Biomedical subjects

E Drioli

Publications and source records attributed to E Drioli.

At least 19 recordsLinked to original sources

PubMed2006

Study of the surface character as responsible for controlling interfacial forces at membrane-feed interface.

The role of the interfacial forces was emphasized in interactive processes, involving membrane surface and penetrating molecules. The surface character controlling the dissolution process of some species (CO2, H2O, C3H6O2, C4H8O2, C5H10O2) was evaluated in relation to the supra-molecular chemistry of membranes based on 80PTMO/PA12. Infrared analyses combined with the estimation of the hydrophilic and hydrophobic domains of the membrane surface yielded useful information about the distribution, availability and accessibility of the polar moieties responsible for the penetrant sorption. At the interface, attractive Lewis acid/base interactions such as H-bonding directed the sorption of vapor species into the membranes, whereas quadrupolar CO2 participated in specific Lifshitz-van der Waals interactions with the modified polymers. In both the cases, the presence of additional polar moieties such as carbonyl, sulfonamide, and hydroxyl groups enhanced the affinity of the Pebax-based membranes for the penetrating species considered in this work. As a result, the quantification of the reactivity of a membrane surface for specific molecules may allow predictive models to be constructed and selective membranes to be designed.

1-Butanol↗

PubMed2006

Chromium (III) removal by supported liquid membranes: a comparison among D2HEPA, DNNSA, and a novel extractant as carriers.

A facilitated transport study in supported liquid membranes (SLM) using the extraction reagents di-2-ethylexilfosphoric acid (D2HEPA), dinonylnaftalene sulfuric acid (DNNSA), and a novel complexing agent, trimethyl cis,cis-1,3,5-tripropyl-1,3,5 cyclohexenetricarboxilic acid (TTCHTCA) as carriers has been carried out. Organic solvents with different dielectric constants as diluents have been used to obtain the highest extraction and transport values. The results obtained have shown that, by using different organic phases (carrier and/or diluent), SLMs with different ion flux and transport ability can be obtained. The carrier concentration in the membrane and the chromium (III) [Cr(III)] ions concentration in aqueous phase have been varied to see the effect on transport of Cr(III) ions across the membrane. For the carriers D2HEPA and TTCHTCA, the transport of Cr(IlI), both in batch and in recirculation operation mode, has been studied. Very good results in terms of flux and transport have been obtained using TTCHTCA.

Carcinogens, Environmental↗

PubMed2005

Force balance conditions for droplet formation in cross-flow membrane emulsifications.

The membrane emulsification process is becoming of growing interest in many industrial fields. For monitoring the influence of process and membrane parameters on the droplet formation, quantitative information on the droplet detachment, during this process, is important. Until now, droplet formation has theoretically been described using computational fluid dynamics and global force equations. Unlike computational fluid dynamics methods, the global force models are less accurate but easier to handle and instructive. On this basis, in the present paper we present new force balance equations to describe droplet detachment during cross-flow membrane emulsification. In a first approximation, the droplet is supposed to grow leaning on the pore border as long as a force balance exists along the contact line located on the membrane surface. During this phase the base of the droplet, still stuck on the pore border, begins to bend on the membrane surface until its final detachment. Using force balance equations made along the contact lines, we obtain the minimum and maximum sizes that a droplet could have during cross-flow membrane emulsification. This approach is tested with different continuous phase velocities, membrane pore sizes and interfacial tensions. The results are compared to various experimental data, reported in literature. In particular, based on the experimentally found linear correlation between droplet and pore sizes, we show how the proposed balance equations can be used to obtain a satisfactory evaluation of the slopes of this linear correlation and how these force balances could be used to obtain an estimation of the interfacial tensions during the droplet formation.

Journal Article↗

PubMed2005

Effects of organic solvents on ultrafiltration polyamide membranes for the preparation of oil-in-water emulsions.

