PubMed Health⌕ Search

Biomedical subjects

Dong-Qiang Lin

Publications and source records attributed to Dong-Qiang Lin.

11 recordsLinked to original sources

Zeta potential as a diagnostic tool to evaluate the biomass electrostatic adhesion during ion-exchange expanded bed application.

Expanded bed adsorption is an integrative technology in downstream processing allowing the direct capture of target proteins from biomass (cells or cell debris) containing feedstocks. Potential adhesion of biomass on the surface of adsorbent, however, may hamper the application of this technique. Since the electrostatic forces dominate the interactions between biomass and adsorbent, the concept of zeta potential was introduced to characterize the biomass/adsorbent electrostatic interactions during expanded bed application. The criterion of zeta potential evaluation proposed in the previous paper (Biotechnol Bioeng, 83(2):149-157, 2003) was verified further with the experimental validation. The zeta potential of intact cells and homogenates of four microorganisms (Escherichia coli, Bacillus subtilis, Pichia pastoris, and S. cerevisiae) were measured under varying pH and salt concentration, and two ion-exchange adsorbents (Streamline DEAE and Streamline QXL) were investigated. The biomass transmission index (BTI) from the biomass pulse response experiments was used as the indicator of biomass adhesion in expanded bed. Combining the influences from zeta potential of adsorbent (zeta(a)), zeta potential of biomass (zeta(b)) and biomass size (d), a good relationship was established between the zeta potential parameter (-zeta(a)zeta(b)d) and BTI for all experimental conditions. The threshold value of parameter (-zeta(a)zeta(b)d) can be defined as 120 mV2 microm for BTI above 0.9. This means that the systems with (-zeta(a)zeta(b)d) < 120 show neglectable electrostatic bio-adhesion, and would have a considerable probability of forming stable expanded beds in a biomass suspension under the particular experimental conditions.

Adsorption↗

The influence of homogenisation conditions on biomass-adsorbent interactions during ion-exchange expanded bed adsorption.

Expanded bed adsorption (EBA) is an integrative step in downstream processing allowing the direct capture of target proteins from cell-containing feedstocks. Extensive co-adsorption of biomass, however, may hamper the application of this technique. The latter is especially observed at anion exchange processes as cells or cell debris are negatively charged under common anion exchange conditions. The restrictions observed under these conditions are, however, directly related to processing steps prior to fluidised bed application. In this study, it could be shown that the effective surface charge of cell debris obtained during homogenisation is closely related to the debris size and thus to the homogenisation method and conditions. The amount and thus effect of cells binding to the adsorbent could be significantly decreased when optimising the homogenisation step not only towards optimal product release but towards a reduction of debris size and charge. The lower size and charge of the debris results not only in a reduced retention probability but also, in a lower collision probability between debris and adsorbent. The applicability was shown in an example where the homogenisation conditions of E. coli were optimised towards EBA applications. In a previous report (Reichert et al., 2001) studying the suitability of EBA for the capture of formate dehydrogenate from E. coli homogenate the pseudo affinity resin Streamline Red was identified as the only suitable adsorbent. The new approach, however, led to a system where anion exchange as capture step became possible, however, to the cost of binding capacity.

Adsorption↗

On-column refolding of recombinant human interferon-gamma inclusion bodies by expanded bed adsorption chromatography.

A refolding strategy was described for on-column refolding of recombinant human interferon-gamma (rhIFN-gamma) inclusion bodies by expanded bed adsorption (EBA) chromatography. After the denatured rhIFN-gamma protein bound onto the cation exchanger of STREAMLINE SP, the refolding process was performed in expanded bed by gradually decreasing the concentration of urea in the buffer and the refolded rhIFN-gamma protein was recovered by the elution in packed bed mode. It was demonstrated that the denatured rhIFN-gamma protein could be efficiently refolded by this method with high yield. Under appropriate experimental conditions, the protein yield and specific activity of rhIFN-gamma was up to 52.7% and 8.18 x 10(6) IU/mg, respectively.

Adsorption↗

Expansion and hydrodynamic properties of cellulose-stainless steel powder composite matrix for expanded bed adsorption.

