Biomedical subjects

Dominique Didry

Publications and source records attributed to Dominique Didry.

12 recordsLinked to original sources

PubMed2007

How ATP hydrolysis controls filament assembly from profilin-actin: implication for formin processivity.

Formins catalyze rapid filament growth from profilin-actin, by remaining processively bound to the elongating barbed end. The sequence of elementary reactions that describe filament assembly from profilin-actin at either free or formin-bound barbed ends is not fully understood. Specifically, the identity of the transitory complexes between profilin and actin terminal subunits is not known; and whether ATP hydrolysis is directly or indirectly coupled to profilin-actin assembly is not clear. We have analyzed the effect of profilin on actin assembly at free and FH1-FH2-bound barbed ends in the presence of ADP and non-hydrolyzable CrATP. Profilin blocked filament growth by capping the barbed ends in ADP and CrATP/ADP-Pi states, with a higher affinity when formin is bound. We confirm that, in contrast, profilin accelerates depolymerization of ADP-F-actin, more efficiently when FH1-FH2 is bound to barbed ends. To reconcile these data with effective barbed end assembly from profilin-MgATP-actin, the nature of nucleotide bound to both terminal and subterminal subunits must be considered. All data are accounted for quantitatively by a model in which a barbed end whose two terminal subunits consist of profilin-ATP-actin cannot grow until ATP has been hydrolyzed and Pi released from the penultimate subunit, thus promoting the release of profilin and allowing further elongation. Formin does not change the activity of profilin but simply uses it for its processive walk at barbed ends. Finally, if profilin release from actin is prevented by a chemical cross-link, formin processivity is abolished.

Actins↗

PubMed2006

IQGAP1 stimulates actin assembly through the N-WASP-Arp2/3 pathway.

IQGAP1 is a conserved modular protein overexpressed in cancer and involved in organizing actin and microtubules in motile processes such as adhesion, migration, and cytokinesis. A variety of proteins have been shown to interact with IQGAP1, including the small G proteins Rac1 and Cdc42, actin, calmodulin, beta-catenin, the microtubule plus end-binding proteins CLIP170 (cytoplasmic linker protein) and adenomatous polyposis coli. However, the molecular mechanism by which IQGAP1 controls actin dynamics in cell motility is not understood. Quantitative co-localization analysis and down-regulation of IQGAP1 revealed that IQGAP1 controls the co-localization of N-WASP with the Arp2/3 complex in lamellipodia. Co-immunoprecipitation supports an in vivo link between IQGAP1 and N-WASP. Pull-down experiments and kinetic assays of branched actin polymerization with N-WASP and Arp2/3 complex demonstrated that the C-terminal half of IQGAP1 activates N-WASP by interacting with its BR-CRIB domain in a Cdc42-like manner, whereas the N-terminal half of IQGAP1 antagonizes this activation by association with a C-terminal region of IQGAP1. We propose that signal-induced relief of the autoinhibited fold of IQGAP1 allows activation of N-WASP to stimulate Arp2/3-dependent actin assembly.

Actin-Related Protein 2↗

PubMed2006

Analysis of tetramethylrhodamine-labeled actin polymerization and interaction with actin regulatory proteins.

The hydrolysis of ATP accompanying actin polymerization destabilizes the filament, controls actin assembly dynamics in motile processes, and allows the specific binding of regulatory proteins to ATP- or ADP-actin. However, the relationship between the structural changes linked to ATP hydrolysis and the functional properties of actin is not understood. Labeling of actin Cys374 by tetramethylrhodamine (TMR) has been reported to make actin non-polymerizable and enabled the crystal structures of ADP-actin and 5'-adenylyl beta,gamma-imidodiphosphate-actin to be solved. TMR-actin has also been used to solve the structure of actin in complex with the formin homology 2 domain of mammalian Dia1. To understand how the covalent modification of actin by TMR may affect the structural changes linked to ATP hydrolysis and to evaluate the functional relevance of crystal structures of TMR-actin in complex with actin-binding proteins, we have analyzed the assembly properties of TMR-actin and its interaction with regulatory proteins. We show that TMR-actin polymerized in very short filaments that were destabilized by ATP hydrolysis. The critical concentrations for assembly of TMR-actin in ATP and ADP were only an order of magnitude higher than those for unlabeled actin. The functional interactions of actin with capping proteins, formin, actin-depolymerizing factor/cofilin, and the VCA-Arp2/3 filament branching machinery were profoundly altered by TMR labeling. The data suggest that TMR labeling hinders the intramolecular movements of actin that allow its specific adaptative recognition by regulatory proteins and that determine its function in the ATP- or ADP-bound state.

