Biomedical subjects

Douglas G Kilburn

Publications and source records attributed to Douglas G Kilburn.

14 recordsLinked to original sources

PubMed2005

N-Glycosidase-carbohydrate-binding module fusion proteins as immobilized enzymes for protein deglycosylation.

A carbohydrate-binding module (CBM) was fused to the N-termini of mannosyl-glycoprotein endo-beta-N-acetylglucosaminidase (EndoF1) and peptide N-glycosidase F (PNGaseF), two glycosidases from Chryseobacterium meningosepticum that are used to remove N-linked glycans from glycoproteins. The fusion proteins CBM-EndoF1 and CBM-PNGaseF also carry a hexahistidine tag for purification by immobilized metal affinity chromatography after production by Escherichia coli. CBM-EndoF1 is as effective as native EndoF1 at deglycosylating RNaseB; the glycans released by both enzymes are identical. Like native PNGaseF, CBM-PNGaseF is active on denatured but not on native RNaseB. Both fusion proteins are as active on RNaseB when immobilized on cellulose as they are in solution. They retain activity in the immobilized state for at least 1 month at 4 degrees C. The hexahistidine tag can be removed with thrombin, leaving the CBM as the only affinity tag. The CBM can be removed with factor Xa if required.

Chromatography, Affinity↗

PubMed2005

Dynamic localization and persistent stimulation of factor-dependent cells by a stem cell factor / cellulose binding domain fusion protein.

The extracellular matrix provides structural components that support the development of tissue morphology and the distribution of growth factors that modulate the overall cellular response to those growth factors. The ability to manipulate the presentation of factors in culture systems should provide an additional degree of control in regulating the stimulation of factor-dependent cells for tissue engineering applications. Cellulose binding domain (CBD) fusion protein technology facilitates the binding of bioactive cytokines to cellulose materials, and has permitted the analysis of several aspects of cell stimulation by surface-localized growth factors. We previously reported the synthesis and initial characterization of a fusion protein comprised of a CBD and murine stem cell factor (SCF) (Doheny et al. [1999] Biochem J 339:429-434). A significant advantage of the CBD fusion protein system is that it permits the stimulation of factor-dependent cells with localized growth factor, essentially free of nonfactor-derived interactions between the cell and matrix. In this work, the long-term stability and bioactivity of SCF-CBD fusions adsorbed to microcrystalline cellulose under cell culture conditions is demonstrated. Cellulose-bound SCF-CBD is shown to stimulate receptor polarization in the cell membrane and adherence to the cellulose matrix. In addition, cellulose-surface presentation of the SCF-CBD attenuates c-kit dephosphorylation kinetics, potentially modulating the overall response of the cell to the SCF signal.

Animals↗

PubMed2004

Inexpensive one-step purification of polypeptides expressed in Escherichia coli as fusions with the family 9 carbohydrate-binding module of xylanase 10A from T. maritima.

A novel inexpensive affinity purification technology is described based on recombinant expression in Escherichia coli of the polypeptide or protein target fused through its N-terminus to TmXyn10ACBM9-2 (CBM9), the C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima. Measured association constants (K(a)) for adsorption of CBM9 to insoluble allomorphs of cellulose are between 2 x 10(5) and 8 x 10(6) M(-1). CBM9 also binds a range of soluble sugars, including glucose. As a result, a 1M glucose solution is effective in eluting CBM9 and CBM9-tagged fusion proteins from a very inexpensive commercially-available cellulose-based capture column. A processing site is encoded at the C-terminus of the tag to facilitate its rapid and quantitative removal by Factor X(a) to recover the desired target protein sequence following affinity purification. Fusion of the CBM9 affinity tag to the N-terminus of green fluorescent protein (GFP) from the jellyfish, Aquorin victoria, is shown to yield >200 mgl(-1) of expressed soluble fusion protein that can be affinity separated from clarified cell lysate to a purity of >95% at a yield of 86%.

Base Sequence↗

PubMed2003

Structure and ligand binding of carbohydrate-binding module CsCBM6-3 reveals similarities with fucose-specific lectins and "galactose-binding" domains.