Hydrophilic ultrafiltration membranes made of polyamide with molecular weight cutoff 10 and 50 kDa have been studied for the preparation of oil-in-water emulsions by a cross-flow membrane emulsification technique. Isooctane and phosphate buffer were used as disperse and continuous phase, respectively. The permeation of apolar isooctane through the polar hydrophilic membrane was achieved by pretreatment of membranes with a gradient of miscible solvents of decreasing polarity to remove water from the pores and replace it with isooctane. Four different procedures were investigated, based on the solvent mixture percentage and contact time with membranes. After pretreatment, the performance of the membranes in terms of pure isooctane permeate flux and emulsion preparation was evaluated. The influence of organic solvents on polyamide (PA) membranes has been studied by SEM analysis, which showed a clear change in the structure and morphology of the thin selective layers. The effects proved stronger for PA 10 kDa than for 50 kDa. In fact, similar pretreatment procedures caused larger pore size and pore size distribution for PA 10 kDa than for 50 kDa. The properties of emulsions in terms of droplet size distribution reflected the membrane pore sizes obtained after pretreatment. The correlation between pore size and droplet size, for the physicochemical and fluid dynamic conditions used, has been evaluated.

Journal Article↗

PubMed2005

Novel composite poly(4-vinylpyridine)/polypropylene membranes with recognition properties for (S)-naproxen.

In the last few years, molecular imprinting technology has entered in different fields of chemistry, biochemistry, biotechnology and medicine. The technique allows us to introduce the molecular memory of the substrate to be recognized in a polymeric material during its preparation. In the present paper, molecularly imprinted enantioselective polymer membranes were prepared by photo-copolymerization of commercial polypropylene membranes with the functional monomer 4-vinylpyridine. The (S)-naproxen was used as a template molecule. Enantioselectivity studies in a dead-end filtration system showed the recognition properties of the imprinted membranes, which exhibited a selective transport of the (S)-enantiomer.

Membranes, Artificial↗

PubMed2005

Diffusive and convective transport through hollow fiber membranes for liver cell culture.

For an efficient membrane bioreactor design, transport phenomena determining the overall mass flux of metabolites, catabolites, cell regulatory factors, and immune-related soluble factors, need to be clarified both experimentally and theoretically. In this work, experiments and calculations aimed at discerning the simultaneous influence of both diffusive and convective mechanisms to the transport of metabolites. In particular, the transmembrane mass flux of glucose, bovine serum albumin (BSA), APO-transferrin, immunoglobulin G, and ammonia was experimentally measured, under pressure and concentration gradients, through high-flux microporous hydrophilic poly-ether-sulphone (PES-HFMs) and poly-sulphone hollow fiber membranes (PS-HFMs). These data were analyzed by means of a model based on the mechanism of capillary pore diffusion, assuming that solute spherical molecules pass through an array of solvent-filled cylindrical pores with a diffusive permeation corrected for friction and steric hindrances. Additionally, resistances to the mass transfer were taken into account. Convective permeation data were discussed in terms of morphological properties of the polymeric membranes, molecular Stokes radius, and solute-membrane interactions according to information given by contact angle measurements. The observed steady-state hydraulic permeance of PS-HFMs was 0.972 L/m2hmbar, about 15.6-fold lower than that measured for PES-HFMs (15.2 L/m2h); in general, PS-HFMs provided a significant hindrance to the transport of target species. Diffusion coefficients of metabolites were found to be similar to the corresponding values in water through PES-HFMs, but significantly reduced through PS-HFMs (D(Glucose)(Membrane)=2.8x10(-6)+/-0.6x10(-6)cm2/s, D(BSA)(Membrane)=6.4 x 10(-7)+/-1 x 10(-7)cm(/s, D(Apotransferrin)(Membrane)=2.3 x 10(-7)+/-0.25 x 10(-7)cm2/s).

Ammonia↗

PubMed2005

Hybrid membrane operations in water desalination and industrial process rationalisation.

Membrane science and technology are recognized today as powerful tools in resolving some important global problems, and developing newer industrial processes, needed from the imperative of sustainable industrial growth. In seawater desalination, for resolving the dramatic increase of freshwater demand in many regions of the world, membrane unitary operations or the combination of some of them in integrated systems are already a real means for producing water from the sea, at lower costs and minimum environmental impact, with a very interesting prospective in particular for poor economy countries. However, membranes are used or are becoming used in some important industrial fields, for developing more efficient productive cycles, with reduced waste of raw-material, reducing the polluting charge by controlling byproduct generation, and reducing overall costs. In the present paper, other than for seawater desalination applications, some industrial applications where membrane technology has led already to match the goal of process intensification are discussed.

Chemical Industry↗

PubMed2004

New modified polyetheretherketone membrane for liver cell culture in biohybrid systems: adhesion and specific functions of isolated hepatocytes.

