PubMed Health⌕ Search

Biomedical subjects

Dennis E Discher

Publications and source records attributed to Dennis E Discher.

At least 37 records · Page 2Linked to original sources

Interactions of membrane-active peptides with thick, neutral, nonzwitterionic bilayers.

Alamethicin is a well-studied channel-forming peptide that has a prototypical amphipathic helix structure. It permeabilizes both microbial and mammalian cell membranes, causing loss of membrane polarization and leakage of endogenous contents. Antimicrobial peptide-lipid systems have been studied quite extensively and have led to significant advancements in membrane biophysics. These studies have been performed on lipid bilayers that are generally charged or zwitterionic and restricted to a thickness range of 3-5 nm. Bilayers of amphiphilic diblock copolymers are a relatively new class of membranes that can have significantly different physicochemical properties compared with those of lipid membranes. In particular, they can be made uncharged, nonzwitterionic, and much thicker than their lipid counterparts. In an effort to extend studies of membrane-protein interactions to these synthetic membranes, we have characterized the interactions of alamethicin and several other membrane-active peptides with diblock copolymer bilayers. We find that although alamethicin is too small to span the bilayer, the peptide interacts with, and ruptures, thick polymer membranes.

Alamethicin↗

Power-law rheology of isolated nuclei with deformation mapping of nuclear substructures.

Force-induced changes in genome expression as well as remodeling of nuclear architecture in development and disease motivate a deeper understanding of nuclear mechanics. Chromatin and green fluorescent protein-lamin B dynamics were visualized in a micropipette aspiration of isolated nuclei, and both were shown to contribute to viscoelastic properties of the somatic cell nucleus. Reversible swelling by almost 200% in volume, with changes in salt, demonstrates the resilience and large dilational capacity of the nuclear envelope, nucleoli, and chromatin. Swelling also proves an effective way to separate the mechanical contributions of nuclear elements. In unswollen nuclei, chromatin is a primary force-bearing element, whereas swollen nuclei are an order of magnitude softer, with the lamina sustaining much of the load. In both cases, nuclear deformability increases with time, scaling as a power law-thus lacking any characteristic timescale-when nuclei are either aspirated or indented by atomic force microscopy. The nucleus is stiff and resists distortion at short times, but it softens and deforms more readily at longer times. Such results indicate an essentially infinite spectrum of timescales for structural reorganization, with implications for regulating genome expression kinetics.

Animals↗

Unfolding a linker between helical repeats.

In many multi-repeat proteins, linkers between repeats have little secondary structure and place few constraints on folding or unfolding. However, the large family of spectrin-like proteins, including alpha-actinin, spectrin, and dystrophin, share three-helix bundle, spectrin repeats that appear in crystal structures to be linked by long helices. All of these proteins are regularly subjected to mechanical stress. Recent single molecule atomic force microscopy (AFM) experiments demonstrate not only forced unfolding but also simultaneous unfolding of tandem repeats at finite frequency, which suggests that the contiguous helix between spectrin repeats can propagate a cooperative helix-to-coil transition. Here, we address what happens atomistically to the linker under stress by steered molecular dynamics simulations of tandem spectrin repeats in explicit water. The results for alpha-actinin repeats reveal rate-dependent pathways, with one pathway showing that the linker between repeats unfolds, which may explain the single-repeat unfolding pathway observed in AFM experiments. A second pathway preserves the structural integrity of the linker, which explains the tandem-repeat unfolding event. Unfolding of the linker begins with a splay distortion of proximal loops away from hydrophobic contacts with the linker. This is followed by linker destabilization and unwinding with increased hydration of the backbone. The end result is an unfolded helix that mechanically decouples tandem repeats. Molecularly detailed insights obtained here aid in understanding the mechanical coupling of domain stability in spectrin family proteins.

Animals↗

gamma-Sarcoglycan deficiency increases cell contractility, apoptosis and MAPK pathway activation but does not affect adhesion.

The functions of gamma-sarcoglycan (gammaSG) in normal myotubes are largely unknown, however gammaSG is known to assemble into a key membrane complex with dystroglycan and its deficiency is one known cause of limb-girdle muscular dystrophy. Previous findings of apoptosis from gammaSG-deficient mice are extended here to cell culture where apoptosis is seen to increase more than tenfold in gammaSG-deficient myotubes compared with normal cells. The deficient myotubes also exhibit an increased contractile prestress that results in greater shortening and widening when the cells are either lightly detached or self-detached. However, micropipette-forced peeling of single myotubes revealed no significant difference in cell adhesion. Consistent with a more contractile phenotype, acto-myosin striations were more prominent in gammaSG-deficient myotubes than in normal cells. An initial phosphoscreen of more than 12 signaling proteins revealed a number of differences between normal and gammaSG(-/-) muscle, both before and after stretching. MAPK-pathway proteins displayed the largest changes in activation, although significant phosphorylation also appeared for other proteins linked to hypertension. We conclude that gammaSG normally moderates contractile prestress in skeletal muscle, and we propose a role for gammaSG in membrane-based signaling of the effects of prestress and sarcomerogenesis.

