature were r = 132.8 mm, r = 179 mm, and r = 245.4 mm, respectively. CONCLUSIONS: The mean cervical lordosis for all groups could be closely modeled with a circle. Pain groups had hypolordosis and larger radiuses of curvature compared with the normal group. Circular modeling may be a valuable tool in the discrimination between normal lordosis and hypolordosis in normal and pain subjects.

Acute Disease↗
PubMed2004

A non-randomized clinical control trial of Harrison mirror image methods for correcting trunk list (lateral translations of the thoracic cage) in patients with chronic low back pain.

Spinal trunk list is a common occurrence in clinical practice, but few conservative methods of spinal rehabilitation have been reported. This study is a non-randomized clinical control trial of 63 consecutive retrospective subjects undergoing spinal rehabilitation and 23 prospective volunteer controls. All subjects presented with lateral thoracic-cage-translation posture (trunk list) and chronic low back pain. Initial and follow-up numerical pain rating scales (NRS) and AP lumbar radiographs were obtained after a mean of 11.5 weeks of care (average of 36 visits) for the treatment group and after a mean of 37.5 weeks for the control group. The radiographs were digitized and analyzed for a horizontal displacement of T12 from the second sacral tubercle, verticality of the lumbar spine at the sacral base, and any dextro/levo angle at mid-lumbar spine. Treatment subjects received the Harrison mirror image postural correction methods, which included an opposite trunk-list exercise and a new method of opposite trunk-list traction. Control subjects did not receive spinal rehabilitation therapy, but rather self-managed their back pain. For the treatment group, there were statistically significant improvements (approximately 50%) in all radiographic measurements and a decrease in pain intensity (NRS: 3.0 to 0.8). For the control group, no significant radiographic and NRS differences were found, except in trunk-list displacement of T12 to S1, worsened by 2.4 mm. Mirror image (opposite posture) postural corrective exercises and a new method of trunk-list traction resulted in 50% reduction in trunk list and were associated with nearly resolved pain intensity in this patient population. The findings warrant further study in the conservative treatment of chronic low back pain and spinal disorders.

Adult↗
PubMed2004

Anterior thoracic posture increases thoracolumbar disc loading.

In the absence of external forces, the largest contributor to intervertebral disc (IVD) loads and stresses is trunk muscular activity. The relationship between trunk posture, spine geometry, extensor muscle activity, and the loads and stresses acting on the IVD is not well understood. The objective of this study was to characterize changes in thoracolumbar disc loads and extensor muscle forces following anterior translation of the thoracic spine in the upright posture. Vertebral body geometries (C2 to S1) and the location of the femoral head and acetabulum centroids were obtained by digitizing lateral, full-spine radiographs of 13 men and five women volunteers without previous history of back pain. Two standing, lateral, full-spine radiographic views were obtained for each subject: a neutral-posture lateral radiograph and a radiograph during anterior translation of the thorax relative to the pelvis (while keeping T1 aligned over T12). Extensor muscle loads, and compression and shear stresses acting on the IVDs, were calculated for each posture using a previously validated biomechanical model. Comparing vertebral centroids for the neutral posture to the anterior posture, subjects were able to anterior translate +101.5 mm+/-33.0 mm (C7-hip axis), +81.5 mm+/-39.2 mm (C7-S1) (vertebral centroid of C7 compared with a vertical line through the vertebral centroid of S1), and +58.9 mm+/-19.1 mm (T12-S1). In the anterior translated posture, disc loads and stresses were significantly increased for all levels below T9. Increases in IVD compressive loads and shear loads, and the corresponding stresses, were most marked at the L5-S1 level and L3-L4 level, respectively. The extensor muscle loads required to maintain static equilibrium in the upright posture increased from 147.2 N (mean, neutral posture) to 667.1 N (mean, translated posture) at L5-S1. Compressive loads on the anterior and posterior L5-S1 disc nearly doubled in the anterior translated posture. Anterior translation of the thorax resulted in significantly increased loads and stresses acting on the thoracolumbar spine. This posture is common in lumbar spinal disorders and could contribute to lumbar disc pathologies, progression of L5-S1 spondylolisthesis deformities, and poor outcomes after lumbar spine surgery. In conclusion, anterior trunk translation in the standing subject increases extensor muscle activity and loads and stresses acting on the intervertebral disc in the lower thoracic and lumbar regions.