There has been growing interest in innovative materials with physico-chemical properties that provide improved blood/cell compatibility. We propose new polymeric membranes made of modified polyetheretherketone (PEEK-WC) as materials with potential for use in biohybrid devices. PEEK-WC exhibits high chemical, thermal stability and mechanical resistance. Owing to its lack of crystallinity this polymer can be used for preparing membranes with cheap and flexible methods. We compared the properties of PEEK-WC membranes to polyurethane membranes prepared using the same phase inverse technique and commercial membranes. The physico-chemical properties of the membranes were characterised by contact angle measurements. The different parameters acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) of the surface free energy were calculated according to Good-van Oss's model. We evaluated the cytocompatibility of PEEK-WC membranes by culturing hepatocytes isolated from rat liver. Cell adhesion and metabolic behaviour in terms of ammonia elimination, urea synthesis and protein synthesis were evaluated during the first days of culture. Liver cells adhered and formed three-dimensional aggregates on the most tested membranes. PEEK-WC membranes promoted hepatocyte adhesion most effectively. Urea synthesis, ammonia elimination and protein synthesis improved significantly when cells adhered to PEEK-WC membrane. The considerable metabolic activities of cells cultured on this membrane confirmed the good structural and physico-chemical properties of the PEEK-WC membrane that could be a promising biomaterial for cell culture in biohybrid devices.

Animals↗

PubMed2004

Process intensification in the textile industry: the role of membrane technology.

Process intensification is a concept that was recently introduced in the chemical industry for the purpose of reducing environmental emissions, energy consumption and materials consumption. The principle of process intensification can be used in related industries as well; textile finishing is an exemplary activity where it may have a significant long-term added value. Membrane technology can be a key factor in the recycling and reuse of energy, water and chemicals. In this paper, an integral approach for treatment of aqueous process streams in the textile finishing industry is proposed. The proposed process includes microfiltration pretreatment of used finishing baths, followed by a dual nanofiltration (NF) unit. These can be operated at elevated temperatures so that no further energy is needed for preheating of recycle streams. In the proposed treatment scheme, the first of the NF units uses a loose nanofiltration membrane that retains most of the organic fraction but not the dissolved salts. The second unit uses a tight nanofiltration membrane, which produces a permeate fraction that can be directly reused, and a concentrated brine that is fed to a membrane crystallizer. In this unit, salts are recovered and recycled for use in new dye baths. The concentrate stream from the first NF unit is fed to a membrane distillation unit, where the high temperature is advantageously used for further concentration. The remaining fraction is not reusable, given the fact that most dyes are hydrolyzed after exhaustion of the bath, but has a significant energetic value, which can be utilized for compensation of energy losses and preheating of suppletion water, by using an incineration process with energy recovery. The concept was not tested experimentally, but a simulation for a 500 m3/d production unit shows that it is feasible, although modifications may be necessary depending on the nature of the finishing baths. Furthermore, the membrane choice in the first NF unit is a critical aspect.

Conservation of Energy Resources↗

PubMed2004

Novel PEEK-WC membranes with low plasma protein affinity related to surface free energy parameters.

There has been growing interest in innovative materials with specific physico-chemical properties that provide an improved blood/cell compatibility. In this paper we evaluated the performance of new membranes prepared from a modified polyetheretherketone (PEEK-WC) contacting human plasma proteins. These membranes were prepared by using the phase inversion technique. Membrane wettability and affinity to proteins were evaluated by means of contact angle experiments, roughness measurements, and quantitative UV analysis. The energy parameters of membrane surfaces were determined according to Good, van Oss and Chaudhury's theory. The extent of human albumin, fibrinogen and immunoglobulin G adsorption was related to quantitative expressions of the membrane surface hydrophilicity: the base parameter of surface free energy and the free energy of interfacial interaction. The performance of PEEK-WC membranes was compared to that of commercial membranes, which conventionally are used in biomedical applications. The experimental results showed a reduction of protein adsorption on PEEK-WC membranes with respect to other commercial membranes. The low protein affinity of PEEK-WC membranes is due to the intrinsic physico-chemical characteristics of the polymeric material which makes these membranes interesting for potential use in biomedical applications.