Animals↗

Visualizing worm micelle dynamics and phase transitions of a charged diblock copolymer in water.

Assemblies of block copolymer amphiphiles are sometimes viewed as glassy, frozen, or static colloids, especially in strongly segregating solutions. Here, we visualize by fluorescence microscopy and AFM the dynamics and transitions of single cylindrical micelles and vesicles composed of a charged diblock copolymer in water. In mapping the salt- and pH-dependent phase diagrams of a near-symmetric diblock of poly(acrylic acid)-polybutadiene, low pH and high salt (NaCl, CaCl2) neutralize and screen the charged corona sufficiently to foster membrane formation and generate vesicles. Decreased salt and neutral pH increases intra-coronal repulsion and drives a transition to multi-branched cylinders and highly stable, but fluid and flexible, worm micelles. Ca2+ both stiffens cylinders and stabilizes them relative to spheres. Further increase of intra-coronal repulsion generates spherical micelles by fragmentation and pinch-off at the ends of worms. Both the transition kinetics and phase diagrams indicate divalent cation is about 5-10-fold more effective than monovalent in stabilizing all nonspherical morphologies.

Hydrogen-Ion Concentration↗

Key roles for chain flexibility in block copolymer membranes that contain pores or make tubes.

Block copolymer amphiphiles that self-assemble into membranes present robust and functionalizable alternatives to biological assemblies. Coarse-grained molecular dynamics shows that thick bilayers of A-B copolymers accommodate protein-like channels and also tend to regulate transport. This occurs as flexible, hydrophilic A chains insert into the pore and obstruct water entry. A-B-A triblocks that exploit "hairpin" and "straight" conformations also show assembly into novel nanotubules and further highlight the key roles for chain flexibility in biomimetic block copolymer assemblies.

Computer Simulation↗

Adhesion-contractile balance in myocyte differentiation.

Tissue cells generally pull on their matrix attachments and balance a quasi-static contractility against adequate adhesion, but any correlation with and/or influence on phenotype are not yet understood. Here, we begin to demonstrate how differentiation state couples to actomyosin-based contractility through adhesion and substrate compliance. Myotubes are differentiated from myoblasts on collagen-patterned coverslips that allow linear fusion but prevent classic myotube branching. Post-fusion, myotubes adhere to the micro-strips but lock into a stress fiber-rich state and do not differentiate significantly further. In contrast, myotubes grown on top of such cells do progress through differentiation, exhibiting actomyosin striations within one week. A compliant adhesion to these lower cells is suggested to couple to contractility and accommodate the reorganization needed for upper cell striation. Contractility is assessed in these adherent cells by mechanically detaching one end of the myotubes. All myotubes, whether striated or not, shorten with an exponential decay. The cell-on-cell myotubes relax more, which implies a greater contractile stress. The non-muscle myosin II inhibitor blebbistatin inhibits relaxation for either case. Myotubes in culture are thus clearly prestressed by myosin II, and this contractility couples to substrate compliance and ultimately influences actomyosin striation.

Actins↗

Myotubes differentiate optimally on substrates with tissue-like stiffness: pathological implications for soft or stiff microenvironments.

Contractile myocytes provide a test of the hypothesis that cells sense their mechanical as well as molecular microenvironment, altering expression, organization, and/or morphology accordingly. Here, myoblasts were cultured on collagen strips attached to glass or polymer gels of varied elasticity. Subsequent fusion into myotubes occurs independent of substrate flexibility. However, myosin/actin striations emerge later only on gels with stiffness typical of normal muscle (passive Young's modulus, E approximately 12 kPa). On glass and much softer or stiffer gels, including gels emulating stiff dystrophic muscle, cells do not striate. In addition, myotubes grown on top of a compliant bottom layer of glass-attached myotubes (but not softer fibroblasts) will striate, whereas the bottom cells will only assemble stress fibers and vinculin-rich adhesions. Unlike sarcomere formation, adhesion strength increases monotonically versus substrate stiffness with strongest adhesion on glass. These findings have major implications for in vivo introduction of stem cells into diseased or damaged striated muscle of altered mechanical composition.

Acrylic Resins↗

Topographical pattern dynamics in passive adhesion of cell membranes.

