Biomedical subjects

E J Menke

Publications and source records attributed to E J Menke.

4 recordsLinked to original sources

PubMed2006

Bismuth telluride (Bi2Te3) nanowires: synthesis by cyclic electrodeposition/stripping, thinning by electrooxidation, and electrical power generation.

Nanowires composed of the thermoelectric material Bi2Te3 were synthesized on highly oriented pyrolytic graphite (HOPG) electrodes using the electrochemical step edge decoration (ESED) method. Nanowire synthesis was initiated by applying a voltage pulse of -0.75 V versus SCE for 5 ms to an HOPG electrode in an aqueous solution containing both Bi3+ and TeO22-, thereby producing nuclei at the step edges. Bi2Te3 was electrodeposited onto these nuclei using a cyclic electrodeposition-stripping scheme that involved the electrodeposition of bismuth-rich Bi2Te3 on a negative-going voltammetric scan (to -0.05 V) and the subsequent anodic stripping of excess bismuth from these nanowires during a positive-going scan (to +0.35 V). When this cycle was repeated 10-50 times, Bi2Te3 nanowires in the 100-300-nm-diameter range were obtained. These nanowires were narrowly dispersed in diameter (RSDdia = 10-20%), were more than 100 microm in length, and were organized into parallel arrays containing hundreds of wires. Smaller nanowires, with diameters down to 30 nm, were obtained by electrooxidizing 150-nm-diameter Bi2Te3 nanowires at +0.37 V under conditions of kinetic control. This oxidation process unexpectedly improved the uniformity of Bi2Te3 nanowires, and X-ray photoelectron spectroscopy (XPS) shows that these nanowires retain a Bi2Te3 core but also have a thin surface layer composed of Bi and Te oxides. The ability of Bi2Te3 nanowires to generate electrical power was assessed by transferring ensembles of these nanowires onto cyanoacrylate-coated glass surfaces and evaporating 4-point nickel contacts. A dimensionless figure of merit, ZT, ranging from 0 to 0.85 was measured for fresh samples that were less than 1 day old. XPS reveals that Bi2Te3 nanowires are oxidized within a week to Bi2O3 and TeO2. These oxides may interfere with the application by evaporation of electrical contacts to these nanowires.

Alloys↗

PubMed2006

Lithographically patterned nanowire electrodeposition.

Nanowire fabrication methods can be classified either as 'top down', involving photo- or electron-beam lithography, or 'bottom up', involving the synthesis of nanowires from molecular precursors. Lithographically patterned nanowire electrodeposition (LPNE) combines attributes of photolithography with the versatility of bottom-up electrochemical synthesis. Photolithography defines the position of a sacrificial nickel nanoband electrode, which is recessed into a horizontal trench. This trench acts as a 'nanoform' to define the thickness of an incipient nanowire during its electrodeposition. The electrodeposition duration determines the width of the nanowire. Removal of the photoresist and nickel exposes a polycrystalline nanowire--composed of gold, platinum or palladium--characterized by thickness and width that can be independently controlled down to 18 and 40 nm, respectively. Metal nanowires prepared by LPNE may have applications in chemical sensing and optical signal processing, and as interconnects in nanoelectronic devices.

Journal Article↗

PubMed2006

Shrinking nanowires by kinetically controlled electrooxidation.

Nanowires composed of antimony, gold, and bismuth telluride (Bi2Te3) were reduced in diameter by electrooxidation in aqueous solutions. When electrooxidation was carried out using low current densities (Jox < 150 microA cm(-2)), the mean wire diameter decreased in direct proportion to the oxidation time, as expected for a kinetically controlled process. Under these conditions, the diameter uniformity of nanowires remained constant as wires were shrunk from initial diameters of more than 120 nm to less than 40 nm, for Sb and Bi2Te3, and less than 60 nm for Au. Oxidized nanowires remained continuous for more than 100 microm. Electrooxidation at higher current densities rapidly introduced breaks into these nanowires. Electrochemical wire growth and shrinking by electrooxidation were integrated into a single electrochemical experiment that allowed the final mean diameter of nanowires to be specified with a precision of 5-10 nm.

Journal Article↗

PubMed2005

Shape- and size-selective electrochemical synthesis of dispersed silver(I) oxide colloids.

Silver(I) oxide (Ag2O) micro- and nanoparticles were electrochemically synthesized by anodizing a sacrificial silver wire in a basic aqueous sulfate solution. Ag2O particles were released from the silver electrode surface during synthesis producing a visible sol "stream". The composition of these particles was established using selected area electron diffraction, X-ray diffraction, and X-ray photoelectron spectroscopy. The shape of Ag2O crystallites could be adjusted using the potential of the silver wire generator electrode. The generation of a dispersed Ag2O sol and the observed shape selectivity are both explained by a two-step mechanism involving the anodic dissolution of silver metal, Ag0 --> Ag+(aq) + 1e-, followed by the precipitation of Ag2O particles, 2Ag+ + 2OH- --> Ag2O(s) + H2O. Within 100 mV of the voltage threshold for particle growth, cubic particles with a depression in each face ("hopper crystals") were produced. The application of more positive voltages resulted in the generation of 8-fold symmetric "flower"-shaped particles formed as a consequence of fast growth in the <111> crystallographic direction. The diameter of flower particles was adjustable from 250 nm to 1.8 microm using the growth duration at constant potential.

Journal Article↗