Adsorption↗

PubMed2003

Use of stable emulsion to improve stability, activity, and enantioselectivity of lipase immobilized in a membrane reactor.

The enantiocatalytic performance of immobilized lipase in an emulsion membrane reactor using stable emulsion prepared by membrane emulsification technology was studied. The production of optical pure (S)-naproxen from racemic naproxen methyl ester was used as a model reaction system. The O/W emulsion, containing the substrate in the organic phase, was fed to the enzyme membrane reactor from shell-to-lumen. The enzyme was immobilized in the sponge layer (shell side) of capillary polyamide membrane with 50 kDa cut-off. The aqueous phase was able to permeate through the membrane while the microemulsion was retained by the thin selective layer. Therefore, the substrate was kept in the enzyme-loaded membrane while the water-soluble product was continuously removed from the reaction site. The results show that lipase maintained stable activity during the entire operation time (more than 250 h), showing an enantiomeric excess (96 +/- 2%) comparable to the free enzyme (98 +/- 1%) and much higher compared to similar lipase-loaded membrane reactors used in two-separate phase systems (90%). The results demonstrate that immobilized enzymes can achieve high stability as well as high catalytic activity and enantioselectivity.

Bioreactors↗

PubMed2003

Membrane treatment by nanofiltration of exhausted vegetable tannin liquors from the leather industry.

A rational use of water in the leather industry is described by applying the criteria of "clean technologies" by means of membrane processes. A nanofiltration (NF) process was used for recovering tannins and water from exhausted baths and reusing them as tanning agents and washings. Results of experiments performed on laboratory and semi-industrial pilot scale plants, operating and fluid-dynamic conditions and mass balance of the NF process are reported and discussed. Chemical and physical analytical values measured on skins treated with the recovered solutions were very similar to those measured on control skins tanned with standard solutions. According to the obtained results, a process scheme is suggested. It permits both to recover water and to increase the tannin/non tannin (T/NT) ratio in the retentate solution, starting from exhausted tanning baths and by using a NF membrane purification/concentration. The final volume reduction factor of tested exhausted baths was 5.25, the increase of T/NT ratio was from 1.1 to 2.3 and the average permeate flux was 12.5l/m(2)h. Advantages are in terms of: reduction of environmental impact (up to 75% of COD reduction of the global effluent), simplification of cleaning-up processes of wastewaters, decrease of disposal costs, saving of chemicals and water.

Conservation of Natural Resources↗

PubMed2001

Study of an enzyme membrane reactor with immobilized fumarase for production of L-malic acid.

The conversion of fumaric acid into L-malic acid by fumarase immobilized in a membrane reactor was analyzed experimentally. The enzyme was entrapped in asymmetric capillary membranes made of polysulfone. The performance of the reactor was evaluated in terms of conversion degree, reaction rate, and stability. The influence of operating conditions, such as amount of immobilized enzyme, substrate concentration, residence time, and axial flow rate, were investigated. The kinetic parameters K(m), V(max), and k(+2) were also measured. The stability of the immobilized enzyme was very good, showing no activity decay during more than 2 weeks of continuous operation.

Animals↗

PubMed2000

Biocatalytic membrane reactors: applications and perspectives.

Membranes and biotechnological tools can be used for improving traditional production systems to maintain the sustainable growth of society. Typical examples include: new and improved foodstuffs, in which the desired nutrients are not lost during thermal treatment; novel pharmaceutical products with well-defined enantiomeric compositions; and the treatment of waste-water, wherein pollution by traditional processes is a problem.

Animals↗

PubMed2000

Membrane distillation of human plasma ultrafiltrate and its theoretical applications to haemodialysis techniques.

Membrane Distillation (MD) is a technique that allows the extraction of water from aqueous solutions. The basic principle is that vapour, but not liquid water, can pass through hydrophobic micro-porous membranes, along a temperature gradient, with consequent separation of water from solutes. In this study we evaluated the possibility to utilise MD to extract water from Plasma Ultrafiltrate (PU) of patients with Chronic Renal Failure (CRF). The experiments were carried out in vitro by a hydro-phobic polypropylene hollow-fibre distillation module; PU was obtained by a CRF patient utilising a high permeability polisulphone membrane. The results show that water can be extracted by MD from PU of CRF subjects at a constant rate and that none of the substances analysed in PU was able to pass through the polypropilene membrane. In the future MD could integrate extra-corporeal blood purification techniques allowing the re-utilisation of plasmatic water thus ameliorating the treatment of uraemia.

