Dennis Janssen | PubMed Health

PubMed2007

Finite element-based preclinical testing of cemented total hip implants.

We developed a finite element model to preclinically test cemented hip implants for damage accumulation, including cement crack formation, creep, and stem migration. Using this model, we simulated the mechanical failure processes of four cemented total hip arthroplasty implants (Lubinus SPII, Mueller Curved, Exeter and Charnley, all with known clinical results) during cyclic normal walking and stair-climbing loads. These four implants were selected to ascertain whether the simulation predicted greater damage development around clinically inferior stems, whether clinically inferior designs could be identified by an initial stress analysis without the prediction of cement damage, and whether the simulation could predict high implant subsidence rates in combination with minimal cement damage. Based on the predicted cement crack patterns and crack formation rates, the simulation correctly identified the clinically inferior implant designs. Based only on the initial stress analysis under a stair-climbing load, it was not possible to identify clinically inferior designs. High subsidence values and minimal cement damage were predicted for the Exeter implant, similar to clinical findings. Our findings suggest the simulation may be effective in differentiating between a range of implants and design features.

Bone Cements↗

PubMed2005

The contradictory effects of pores on fatigue cracking of bone cement.

The beneficial effect of porosity reduction on the fatigue life of bone cement has been demonstrated in numerous experimental studies. Clinically, however, it seems that the beneficial effect of porosity reduction of cement around total hip replacement components can only be found in large follow-up studies. Little is known about the actual mechanical effect of a pore on fatigue crack formation in cement mantles. We studied the effect of pores on the crack formation process in a finite element model of a transverse slice of a total hip reconstruction. We created models with a single large pore and models with multiple pores at levels of 2, 4, and 9%. The models were cyclically torque-loaded, causing macrocracks to appear in the cement mantle. In all models, we found that pores acted as microcrack initiators. However, pores could have both a detrimental and a beneficial effect on the macrocrack propagation in the cement mantle. Both effects were seen in the models with a single large pore and in the models with multiple pores. Pores would either accelerate, deviate, or decelerate the macrocrack propagation in the cement mantle. The effect of the pores depended on the location of the pores with respect to the stress intensities in the model, but was independent of the pore size or the level of porosity. The results may explain why the beneficial effect of vacuum mixing is difficult to demonstrate clinically. Stress intensities that are present in a cement mantle in an in vivo situation may overshadow the detrimental effect of a pore, while the beneficial effect may become more pronounced.

Bone Cements↗