PubMed Health⌕ Search

Biomedical subjects

Dongbin Zhao

Publications and source records attributed to Dongbin Zhao.

16 recordsLinked to original sources
PubMed2006

A supercooled imidazolium iodide ionic liquid as a low-viscosity electrolyte for dye-sensitized solar cells.

A series of allyl-functionalized imidazolium salts are reported, including 1-allyl-3-ethylimidazolium iodide and 1-allyl-3-propylimidazolium iodide, which have melting points close to room temperature and show typical properties of supercooled fluids if heated above their melting points. Their viscosities in the liquid state are considerably lower than the benchmark ionic liquid used in solar cells, viz., 1-propyl-3-methylimidazolium iodide. Electrolytes containing these new liquids provide excellent efficiencies and good stability in dye-sensitized solar cells when subjected to an accelerated-light soaking test at 60 degrees C. The structures of three of the new salts have been established in the solid state by single-crystal X-ray analysis.

Journal Article↗
PubMed2006

Biphasic hydrosilylation in ionic liquids: a process set for industrial implementation.

The biphasic hydrosilylation of 1-hexadecene with siloxane B9800 in a range of ionic liquids is reported. Of the ionic liquids tested, [C(4)py][BF(4)] and [C(4)-3-pic][BF(4)] offer the optimum compromise between activity and catalyst retention. Several platinum precatalysts were screened, of which K(2)PtCl(4) and Pt(PPh(3))(4) were found to give the best performance; the former provides the highest activity, while the latter offers higher stability and recyclability, and depending on the conditions, both can afford either homogeneous or soluble nanoparticle catalysts as the active species. A number of reaction parameters were varied, and the effects of oxygen, water, and chloride impurities on the reaction were studied. In addition, since nanoparticle catalysts were observed, various strategies to stabilize nanoparticles were screened, but none of them resulted in a superior catalytic system.

Journal Article↗
PubMed2006

From dysfunction to bis-function: on the design and applications of functionalised ionic liquids.

Some of the recent developments concerning the synthesis, properties and applications of functionalised ionic liquids are highlighted. Various strategies are presented, including functionalisation of the cation, anion or both cation and anion in the same ionic liquid, leading to what has been termed dual-functionalised ionic liquids. Particular attention is given to the application of functionalised ionic liquids as reaction media, to stabilise nanoparticles/modify surfaces and to generate porous materials.

Journal Article↗
PubMed2006

Influence of ionic liquids bearing functional groups in dye-sensitized solar cells.

Ionic liquids containing the nitrile and vinyl functional groups attached to imidazolium cations combined with various anions, e.g., iodide, bis[(trifluoromethyl)sulfonyl]imide ([TFSI]-), or dicyanamide ([N(CN)2]-), have been prepared and characterized. These ionic liquids have been successfully used as electrolytes for dye-sensitized solar cells based on nanocrystalline TiO2 with the amphiphilic ruthenium sensitizer [ruthenium (4,4'-dicarboxylic acid-2,2'-bipyridine)(4,4'-bis(p-hexyloxystyryl)-2,2'-bipyridine)][NCS]2 (coded K-19). The iodide salt was used in 3-methoxypropionitrile-based electrolytes, and the performances of both types of devices were evaluated on the basis of their photocurrent density-voltage characteristics and dark current measurements, demonstrating that the functional groups do not exert a detrimental effect on the performance. The solid-state structure of the nitrile-functionalized salt [C1C3CN(im)]I has also been established by single-crystal X-ray diffraction, revealing extensive hydrogen bonding between the cation protons and the iodide.

Journal Article↗
PubMed2005

A nearly planar water sheet sandwiched between strontium-imidazolium carboxylate coordination polymers.

The crystal structure of a strontium-imidazolium polymeric material obtained from the reaction of zwitterionic 1,3-bis(carboxymethyl)imidazolium with SrCO(3) (2:1) in water is reported. The compound crystallized in the orthorhombic space group Pcc2 with a = 14.545(3) A, b = 8.514(5) A, c = 8.5619(14) A, V = 1060.2(6) A(3), and Z = 2. The macromolecular structure is constructed from 8-coordinate strontium, which binds to six different imidazolium carboxylate molecules. The two-dimensional polymer is separated by water sheets in which the water molecules form near-planar hexagons.

Carbonates↗
PubMed2005

[Measure for human motion parameters based on model].

Measure for human motion parameters is a main method to generate computer simulation of human motion and to control humanoid robot motion. Recently, extensive researches on this sensing method have been carried out by abroad and domestic researchers. This paper introduces present research status of human motion parameters in order to provide references for scientific research fields of human bionics, humanoid robot, etc.

Computer Simulation↗
PubMed2004

Nitrile-functionalized pyridinium ionic liquids: synthesis, characterization, and their application in carbon-carbon coupling reactions.