Hemodiafiltration↗

PubMed1999

The effect of surface roughness of microporous membranes on the kinetics of oxygen consumption and ammonia elimination by adherent hepatocytes.

In membrane hybrid liver support devices (HLSDs) using isolated hepatocytes where oxygen is transported only by diffusion to the cells, about 15-40% of the cell mass is likely to be in direct contact with the semipermeable membranes used as immunoselective barriers: quantitative effects of membrane surface properties on the kinetics of hepatocyte metabolic reactions may also affect HLSD performance. In this paper, we report our investigation of the effects of surface morphology of two microporous commercial membranes on the kinetics of oxygen consumption and ammonia elimination by primary hepatocytes in adhesion culture. Isolated rat hepatocytes were cultured on polypropylene microporous membranes with different surface roughness and pore size in a continuous-flow bioreactor whose fluid dynamics was optimized for the kinetic characterization of liver cell metabolic reactions. Collagen-coated membranes were used as the reference substratum. Hepatocyte adhesion was not significantly affected by membrane surface morphology. The rates of the investigated reactions increased with ammonia concentration according to saturation kinetics: the values of kinetic parameters Vmax and K(M) increased as cells were cultured on the membrane with the greatest membrane surface roughness and pore size. For the reaction of oxygen consumption, Vmax increased from 0.066 to 0.1 pmol h(-1) per cell as surface roughness increased from 70 to 370 nm. For the kinetics of ammonia elimination. K(M) increased from 0.23 to 0.32 mM and Vmax increased from 1.49 to 1.79 pmol h(-1) per cell with membrane surface roughness increasing from 70 to 370 nm. Cells cultured on collagen-coated membranes consistently yielded the highest reaction rates. The Vmax values of 0.18 and 2.84 pmol h(-1) per cell for oxygen consumption and ammonia elimination, respectively, suggest that cell functions are also affected by the chemical nature of the substratum.

Ammonia↗

PubMed1996

The effect of oxygen transport resistances on the viability and functions of isolated rat hepatocytes.

The treatment of fulminant hepatic failure with a bioartificial liver support device relies on the possibility of replacing the detoxification and synthetic functions of the injured liver for as long as needed for patient recovery. In spite of progress in cell culture techniques, the effective use of isolated hepatocytes in liver support devices is currently hampered by a lack of information on the metabolic factors limiting long term hepatocyte culture. In this paper, we report our investigation on the effects of oxygen transport resistances on the viability and functions of isolated rat hepatocytes cultured on collagen coated Petri dishes. Detoxification and synthetic functions of the hepatocytes were studied with respect to ammonia and phenolsulphonphthalein elimination and urea synthesis. Lower resistances to oxygen transport favored hepatocyte survival. The isolated hepatocytes synthesized urea at rates that decreased as the resistance to oxygen transport increased. The rate at which urea was synthesized also decreased during the culture. Neither PSP, nor ammonia elimination rate was greatly affected by increasing oxygen transport resistances and remained rather constant up to a week of culture.

Ammonia↗

PubMed1996

The effect of catabolite concentration on the viability and functions of isolated rat hepatocytes.

The treatment of patients with hepatic failure by means of hybrid liver support devices using primary xenogeneic hepatocytes is currently hindered by the rapid loss of cell metabolic functions. Similarly to what happens with other mammalian cells, accumulation of catabolites in the neighborhood of cultured hepatocytes might significantly affect their viability and functions. In this paper, we investigated the effects of high concentrations of catabolites, such as ammonia and lactic acid, on the viability and functions of rat hepatocytes cultured on collagen coated Petri dishes. The effects on hepatocyte functions were established with respect to their ability to synthesize urea and to eliminate ammonia. Indeed, high catabolite concentrations effected both hepatocyte viability and functions. The number of viable hepatocytes decreased with increasing ammonia concentrations in the culture medium. High ammonia concentrations had also both an inhibitory and a toxic effect on hepatocyte functions. In fact, the hepatocytes synthesized urea and eliminated ammonia at rates that decreased with increasing ammonia concentrations. Similarly, high lactic acid concentrations were toxic to the cells and also inhibited their synthetic functions.

Ammonia↗