Carbohydrate-binding polypeptides, including carbohydrate-binding modules (CBMs) from polysaccharidases, and lectins, are widespread in nature. Whilst CBMs are classically considered distinct from lectins, in that they are found appended to polysaccharide-degrading enzymes, this distinction is blurring. The crystal structure of CsCBM6-3, a "sequence-family 6" CBM in a xylanase from Clostridium stercorarium, at 2.3 A reveals a similar, all beta-sheet fold to that from MvX56, a module found in a family 33 glycoside hydrolase sialidase from Micromonospora viridifaciens, and the lectin AAA from Anguilla anguilla. Sequence analysis leads to the classification of MvX56 and AAA into a family distinct from that containing CsCBM6-3. Whilst these polypeptides are similar in structure they have quite different carbohydrate-binding specificities. AAA is known to bind fucose; CsCBM6-3 binds cellulose, xylan and other beta-glucans. Here we demonstrate that MvX56 binds galactose, lactose and sialic acid. Crystal structures of CsCBM6-3 in complex with xylotriose, cellobiose, and laminaribiose, 2.0 A, 1.35 A, and 1.0 A resolution, respectively, reveal that the binding site of CsCBM6-3 resides on the same polypeptide face as for MvX56 and AAA. Subtle differences in the ligand-binding surface give rise to the different specificities and biological activities, further blurring the distinction between classical lectins and CBMs.

Carbohydrates↗

PubMed2003

Effects of methanol concentration on expression levels of recombinant protein in fed-batch cultures of Pichia methanolica.

The methylotrophic yeast Pichia methanolica can be used to express recombinant genes at high levels under the control of the methanol-inducible alcohol oxidase (AUG1) promoter. Methanol concentrations during the induction phase directly affect cellular growth and protein yield. Various methanol concentrations controlled by an on-line monitoring and control system were investigated in mixed glucose/methanol fed-batch cultures of P. methanolica expressing the human transferrin N-lobe protein. The PMAD18 P. methanolica strain utilized is a knock-out for the chromosomal AUG1 gene locus, resulting in a slow methanol utilization phenotype. Maximum growth of 100 g of dry cell weight per liter of culture was observed in cultures grown at 1.0% (v/v) methanol concentration. Maximum recombinant gene expression was observed for cultures controlled at 0.7% (v/v) methanol concentration, resulting in maximum volumetric production of 450 mg of transferrin per liter after 72 h of elapsed fermentation time.

Bioreactors↗

PubMed2003

O-glycosylation of a recombinant carbohydrate-binding module mutant secreted by Pichia pastoris.

Carbohydrate-binding modules (CBMs; previously called cellulose-binding domains) make excellent fusion partners for the immobilization or purification of polypeptides. However, their use in eukaryotic hosts has been limited by glycosylation, which interferes with the ability of the CBM to bind to cellulose. We have engineered the C-terminal carbohydrate-binding module from Cellulomonas fimi xylanase 10A such that it lacks N-glycosylation sites. This variant, called CBM2aNgly-, was produced and secreted by the methylotrophic yeast Pichia pastoris and found to be O-glycosylated. The O-linked glycans were composed entirely of mannose in a ratio of 1 mol of mannose to 4 mol of protein. The overall distribution of mannose on the O-glycosylated CBM mutant ranged from 1 to 9 mannose residues with the oligosaccharide sizes ranging from Man(1) to Man(4). MALDI-TOF (all matrix-assisted-laser-desorption time of flight) mass spectrometry (MS) was used to map the O-glycosylation to three regions of the polypeptide, each region having a maximum of 4 mannose residues attached to each. Glycans chemically released from CBM2aNgly- and analyzed by fluorophore-assisted carbohydrate electrophoresis were found to contain alpha-1,2-, alpha-1,3-, and alpha-1,6-linkages. Significantly, the O-glycosylation did not influence binding, making CBM2aNgly- a suitable fusion partner for polypeptides produced in P. pastoris and other eukaryotic hosts.

Amino Acid Sequence↗

PubMed2002

Recognition and hydrolysis of noncrystalline cellulose.