A series of relatively low-cost ionic liquids, based on the N-butyronitrile pyridinium cation [C(3)CNpy](+), designed to improve catalyst retention, have been prepared and evaluated in Suzuki and Stille coupling reactions. Depending on the nature of the anion, these salts react with palladium chloride to form [C(3)CNpy](2)[PdCl(4)] when the anion is Cl(-) and complexes of the formula [PdCl(2)(C(3)CNpy)(2)][anion](2) when the anion is PF(6)(-), BF(4)(-), or N(SO(2)CF(3))(2)(-). The solid-state structures of [C(3)CNpy]Cl and [C(3)CNpy](2)[PdCl(4)] have been established by single-crystal X-ray diffraction. The catalytic activity of these palladium complexes following immobilization in both N-butylpyridinium and nitrile-functionalized ionic liquids has been evaluated in Suzuki and Stille coupling reactions. All of the palladium complexes show good catalytic activity, but recycling and reuse is considerably superior in the nitrile-functionalized ionic liquid. Inductive coupled plasma spectroscopy reveals that the presence of the coordinating nitrile moiety in the ionic liquid leads to a significant decrease in palladium leaching relative to simple N-alkylpyridinium ionic liquids. Palladium nanoparticles have been identified as the active catalyst in the Stille reaction and were characterized using transmission electron microscopy.

Journal Article↗
PubMed2004

Brønsted acidic ionic liquids and their zwitterions: synthesis, characterization and pKa determination.

Imidazolium chlorides with one or two carboxylic acid substituent groups, 1-methyl-3-alkylcarboxylic acid imidazolium chloride, [Me[(CH2)nCOOH]im]Cl (n=1, 3), and 1,3-dialkylcarboxylic acid imidazolium chloride, [[(CH2)nCOOH]2im]Cl (n=1, 3), have been synthesized via their corresponding acid esters. Deprotonation of the carboxylic acid functionalized imidazolium chlorides with triethylamine affords the corresponding zwitterions [Me[(CH2)nCOO]im] (n=1, 3) and [[(CH2)nCOOH][(CH2)nCOO]im] (n=1, 3). Subsequent reaction of the zwitterions with strong acids gives the new imidazolium salts [Me[(CH2)nCOOH]im]X (n=1, 3; X=BF4, CF3SO3) and [[(CH2)nCOOH]2im]X (n=1, 3; X=BF4, CF3SO3), which exhibit melting points as low as -61 degrees C. The solid-state structures of two of the carboxylic acid functionalized imidazolium salts have been determined by single-crystal X-ray diffraction analysis. Extensive hydrogen bonding is present between the chloride and the imidazolium, with eight Cl.H interactions below 3 A. The pK(a) values of all the salts, determined by potentiometric titration, lie between 1.33 and 4.59 at 25 degrees C.

Journal Article↗
PubMed2004

Synthesis and characterization of ionic liquids incorporating the nitrile functionality.

A series of imidazolium salts with the nitrile functional group attached to the alkyl side chain, viz. [CnCNmim][X] (where CnCNmim is the 1-alkylnitrile-3-methylimidazolium cation and Cn= (CH2)(n), n = 1-4; X = Cl, PF(6), and BF(4)) and [C3CNdmim][X] (where CnCNdmim is the 1-alkylnitrile-2,3-dimethylimidazolium cation and C(n) = (CH2)(n), n = 3; X = Cl, PF(6), and BF(4)), have been prepared and characterized using spectroscopic methods. The majority of the nitrile-functionalized imidazolium salts can be classed as ionic liquids since they melt below 100 degrees C. Four of the imidazolium salts have been characterized in the solid state using single-crystal X-ray diffraction analysis to reveal an extensive series of hydrogen bonds between H atoms on the cation and the anion. The relationship between the solid-state structure and the melting point is discussed. Key physical properties (density, viscosity, and solubility in common solvents) of the low melting ionic liquid have been determined and are compared with those of the related 1-alkyl-3-methylimidazolium and 1-alkyl-2,3-dimethylimidazolium ionic liquids. It was envisaged that these ionic liquids could act as both solvent and ligand for catalyzed reactions, and this application is demonstrated in hydrogenation reactions, which show that retention of the catalyst in the ionic liquid during product extraction is extremely high.

Journal Article↗
PubMed2002

[Measuring human arm motion parameters based on high-speed camera].

A sensing method based on high-speed camera is proposed to recognize human arm motion in this paper. A sensing system for human arm motion was established. A fast image processing algorithm was developed to accurately extract marker positions in the image. Angle parameter results were further improved with the instantaneous joint center principle. The human motion information results can serve as the research references of medical treatment, gym, bionics, and so on. The sensing method can also be applied to other fields of the human motion recognition.

Algorithms↗