PubMed HealthSearch

Biomedical subjects

E J Dodson

Publications and source records attributed to E J Dodson.

At least 19 recordsLinked to original sources

Validation tools: can they indicate the information content of macromolecular crystal structures?

The explosive increase in the number of published three-dimensionsal structures of macromolecules determined by X-ray analysis places a responsibility on experimentalists, referees and curators of databases to ensure correspondence between the structure parameters and data. Validation tools will evolve as more appropriate statistical techniques and new information, such as that from proteins analysed at atomic resolution, becomes available.

Crystallography

Crystal structure of tryptophanase.

The X-ray structure of tryptophanase (Tnase) reveals the interactions responsible for binding of the pyridoxal 5'-phosphate (PLP) and atomic details of the K+ binding site essential for catalysis. The structure of holo Tnase from Proteus vulgaris (space group P2(1)2(1)2(1) with a = 115.0 A, b = 118.2 A, c = 153.7 A) has been determined at 2.1 A resolution by molecular replacement using tyrosine phenol-lyase (TPL) coordinates. The final model of Tnase, refined to an R-factor of 18.7%, (Rfree = 22.8%) suggests that the PLP-enzyme from observed in the structure is a ketoenamine. PLP is bound in a cleft formed by both the small and large domains of one subunit and the large domain of the adjacent subunit in the so-called "catalytic" dimer. The K+ cations are located on the interface of the subunits in the dimer. The structure of the catalytic dimer and mode of PLP binding in Tnase resemble those found in aspartate amino-transferase, TPL, omega-amino acid pyruvate aminotransferase, dialkylglycine decarboxylase (DGD), cystathionine beta-lyase and ornithine decarboxylase. No structural similarity has been detected between Tnase and the beta 2 dimer of tryptophan synthase which catalyses the same beta-replacement reaction. The single monovalent cation binding site of Tnase is similar to that of TPL, but differs from either of those in DGD.

Amino Acid Sequence

The structure of the cofactor-binding fragment of the LysR family member, CysB: a familiar fold with a surprising subunit arrangement.

BACKGROUND: CysB is a tetrameric protein of identical subunits (M(r) = 36,000) which controls the expression of genes associated with the biosynthesis of cysteine in bacteria. CysB is both an activator and a repressor of transcription whose activity is responsive to the inducer N-acetylserine; thiosulphate and sulphide act as anti-inducers. CysB is a member of the LysR family of prokaryotic transcriptional regulatory proteins which share sequence similarities over approximately 280 residues including a putative helix-turn-helix DNA-binding motif at their N terminus. The aims of the present study were to explore further the complex molecular biology and curious ligand binding properties of CysB and to provide structural insights into the LysR family of proteins. RESULTS: The crystal structure of a dimeric chymotryptic fragment of Klebsiella aerogenes CysB comprising residues 88-324, has been solved by multiple isomorphous replacement and multi-crystal averaging and refined against data extending to 1.8 A resolution. The protein comprises two alpha/beta domains (I and II) connected by two short segments of polypeptide. The two domains enclose a cavity lined by polar sidechains, including those of two residues whose mutation is associated with constitutive expression of the cysteine regulon. A sulphate anion and a number of well ordered water molecules have been modelled into discrete electron-density peaks within this cavity. In the dimer, strands beta B from domain I and strands beta G from domain II come together so that a pair of antiparallel symmetry-related 11-stranded twisted beta-pleated sheets is formed. CONCLUSIONS: The overall structure of CysB(88-324) is strikingly similar to those of the periplasmic substrate-binding proteins. A similar fold has also been observed in the cofactor-binding domain of Lac repressor, implying a structural relationship between the Lac repressor and LysR families of proteins. In contrast to Lac repressor, in CysB the twofold axis of symmetry that relates the monomers in the dimer is perpendicular rather than parallel to the long axis of the cofactor-binding domain. This seems likely to place the DNA-binding domains at opposite extremes of the molecule possibly accounting for CysB's extended DNA footprints.

Amino Acid Sequence

Peptide binding in OppA, the crystal structures of the periplasmic oligopeptide binding protein in the unliganded form and in complex with lysyllysine.