For better understanding the influences of solid phase properties on the performance of the expanded bed, the expansion and hydrodynamic properties of cellulose-stainless steel powder composite matrix with a series of densities was investigated and analyzed in an expanded bed. Two kinds of matrix particle diameter fractions, the small one (60-125 microm) and the large (125-300 microm), were used in the present work. In general, the expansion factors decreased obviously with the increase of matrix density. A linear relation between the mean density of matrix and superficial velocity at expansion factor of 2.5 was found for same series of matrices. The Richardson-Zaki equation could correlate the bed expansion and operation fluid velocity for all matrices tested. The theoretical prediction of correlation parameters (the terminal settling velocity U(t) and expansion index n) was improved with the modification of equations in the literature. The residence time distributions were investigated to characterize the hydrodynamic property in expanded bed. Compared with three evaluation factors (the height equivalent of theoretical plate, Bo number and axial distribution coefficient D(ax)), the results indicated that D(ax) is the best parameter to analyze the bed stability of expanded bed under various operation conditions and matrix properties. In addition, it was found that fluid velocity is the most essential factor to influence the hydrodynamic properties in the bed. A linear relation between the D(ax) and superficial fluid velocity for all matrices tested was established.

Adsorption↗

Predictive modeling of protein adsorption along the bed height by taking into account the axial nonuniform liquid dispersion and particle classification in expanded beds.

Expanded bed adsorption (EBA) is a special chromatography technique with perfect classification of adsorbent particles in the column, thus the performance of protein adsorption in expanded beds is particular, obviously nonuniform and complex along the column. Detailed description of the complex adsorption kinetics of proteins in expanded bed is essential for better analyzing of adsorptive mechanisms, the design of chromatographic processes and the optimization of operation parameters of EBA processes. In this work, a theoretical model for the prediction of protein adsorption kinetics in expanded beds was developed by taking into account the classified distribution of adsorbent particles along the bed height, the nonuniform behaviors of axial liquid dispersion, the axial variation of local bed voidage as well as the axial changes of target component mass transfer. The model was solved using the implicit finite difference scheme combining with the orthogonal collocation method, and then applied to predict the breakthrough behaviors of bovine serum albumin (BSA) on Streamline DEAE and lysozyme on Streamline SP along the bed height in expanded beds under various conditions. In addition, the experiments of front adsorption of BSA on Streamline DEAE at different axial column positions were carried out to reveal the adsorption kinetics of BSA along the bed height in a 20 mm I.D. expanded bed, and the influences of liquid velocity and feed concentration on the breakthrough behaviors were also analyzed. The breakthrough behaviors predicted by the present model were compared with the experimental data obtained in this work and in the literature published. The agreement between the prediction and the experimental breakthrough curves is satisfied.

Adsorption↗

Using a kinetic model that considers cell segregation to optimize hEGF expression in fed-batch cultures of recombinant Escherichia coli.

Growth inhibition of recombinant Escherichia coli during the expression of human epidermal growth factor was observed. The recombinant cells could be segregated into three populations based on their cell division and plasmid maintenance abilities: dividing and plasmid-bearing cells, dividing and plasmid-free cells, and viable-but-non-culturable (VBNC) cells. Fed-batch fermentations were performed to investigate the effect of cell segregation on the kinetics of growth and foreign protein production. The results showed that a low concentration of inducer caused weak induction, whereas high levels cause strong induction, resulting in cells segregating into VBNC bacteria and producing a low foreign protein yield. A kinetic model for cell segregation was proposed and its predictions correlated well with experimental data for cell growth and protein expression. The optimal induction strategy could then be predicted by the model, and this prediction was then verified by experimentally deriving the conditions necessary for maximum expression of recombinant protein.

Epidermal Growth Factor↗

[Immobilization of cells by macro-porous NaCS-PDMDAAC capsules and cultivation in shaking flask and bubble bioreactor].

The membrane of sodium cellulose sulphate ( NaCS)-poly dimethyldiallylammonium chloride (PDMDAAC) microcapsule is compact and has low molecular weight cut-off, which would delay the mass transfer and affect the cell growth immobilized in the capsule. Macroporous NaCS-PDMDAAC microcapsules were prepared using the degradation of the starch by amylase in the membrane of the capsules. The pore size and the permeability in the membrane were improved obviously. As model cells, the Candida krusei CK1 and E. coli EC1 immobilized in the capsules were cultured in the shake flask and bubble column respectively. It was shown that the cell density immobilized in the microcapsules cultured in the bubble column was higher than that cultured in the shaking flask. It implied that the limiting factor of the cell growth in the capsule lied in the diffusion of the oxygen. Since the rate of the oxygen transporting across the membrane was greatly enhanced due to the enlarged pore size, the maximum cell density in the macroporous capsules was 20%-110% over than that in the standard capsules in the bubble column. However, the extent of E. coli cell density increasing was higher than that of the yeast, which may be due to the difference of the oxygen requirement between the two microbes.

Amylases↗

The influence of biomass on the hydrodynamic behavior and stability of expanded beds.

