Biomedical subjects

Dewey H Barich

Publications and source records attributed to Dewey H Barich.

11 recordsLinked to original sources

PubMed2006

Solid-state NMR spectra and long intradimer bonds in the pi-[TCNE]22- dianion.

The principal (13)C chemical-shift values for the pi-[TCNE](2)(2-) dimer anion within an array of counterions have been measured to understand better the electronic structure of these atypical chemical species in several related TCNE-based structures. The structure of pi-[TCNE](2)(2-) is unusual as it contains two very long C-C bond lengths (ca. 2.9 Angstroms) between the two monomeric units and has been found to exist as a singlet state, suggestive of a (1)A(1g) (b(2u)(2)b(1g)(0)) electronic configuration. A systematic study of several oxidation states of [TCNE](n) (n = 0, 1-, 2-) was conducted to determine how the NMR chemical-shift tensor values change as a function of electronic structure and to understand the interactions that lead to spin-pairing of the monomer units. The density functional theory (DFT) calculated nuclear shielding tensors are correlated with the experimentally determined principal chemical-shift values. Such theoretical methods provide information on the tensor magnitudes and orientations of their principal tensor components with respect to the molecular frame. Both theoretical and experimental ethylenic chemical-shielding tensors reveal high sensitivity in the component, delta(perpendicular), lying in the monomer molecular plane and perpendicular to the pi-electron plane. This largest shift dependence on charge density is observed to be about -111 ppm/e(-) for delta(perpendicular). The component in the molecular plane but parallel to the central C=C bond, delta(parallel), exhibits a sensitivity of approximately -43 ppm/e(-). However, the out-of-plane component delta'(perpendicular) shows a minimal dependence of -2.6 ppm/e(-) on the oxidation state (n) of [TCNE](n). These relative values support the claim that it is changes within the ethylenic pi-electrons and not the sigma-electrons that best account for the dramatic variations in bonding and shift tensors in this series of compounds. Concerning the intraion bonding, relatively weak Wiberg bond orders between the two monomeric components of the dimer correlate with the long bonds linking the two [TCNE(*)](-) monomers. The chemical-shift tensors for the cyano group, compared to the ethylene shifts, exhibit a reduced sensitivity on the TCNE oxidation state. The experimental principal chemical-shift components agree (within typical errors) with the calculated quantum mechanical shieldings used to correlate the bonding. The embedded ion model (EIM) was used to investigate the typically large electrostatic lattice potential in these ionic materials. Chemical-shielding principal values calculated with the EIM model differ from experiment by +/-3.82 ppm on average, whereas in the absence of an electrostatic field model, the experimental and theoretical results agree by +/-4.42 ppm, which is only a modest increase in error considering the overall ionic magnitudes associated with the tensor variations. Apparently, the effects of the sizable long-range electrostatic fields cancel when the shifts are computed because of lattice symmetry.

Anions↗

PubMed2006

3-Methylglutaric acid as a 13C solid-state NMR standard.

The calibration of a solid-state NMR spectrometer requires setting the magic angle, setting the reference and decoupler frequencies, ensuring that the magnetic field is homogeneous across the sample volume, optimizing the signal-to-noise ratio, determining the pi/2 pulse durations, and optimizing the Hartman-Hahn matching condition. Each task has one or more widely accepted standards, such as potassium bromide for setting the magic angle, adamantane for optimizing magnet homogeneity, and hexamethylbenzene or glycine for measuring the signal-to-noise ratio. We show that all of these tasks can be performed using 3-methylglutaric acid (MGA). In the case of high-powered decoupling, the CH(2) and CH carbon peaks of MGA provide an opportunity to evaluate the decoupling in a manner that is superior to any of the commonly used standard compounds. Thus, MGA can be used as a single solid-state NMR standard compound to perform all calibration steps except for magnet shimming.

Carbon Isotopes↗

PubMed2006

CB11Me11 boronium ylides: carba-closo-dodecaboranes with a naked boron vertex.

