PubMed Health⌕ Search

Biomedical subjects

E Kenndler

Publications and source records attributed to E Kenndler.

At least 19 recordsLinked to original sources
PubMed2001

Retention of bile salts in micellar electrokinetic chromatography: relation of capacity factor to octanol-water partition coefficient and critical micellar concentration.

The capacity factors of 16 anionic cholates (from six bile salts, including their glyco- and tauro-conjugates) were determined in a micellar electrokinetic chromatography (MEKC) system consisting of buffer, pH 7.5 (phosphate-boric acid; 20 mmol/l) with 50 mmol/l sodium dodecyl sulfate (SDS) as micelle former and 10% acetonitrile as organic modifier. The capacity factors of the fully dissociated, negatively charged analytes (ranging between 0.2 and 60) were calculated from their mobilities, with a reference background electrolyte (BGE) without SDS representing "free" solution. For comparison, the capacity factors were derived for a second reference BGE where the SDS concentration (5 mmol/l) is close to the critical micellar concentration (CMC). The capacity factors are compared with the logarithm of the octanol-water partition coefficient, log Pow, as measure for lipophilicity. Clear disagreement between these two parameters is found especially for epimeric cholates with the hydroxy group in position 7. In contrast, fair relation between the capacity factor of the analytes and their CMC is observed both depending strongly on the orientation of the OH groups, and tauro-conjugation as well. In this respect the retention behaviour of the bile salts in MEKC seems to reflect their role as detergents in living systems, and might serve as model parameter beyond lipophilicity.

Bile Acids and Salts↗
PubMed2001

Complexes between monoclonal antibodies and receptor fragments with a common cold virus: determination of stoichiometry by capillary electrophoresis.

Complex formation between monoclonal antibodies or soluble receptor fragments and a human rhinovirus is quantified by relating the concentration of the antibody or receptor under equilibrium conditions to the initial concentration of the virus. Within a given concentration range of the reactants, the shape of the resulting curve depends only on the value of the dissociation constant of the particular system studied. Using antibodies and receptor fragments, cases for high, low, and intermediate affinity were investigated. For high-affinity systems, the curve approximates a decaying straight line and the binding stoichiometry can be accurately determined from the intercept with the x-axis. For the case of intermediate affinity, the curve can be linearized at low virus concentrations with the receptors present in large excess. Extrapolation of this line allows derivation of the binding stoichiometry from the intercept with the x-axis, although with less accuracy. For intermediate affinities, an estimate of the dissociation constant can be obtained from fitting the curve to the data points measured. Finally, in the case of low affinity none of the binding parameters can be quantified, although a rough estimate of the lower limit of the dissociation constant is possible. The method was applied for two different monoclonal antibodies, a Fab fragment and a receptor fragment, binding to human rhinovirus serotype 2. Thirty copies of the monoclonal antibody 8F5 were found to bind to the virion, which is in agreement with data from electron cryomicroscopy. The complex between monovalent human very-low-density lipoprotein receptor encompassing repeats 2 and 3 and human rhinovirus serotype 2 showed 60 receptor molecules bound per virion.

Antibodies, Monoclonal↗
PubMed2001

Electrophoretic mobilities of cationic analytes in non-aqueous methanol, acetonitrile and their mixtures. Influence of ionic strength and ion-pair formation.

The mobilities of cationic analytes in organic solvents and water are compared, and the reasons for differences in the mobilities are discussed in detail. Actual mobilities (at background electrolyte concentration 10 mmol/l) of anilinium ions were determined by capillary zone electrophoresis in water, methanol, acetonitrile and mixtures of methanol and acetonitrile (in volume ratios 1:1, 1:3 and 3:1). The actual mobilities correlated with the viscosity of the organic solvent: the products of actual mobility and viscosity were constant within 7%. However, these products were significantly larger in water. Larger products of mobility and viscosity in water were also found for unsubstituted anilinium when the absolute mobility (at zero ionic strength) was taken into consideration. Thus, ion-solvent interactions must be responsible for the seemingly high mobility in water compared with that in organic solvents. This finding can be explained by the effect of the ion on the water structure. Based on equilibrium constant for ion-pair formation given in the literature, about 20% of the main background electrolyte constituent (tetrapropylammonium perchlorate) is associated at 10 mmol/l concentration in acetonitrile. Comparison of the plot of the measured mobilities of the analytes vs. the square root of the corrected ionic strength of the background electrolyte in acetonitrile with the prediction based on the Debye-Hückel-Onsager theory showed the measured mobilities deviate negatively from the theoretical line. This is apparently due to ion pairing, which takes place for the analytes as well.

