Biomedical subjects

Dongil Lee

Publications and source records attributed to Dongil Lee.

5 recordsLinked to original sources

PubMed2004

Hexanethiolate monolayer protected 38 gold atom cluster.

The nucleation-growth-passivation Brust reaction has been modified so as to enrich the product in useful quantities of a 38-atom gold nanoparticle coated with a hexanethiolate monolayer. Two modifications are described, using -78 degrees C reduction temperature and a hyperexcess of thiol. Compositional evidence is presented that establishes the product as a Au38(C6)24 hexanethiolate monolayer protected cluster (MPC), based on transmission electron microscopy, laser ionization-desorption mass spectrometry, thermogravimetric analysis, and elemental analysis. Reverse phase HPLC confirms the relatively good monodispersity of the MPC products, but high-resolution double-column HPLC reveals that the MPCs are a mixture of closely related but chromatographically distinct products. Voltammetry, low energy spectrophotometry, and spectroelectrochemistry reveal, respectively, a 1.6 eV electrochemical energy gap between the first oxidation and the first reduction, an optical HOMO-LUMO energy absorbance edge at 1.3 eV, and a bleaching of optical absorbance near the 1.3 eV band edge that accompanies electrochemical oxidation of the nanoparticle.

Journal Article↗

PubMed2004

Electrochemistry and optical absorbance and luminescence of molecule-like Au38 nanoparticles.

This paper describes electrochemical and spectroscopic properties of a well-characterized, synthetically accessible, 1.1 nm diam Au nanoparticle, Au(38)(PhC(2)S)(24), where PhC(2)S is phenylethylthiolate. Properties of other Au(38) nanoparticles made by exchanging the monolayer ligands with different thiolate ligands are also described. Voltammetry of the Au(38) nanoparticles in CH(2)Cl(2) reveals a 1.62 V energy gap between the first one-electron oxidation and the first reduction. Based on a charging energy correction of ca. 0.29 V, the indicated HOMO-LUMO gap energy is ca. 1.33 eV. At low energies, the optical absorbance spectrum includes peaks at 675 nm (1.84 eV) and 770 nm (1.61 eV) and an absorbance edge at ca. 1.33 eV that gives an optical HOMO-LUMO gap energy that is consistent with the electrochemical estimate. The absorbance at lowest energy is bleached upon electrochemical depletion of the HOMO level. The complete voltammetry contains two separated doublets of oxidation waves, indicating two distinct molecular orbitals, and two reduction steps. The ligand-exchanged nanoparticle Au(38)(PEG(135)S)(13)(PhC(2)S)(11), where PEG(135)S is -SCH(2)CH(2)OCH(2)CH(2)OCH(3), exhibits a broad (1.77-0.89 eV) near-IR photoluminescence band resolvable into maxima at 902 nm (1.38 eV) and 1025 nm (1.2 eV). Much of the photoluminescence occurs at energies less than the HOMO-LUMO gap energy. A working model of the energy level structure of the Au(38) nanoparticle is presented.

Journal Article↗

PubMed2003

Voltammetry and electron-transfer dynamics in a molecular melt of a 1.2 nm metal quantum dot.

New molecular melts of nanoparticles have been obtained by place exchanging thiolated poly(ethyleneglycol, MW = 350) ligands into the monolayer shells of the quantum dot nanoparticle Au38(phenylethylthiolate)24. These melts are nearly monodisperse in monolayer protected Au clusters with core diameters of approximately 1.2 nm. LiClO4 electrolyte can be dissolved in the melt via the PEG component of the protecting monolayer, producing an ionically conductive nanophase and enabling voltammetry of the undiluted, semisolid nanoparticle molecular melt. The optical and electrochemical charging properties of the small nanoparticles have molecule-like characteristics (as opposed to quantized double layer charging) both in dilute fluid-solvent solutions and as undiluted melts. Potential step chronoamperometry shows that electronic charge is transported through the melt by diffusion-like core-core electron hopping reactions with a rate constant of 2 x 104 s-1.

Journal Article↗

PubMed2003

Ion atmosphere relaxation control of electron transfer dynamics in a plasticized carbon dioxide redox polyether melt.

The sorption of CO(2) into the highly viscous, semisolid hybrid redox polyether melt, [Co(phenanthroline)(3)](MePEG-SO(3))(2), where MePEG-SO(3) is a MW 350 polyether-tailed sulfonate anion, remarkably accelerates charge transport in this molten salt material. Electrochemical measurements show that as CO(2) pressure is increased from 0 to 800 psi (54 atm) at 23 degrees C, the physical diffusion coefficient D(PHYS) of the Co(II) species, the rate constant k(EX) for Co(II/I) electron self-exchange, and the physical diffusion coefficient of the counterion D(COUNTERION) all increase, from 4.3 x 10(-10) to 6.4 x 10(-9) cm(2)/s, 4.1 x 10(6) to 1.6 x 10(7) M(-1) s(-1), and 3.3 x 10(-9) to 1.6 x 10(-8) cm(2)/s, respectively. Plots of log(k(EX)) versus log(D(PHYS)) and of log(k(EX)) versus log(D(COUNTERION)) are linear, showing that electron self-exchange rate constants are closely associated with processes that also govern D(PHYS) and D(COUNTERION). Slopes of the plots are 0.68 and 0.98, respectively, indicating a better linear correlation between k(EX) and D(COUNTERION). The evidence indicates that k(EX) can be controlled by relaxation of the counterion atmosphere about the Co complexes in the semisolid redox polyether melts. Because the counterion relaxation is in turn controlled by polyether "solvent" fluctuations, this is a new form of solvent dynamics control of electron transfer.

Journal Article↗

PubMed2002

Electron and mass transport in hybrid redox polyether melts contacted with carbon dioxide.

Films of neat metal salts with covalently attached oligoether side chains ([Co(bpy(CO(2)MePEG-350)(2))(3)](ClO(4))(2); bpy is 2,2'-bipyridine, and MePEG-350 is methyl-terminated oligomeric ethylene oxide with an average molecular weight of 350 Da) undergo marked changes in physical and electrochemical properties upon contact with CO(2). Electrochemical measurements indicate that the physical diffusion coefficient (D(PHYS)) of the Co(II) species, the observed rate constant for Co(II/I) self-exchange (k(EX)), and the physical diffusion coefficient of the perchlorate counterion (D(ClO4)) increase from 2.4 x 10(-11) to 7.0 x 10(-10) cm(2)/s, 6.8 x 10(5) to 4.5 x 10(6) M(-1) s(-1), and 3.4 x 10(-10) to 4.3 x 10(-9) cm(2)/s, respectively, as CO(2) pressure is increased from 0 to 2000 psi at 23 degrees C. A reduction in activation energy accompanies the enhancement of each of these properties over this pressure range. Increasing CO(2) pressure from ambient to 1000 psi causes the films to swell 13%, and free-volume theory explains the enhanced mass transport properties of the films. The origin of increases in electron-transfer kinetics is considered. Plots of log(k(EX)) versus log(D(PHYS)) and log(k(EX)) versus log(D(ClO4)) are both linear. This suggests that electron self-exchange is controlled by factors that also affect log(D(PHYS)) or log(D(ClO4)). One explanation is based on plasticization of the oligoether side-chain motions by CO(2) that affect ether dipole repolarization and Co complex diffusion rates. A second explanation for the changes in k(EX) is based on control of electron transfer by relaxation of counterions neighbor to the Co complexes, which is measured by D(ClO4). Both explanations represent a kind of solvent dynamics control of k(EX).

Journal Article↗