Biomedical subjects

Derek G Gray

Publications and source records attributed to Derek G Gray.

6 recordsLinked to original sources

PubMed2006

Induced phase separation in low-ionic-strength cellulose nanocrystal suspensions containing high-molecular-weight blue dextrans.

Spontaneous entropic phase separation phenomena occur in a wide range of systems containing highly anisotropic colloidal particles. Among these are aqueous suspensions of negatively charged cellulose I nanocrystals produced by sulfuric acid hydrolysis of native cellulose, which phase separate into isotropic and chiral nematic liquid-crystalline phases. Phase separation of an isotropic phase from a completely ordered nanocrystal suspension may be induced by the addition of salts or nonadsorbing macromolecules. In previous work (Edgar, C. D.; Gray, D. G. Macromolecules 2002, 35, 7400-7406), an isotropic phase was found to form over a period of several days when blue dextran (a sulfonated triazine dye, Cibacron blue 3G-A, covalently attached to high-molecular-weight dextran chains) was added to initially ordered suspensions. Here we report work showing that the observed phase separation was associated with the charged dye molecules attached to the dextran. The Cibacron blue 3G-A dye attached to blue dextran was found to induce greater phase separation than free (unbound) dye; at increasing ionic strength, depletion attractions due to the blue dextran increasingly contribute to the phase separation.

Journal Article↗

PubMed2006

Friction and forces between cellulose model surfaces: a comparison.

Four different cellulose model surfaces, and one silica surface, have been studied by means of atomic force microscopy (AFM). The normal interactions have been found to consist of a longer range double layer force with a short range steric interaction, the nature of which is extensively discussed. Both the surface charge and range of the steric force depend on the type of cellulose substrate used, as does the magnitude of the adhesion. Studies of friction reveal that surface roughness is the determining factor for the friction coefficient, with which it increases monotonically. The absolute value, however, is determined by the surface chemistry. All studied cellulose surfaces show similar behavior in response to xyloglucan addition.

Cellulose↗

PubMed2006

Surface forces measurements of spin-coated cellulose thin films with different crystallinity.

A systematic study of the surface forces between a cellulose sphere and cellulose thin films of varying crystallinity has been conducted as a function of ionic strength and pH. Semicrystalline cellulose II surfaces and amorphous cellulose films were prepared by spin-coating of the precursor cellulose solutions onto oxidized silicon wafers before regeneration in water. Crystalline cellulose I surfaces were prepared by spin-coating wafers with aqueous suspensions of sulfate-stabilized cellulose I nanocrystals. These preparation methods produced thin, smooth films suitable for surface forces measurements. The interaction with the cellulose I was monotonically repulsive at pH 3.5, 5.8, and 8.5 and at 0.1, 1, and 10 mM ionic strengths. This was attributed to the presence of strongly ionizable sulfur-containing groups on the cellulose nanocrystal surfaces. The amorphous film typically showed a steric interaction up to 100 nm away from the interface that was independent of the solution conditions. A range of surface forces were successfully measured on the semicrystalline cellulose II films; attractive and repulsive regimes were observed, depending on pH and ionic strength, and were interpreted in terms of van der Waals and electrostatic interactions. Clearly, the forces acting near cellulose surfaces are very dependent on the way the cellulose surface has been prepared.

Cellulose↗

PubMed2006

Morphological and optical characterization of polyelectrolyte multilayers incorporating nanocrystalline cellulose.

Aqueous layer-by-layer (LbL) processing was used to create polyelectrolyte multilayer (PEM) nanocomposites containing cellulose nanocrystals and poly(allylamine hydrochloride). Solution-dipping and spin-coating assembly methods gave smooth, stable, thin films. Morphology was studied by atomic force microscopy (AFM) and scanning electron microscopy (SEM), and film growth was characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry, and optical reflectometry. Relatively few deposition cycles were needed to give full surface coverage, with film thicknesses ranging from 10 to 500 nm. Films prepared by spin-coating were substantially thicker than solution-dipped films and displayed radial orientation of the rod-shaped cellulose nanocrystals. The relationship between film color and thickness is discussed according to the principles of thin film interference and indicates that the iridescent properties of the films can be easily tailored in this system.

Adsorption↗

PubMed2005

Parabolic focal conics in self-assembled solid films of cellulose nanocrystals.

Suspensions of cellulose nanocrystals form colloidal chiral nematic phases. The liquid crystalline order in these suspensions can be captured in solid films by slow evaporation of the liquid. Studies of the microstructure of such chiral nematic solid films revealed parabolic focal conic (PFC) defects, a symmetric form of focal conic defects in which the line defects form a pair of perpendicular, antiparallel, and confocal parabolas. The cellulose films with PFC defects were characterized by polarized-light and atomic force microscopy. The film surface showed a regular array of large and small elevations resulting from the displacement of the structural layers. Film fracture lines showed a series of layered half-cones. The microstructure of the films was modeled by computer. The model revealed that many structural layers terminate at the film surface.

Cellulose↗

PubMedDate not supplied

Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions.

Sulfuric acid hydrolysis of native cellulose fibers produces stable suspensions of cellulose nanocrystals. Above a critical concentration, the suspensions spontaneously form an anisotropic chiral nematic liquid crystal phase. We have examined the effect of reaction time and acid-to-pulp ratio on nanocrystal and suspension properties for hydrolyzed black spruce acid sulfite pulp. Longer hydrolysis times produced shorter, less polydisperse black spruce cellulose nanocrystals and slightly increased the critical concentration for anisotropic phase formation. Increased acid-to-pulp ratio reduced the dimensions of the nanocrystals thus produced; the critical concentration was increased and the biphasic range became narrower. A suspension made from a bleached kraft eucalyptus pulp gave very similar properties to the softwood nanocrystal suspension when prepared under similar hydrolysis conditions.

Anisotropy↗