The periplasmic oligopeptide binding protein, OppA, acts as the initial receptor for the uptake of peptides by the oligopeptide permease (Opp) in Gram-negative bacteria. Opp will handle peptides between two and five amino acid residues regardless of their sequence. The crystal structures of a series of OppA-peptide complexes have revealed an enclosed but versatile peptide binding pocket and have illustrated how tri- and tetrapeptide ligands are accommodated. Here, the crystal structures of (i) OppA complexed with a dipeptide (lysyllysine) and (ii) unliganded OppA have been solved using X-ray data extending to 1.8 and 2.4 A spacing, respectively. In the dipeptide complex, the alpha-amino group of the ligand is anchored through an ion pair interaction with Asp419, as observed in complexes with longer peptides. However, its alpha-carboxylate group forms water-mediated interactions with the guanidinium groups of Arg404 and Arg413 rather than the direct salt bridges to Arg413 and His371 observed in the tripeptide and tetrapeptide complexes, respectively. Isothermal titration calorimetric measurements of the binding of lysine-containing peptides of different lengths to OppA show that the dipeptide, KK, is bound with approximately 60-fold lower affinity than related tri- and tetrapeptides (KKK and KKKA, respectively). These data are discussed with reference to the calculated enthalpic and entropic contributions to ligand binding and the structures of the OppA peptide complexes. In the unliganded molecule, domain III has rotated as a rigid body through 26 degrees away from domains I and II, exposing the ligand binding site. The water structure in the binding cleft shows similarities to that in the various OppA-peptide complexes.

Bacterial Proteins

The structure of the GTPase-activating domain from p50rhoGAP.

Members of the Rho family of small G proteins transduce signals from plasma-membrane receptors and control cell adhesion, motility and shape by actin cytoskeleton formation. They also activate other kinase cascades. Like all other GTPases, Rho proteins act as molecular switches, with an active GTP-bound form and an inactive GDP-bound form. The active conformation is promoted by guanine-nucleotide exchange factors, and the inactive state by GTPase-activating proteins (GAPs) which stimulate the intrinsic GTPase activity of small G proteins. Rho-specific GAP domains are found in a wide variety of large, multi-functional proteins. Here we report the crystal structure of an active 242-residue C-terminal fragment of human p50rhoGAP. The structure is an unusual arrangement of nine alpha-helices, the core of which includes a four-helix bundle. Residues conserved across the rhoGAP family are largely confined to one face of this bundle, which may be an interaction site for target G proteins. In particular, we propose that Arg 85 and Asn 194 are involved in binding G proteins and enhancing GTPase activity.

Amino Acid Sequence

Enzymatic ketonization of 2-hydroxymuconate: specificity and mechanism investigated by the crystal structures of two isomerases.

5-Carboxymethyl-2-hydroxymuconate isomerase (CHMI) and 4-oxalocrotonate tautomerase (4-OT) are enzymes that catalyze the isomerization of unsaturated ketones. They share a common enzyme mechanism, although they show a preference for different substrates. There is no apparent sequence homology between the enzymes. To investigate the molecular mechanism and the basis for their substrate specificity, we have determined the crystal structures of the two enzymes at high resolution. 4-OT is hexameric, with the subunits arranged with 32 symmetry. CHMI is trimeric and has extensive contacts between subunits, which include secondary structural elements. The central core of the CHMI monomer has a fold similar to a 4-OT dimer, but the secondary structural elements that form the subunit contacts around the 3-fold axis are different in the two enzymes. The region of greatest similarity between the two enzymes is a large pocket that is proposed to be the active site. The enzymes appear to operate via a "one-base" mechanism, and the possible role of residues in this pocket is discussed in view of this idea. Finally, the molecular basis for substrate specificity in the two enzymes is discussed.

Binding Sites

Modern developments in molecular replacement.

Molecular replacement is a possible route to obtaining initial phasing for an unknown structure from a known, structurally related molecule. Recent years have seen an explosive growth in the number of protein structures solved using this technique. Automated packages can make the application quite straightforward. Progress has been made in the placing of fragments of complexes, and in the use of imprecise models from NMR or homology modelling. Such models have necessitated the development of new approaches to rebuilding and refinement.

Animals

Circular assemblies.

During 1994 and 1995, the structures of the serum amyloid P component, the bacterial chaperonin GroEL, the 20S proteasome, the bacterial light-harvesting complexes and the tryptophan operon RNA-binding attenuation protein have been determined. These structures all form circular assemblies in which the individual subunits are related by rotational symmetry. In most cases the circular organization generates a new biophysical property and a specific biological function which have presumably been selected by evolution.

Bacterial Proteins

The crystal structures of the oligopeptide-binding protein OppA complexed with tripeptide and tetrapeptide ligands.

BACKGROUND: The periplasmic oligopeptide-binding protein OppA has a remarkably broad substrate specificity, binding peptides of two or five amino-acid residues with high affinity, but little regard to sequence. It is therefore an ideal system for studying how different chemical groups can be accommodated in a protein interior. The ability of the protein to bind peptides of different lengths has been studied by co-crystallising it with different ligands. RESULTS: Crystals of OppA from Salmonella typhimurium complexed with the peptides Lys-Lys-Lys (KKK) and Lys-Lys-Lys-Ala (KKKA) have been grown in the presence of uranyl ions which form important crystal contacts. These structures have been refined to 1.4 A and 2.1 A, respectively. The ligands are completely enclosed, their side chains pointing into large hydrated cavities and making few strong interactions with the protein. CONCLUSIONS: Tight peptide binding by OppA arises from strong hydrogen bonding and electrostatic interactions between the protein and the main chain of the ligand. Different basic side chains on the protein form salt bridges with the C terminus of peptide ligands of different lengths.

