Biomedical subjects

Dominique Barchiesi

Publications and source records attributed to Dominique Barchiesi.

7 recordsLinked to original sources

PubMed2006

Tomography of the near-field optical signal.

In near-field optics, measurement of vertical variations of the near field is of great interest for characterizing the efficiency of resonances such as surface plasmon polaritons. The use of the signal obtained through the lock-in amplifier using a feedback on the vertical vibration of the probe is shown to enable the reconstruction of the near field without the use of the slower technique of approach curves. Therefore, a tomography of the near field is directly available.

Journal Article↗

PubMed2006

Scanning near-field optical data contrast measurement: a tomographylike near-field reconstruction.

A method for the reconstruction of near-field optical signals is proposed to produce a tomographylike map of the field above the nanostructures being studied. The data obtained through lock-in detection are processed employing Chebyshev's polynomial function of the distance between the probe and the sample. The method is first applied to numerically generated near-field evanescent data, with three different decreasing lengths, and then applied to an experimental signal. Therefore the contrast of the signal above nanostructures is discussed to underline the discrepancy between the scanning near-field optical microscopy data and the reconstructions.

Journal Article↗

PubMed2004

Coupling semiconductor lasers into single-mode optical fibers by use of tips grown by photopolymerization.

We show that a polymer tip, integrated by free-radical photopolymerization at the end of a telecommunication optical fiber, allows high-efficiency coupling between the fiber and an infrared laser diode. A coupling efficiency of 70% (1.5-dB loss) was achieved. We obtained this result by controlling the radius of curvature of the tip, the origin of which is discussed in terms of the photochemical influence of oxygen during tip formation. The experimental data were found to be in agreement with results of electromagnetic calculations based on the finite-element method.

Journal Article↗

PubMed2004

Near-field optical patterning and structuring based on local-field enhancement at the extremity of a metal tip.

We present a particular approach and the associated results allowing the nanostructuration of a thin photosensitive polymer film. This approach based on a scanning near-field optical microscopy configuration uses the field-enhancement (FE) effect, a so-called lightning-rod effect appearing at the extremity of a metallic tip when illuminated with an incident light polarized along the tip axis. The local enhancement of the electromagnetic field straight below the tip's apex is observed directly through a photoisomerization reaction, inducing the growth of a topographical nanodot characterized in situ by atomic-force microscopy using the same probe. From a survey of the literature, we first review the different experimental approaches offered to nanostructure materials by near-field optical techniques. We describe more particularly the FE effect approach. An overview of the theoretical approach of this effect is then given before presenting some experimental results so as theoretical results using the finite-element method. These results show the influence on the nanostructuration of the polymer of a few experimental parameters such as the polarization state, the illumination mode and the tip's geometry. Finally, the potentiality of this technique for some applications in the field of lithography and high-density data storage is shown via the fabrication of nano-patterns.

Journal Article↗

PubMed2004

Application of evolution strategies for the solution of an inverse problem in near-field optics.

We introduce an inversion procedure for the characterization of a nanostructure from near-field intensity data. The method proposed is based on heuristic arguments and makes use of evolution strategies for the solution of the inverse problem as a nonlinear constrained-optimization problem. By means of some examples we illustrate the performance of our inversion method. We also discuss its possibilities and potential applications.

Journal Article↗

PubMed2003

Apertureless scanning near-field optical microscopy: the need for probe-vibration modeling.

In apertureless scanning near-field optical microscopy (ASNOM), the probe vibration is often used to increase the detected signal. The useful signal is detected at the probe-vibration frequency by a lock-in amplifier. By comparing two-dimensional numerical results with an experimental scan, we show numerically that, to explain or predict the detected signal, a realistic model of ASNOM should take into account the scan of the probe as well as the probe vibration and the material properties.

Journal Article↗

PubMed2003

Electromagnetic beam diffraction by a finite lamellar structure: an aperiodic coupled-wave method.

We have developed a new formulation of the coupled-wave method (CWM) to handle aperiodic lamellar structures, and it will be referred to as the aperiodic coupled-wave method (ACWM). The space is still divided into three regions, but the fields are written by use of their Fourier integrals instead of the Fourier series. In the modulated region the relative permittivity is represented by its Fourier transform, and then a set of integro-differential equations is derived. Discretizing the last system leads to a set of ordinary differential equations that is reduced to an eigenvalue problem, as is usually done in the CWM. To assess the method, we compare our results with three independent formalisms: the Rayleigh perturbation method for small samples, the volume integral method, and the finite-element method.

Journal Article↗