PubMed Health⌕ Search

Biomedical subjects

Donald T Haynie

Publications and source records attributed to Donald T Haynie.

At least 19 recordsLinked to original sources
PubMed2007

Polypeptide multilayer nanofilm artificial red blood cells.

Reliable encapsulation of hemoglobin (Hb) within polypeptide multilayer nanofilms has been achieved by a template-based approach, and protein functionality has been demonstrated postencapsulation. The method is general in scope and could be useful for many other encapsulants. Met-Hb was adsorbed onto 5 microm-diameter CaCO3 microparticles, and the Hb-coated particles were encapsulated within a multilayer nanofilm of poly(L-glutamic acid) (PLGA) and poly(L-lysine) (PLL) by layer-by-layer assembly. The CaCO3 templates were then dissolved within the PLGA/PLL nanofilms by addition of ethylenediaminetetraacetic acid. Encapsulation of Hb was proved by fluorescence microscopy, the pH-dependence of retention of Hb was determined by visible wavelength absorbance, and conversion of the encapsulated met-Hb to deoxy-Hb and oxy-Hb was demonstrated by spectroscopic analysis of the Soret absorption peak under various conditions. It thus has been shown that control of Hb oxygenation within polypeptide multilayer nanofilm artificial cells is possible, and that Hb thus encapsulated can bind, release, and subsequently rebind molecular oxygen. This work therefore represents an advance in the development of polypeptide multilayer film artificial red blood cells.

Animals↗
PubMed2006

A molecular dynamics study of the physical basis of stability of polypeptide multilayer nanofilms.

Electrostatic layer-by-layer assembly (LBL) is a versatile method of fabricating ultrathin multilayer films, coatings, and microcapsules from materials in solution, notably, oppositely charged polyelectrolytes in water. Polypeptides, a special type of polyelectrolyte, have recently shown promise for a range of applications in biotechnology and medicine, for example, artificial cells, drug delivery systems, cell/tissue scaffolds, artificial viruses, and implantable device coatings. Poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) at neutral pH are model oppositely charged polypeptides. Experimental studies have shown that PLL/PLGA multilayer films contain a substantial amount of beta-sheets. Here, we present findings of a molecular dynamics (MD) study of the physical basis of interaction between PLL and PLGA in multilayer film models. Simulations have been carried out to study structural and dynamical properties of PLL/PLGA aggregates in beta-sheet conformation. The results suggest that hydrophobic interactions, in addition to electrostatics interactions, play a significant role in PLL/PLGA multilayers. The preferred orientation of peptides in the beta-sheet structures is antiparallel within sheets and parallel between sheets. Intersheet hydrogen-bond formation is more likely the result of peptide association than the cause. The approach provides a general means to understand better how various types of noncovalent interactions contribute to the structure and stability of polypeptide multilayer films.

Chemical Phenomena↗
PubMed2006

Direct determination of the thermodynamics of polyelectrolyte complexation and implications thereof for electrostatic layer-by-layer assembly of multilayer films.

Interpolyelectrolyte complex (IPEC) formation between poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) has been studied over a range of ionic strengths by isothermal titration calorimetry (ITC), turbidity titration, and electrostatic layer-by-layer assembly (ELBL). The results indicate that IPEC formation of PSS/PAH in aqueous solution is predominantly entropy-driven. The thermodynamic parameters suggest the formation of different types of complexes and aggregates due to salt-induced conformational changes in the polyelectrolyte conformation. Differences in polyelectrolyte behavior in the different salt-concentration regimes are described in terms of changes in the Debye screening length of the polyelectrolytes. The relationship of the results to the effect of salt concentration on the assembly of polyelectrolyte multilayer films (PEMs) is discussed.

Calorimetry, Differential Scanning↗
PubMed2006

Effect of electromagnetic nanopulses on C. elegans fertility.

Electromagnetic nanopulse exposure results in decreased fertility of C. elegans, a well studied, multicellar organism. Experiments indicate that this effect is unlikely to be due to heating. Instead, nanopulses interfere with fertilization or development by an as yet undetermined mechanism. Study of nanopulse exposure of C. elegans could help to understand more generally how living organisms interact with electromagnetic fields.

Animals↗
PubMed2006

Physics of polypeptide multilayer films.

Polypeptide multilayer films are promising for the development of coatings for implant devices, biosensors, and artificial cells. This paper discusses aspects of the physics of these films. Three sub-topics in the physics of peptide adsorption in multilayer film assembly covered here are peptide structure at the film/solid support interface, adsorbed layer thickness, and dynamics of peptide adsorption. A synopsis of work in these areas is preceded by an introduction to the subject and a review of some aspects of polymer theory.

Adsorption↗
PubMed2006

Quantal self-assembly of polymer layers in polypeptide multilayer nanofilms.