Amino Acid Sequence

X-ray crystallographic studies on hexameric insulins in the presence of helix-stabilizing agents, thiocyanate, methylparaben, and phenol.

Three X-ray crystallographic studies have been carried out on pig insulin in the presence of three ligands, thiocyanate, methylparaben (methyl p-hydroxybenzoate), and phenol. In each case, rhombohedral crystals were obtained, which diffracted to 1.8, 1.9, and 2.3 A, respectively. Each crystal structure was very similar to that of 4-zinc pig insulin, which was used as a starting model for PROLSQ refinement (Collaborative Computational Project, Number 4, 1994). The R factors for the refined structures of thiocyanate insulin, methylparaben insulin, and phenol insulin were 19.6, 18.4, and 19.1, respectively. Each crystal structure consists of T3R3f insulin hexamers with two zinc ions per hexamer. In the R3f trimer of the thiocyanate insulin hexamer, one thiocyanate ion is coordinated to the zinc on the hexamer 3-fold axis, but there is no evidence of zinc ion binding in the off-axis zinc ion sites seen in the 4-zinc pig insulin structure. In the methylparaben insulin and phenol insulin hexamers, the phenolic ligands are bound at the dimer-dimer interfaces in the R3f trimers in a manner similar to that of phenol in R6 phenol insulin. The binding of methylparaben appears to make the hexamer more compact by drawing the A and the B chains closer together in the binding site. In all three structures presented herein, the conformations of the first three residues of the B chain in the R3f trimer are extended rather than alpha-helical, as is seen in R6 phenol insulin. The energetics of ligand binding in the insulin hexamer are discussed.

Animals

The crystal structure of a major secreted aspartic proteinase from Candida albicans in complexes with two inhibitors.

BACKGROUND: Infections caused by Candida albicans, a common fungal pathogen of humans, are increasing in incidence, necessitating development of new therapeutic drugs. Secreted aspartic proteinase (SAP) activity is considered an important virulence factor in these infections and might offer a suitable target for drug design. Amongst the various SAP isozymes, the SAP2 gene product is the major form expressed in a number of C. albicans strains. RESULTS: The three-dimensional structures of SAP2 complexed with the tight-binding inhibitor A70450 (a synthetic hexapeptide analogue) and with the general aspartic proteinase inhibitor pepstatin A (a microbial natural product) have been determined to 2.1 A and 3.0 A resolution, respectively. Although the protein structure retains the main features of a typical aspartic proteinase, it also shows some significant differences, due mainly to several sequence insertions and deletions (as revealed by homology modelling), that alter the shape of the binding cleft. There is also considerable variation in the C-terminal structural domain. CONCLUSIONS: The differences in side chains, and in the conformations adopted by the two inhibitors, particularly at their P4, P3 and P'2 positions (using standard notation for protease-inhibitor residues), allows the A70450 structure to complement, more accurately, that of the substrate-binding site of SAP2. Some differences in the binding clefts of other SAP isoenzymes may be deduced from the SAP2 structure.

Amino Acid Sequence

The crystal structure of a cyanogenic beta-glucosidase from white clover, a family 1 glycosyl hydrolase.

BACKGROUND: beta-glucosidases occur in a variety of organisms and catalyze the hydrolysis of aryl and alkyl-beta-D-glucosides as well as glucosides with only a carbohydrate moiety (such as cellobiose). The cyanogenic beta-glucosidase from white clover (subsequently referred to as CBG) is responsible for the cleavage of cyanoglucosides. Both CBG and the cyanoglucosides occur within the plant cell wall where they are found in separate compartments and only come into contact when the leaf tissue experiences mechanical damage. This results in the eventual production of hydrogen cyanide which acts as a deterrent to grazing animals. beta-glucosidases have been assigned to particular glycosyl hydrolase families on the basis of sequence similarity; this classification has placed CBG in family 1 (there are a total of over 40 families) for which a three-dimensional structure has so far not been determined. This is the first report of the three-dimensional structure of a glycosyl hydrolase from family 1. RESULTS: The crystal structure of CBG has been determined using multiple isomorphous replacement. The final model has been refined at 2.15 A resolution to an R factor of 18.9%. The overall fold of the molecule is a (beta/alpha)8 [or (alpha/beta)8] barrel (in common with a number of glycosyl hydrolases) with all residues located in a single domain. CONCLUSIONS: Sequence comparisons between beta-glucosidases of the same family show that residues Glu183 and Glu397 are highly conserved. Both residues are positioned at the end of a pocket located at the C terminus of the barrel and have been assigned the respective roles of proton donor and nucleophile on the basis of inhibitor-binding and mutagenesis experiments. These roles are consistent with the environments of the two residues. The pocket itself is typical of a sugar-binding site as it contains a number of charged, aromatic and polar groups. In support of this role, we present crystallographic data on a possible product complex between CBG and glucose, resulting from co-crystallization of the native enzyme with its natural substrate, linamarin.

