PubMed Health⌕ Search

Biomedical subjects

E A Bailey

Publications and source records attributed to E A Bailey.

8 recordsLinked to original sources

The chemistry and biology of aflatoxin B(1): from mutational spectrometry to carcinogenesis.

Dietary exposure to aflatoxin B(1) (AFB(1)) is associated with an increased incidence of hepatocellular carcinoma (HCC), especially in populations in which exposure to hepatitis B virus (HBV) is a common occurrence. Most HCC samples from people living where HBV is prevalent have one striking mutational hotspot: a GC-->TA transversion at the third position of codon 249 of the p53 gene. In this review, the chemical reaction of an electrophilic derivative of aflatoxin with specific DNA sequences is examined, along with the types of mutations caused by AFB(1) and the sequence context dependence of those mutations. An attempt is made to assign the source of these mutations to specific chemical forms of AFB(1)-DNA damage. In addition, epidemiological and experimental data are examined regarding the synergistic effects of AFB(1) and HBV on HCC formation and the predominance of one hotspot GC-->TA transversion in the p53 gene of affected individuals.

Aflatoxin B1↗

Distribution, speciation, and transport of mercury in stream-sediment, stream-water, and fish collected near abandoned mercury mines in southwestern Alaska, USA.

Concentrations of total Hg, Hg (II), and methylmercury were measured in stream-sediment, stream-water, and fish collected downstream from abandoned mercury mines in southwestern Alaska to evaluate environmental effects to surrounding ecosystems. These mines are found in a broad belt covering several tens of thousands of square kilometers, primarily in the Kuskokwim River basin. Mercury ore is dominantly cinnabar (HgS), but elemental mercury (Hg degrees) is present in ore at one mine and near retorts and in streams at several mine sites. Approximately 1400 t of mercury have been produced from the region, which is approximately 99% of all mercury produced from Alaska. These mines are not presently operating because of low prices and low demand for mercury. Stream-sediment samples collected downstream from the mines contain as much as 5500 microg/g Hg. Such high Hg concentrations are related to the abundance of cinnabar, which is highly resistant to physical and chemical weathering, and is visible in streams below mine sites. Although total Hg concentrations in the stream-sediment samples collected near mines are high, Hg speciation data indicate that concentrations of Hg (II) are generally less than 5%, and methylmercury concentrations are less than 1% of the total Hg. Stream waters below the mines are neutral to slightly alkaline (pH 6.8-8.4), which is a result of the insolubility of cinnabar and the lack of acid-generating minerals such as pyrite in the deposits. Unfiltered stream-water samples collected below the mines generally contain 500-2500 ng/l Hg; whereas, corresponding stream-water samples filtered through a 0.45-microm membrane contain less than 50 ng/l Hg. These stream-water results indicate that most of the Hg transported downstream from the mines is as finely-suspended material rather than dissolved Hg. Mercury speciation data show that concentrations of Hg (II) and methylmercury in stream-water samples are typically less than 22 ng/l, and generally less than 5% of the total Hg. Muscle samples of fish collected downstream from mines contain as much as 620 ng/g Hg (wet wt.), of which 90-100% is methylmercury. Although these Hg concentrations are several times higher than that in fish collected from regional baseline sites, the concentration of Hg in fish is below the 1000 ng/g action level for edible fish established by the US Food and Drug Administration (FDA). Salmon contain less than 100 ng/g Hg, which are among the lowest Hg contents observed for fish in the study, and well below the FDA action level.

Alaska↗

Mercury biogeochemistry in the Idrija river, Slovenia, from above the mine into the Gulf of Trieste.