In pentane solution, 2 equiv of the icosahedral CB(11)Me(12)(*) radical cleaves the Si-Si bond of hexaalkyldisilanes by boron to silicon methyl transfer with formation of 2 equiv of methyltrialkylsilanes. The loss of a methyl radical converts the CB(11)Me(12)(*) radical into an internally charge-compensated "boronium ylide" CB(11)Me(11) with a naked vertex, which can be formally viewed as a deprotonated hypercloso carborane. It has been isolated as an air-sensitive solid, stable only below approximately -60 degrees C. The naked vertex appears to be in position 12 since the material reacts instantaneously with alcohols and ethers to form the 12-alkoxy anions 12-CB(11)Me(11)OR. It reacts with many other nucleophiles to yield more complex mixtures containing similar products. DFT calculations for the four CB(11)Me(11) isomers give closed-shell ground-state electronic structures. For the isomer with naked vertex 12, a DFT computational search failed to reveal any skeletal dimers, apparently due to excessive methyl-methyl repulsions, and only a cyclic dimer bound through weak interactions of one of the 7-methyl hydrogen atoms on each cage with the empty exocyclic orbitals on B12 of the other cage was found. Natural hybrid orbital populations suggest that the three possible isomers of monomeric boronium ylides are close to true singlet ylides, with triplet states approximately 50 kcal/mol higher. The calculated electronic structure of the carbonium ylide is close to a singlet carbene, with a triplet state approximately 16 kcal/mol higher. An attempted preparation of Me(3)C(+)CB(11)Me(12)(-) yielded neopentane and products consistent with a sequential loss of methyl groups from the carborane cage with a transient formation of similar boronium ylides. Probable mechanisms of these methyl transfer reactions are considered, and the possibly quite general role of "ylide" structures in Lewis acid induced substitution reactions on the boron vertices of carboranes and boranes is noted.

Journal Article↗

PubMed2006

Investigation of solid-state NMR line widths of ibuprofen in drug formulations.

Solid-state nuclear magnetic resonance spectroscopy (SSNMR) line widths were measured for various ibuprofen preparations, including crystallization from different solvents (acetone, acetonitrile, methanol), melt-quenching, manual grinding, cryogrinding, compacting, and by blending with various excipients. Ibuprofen recrystallized from acetonitrile exhibited broader lines than ibuprofen recrystallized from either acetone or methanol. Manually ground ibuprofen had SSNMR line widths that were indistinguishable from the commercial sample, but cryoground ibuprofen had larger line widths than either. Physical mixtures with most excipients decreased the SSNMR line widths. Only dilution in talc led to line width increases, which is attributed to the magnetic susceptibility anisotropy of the talc excipient. Our results show that SSNMR line widths can be used to understand physical characteristics including particle size and morphology, degree of order in the materials, and physical environment.

Chemistry, Pharmaceutical↗

PubMed2005

Multiple-sample probe for solid-state NMR studies of pharmaceuticals.

Solid-state NMR spectroscopy (SSNMR) is an extremely powerful technique for the analysis of pharmaceutical dosage forms. A major limitation of SSNMR is the number of samples that can be analyzed in a given period of time. A solid-state magic-angle spinning (MAS) probe that can simultaneously acquire up to seven SSNMR spectra is being developed to increase throughput/signal-to-noise ratios. A prototype probe incorporating two MAS modules has been developed and spectra of ibuprofen and aspirin have been acquired simultaneously. This version is limited to being a two-module probe due to large amounts of space required for the tuning elements located next to the MAS modules. A new probe design incorporating coaxial transmission lines and smaller MAS modules has been constructed. This probe allows for close proximity of the MAS modules (within 3 cm), adequate proton decoupling power (>50 kHz), and the capability of remote tuning and sample changing. Spectra of hexamethylbenzene (HMB) have been acquired and show signal-to-noise ratios comparable to existing SSNMR probes. Adamantane line widths are also comparable to conventional probe technology. Decoupling powers of 70 kHz have been achieved using a MAS module suitable for 3 cm spacing between modules. Remote tuning has also been achieved with this new coaxial transmission line design. This probe design can be easily scaled to incorporate multiple MAS modules, which is a limitation of the previous design. The number of modules that can be incorporated is only limited by the number of transmission lines that will fit in a cross-sectional diameter of the bore and the axial field length of the magnet.

Complex Mixtures↗

PubMed2005

Quantitation of crystalline and amorphous forms of anhydrous neotame using 13C CPMAS NMR spectroscopy.

Although most drugs are formulated in the crystalline state, amorphous or other crystalline forms are often generated during the formulation process. The presence of other forms can dramatically affect the physical and chemical stability of the drug. The identification and quantitation of different forms of a drug is a significant analytical challenge, especially in a formulated product. The ability of solid-state 13C NMR spectroscopy with cross polarization (CP) and magic-angle spinning (MAS) to quantify the amounts of three of the multiple crystalline and amorphous forms of the artificial sweetener neotame is described. It was possible to quantify, in a mixture of two anhydrous polymorphic forms of neotame, the amount of each polymorph within 1-2%. In mixtures of amorphous and crystalline forms of neotame, the amorphous content could be determined within 5%. It was found that the crystalline standards that were used to prepare the mixtures were not pure crystalline forms, but rather a mixture of crystalline and amorphous forms. The effect of amorphous content in the crystalline standards on the overall quantitation of the two crystalline polymorphic forms is discussed. The importance of differences in relaxation parameters and CP efficiencies on quantifying mixtures of different forms using solid-state NMR spectroscopy is also addressed.

Calorimetry, Differential Scanning↗

PubMed2004

Metal cation-methyl interactions in CB11Me12(-) salts of Me3Ge+, Me3Sn+, and Me3Pb+.