Binding Sites

The structure of trp RNA-binding attenuation protein.

The crystal structure of the trp RNA-binding attenuation protein of Bacclius subtilis solved at 1.8 A resolution reveals a novel structural arrangement in which the eleven subunits are stabilized through eleven intersubunit beta-sheets to form a beta-wheel with a large central hole. The nature of the binding of L-tryptophan in clefts between adjacent beta-sheets in the beta-wheel suggests that this binding induces conformational changes in the flexible residues 25-33 and 49-52. It is argued that upon binding, the messenger RNA target forms a matching circle in which eleven U/GAG repeats are bound to the surface of the protein ondecamer modified by the binding of L-tryptophan.

Amino Acid Sequence

Penicillin acylase has a single-amino-acid catalytic centre.

Penicillin acylase (penicillin amidohydrolase, EC 3.5.1.11) is widely distributed among microorganisms, including bacteria, yeast and filamentous fungi. It is used on an industrial scale for the production of 6-aminopenicillanic acid, the starting material for the synthesis of semi-synthetic penicillins. Its in vivo role remains unclear, however, and the observation that expression of the Escherichia coli enzyme in vivo is regulated by both temperature and phenylacetic acid has prompted speculation that the enzyme could be involved in the assimilation of aromatic compounds as carbon sources in the organism's free-living mode. The mature E. coli enzyme is a periplasmic 80K heterodimer of A and B chains (209 and 566 amino acids, respectively) synthesized as a single cytoplasmic precursor containing a 26-amino-acid signal sequence to direct export to the cytoplasm and a 54-amino-acid spacer between the A and B chains which may influence the final folding of the chains. The N-terminal serine of the B chain reacts with phenylmethylsulphonyl fluoride, which is consistent with a catalytic role for the serine hydroxyl group. Modifying this serine to a cysteine inactivates the enzyme, whereas threonine, arginine or glycine substitution prevents in vivo processing of the enzyme, indicating that this must be an important recognition site for cleavage. Here we report the crystal structure of penicillin acylase at 1.9 A resolution. Our analysis shows that the environment of the catalytically active N-terminal serine of the B chain contains no adjacent histidine equivalent to that found in the serine proteases. The nearest base to the hydroxyl of this serine is its own alpha-amino group, which may act by a new mechanism to endow the enzyme with its catalytic properties.

Amino Acid Sequence

DNA-nogalamycin interactions: the crystal structure of d(TGATCA) complexed with nogalamycin.

The structure of the self-complementary deoxyoligonucleotide d5'(TGATCA) complexed with nogalamycin, an antitumor anthracycline, has been solved to 1.8 A resolution using X-ray crystallographic methods. The technique of single isomorphous replacement, utilizing the anomalous signal of bromine in derivative data collected at three different wavelengths, Cu K alpha, Mo K alpha, and 0.91 A synchroton radiation, was used. The complex crystallized in space group P4(1)2(1)2 with unit cell dimensions a = 37.2 A and c = 70.1 A. The final structure including 116 water molecules has an overall R factor of 19.5% for the 4767 reflections with F > or = 1 sigma F in the resolution range 10.0-1.8 A. One nogalamycin molecule intercalates between each of the d5'(TpG) steps at both ends of a distorted B DNA double helix. This structure provides the first three-dimensional picture of nogalamycin bound to the triplet sequence d5'(TGA), one of its favorable natural binding sites. The drug exhibits a strict requirement for binding to the 3' side of a pyrimidine and the 5' side of a purine. Nogalamycin has bulky sugar groups at either end of a planar aglycon chromophore; therefore, in order for intercalation to occur, the DNA must either transiently open or flex along the helix axis to allow insertion of the chromophore between the base pairs. Conformational change in nogalamycin is observed in the drug-DNA complex with respect to free nogalamycin. Nogalamycin binding to DNA induces severe deformation to the intercalation site base pairs. In comparison to previously reported anthracycline-DNA structures significant differences in base-pair geometry, drug hydrogen-bonding patterns, and the extent of hydration are observed. The position of the drug in this complex is stabilized by a number of nonbonded forces including van der Waals interactions and extensive direct and solvent-mediated hydrogen bonds to the DNA duplex.

Crystallography, X-Ray