Actin Capping Proteins↗

PubMed2006

Mammalian twinfilin sequesters ADP-G-actin and caps filament barbed ends: implications in motility.

Twinfilins are conserved actin-binding proteins composed of two actin depolymerizing factor homology (ADF-H) domains. Twinfilins are involved in diverse morphological and motile processes, but their mechanism of action has not been elucidated. Here, we show that mammalian twinfilin both sequesters ADP-G-actin and caps filament barbed ends with preferential affinity for ADP-bound ends. Twinfilin replaces capping protein and promotes motility of N-WASP functionalized beads in a biomimetic motility assay, indicating that the capping activity supports twinfilin's function in motility. Consistently, in vivo twinfilin localizes to actin tails of propelling endosomes. The ADP-actin-sequestering activity cooperates with the filament capping activity of twinfilin to finely regulate motility due to processive filament assembly catalyzed by formin-functionalized beads. The isolated ADF-H domains do not cap barbed ends nor promote motility, but sequester ADP-actin, the C-terminal domain showing the highest affinity. A structural model for binding of twinfilin to barbed ends is proposed based on the similar foldings of twinfilin ADF-H domains and gelsolin segments.

Actin Cytoskeleton↗

PubMed2006

Characterization of TccP-mediated N-WASP activation during enterohaemorrhagic Escherichia coli infection.

Subversion of the host cell cytoskeleton is the hallmark of enterohaemorrhagic Escherichia coli (EHEC) infection. EHEC translocates the trans-membrane receptor protein Tir (translocated intimin receptor), which links the extracellular bacterium to the eukaryotic cell actin cytoskeleton, triggering formation of actin-rich pedestals beneath adherent bacteria. Tir-mediated actin accretion by EHEC requires TccP (Tir cytoskeleton coupling protein), a recently discovered type III secretion system effector protein which, following translocation, binds and activates Wiskott-Aldrich syndrome protein (N-WASP), which in turn activates the actin-related protein 2/3 complex leading to localized polymerization of actin. In this study, truncated N-WASP and TccP derivatives were generated and tested in in vitro actin polymerization and epithelial cell infection assays. The C-terminal amino acids 253-276 of the GTPase binding domain (GBD) of N-WASP were identified as essential, although not sufficient, for TccP:N-WASP protein:protein interaction, TccP-mediated N-WASP activation and induction of actin polymerization. TccP from EHEC O157:H7 strain EDL933 consists of a unique N-terminal domain and six proline-rich repeats. Progressive deletions within the N-terminus of TccP revealed that residues 1-21 are necessary and sufficient for its translocation, while amino acids 1-181, encompassing the N-terminal translocation signal and two proline-rich repeats, are sufficient for triggering actin polymerization in EHEC-infected epithelial cells and in in vitro actin polymerization assays. This study defines the modular domain structure of TccP and the molecular basis of TccP-mediated N-WASP activation and EHEC-induced remodelling of the host actin cytoskeleton.

Actins↗

PubMed2005

Abi1 regulates the activity of N-WASP and WAVE in distinct actin-based processes.