Simple molecular models predict key aspects of the "microscopic" assembly behavior of various peptide systems in the fabrication of multilayer films. Such films show substantial differences in density for different peptide systems. The data suggest that exponential film growth is possible in the absence of polymer diffusion and that "macroscopic" assembly behavior is more a function of peptide-peptide interactions than peptide sequence alone.

Circular Dichroism↗
PubMed2006

Straightforward and effective protein encapsulation in polypeptide-based artificial cells.

A simple and straightforward approach to encapsulating an enzyme and preserving its function in polypeptide-based artificial cells is demonstrated. A model enzyme, glucose oxidase (GOx), was encapsulated by repeated stepwise adsorption of poly(L-lysine) and poly(L-glutamic acid) onto GOx-coated CaCO3 templates. These polypeptides are known from previous research to exhibit nanometer-scale organization in multilayer films. Templates were dissolved by ethylenediaminetetraacetic acid (EDTA) at neutral pH. Addition of polyethylene glycol (PEG) to the polypeptide assembly solutions greatly increased enzyme retention on the templates, resulting in high-capacity, high-activity loading of the enzyme into artificial cells. Assay of enzyme activity showed that over 80 mg-mL(-1) GOx was retained in artificial cells after polypeptide multilayer film formation and template dissolution in the presence of PEG, but only one-fifth as much was retained in the absence of PEG. Encapsulation is a means of improving the availability of therapeutic macromolecules in biomedicine. This work therefore represents a means of developing polypeptide-based artificial cells for use as therapeutic biomacromolecule delivery vehicles.

Calcium Carbonate↗
PubMed2006

Antimicrobial polypeptide multilayer nanocoatings.

A multilayer coating (or film) of nanometer-thick layers can be made by sequential adsorption of oppositely charged polyelectrolytes on a solid support. The method is known as layer-by-layer assembly (LBL). No special apparatus is required for LBL and nanofilms can be prepared under mild, physiological conditions. A multilayer nanofilm in which at least one of the constituent species is a polypeptide is a polypeptide multilayer nanofilm. The present work was aimed at assessing whether polypeptide multilayer nanofilms with specific antimicrobial properties could be prepared by incorporation of a known antimicrobial agent in the film structure, in this case the edible protein hen egg white lysozyme (HEWL). The chicken enzyme is widely employed as a human food preservative. An advantage of LBL in this context is that the nanofilm is fabricated directly on the surface of interest, eliminating the need to incorporate the antimicrobial in other packaging materials. Here, nanofilms were made of poly(L-glutamic acid) (PLGA), which is highly negatively charged in the mildly acidic pH range, and HEWL, which has a high net positive charge at acidic pH. We show that PLGA/HEWL nanofilms inhibit growth of the model microbe Microccocus luteus in the surrounding liquid medium. The amount of HEWL released from PLGA/HEWL films depends on the number of HEWL layers and therefore on the total quantity of HEWL in the films. This initial study provides a sketch of the scope for further development of LBL in the area of antimicrobial polypeptide multilayer films. Potential applications of such films include strategies for food preservation and coatings for implant devices.

Anti-Bacterial Agents↗
PubMed2005

Perturbation of nanoscale structure of polypeptide multilayer thin films.

Multilayer thin films formed by sequential deposition of oppositely charged polypeptides on a charged surface are known from previous studies to comprise a mixture of types of secondary structure. Here, study of the perturbation of polypeptide film structure by deposition of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate) (PSS) on the film surface has revealed differences in behavior attributable to physical properties of the peptides. The methods of analysis were circular dichroism spectroscopy (CD), ultraviolet spectroscopy (UVS), and quartz crystal microbalance (QCM). Films made of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) with an average charge per monomer of about 1 were substantially more susceptible to perturbation of structure than films made of designed polypeptides with an average charge per monomer of about 0.5, despite preparation under identical conditions. PLL-PLGA films showed loss or gain of material and change in secondary structure content on perturbation, whether made of high molecular mass (ca. 90 kDa) or low molecular mass (ca. 14 kDa) polymers. By contrast, films made of very low molecular mass (ca. 3.5 kDa) designed polypeptides showed little change in secondary structure content. The data suggest that the penetrability of PSS or PAH into a film and therefore film density can depend substantially on the polypeptides of which it is made and the character of intermolecular interactions.

Amino Acid Sequence↗
PubMed2005

FDTD simulation of exposure of biological material to electromagnetic nanopulses.

Ultra-wideband (UWB) electromagnetic pulses of nanosecond duration, or nanopulses, are of considerable interest to the communications industry and are being explored for various applications in biotechnology and medicine. The propagation of a nanopulse through biological matter has been computed using the finite difference-time domain (FDTD) method. The approach required the reparametrization of existing Cole-Cole model-based descriptions of dielectric properties of biological matter in terms of the Debye model without loss of accuracy. Several tissue types have been considered. Results show that the electromagnetic field inside biological tissue depends on incident pulse rise time and width. Rise time dominates pulse behaviour inside tissue as conductivity increases. It has also been found that the amount of energy deposited by 20 kV m(-1) nanopulses is insufficient to change the temperature of the exposed material for pulse repetition rates of 1 MHz or less, consistent with recent experimental results.