Cellulase Cel5A from alkalophilic Bacillus sp. 1139 contains a family 17 carbohydrate-binding module (BspCBM17) and a family 28 CBM (BspCBM28) in tandem. The two modules have significantly similar amino acid sequences, but amino acid residues essential for binding are not conserved. BspCBM28 was obtained as a discrete polypeptide by engineering the cel5A gene. BspCBM17 could not be obtained as a discrete polypeptide, so a family 17 CBM from endoglucanase Cel5A of Clostridium cellulovorans, CcCBM17, was used to compare the binding characteristics of the two families of CBM. Both CcCBM17 and BspCBM28 recognized two classes of binding sites on amorphous cellulose: a high affinity site (K(a) approximately 1 x 10(6) M(-1)) and a low affinity site (K(a) approximately 2 x 10(4) M(-1)). They did not compete for binding to the high affinity sites, suggesting that they bound at different sites on the cellulose. A polypeptide, BspCBM17/CBM28, comprising the tandem CBMs from Cel5A, bound to amorphous cellulose with a significantly higher affinity than the sum of the affinities of CcCBM17 and BspCBM28, indicating cooperativity between the linked CBMs. Cel5A mutants were constructed that were defective in one or both of the CBMs. The mutants differed from the wild-type enzyme in the amounts and sizes of the soluble products produced from amorphous cellulose. This suggests that either the CBMs can modify the action of the catalytic module of Cel5A or that they target the enzyme to areas of the cellulose that differ in susceptibility to hydrolysis.

Amino Acid Sequence↗

PubMed2002

Self-activating factor X derivative fused to the C-terminus of a cellulose-binding module: Production and properties.

In this work, a new derivative of FX was engineered. It comprises a cellulose-binding module (CBM) fused to the N-terminus of the truncated light chain (E2FX) of FX and a hexahistidine tag (H6) fused to the C-terminus of the heavy chain. The sequence LTR at the site of cleavage of the activation peptide from the N-terminus of the heavy chain is changed to IEGR to render the derivative self-activating. However, N-linked glycans on the CBM of the derivative blocked its binding to cellulose and those on the activation peptide slowed its activation. Therefore, the sites of N-linked glycosylation on the CBM and on the activation peptide were eliminated by mutation. The final derivative can be produced in good yield by cultured mammalian cells. It is purified easily with Ni(2+)-agarose, it is self-activating, and it can be immobilized on cellulose. When immobilized on a column of cellulose beads, the activated derivative retains approximately 80% of its initial activity after 30 days of continuous hydrolysis of a fusion protein substrate. Under these conditions of operation, the effective substrate:enzyme ratio is >10(4).

Animals↗

PubMed2002

Carbohydrate-binding modules recognize fine substructures of cellulose.

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Binding Sites↗

PubMed2002

Differential oligosaccharide recognition by evolutionarily-related beta-1,4 and beta-1,3 glucan-binding modules.

Enzymes active on complex carbohydrate polymers frequently have modular structures in which a catalytic domain is appended to one or more carbohydrate-binding modules (CBMs). Although CBMs have been classified into a number of families based upon sequence, many closely related CBMs are specific for different polysaccharides. In order to provide a structural rationale for the recognition of different polysaccharides by CBMs displaying a conserved fold, we have studied the thermodynamics of binding and three-dimensional structures of the related family 4 CBMs from Cellulomonas fimi Cel9B and Thermotoga maritima Lam16A in complex with their ligands, beta-1,4 and beta-1,3 linked gluco-oligosaccharides, respectively. These two CBMs use a structurally conserved constellation of aromatic and polar amino acid side-chains that interact with sugars in two of the five binding subsites. Differences in the length and conformation of loops in non-conserved regions create binding-site topographies that complement the known solution conformations of their respective ligands. Thermodynamics interpreted in the light of structural information highlights the differential role of water in the interaction of these CBMs with their respective oligosaccharide ligands.

Actinomycetales↗

PubMed2002

High-resolution crystal structures of the lectin-like xylan binding domain from Streptomyces lividans xylanase 10A with bound substrates reveal a novel mode of xylan binding.