Neural Wiskott-Aldrich syndrome protein (N-WASP) and WAVE are members of a family of proteins that use the Arp2/3 complex to stimulate actin assembly in actin-based motile processes. By entering into distinct macromolecular complexes, they act as convergent nodes of different signalling pathways. The role of WAVE in generating lamellipodial protrusion during cell migration is well established. Conversely, the precise cellular functions of N-WASP have remained elusive. Here, we report that Abi1, an essential component of the WAVE protein complex, also has a critical role in regulating N-WASP-dependent function. Consistently, Abi1 binds to N-WASP with nanomolar affinity and, cooperating with Cdc42, potently induces N-WASP activity in vitro. Molecular genetic approaches demonstrate that Abi1 and WAVE, but not N-WASP, are essential for Rac-dependent membrane protrusion and macropinocytosis. Conversely, Abi1 and N-WASP, but not WAVE, regulate actin-based vesicular transport, epidermal growth factor receptor (EGFR) endocytosis, and EGFR and transferrin receptor (TfR) cell-surface distribution. Thus, Abi1 is a dual regulator of WAVE and N-WASP activities in specific processes that are dependent on actin dynamics.

Actins↗

PubMed2004

Eps8 controls actin-based motility by capping the barbed ends of actin filaments.

Actin filament barbed-end capping proteins are essential for cell motility, as they regulate the growth of actin filaments to generate propulsive force. One family of capping proteins, whose prototype is gelsolin, shares modular architecture, mechanism of action, and regulation through signalling-dependent mechanisms, such as Ca(2+) or phosphatidylinositol-4,5-phosphate binding. Here we show that proteins of another family, the Eps8 family, also show barbed-end capping activity, which resides in their conserved carboxy-terminal effector domain. The isolated effector domain of Eps8 caps barbed ends with an affinity in the nanomolar range. Conversely, full-length Eps8 is auto-inhibited in vitro, and interaction with the Abi1 protein relieves this inhibition. In vivo, Eps8 is recruited to actin dynamic sites, and its removal impairs actin-based propulsion. Eps8-family proteins do not show any similarity to gelsolin-like proteins. Thus, our results identify a new family of actin cappers, and unveil novel modalities of regulation of capping through protein-protein interactions. One established function of the Eps8-Abi1 complex is to participate in the activation of the small GTPase Rac, suggesting a multifaceted role for this complex in actin dynamics, possibly through the participation in alternative larger complexes.

Actin Cytoskeleton↗

PubMed2004

Formin is a processive motor that requires profilin to accelerate actin assembly and associated ATP hydrolysis.

Motile and morphogenetic cellular processes are driven by site-directed assembly of actin filaments. Formins, proteins characterized by formin homology domains FH1 and FH2, are initiators of actin assembly. How formins simply bind to filament barbed ends in rapid equilibrium or find free energy to become a processive motor of filament assembly remains enigmatic. Here we demonstrate that the FH1-FH2 domain accelerates hydrolysis of ATP coupled to profilin-actin polymerization and uses the derived free energy for processive polymerization, increasing 15-fold the rate constant for profilin-actin association to barbed ends. Profilin is required for and takes part in the processive function. Single filaments grow at least 10 microm long from formin bound beads without detaching. Transitory formin-associated processes are generated by poisoning of the processive cycle by barbed-end capping proteins. We successfully reconstitute formin-induced motility in vitro, demonstrating that this mechanism accounts for the puzzlingly rapid formin-induced actin processes observed in vivo.

Actins↗

PubMed2004

The beta-thymosin/WH2 domain; structural basis for the switch from inhibition to promotion of actin assembly.