Algorithms↗
PubMed2005

Use of the z-transform to investigate nanopulse penetration of biological matter.

Short duration, fast rise time electromagnetic ultra-wideband (UWB) pulses ("nanopulses") are generated by numerous electronic devices. Many new technologies involving nanopulses are under development and expected to become widely available soon. Study of nanopulse bioeffects therefore is needed to ensure human safety and to probe the useful range of nanopulses in possible biomedical and biotechnological applications. In this article, we present a new approximation of the Cole-Cole expression for the frequency dependence of the dielectric properties of tissues. The approximation is based on a z-transformation of the electric displacement and a second-order Taylor approximation of the Cole-Cole expression. The approach has been applied to investigating the penetration of nanopulses into biological matter as a function of the dielectric properties of tissue and pulse width. Solutions to Maxwell's equations are calculated using the finite difference time domain method (FDTD).

Algorithms↗
PubMed2005

Self-assembly of metallic nanowires from aqueous solution.

Conducting nanowires have been found to self-assemble between microelectrodes from palladium acetate solution on applying an alternating electric field of relatively high intensity and frequency. The wires grew spontaneously along the direction of the electric field and have high uniformity and conductivity. The finding challenges current metallic nanowire methodologies and could accelerate achievement of the direct assembly of nanoscale electronic structures and systems.

Journal Article↗
PubMed2005

Design of peptides for thin films, coatings and microcapsules for applications in biotechnology.

A highly-interdisciplinary approach has been developed for minimizing the immunogenicity of films, coatings, microcapsules and other nano-structured materials fabricated from designed polypeptide chains. It is to base the amino-acid sequences on solvent-exposed regions in the folded states of proteins from the same organism. Each such region that meets defined criteria with respect to charge is called a sequence motif. The approach becomes more specifically tailored for intravenous applications by requiring an employed sequence motif to correspond to a known blood protein. An algorithm has been developed to identify sequence motifs in protein-encoding regions of a genome. This work is focused on sequence motifs of charge per unit length >0.5 at neutral pH. It has been found that the number of unique sequence motifs meeting this criterion in available human genome data is maximal for motifs of approx. 7 residues in length. We have designed polypeptides on the basis of computational analysis and shown that they can be used to fabricate nano-structured thin films by electrostatic layer-by-layer assembly (ELBL). The results of this work are discussed with a view to possible applications in biotechnology, notably development of biocompatible coatings and microcapsules.

Amino Acid Motifs↗
PubMed2005

Nanoscale biomimetics: fabrication and optimization of stability of peptide-based thin films.

The method of thin film preparation known as layer-by-layer assembly is of growing interest for current and envisioned developments in bionanotechnology. Here, cysteine-containing 32mer peptides have been designed, synthesized, purified, and used to prepare polypeptide films. A range of methods-quartz crystal microbalance, Fourier transform infrared spectroscopy, circular dichroism spectroscopy, and high-performance liquid chromatography-have been used to probe the effect of ionic strength and polymer secondary structure in solution on peptide self-assembly, and on secondary structure formation and disulfide bond cross-linking in the multilayer film. The amount of designed peptide deposited per adsorption step of film fabrication increased with increasing ionic strength, as with conventional polyelectrolytes. Secondary structure content changed from random coil to beta sheet on incorporation of peptides into a film. "Peptide-inherent" cross-linking by disulfide bond formation increased film stability at acidic pH. Conditions for disulfide stabilization have been optimized. The results contribute to exploration of the physical basis of peptide self-assembly broaden the scope of applications of layer-by-layer assembly, particularly where biocompatibility and stability are key design concerns, and provide a basis for mass production of custom polypeptide thin films of high stability, even in harsh environments.

Amino Acid Sequence↗
PubMed2004

Polypeptide multilayer films: role of molecular structure and charge.

The role of molecular structure, charge, and hydrophobicity in polyelectrolyte layer-by-layer assembly (LbL) of thin films has been studied using the model polypeptides poly-L-glutamatic acid (PLGA) and poly-L-lysine (PLL), quartz crystal microbalance (QCM), and circular dichroism spectroscopy (CD). The adsorption behavior of PLGA and PLL has been compared with the structure of these molecules in aqueous solution under the same conditions. The data show that the deposition of polypeptide per adsorption step scales with average secondary structure content, whether alpha helix or beta sheet. This is contrary to the expectation based on the view that hydrogen bonds are crucial to polypeptide film assembly, because secondary structure formation in a polypeptide reduces its intermolecular hydrogen-bonding potential. The data also show that polypeptide adsorption scales with ionic strength and chain length. Taken together, the results increase knowledge of polypeptide-based LbL thin film fabrication and will help to provide a firmer foundation for the use of natural or designed polypeptides in LbL.

Biopolymers↗