Strong adhesion of highly active cells often nucleates focal adhesions, synapses, and related structures. Red cells lack such complex adhesion systems and are also nonmotile, but they are shown here to dynamically evolve complex spatial patterns beyond an electrostatic threshold for strong adhesion. Spreading of the cell onto a dense, homogeneous poly-L-lysine surface appears complete in <1 s with occasional blisters that form and dissipate on a similar timescale; distinct rippled or stippled patterns in fluorescently labeled membrane components emerge later, however, on timescales more typical of long-range lipid diffusion (approximately minutes). Within the contact zone, the anionic fluorescent lipid fluorescein phosphoethanolamine is seen to rearrange, forming worm-like rippled or stippled domains of <500 nm that prove independent of whether the cell is intact and sustaining a tension or ruptured. Lipid patterns are accompanied by visible perturbations in Band 3 distribution and weaker perturbations in membrane skeleton actin. Pressing down on the membrane quenches the lipid patterns, revealing a clear topographical basis for pattern formation. Counterion screening and membrane fluctuations likely contribute, but the results primarily highlight the fact that even in adhesion of a passive red cell, regions of strong contact slowly evolve to become interspersed with regions where the membrane is more distant from the surface.

Cell Adhesion↗

The nuclear envelope lamina network has elasticity and a compressibility limit suggestive of a molecular shock absorber.

Mechanical properties of the nuclear envelope have implications for cell and nuclear architecture as well as gene regulation. Using isolated Xenopus oocyte nuclei, we have established swelling conditions that separate the intact nuclear envelope (membranes, pore complexes and underlying lamin filament network) from nucleoplasm and the majority of chromatin. Swelling proves reversible with addition of high molecular mass dextrans. Micropipette aspiration of swollen and unswollen nuclear envelopes is also reversible and yields a network elastic modulus, unaffected by nucleoplasm, that averages 25 mN/m. Compared to plasma membranes of cells, the nuclear envelope is much stiffer and more resilient. Our results suggest that the nuclear lamina forms a compressed network shell of interconnected rods that is extensible but limited in compressibility from the native state, thus acting as a 'molecular shock absorber'. In light of the conservation of B-type lamins in metazoan evolution, the mechanical properties determined in this investigation suggest physical mechanisms by which mutated lamins can either destabilize nuclear architecture or influence nuclear responses to mechanical signals in Emery-Dreifuss muscular dystrophy, cardiomyopathy, progeria syndromes (premature 'aging') and other laminopathies.

Animals↗

Chemistry on a single protein, vascular cell adhesion molecule-1, during forced unfolding.

Proteins of many types experience tensile forces in their normal function, and vascular cell adhesion molecule-1 (VCAM-1) is typical in this. VCAM has seven Ig domains, and each has a disulfide bond (-S-S-) buried in its core that covalently stabilizes about half of each domain against unfolding. VCAM is extended here by single molecule atomic force microscopy in the presence or absence of reducing agents. In the absence of reducing agent, a sawtooth pattern of forced unfolding reveals an average period and total length consistent with disulfide locations in VCAM. With increasing reducing agent, accessible disulfides are specifically reduced (to SH); the average period for unfolding increases up to saturation together with additional metrics of unfolding. Steered molecular dynamics simulations of unfolding indeed show that the core disulfide bond is solvent-exposed in the very earliest stages of protein extension. Michaelis-Menten kinetics emerge with reduction catalyzed by force (tau(reduction) approximately 10(-4) s). The results establish single molecule reduction, one bond at a time, and show that mechanical forces can play a key role in modulating the redox state of cell adhesion proteins that are invariably stressed in cell adhesion.

Disulfides↗

Self-assembly and properties of diblock copolymers by coarse-grain molecular dynamics.

Block-copolymer amphiphiles have been observed to assemble into vesicles and other morphologies long known for lipids but with remarkably different properties. Coarse-grain molecular dynamics (CG-MD) is used herein to elaborate the structures and properties of diblock copolymer assemblies in water. By varying the hydrophilic/hydrophobic ratio of the copolymer in line with experiment, bilayer, cylindrical and spherical micelle morphologies spontaneously assemble. Varying the molecular weight (MW) with hydrophilic/hydrophobic ratio appropriate to a bilayer yields a hydrophobic core thickness that scales for large MW as a random coil polymer, in agreement with experiment. The extent of hydrophobic-segment overlap in the core increases nonlinearly with MW, indicative of chain entanglements and consistent with the dramatic decrease reported for lateral mobility in polymer vesicles. Calculated trends with MW as well as hydrophilic/hydrophobic ratio thus agree with experiment, demonstrating that CG-MD simulations provide a rational design tool for diblock copolymer assemblies.

Computer Simulation↗

Membrane solubilization by detergent: resistance conferred by thickness.