The Idrija Mine is the second largest Hg mine in the world which operated for 500 years. Mercury (Hg)-laden tailings still line the banks, and the system is a threat to the Idrija River and water bodies downstream including the Soca/Isonzo River and the Gulf of Trieste in the northern Adriatic Sea. A multidisciplinary study was conducted in June 1998 on water samples collected throughout the Idrija and Soca River systems and waters and sediments in the Gulf. Total Hg in the Idrija River increased >20-fold downstream of the mine from <3 to >60 ng liter(-1) with methyl mercury (MeHg) accounting for approximately 0.5%. Concentrations increased again downstream and into the estuary with MeHg accounting for nearly 1.5% of the total. While bacteria upstream of the mine did not contain mercury detoxification genes (mer), such genes were detected in bacteria collected downstream. Benthic macroinvertebrate diversity decreased downstream of the mine. Gulf waters near the river mouth contained up to 65 ng liter(-1) total Hg with approximately 0.05 ng liter(-1) MeHg. Gulf sediments near the river mouth contained 40 microgram g(-1) total Hg with MeHg concentrations of about 3 ng g(-1). Hg in sediment pore waters varied between 1 and 8 ng liter(-1), with MeHg accounting for up to 85%. Hg methylation and MeHg demethylation were active in Gulf sediments with highest activities near the surface. MeHg was degraded by an oxidative pathway with >97% C released from MeHg as CO(2). Hg methylation depth profiles resembled profiles of dissolved MeHg. Hg-laden waters still strongly impact the riverine, estuarine, and marine systems. Macroinvertebrates and bacteria in the Idrija River responded to Hg stress, and high Hg levels persist into the Gulf. Increases in total Hg and MeHg in the estuary demonstrate the remobilization of Hg, presumably as HgS dissolution and recycling. Gulf sediments actively produce MeHg, which enters bottom waters and presumably the marine food chain.

Environmental Monitoring↗

Reduced-order modeling for hyperthermia: an extended balanced-realization-based approach.

Accurate thermal models are needed in hyperthermia cancer treatments for such tasks as actuator and sensor placement design, parameter estimation, and feedback temperature control. The complexity of the human body produces full-order models which are too large for effective execution of these tasks, making use of reduced-order models necessary. However, standard balanced-realization (SBR)-based model reduction techniques require a priori knowledge of the particular placement of actuators and sensors for model reduction. Since placement design is intractable (computationally) on the full-order models, SBR techniques must use ad hoc placements. To alleviate this problem, an extended balanced-realization (EBR)-based model-order reduction approach is presented. The new technique allows model order reduction to be performed over all possible placement designs and does not require ad hoc placement designs. It is shown that models obtained using the EBR method are more robust to intratreatment changes in the placement of the applied power field than those models obtained using the SBR method.

Algorithms↗

A viral genome containing an unstable aflatoxin B1-N7-guanine DNA adduct situated at a unique site.

A problem that has hindered the study of the biological properties of certain DNA adducts, such as those that form at the N7 atoms of purines, is their extreme chemical lability. Conditions are described for the construction of a single-stranded genome containing the chemically and thermally labile 8,9-dihydro-8- (N7-guanyl)-9-hydroxyaflatoxin B1 (AFB1-N7-Gua) adduct, the major DNA adduct of the potent liver carcinogen aflatoxin B1 (AFB1). A 13mer oligonucleotide, d(CCTCTTCGAACTC), was allowed to react with the exo-8,9-epoxide of AFB1 to form an oligonucleotide containing a single AFB1-N7-Gua (at the underlined guanine). This modified 13mer was 5'-phosphorylated and ligated into a gap in an M13 bacteriophage genome generated by annealing a 53mer uracil-containing scaffold to M13mp7L2 linearized by EcoRI. Following ligation, the scaffold was enzymatically removed with uracil DNA glycosylase and exonuclease III. The entire genome construction was complete within 3 h and was carried out at 16 degrees C, pH 6.6, conditions determined to be optimal for AFB1-N7-Gua stability. Characterization procedures indicated that the AFB1-N7-Gua genome was approximately 95% pure with a small (5%) contamination by unmodified genome. This construction scheme should be applicable to other chemically or thermally unstable DNA adducts.