Carbohydrate-binding module (CBM) family 13 includes the "R-type" or "ricin superfamily" beta-trefoil lectins. The C-terminal CBM, CBM13, of xylanase 10A from Streptomyces lividans is a family 13 CBM that is not only structurally similar to the "R-type" lectins but also somewhat functionally similar. The primary function of CBM13 is to bind the polysaccharide xylan, but it retains the ability of the R-type lectins to bind small sugars such as lactose and galactose. The association of CBM13 with xylan appears to involve cooperative and additive participation of three binding pockets in each of the three trefoil domains of CBM13, suggesting a novel mechanism of CBM-xylan interaction. Thus, the interaction of CBM13 with sugars displays considerable plasticity for which we provide a structural rationale. The high-resolution crystal structure of CBM13 was determined by multiple anomalous dispersion from a complex of CBM13 with a brominated ligand. Crystal structures of CBM13 in complex with lactose and xylopentaose revealed two distinct mechanisms of ligand binding. CBM13 has retained its specificity for lactose via Ricin-like binding in all of the three classic trefoil binding pockets. However, CBM13 has the ability to bind either the nonreducing galactosyl moiety or the reducing glucosyl moiety of lactose. The mode of xylopentaose binding suggests adaptive mutations in the trefoil sugar binding scaffold to accommodate internal binding on helical polymers of xylose.

Amino Acid Sequence↗

PubMed2002

Identification and glucan-binding properties of a new carbohydrate-binding module family.

The C-terminal 191-residue module of Cel5A from the alkalophilic Bacillus sp. 1139 comprises a carbohydrate-binding module (CBM) belonging to a previously unidentified family that we have classified as CBM family 28. This example, called CBM28, bound specifically to cello-oligosaccharides and mixed beta-(1,3)(1,4)-glucans (barley beta-glucan) with association constants of approximately (1-4)x10(4) M(-1). Its binding to barley beta-glucan was remarkably insensitive to pH between 7.0 and 10.9, in keeping with its alkalophilic source. CBM28 bound to cellulose having a significant non-crystalline content with an association constant similar to that for its binding to soluble glucans. CBM17 (CBM family 17) and CBM28 modules naturally occur as tandems. The CBM17/CBM28 tandem from Cel5A bound with apparent co-operativity to barley beta-glucan. The association of CBM28 with cello-oligosaccharides was driven enthalpically and marked by the different thermodynamic contribution of three putative binding subsites that accommodate a cellohexaose molecule.

Amino Acid Sequence↗

PubMed2002

Co-operative binding of triplicate carbohydrate-binding modules from a thermophilic xylanase.

Family 6 carbohydrate-binding modules were amplified by polymerase chain reaction (PCR) from Clostridium stercorarium strain NCIB11754 genomic DNA as a triplet. Individually, these modules bound to xylooligosaccharides and cellooligosaccharides with affinities varying from approximately 3 x 10(3) M(-1) to approximately 1 x 10(5) M(-1). Tandem and triplet combinations of these modules bound co-operatively to soluble xylan and insoluble cellulose to give approximately 20- to approximately 40-fold increases in affinity relative to the individual modules. This co-operativity was an avidity effect resulting from the modules within the tandems and triplet interacting simultaneously with proximal binding sites on the polysaccharides. This occurred by both intrachain and interchain interactions. The duplication or triplication of modules appears to be linked to the growth temperature of the organism; co-operativity in these multiplets may compensate for the loss of affinity at higher temperatures.

Base Sequence↗

PubMedDate not supplied

Inexpensive and generic affinity purification of recombinant proteins using a family 2a CBM fusion tag.

The selective binding of the family 2a carbohydrate binding module (CBM2a) of xylanase 10A of the soil bacterium Cellulomonas fimi to a variety of cellulosic substrates is shown to provide a new, cost-effective affinity chromatography system for purification of recombinant protein. Genetic linkage of CBM2a to a target protein, in this case protein A from Staphylococcus aureus, results in a fusion protein that binds strongly to the particulate-cellulose resin Avicel PH101 and retains the biological activity of the fusion partner. Affinity purification of protein A-CBM2a from the supernatant of a recombinant E. coli JM101 culture results in a product purity of greater than 95% and a product concentration factor of 34 +/- 3. Measured column parameters are combined with one-dimensional equations governing continuity and intraparticle diffusion to predict product breakthrough curves with good accuracy over the range of realistic operating conditions. Peak spreading within the column is controlled by intraparticle diffusion for CBM2a and by a combination of film mass transfer and intraparticle diffusion for the larger protein A-CBM2a fusion protein.

Canada↗