The widespread beta-thymosin/WH2 actin binding domain has versatile regulatory properties in actin dynamics and motility. beta-thymosins (isolated WH2 domain) maintain monomeric actin in a "sequestered" nonpolymerizable form. In contrast, when repeated in tandem or inserted in modular proteins, the beta-thymosin/WH2 domain promotes actin assembly at filament barbed ends, like profilin. The structural basis for these opposite functions is addressed using ciboulot, a three beta-thymosin repeat protein. Only the first repeat binds actin and possesses the function of ciboulot. The region that shows the strongest interaction with actin is an amphipathic N-terminal alpha helix, present in all beta-thymosin/WH2 domains, which recognizes the ATP bound actin structure and uses the shear motion of actin linked to ATP hydrolysis to control polymerization. Crystallographic ((1)H, (15)N), NMR, and mutagenetic data reveal that the weaker interaction of the C-terminal region of beta-thymosin/WH2 domain with actin accounts for the switch in function from inhibition to promotion of actin assembly.

Actins↗

PubMed2003

How VASP enhances actin-based motility.

The function of vasodilator-stimulated phosphoprotein (VASP) in motility is analyzed using a biomimetic motility assay in which ActA-coated microspheres propel themselves in a medium containing actin, the Arp2/3 complex, and three regulatory proteins in the absence or presence of VASP. Propulsion is linked to cycles of filament barbed end attachment-branching-detachment-growth in which the ActA-activated Arp2/3 complex incorporates at the junctions of branched filaments. VASP increases the velocity of beads. VASP increases branch spacing of filaments in the actin tail, as it does in lamellipodia in living cells. The effect of VASP on branch spacing of Arp2/3-induced branched actin arrays is opposed to the effect of capping proteins. However, VASP does not compete with capping proteins for binding barbed ends of actin filaments. VASP enhances branched actin polymerization only when ActA is immobilized on beads or on Listeria. VASP increases the rate of dissociation of the branch junction from immobilized ActA, which is the rate-limiting step in the catalytic cycle of site-directed filament branching.

Actin Depolymerizing Factors↗

PubMed2003

A biomimetic motility assay provides insight into the mechanism of actin-based motility.

Abiomimetic motility assay is used to analyze the mechanism of force production by site-directed polymerization of actin. Polystyrene microspheres, functionalized in a controlled fashion by the N-WASP protein, the ubiquitous activator of Arp2/3 complex, undergo actin-based propulsion in a medium that consists of five pure proteins. We have analyzed the dependence of velocity on N-WASP surface density, on the concentration of capping protein, and on external force. Movement was not slowed down by increasing the diameter of the beads (0.2 to 3 microm) nor by increasing the viscosity of the medium by 10(5)-fold. This important result shows that forces due to actin polymerization are balanced by internal forces due to transient attachment of filament ends at the surface. These forces are greater than the viscous drag. Using Alexa488-labeled Arp2/3, we show that Arp2/3 is incorporated in the actin tail like G-actin by barbed end branching of filaments at the bead surface, not by side branching, and that filaments are more densely branched upon increasing gelsolin concentration. These data support models in which the rates of filament branching and capping control velocity, and autocatalytic branching of filament ends, rather than filament nucleation, occurs at the particle surface.

Actin Cytoskeleton↗

PubMed2002

Control of actin dynamics by proteins made of beta-thymosin repeats: the actobindin family.

Actobindin is an actin-binding protein from amoeba, which consists of two beta-thymosin repeats and has been shown to inhibit actin polymerization by sequestering G-actin and by stabilizing actin dimers. Here we show that actobindin has the same biochemical properties as the Drosophila or Caenorhabditis elegans homologous protein that consists of three beta-thymosin repeats. These proteins define a new family of actin-binding proteins. They bind G-actin in a 1:1 complex with thermodynamic and kinetic parameters similar to beta-thymosins. Like beta-thymosins, they slow down nucleotide exchange on G-actin and make a ternary complex with G-actin and Latrunculin A. On the other hand, they behave as functional homologs of profilin because their complex with MgATP-G-actin, unlike beta-thymosin-actin, participates in filament barbed end growth, like profilin-actin complex. Therefore these proteins play an active role in actin-based motility processes. In addition, proteins of the actobindin family interact with the pointed end of actin filaments and inhibit pointed end growth, maybe via the interaction of the beta-thymosin repeats with two terminal subunits.

Actins↗