Expanded bed adsorption is an innovative chromatographic technology that allows the introduction of particle-containing feedstock without the risk of blocking the bed. Provided a perfectly classified fluidized bed (termed expanded bed) is formed in the crude feedstock and the biomass is not influencing protein transport towards the adsorbent surface, a sorption performance comparable to packed beds is found. The influence of biomass on the hydrodynamic stability of expanded beds is essential and was investigated systematically in this article. Residence-time distribution analyses were performed using model systems and a yeast suspension under various fluid-phase conditions. It is demonstrated that three factors (biomass/adsorbent interactions, biomass concentration, and flow rate) play an interdependent role disturbing the classified fluidization of an expanded bed. A clear correlation between the degree of aggregative fluidization--obtained by PDE modeling of RTD data--and the expansion behavior of the fluidized bed has been found. Thus, combining three analytical methods, namely cell transmission index analysis, expansion analysis, and RTD analysis provides a solid base for understanding and control of the fluidization behavior and thus further process design during the initial phase of process development.

Algorithms↗

Gelation conditions and transport properties of hollow calcium alginate capsules.

The diameter, membrane thickness, and compression intensity of hollow Ca-alginate capsules were measured at different gelation conditions, such as the reactant concentration, dropping velocity, and gelation time. The optimum operation conditions for preparing capsules were determined at 100 g/L CaCl(2), 10 g/L sodium alginate (Na-alginate), a dropping velocity of 150 droplets/min, and a gelation time of 10 min. Diffusion of some saccharide and amino acid from bulk solution into capsules was investigated, and the diffusion coefficients were calculated by the developed mathematical model. All the tested substances can diffuse easily into the capsules. The combined diffusion coefficients of the capsule D(m) are 92-99% as large as their diffusion coefficients in pure water, while the diffusion coefficients in the capsule membrane D(1) are 60-95% as large as those. By employing polyethylene glycol (PEG) and bovine serum albumin (fraction V) (BSA(V)), the molecular weight cut-off of the capsule was determined. For linear macromolecules, hollow Ca-alginate capsules have a molecular weight cut-off of 4000. No diffusion of BSA(V) into the capsules was observed.

Alginates↗

Biomass/adsorbent electrostatic interactions in expanded bed adsorption: a zeta potential study.

Expanded bed adsorption is an integrated technology that allows the introduction of particle-containing feedstock without the risk of blocking the bed. The biomass particles contained in the feedstock have to be treated as an integral part of the process and potential interactions between suspended biomass and the adsorbent must be excluded during process design. Because the electrostatic forces dominate the interactions between the biomass and adsorbent, the zeta potential has been studied as a tool to characterize biomass/adsorbent electrostatic interactions. The zeta potentials of four types of biomass (yeast intact cells, yeast homogenate, Escherichia coli intact cells, and E. coli homogenate) and two types of ion exchanger were measured systematically at varying process conditions. Using the cell transmission index from biomass pulse-response experiments as a parameter, the relations between zeta potential and the biomass/adsorbent interaction were evaluated. Combining the influences from zeta potential of adsorbent (zeta(a)), zeta potential of biomass (zeta(b)), and biomass size (d), parameter (-zeta(a)zeta(b)d) was found to be an appropriate indicator of the biomass/adsorbent interactions in expanded beds under various liquid-phase conditions for different types of biomass. The threshold value of parameter (-zeta(a)zeta(b)d) can be defined as 120 mV(2) microm for cell transmission of >90%, which means that systems with (-zeta(a)zeta(b)d) < 120 may have a considerable probability of forming stable expanded beds in a biomass suspension under the particular experimental conditions.

Adsorption↗

Stability of expanded beds during the application of crude feedstock.

Expanded bed adsorption is an integrated technology that allows the introduction of a particle containing feedstock without the risk of blocking the bed. Provided a perfectly classified fluidized bed (termed expanded bed) is formed in the crude feed, a sorption performance comparable to packed beds is found. During the application of biomass containing samples to stable expanded beds an increase in bed expansion due to the higher density and viscosity of the feed is encountered. In this article it is investigated whether the expanded bed condition is also fulfilled during the transition in bed expansion from lower to higher density (i.e., from an equilibration buffer to a biomass containing feedstock). Residence time distribution analyses were performed by using model systems and a yeast suspension during this transition phase. It is shown that in systems in which the biomass does not interact with the fluidized stationary phase, the perfectly classified fluidization is maintained also during this transition phase regardless of the type of feedstock. Additional bed expansion takes place in an "ordered" manner without compromising bed stability. In case of biomass/adsorbent interactions, a deterioration in bed stability is found directly when the crude feed is loaded.

Biomass↗