The commonly held model for membrane dissolution by detergents/surfactants requires lipid transport from the inner to the outer bilayer leaflet ('flip-flop'). Although applicable to many systems, it fails in cases where cross-bilayer transport of membrane components is suppressed. In this paper we investigate the mechanism for surfactant-induced solubilization of polymeric bilayers. To that end, we examine the dissolution of a series of increasingly thick, polymer-based vesicles (polymersomes) by a nonionic surfactant, Triton X-100, using dynamic light scattering. We find that increasing the bilayer thickness imparts better resistance to dissolution, so that the concentration required for solubilization, after a fixed amount of time, increases nearly linearly with membrane thickness. Combining our experimental data with a theoretical model, we show that the dominant mechanism for the surfactant-induced dissolution of polymeric vesicles, where polymer flip-flop across the membrane is suppressed, is the surfactant transport through the bilayer. This mechanism is different both qualitatively and quantitatively from the mechanisms by which surfactants dissolve pure lipid vesicles.

Journal Article↗

Self-porating polymersomes of PEG-PLA and PEG-PCL: hydrolysis-triggered controlled release vesicles.

Controlled release polymer vesicles are prepared using hydrolysable diblock copolymers of polyethyleneglycol-poly-l-lactic acid (PEG-PLA) or polyethyleneglycol-polycaprolactone (PEG-PCL). Encapsulation studies with a common anti-cancer agent, doxorubicin, show loading comparable to liposomes. Rates of encapsulant release from the hydrolysable vesicles are accelerated with an increased proportion of PEG but are delayed with a more hydrophobic chain chemistry (i.e. PCL). Rates of release also rise linearly with the molar ratio of degradable copolymer blended into membranes of a non-degradable, PEG-based block copolymer (PEG-polybutadiene (PBD)). With all compositions, in both 100 nm and giant vesicles, the average release time (from hours to days) reflects a highly quantized process in which any given vesicle is either intact and retains its encapsulant, or is porated and slowly disintegrates. Poration occurs as the hydrophobic PLA or PCL block is hydrolytically scissioned, progressively generating an increasing number of pore-preferring copolymers in the membrane. Kinetics of this evolving detergent mechanism overlay the phase behavior of amphiphiles with transitions from membranes to micelles allowing controlled release.

Delayed-Action Preparations↗

Influence of lateral association on forced unfolding of antiparallel spectrin heterodimers.

Protein extensibility appears to be based broadly on conformational changes that can in principle be modulated by protein-protein interactions. Spectrin family proteins, with their extensible three-helix folds, enable evaluation of dimerization effects at the single molecule level by atomic force microscopy. Although some spectrin family members function physiologically only as homodimers (e.g. alpha-actinin) or are strictly monomers (e.g. dystrophin), alpha- and beta-spectrins are stable as monomeric forms but occur physiologically as alpha,beta-heterodimers bound laterally lengthwise. For short constructs of alpha- and beta-spectrin, either as monomers or as alpha,beta-dimers, sawtooth patterns in atomic force microscopy-forced extension show that unfolding stochastically extends repeats approximately 4-5-fold greater in length than native conformations. For both dimers and monomers, distributions of unfolding lengths appear bimodal; major unfolding peaks reflect single repeats, and minor unfolding peaks at twice the length reflect tandem repeats. Cooperative unfolding thus propagates through helical linkers between serial repeats (1, 2). With lateral heterodimers, however, the force distribution is broad and shifted to higher forces. The associated chains in a dimer can stay together and unfold simultaneously in addition to unfolding independently. Weak lateral interactions do not inhibit unfolding, but strong lateral interactions facilitate simultaneous unfolding analogous to serial repeat coupling within spectrin family proteins.

Amino Acid Sequence↗

Patterning, prestress, and peeling dynamics of myocytes.

As typical anchorage-dependent cells myocytes must balance contractility against adequate adhesion. Skeletal myotubes grown as isolated strips from myoblasts on micropatterned glass exhibited spontaneous peeling after one end of the myotube was mechanically detached. Such results indicate the development of a prestress in the cells. To assess this prestress and study the dynamic adhesion strength of single myocytes, the shear stress of fluid aspirated into a large-bore micropipette was then used to forcibly peel myotubes. The velocity at which cells peeled from the surface, V(peel), was measured as a continuously increasing function of the imposed tension, T(peel), which ranges from approximately 0 to 50 nN/ micro m. For each cell, peeling proved highly heterogeneous, with V(peel) fluctuating between 0 micro m/s ( approximately 80% of time) and approximately 10 micro m/s. Parallel studies of smooth muscle cells expressing GFP-paxillin also exhibited a discontinuous peeling in which focal adhesions fractured above sites of strong attachment (when pressure peeled using a small-bore pipette). The peeling approaches described here lend insight into the contractile-adhesion balance and can be used to study the real-time dynamics of stressed adhesions through both physical detection and the use of GFP markers; the methods should prove useful in comparing normal versus dystrophic muscle cells.

Animals↗