Biomedical subjects

E J Calvo

Publications and source records attributed to E J Calvo.

5 recordsLinked to original sources

PubMed2006

Oxidation-reduction dynamics in layer-by-layer self-assembled redox polyelectrolyte multilayer modified electrodes.

The oxidation-reduction dynamics of layer-by-layer (LbL) self-assembled redox polyelectrolyte multilayer films on electrodes has been studied by cyclic voltammetry, chrono-amperometry, electrochemical quartz crystal microbalance (EQCM), ellipsometry, and Fourier transform reflection-absorption infrared spectroscopy (FT-IRRAS). Thin layer electrochemistry with fast electron transfer at the underlying metal-film interface and charge propagation by electron hopping between adjacent redox sites in the finite thin film has been observed. An almost ideal cyclic voltammetry for a fixed number of redox sites in the thin surface film suggests that the multilayer can be fully oxidized and reduced in the time scale of the experiment (RT/vF > or = 0.05 sec). The electron hopping diffusion coefficient 3 x 10(-10) cm2 s(-1) was obtained from the chronoamperometric current transient and the ellipsometric thickness. Both cyclic voltammetry and potential step yield a surface osmium bipyridyl redox concentration of gamma Os = 4 x 10(-10) mol x cm(-2) for (PAH-Os)5(PVS)4 film. Exchange of ions and solvent occur simultaneously to the charge injection as revealed by the EQCM mass change and the ellipsometric thickness change. From the end-to-end mass-to-charge linear relationship, the molar mass of the ionic and neutral species exchanged largely exceeds the molar mass of any ions or solvent which suggests an important flux of solvent during redox switching. An initial "break in" effect is observed for the first oxidation-reduction cycles when a newly self-assembled film equilibrates with the electrolyte as charge is injected during the electrochemical perturbation.

Electrochemistry↗

PubMed2004

Characterization of self-assembled redox polymer and antibody molecules on thiolated gold electrodes.

Multilayer immobilization of antibody and redox polymer molecules on a gold electrode was achieved, as a strategy for the potential development of an amperometric immunosensor. The step-by-step assembly of antibiotin IgG on Os(bpy)(2)ClPyCH(2)NH poly(allylamine) redox polymer (PAH-Os) adsorbed on thiolated gold electrodes was proved by quartz crystal microbalance (QCM) and atomic force microscopy (AFM) experiments, confirming the electrochemical evidence. The increase of redox charge during the layer-by-layer deposition demonstrated that charge propagation within the layers is feasible. The multilayer structure proved to be effective for the molecular recognition of horseradish peroxidase-biotin conjugate (HRP-biotin), as confirmed by the QCM measurements and the electrocatalytic reduction current obtained upon H(2)O(2) addition. The catalytic current resulting from PAH-Os mediation was shown to increase with the number of assembled layers. Furthermore, the inventory of IgG molecules on the supramolecular self-assembled structure and the specific and non-specific binding of HRP-biotin conjugate were confirmed by the QCM transient studies, giving information on the kinetics of IgG deposition and HRP-biotin conjugate binding to the IgG.

Antibodies↗

PubMed2001

Layer-by-layer self-assembly of glucose oxidase and Os(Bpy)2CIPyCH2NH-poly(allylamine) bioelectrode.

The uptake of glucose oxidase (GOx) onto a polycationic redox polymer (PAA-Os)-modified surface, by adsorption from dilute aqueous GOx solutions, was followed by the quartz crystal microbalance (QCM) and shows double exponential kinetics. The electrochemistry of the layer-by-layer-deposited redox-active polymer was followed by cyclic voltammetry in glucose-free solutions, and the enzyme catalysis mediated by the redox polymer was studied in beta-D-glucose-containing solutions. AFM studies of the different layers showed the existence of large two dimension enzyme aggregates on the osmium polymer for 1 microM GOx and less aggregation for 50 nM GOx solutions. When the short alkanethiol, 2,2'-diaminoethyldisulfide was preadsorbed onto gold, a monoexponential adsorption law was observed, and single GOx enzyme molecules could be seen on the surface where the enzyme was adsorbed from 50 nM GOx in water.

Biosensing Techniques↗

PubMed2000

Electrochemical behavior of polyphenol oxidase immobilized in self-assembled structures layer by layer with cationic polyallylamine.

We report here a novel bioelectrode based on self-assembled multilayers of polyphenol oxidase intercalated with cationic polyallylamine built up on a thiol-modified gold surface. We use an immobilization strategy previously described by Hodak J. et al. (Langmuir 1997, 13, 2708-2716) Quartz crystal microbalance with electroacustic impedance experiments were carried out to follow quantitatively the multilayer film formation. The response of the self-assembly polyphenol oxidase-polyallylamine electrodes toward different metabolically related catecholamines was studied, to evaluate enzyme kinetics. For the analyzed compounds, only dopamine and its metabolite Dopac gave catalytic currents at applied potential close to 0 V. These responses were proportional to the number of polyphenol oxidase-immobilized layers and were also controlled by the enzymatic reaction. The combination of microgravimetric and electrochemical techniques allowed us to determine the kinetic enzymatic constants, showing that the decomposition rate for the enzyme-substrate complex is slower than the enzymatic reoxidation step.

Catechol Oxidase↗

PubMed2000

Layer-by-layer electrostatic deposition of biomolecules on surfaces for molecular recognition, redox mediation and signal generation.

Layer-by-layer supramolecular structures composed of alternate layers of negatively charged enzymes and cationic redox polyelectrolyte have been assembled. Glucose oxidase (GOx), lactate oxidase (LOx) and soybean peroxidase (SBP) have been electrically wired to the underlying electrode by means of poly(allylamine) with [Os(bpy)2ClPyCOH]+ covalently attached (PAA-Os) in organized structures with high spatial resolution. Biotinylated glucose oxidase has also been used to assemble step-by-step on antibiotin goat immunoglobulin (IgG) layers and the enzyme was electrically wired by PAA-Os. These spatially organized multilayers with mono- and bienzymatic schemes can work efficiently in molecular recognition, redox mediation and generation of an electrical signal. The concentration of redox mediator integrated into the multilayers, obtained from the voltammetric charge and an estimation of the layer thickness, exceeds by 100-fold the amount of deposited enzyme assessed by quartz crystal microbalance. Differences in GOx electrical wiring efficiency have been detected with the different assembling strategies. The surface concentration of electrically wired enzyme represents a small proportion of all the enzyme molecules present in the multilayers which can be oxidized by the soluble mediator [Os(bpy)2Cl PyCOOH]Cl. This proportion, as well as the rate of FADH2 oxidation by PAA-Os, increases with the number of electrically wired enzyme layers and with the spatial accessibility of the Os moiety to the enzyme active center.

Adsorption↗