Aflatoxin B1↗

Mutational properties of the primary aflatoxin B1-DNA adduct.

The mutagenic activity of the major DNA adduct formed by the liver carcinogen aflatoxin B1 (AFB1) was investigated in vivo. An oligonucleotide containing a single 8,9-dihydro-8-(N7-guanyl)-9-hydroxyaflatoxin B1 (AFB1-N7-Gua) adduct was inserted into the single-stranded genome of bacteriophage M13. Replication in SOS-induced Escherichia coli yielded a mutation frequency for AFB1-N7-Gua of 4%. The predominant mutation was G --> T, identical to the principal mutation in human liver tumors believed to be induced by aflatoxin. The G --> T mutations of AFB1-N7-Gua, unlike those (if the AFB1-N7-Gua-derived apurinic site, were much more strongly dependent on MucAB than UmuDC, a pattern matching that in intact cells treated with the toxin. It is concluded that the AFB1-N7-Gua adduct, and not the apurinic site, has genetic requirements for mutagenesis that best explain mutations in aflatoxin-treated cells. While most mutations were targeted to the site of the lesion, a significant fraction (13%) occurred at the base 5' to the modified guanine. In contrast, the apurinic site-containing genome gave rise only to targeted mutations. The mutational asymmetry observed for AFB1-N7-Gua is consistent with structural models indicating that the aflatoxin moiety of the aflatoxin guanine adduct is covalently intercalated on the 5' face of the guanine residue. These results suggest a molecular mechanism that could explain an important step in the carcinogenicity of aflatoxin B1.

Aflatoxin B1↗

Twenty-four hour reality orientation: changes for staff and patients.

A 24-hour reality orientation programme was initiated in a long-stay geriatric ward. Nursing and occupational therapy routines were changed specifically to meet the needs of the 20 patients participating in the programme. The assessments included the Clifton Assessment Procedures for the Elderly, the Holden Communication Scale, the Holden Orientation Facilities Scale, and the Oberleder Scale (adapted by Holden et al.). These scales were administered before, during and after completion of a study lasting 4 months. The CAPE scales showed no significant results. However, the Holden Communication Scale indicated that there were significant differences for certain groups of patients. Those patients with high scores initially tended to continue to have high scores and showed no real change. However, patients who had scores in the medium range initially, showed improvement. This finding indicated that severity at onset of the experiment was an important variable when considering outcome of treatment. Expectations regarding the future of the very elderly must be realistic, and to anticipate a return to previous vitality and total independence should not be expected. However, to find a means by which functional levels can be maintained, and even slightly improved, is desirable. It would seem that the 24-hour reality orientation programme achieved this goal.

Aged↗

A comparison of reduced-order modelling techniques for application in hyperthermia control and estimation.

Reduced-order modelling techniques can make important contributions in the control and state estimation of large systems. In hyperthermia, reduced-order modelling can provide a useful tool by which a large thermal model can be reduced to the most significant subset of its full-order modes, making real-time control and estimation possible. Two such reduction methods, one based on modal decomposition and the other on balanced realization, are compared in the context of simulated hyperthermia heat transfer problems. The results show that the modal decomposition reduction method has three significant advantages over that of balanced realization. First, modal decomposition reduced models result in less error, when compared to the full-order model, than balanced realization reduced models of similar order in problems with low or moderate advective heat transfer. Second, because the balanced realization based methods require a priori knowledge of the sensor and actuator placements, the reduced-order model is not robust to changes in sensor or actuator locations, a limitation not present in modal decomposition. Third, the modal decomposition transformation is less demanding computationally. On the other hand, in thermal problems dominated by advective heat transfer, numerical instabilities make modal decomposition based reduction problematic. Modal decomposition methods are therefore recommended for reduction of models in which advection is not dominant and research continues into methods to render balanced realization based reduction more suitable for real-time clinical hyperthermia control and estimation.

Algorithms↗