Biomechanical Phenomena↗
PubMed2004

Cervical kyphosis is a possible link to attention-deficit/hyperactivity disorder.

OBJECTIVE: To discuss the case of a patient who was diagnosed with attention-deficit/hyperactivity disorder (ADHD) by a general practitioner and was treated with chiropractic care. CLINICAL FEATURES: A 5-year-old patient was diagnosed with ADHD and treated by a pediatrician unsuccessfully with methylphenidate (Ritalin), Adderall, and Haldol for 3 years. The patient received 35 chiropractic treatments during the course of 8 weeks. A change from a 12 degrees C2-7 kyphosis to a 32 degrees C2-7 lordosis was observed after treatment. During chiropractic care, the child's facial tics resolved and his behavior vastly improved. After 27 chiropractic visits, the child's pediatrician stated that the child no longer exhibited symptoms of ADHD. The changes in structure and function may be related to the correction of cervical kyphosis. CONCLUSION: The patient experienced significant reduction in symptoms. Additionally, the medical doctor concluded that the reduction in symptoms was significant enough to discontinue the medication. There may be a possible connection that correction of cervical kyphosis in patients with ADHD may produce a desirable clinical outcome.

Attention Deficit Disorder with Hyperactivity↗
PubMed2004

Conservative methods for reducing lateral translation postures of the head: a nonrandomized clinical control trial.

Fifty-one retrospective, consecutive patients were compared to twenty-six prospective volunteer controls in a nonrandomized clinical control trial. Both groups had chronic neck pain and lateral head translation posture. For treatment subjects, beginning and follow-up pain scales and anteroposterior (AP) cervical radiographs were obtained after 12.8 weeks of care (average of 37 visits), while the duration was a mean of 12 months for control subjects. Digitized radiographs were analyzed for Risser-Ferguson angles and a horizontal translation distance of C2 from a vertical line through T3. For treatment, patients received the Harrison mirror-image postural methods, which include mechanically assisted manipulation, opposite head posture exercise, and opposite head translation posture traction. While no significant differences were found in the control group subjects' pain scores and AP radiographic measurements, statistically significant improvements were observed in the treatment group subjects' pain scores and lateral translation displacements of C2 compared to T3 (pretrial score: 13.7 mm, posttrial score: 6.8 mm) and in angle measurements.

Adult↗
PubMed2003

Do alterations in vertebral and disc dimensions affect an elliptical model of thoracic kyphosis?

STUDY DESIGN: Mathematical modeling, using least squares method, of thoracic kyphosis was constructed as digitized points from radiographs of 50 healthy patients. OBJECTIVE: To determine a simple geometric model of the thoracic kyphosis. SUMMARY OF BACKGROUND DATA: Thoracic kyphosis is an important parameter of health, but geometric models of kyphosis are rare. Few papers report vertebral body and disc height data. METHODS: Thoracic vertebral bodies were digitized on lateral radiographs of 50 healthy patients. The average path of the posterior vertebral body corners of T1 through T12 was modeled, in the least squares sense, with a portion of an ellipse. The best-fit ellipse was sectioned with different model partitions using four sets of vertebral body heights and disc heights. Segmental and global angles derived from these four models were compared with reported values in the literature. RESULTS: A 72 degrees portion of an ellipse, with a minor-to-major axis ratio of 0.69, can closely approximate the path of the posterior body corners from the inferior of T1 to the superior of T12. The posterior vertebral body heights and disc heights have an average ratio of approximately 5:1. Segmental angles from T3-T4 through T11-T12 for all four models are close to other reported values. The thoracic spine has a height-to-length ratio of approximately 0.96. CONCLUSIONS: Thoracic kyphosis from inferior-posterior T1 to superior-posterior T12 can be closely modeled (least squares error per point < 1 mm) with a 72 degrees piece of an ellipse with a minor-to-major axis ratio of 0.69. The major axis is parallel to the posterior body margin of T12, whereas the minor axis passes through the superior endplate of T12. Segmental angles derived from this elliptical modeling are in the range of values from healthy patients.

Humans↗