Oxidation of Me(6)M(2) (M = Ge, Sn) and Me(4)Pb with the CB(11)Me(12)(*) radical in alkane solvents produced the insoluble salts Me(3)M(+)CB(11)Me(12)(-), characterized by CP-MAS NMR and EXAFS. The cations interact with methyl groups of CB(11)Me(12)(-) with coordination strength increasing from Pb to Ge. Density functional theory (DFT) calculations for the isolated ion pairs, Me(3)M(+)CB(11)Me(12)(-) (M = Ge, Sn), revealed three isomers with the cation above methyl 2, 7, or 12, and not above a BB edge or a BBB triangle. The interaction has a considerable covalent component, with the cation attempting to perform a backside S(E)2 substitution on the methyl carbon. In a fourth less favorable isomer the cation is near methyl 1, inclined toward methyl 2, and interacts with hydrogens. DFT atomic charge distributions and plots of the electrostatic potential on the surface of spheres centered at the CB(11)H(12)(-) and CB(11)Me(12)(-) icosahedra display the effects of uneven charge distribution within the anion and contradict the common belief that the negative charge of the cage anion is concentrated primarily on the cage boron atoms 7-12; in CB(11)Me(12)(-), roughly half is on the cage carbon and the rest on methyls 7-12.

Boron Compounds↗

PubMed2004

2,4-dimethoxybenzoic acid and 2,5-dimethoxybenzoic acid.

The title compounds (both C(9)H(10)O(4)) have nearly planar structures, and the methyl and/or carboxylic acid groups lie out of the molecular plane, as dictated by steric interactions. 2,5-Dimethoxybenzoic acid (2,5-DMBA) forms an unusual intramolecular hydrogen bond between the carboxylic acid group and the O atom of the methoxy group in the 2-position [O.O = 2.547 (2) A and O-H.O = 154 (3) degrees ]. 2,4-DMBA forms a typical hydrogen-bond dimer with a neighboring molecule.

Journal Article↗

PubMed2004

Solid-state 15N NMR studies of tobacco leaves.

Nitrogen-containing compounds are one important class of constituents in tobacco because of various pharmacological and biological properties. Three types of tobacco leaves (burley, bright, and oriental) were studied using solid-state (15)N NMR cross polarization with magic-angle spinning, dipolar dephasing and five pi replicated magic angle turning (FIREMAT) experiments. The results show that burley tobacco leaves contain significantly more pyridinic nitrogen than that of bright or oriental tobacco leaves. The principal values of (15)N chemical shift tensors of nitrogen functional groups were obtained from the FIREMAT data. Possible assignments of solid-state (15)N NMR resonances were made using nitrogen chemical shift tensors in some model compounds or isotropic chemical shift values from liquid NMR results. To the best of our knowledge, this is the first solid-state (15)N NMR study of tobacco plant material.

Magnetic Resonance Spectroscopy↗

PubMed2003

Stereochemical analysis by solid-state NMR: structural predictions in ambuic acid.

Relative stereochemistry is predicted for ambuic acid using a novel solid-state NMR approach. This NMR technique entails a comparison of measured shift tensor principal values with computed values for all diastereomers, allowing the selection of a best-fit structure. The proposed method extends previous solution NMR structural data by simultaneously modeling with high statistical probability hydrogen-bonding arrangements and molecular conformation at two positions. A dimeric structure is proposed for ambuic acid based on the initial poor fit of the carboxyl carbon tensors to a monomeric model. The dimer model, consisting of hydrogen bonding between pairs of neighboring carboxyl groups, reduces the root mean square error at the carboxy tensor by a factor of 2.7. Lattice details are thus also described by the proposed approach. The structural characterization method presented is of general applicability and may be especially useful for characterizing difficult to crystallize or hydrogen-poor materials.

Carbon Isotopes↗

PubMed2002

13C NMR investigation of solid-state polymorphism in 10-deacetyl baccatin III.

To investigate the origins of solid-state NMR shift differences in polymorphs, carbon NMR chemical shift tensors are measured for two forms of solid 10-deacetyl baccatin III: a dimethyl sulfoxide (DMSO) solvate and an unsolvated form. A comparison of ab initio computed tensors that includes and omits the DMSO molecules demonstrates that lattice interactions cannot fully account for the shift differences in the two forms. Instead, conformational differences in the cyclohexenyl, benzoyl, and acetyl moieties are postulated to create the differences observed. X-ray analysis of six baccatin III analogues supports the suggested changes in the cyclohexenyl and benzoyl systems. The close statistical match of the (13)C chemical shifts of both polymorphic forms with those calculated using the X-ray geometry of 10-deacetyl baccatin III supports the contention that the B, C, and D rings are fairly rigid. Therefore, the observed tensor differences appear to arise primarily from conformational variations in ring substituents and the cyclohexenyl ring.

Carbon Isotopes↗