Acetonitriles↗
PubMed2001

Extension of the application range of UV-absorbing organic solvents in capillary electrophoresis by the use of a contactless conductivity detector.

A contactless conductivity detection (CCD) system is used for capillary zone electrophoresis (CZE) with non-aqueous solvents of the buffering background electrolyte, which exhibit strong UV absorbance below 230 nm. It is found that the CCD characteristics with such solvents (propylene carbonate, N,N-dimethylformamide and N.N-dimethylacetamide as examples) is the same as with aqueous solutions: the same signal and noise is obtained for a given electric conductance of the background electrolyte, independent of the kind of the solvent. Therefore CCD enables the extension of the application range to solvents with restricted use for common UV detection in CZE due to their unfavourable or even unfitting optical properties. The applicability of CCD is demonstrated by CZE of aliphatic ammonium compounds in these solvents.

Acetamides↗
PubMed2001

Electrokinetic chromatography with micelles, polymeric and monomeric additives with similar chemical functionality as pseudo-stationary phases.

A comparison is made of the retention properties of additives applied as positively charged pseudo-stationary phases for electrokinetic chromatography of neutral analytes. All additives have a quaternary ammonium as functional group. The polymeric additive [poly(N,N,N',N'-tetramethyl-N-trimethylenehexamethylenediammonium), Polybrene] has a concentration of 2% (w/w) in the background electrolyte (acetate, pH 5.2). Monomeric octyltrimethylammonium (OTMA) was used at a concentration below or above its critical micelle concentration (CMC) (140 mmol/l). At a concentration (259 mmol/l) above the CMC the system is that normally used for micellar electrokinetic chromatography with cationic micelles. However, even below the CMC, where OTMA is present as monomer, retention of the neutral analytes is observed as well. In all systems coating of the capillary wall with Polybrene establishes an electroosmotic flow directed towards the anode, counter-migrating to the electrophoretic movement of the additive. Based on the measurement of the mobility of the analytes (15 small, monofunctional aromatic compounds with different functional groups), their capacity factors, k(i), were determined in all systems. Low correlation of the k(i) values is observed between the particular systems, indicating their different selectivity at least for individual pairs of analytes. Based on the log k(i) values, a linear free energy relationship was applied to elucidate the main types of chemical interaction responsible for retention. As a result, cavity formation and n or pi electron interactions were found being significant for the micellar OTMA system, which agrees with findings described in the literature for other (cationic and anionic) micellar systems. For the polymeric system and for the monomeric OTMA system, the significant retention parameter is indicating n and pi electron interactions.

Chromatography, Micellar Electrokinetic Capillary↗
PubMed2001

Separation of olanzapine, carbamazepine and their main metabolites by capillary electrophoresis with pseudo-stationary phases.

Conditions were worked out for the separation of carbamazepine, olanzapine, and their main metabolites carbamazepine 10,11-epoxide, 10-hydroxycarbamazepine, and desmethylolanzapine. The separation was based on electrokinetically driven methods in the capillary format. The main difficulty in separating these compounds is related to their different chemical classes. Whereas the carbamazepine members are amides, and are electrically neutral, the olanzapine members have aliphatic amino groups and are thus cationic under most experimental conditions. Different additives were applied as pseudo-stationary phases to implement selectivity. Poly(diallyldimethylammonium), PDADMA, is a polycationic replaceable and soluble polymer, that interacts mainly according to the polarisability of the analyte molecules. The MEKC principle was applied with the common SDS as micelle former. In both systems, only partial resolution of the analytes was obtained. The most favorable system consisted of a charged, oligomeric additive: full separation of all analytes within 4 min was achieved with heptakis-6-sulfato-beta-cyclodextrin (7 mM) in 30 mM borate buffer, pH 8.5.

Antipsychotic Agents↗
PubMed2001

VLDL receptor fragments of different lengths bind to human rhinovirus HRV2 with different stoichiometry. An analysis of virus-receptor complexes by capillary electrophoresis.

The formation of complexes between the minor receptor group human rhinovirus HRV2 and two recombinant soluble receptor fragments derived from the human very low density lipoprotein receptor (VLDLR) and containing ligand-binding repeats 1-3 (MBP.VLDLR(1-3)) or 1-8 (MBP.VLDLR(1-8)) fused to the carboxyl terminus of the maltose-binding protein was analyzed by affinity capillary electrophoresis. At low molar ratios of receptor/virus, the peaks corresponding to substoichiometric complexes were broad indicating heterogeneity. When the receptors were present in molar excess with respect to the virus, the peaks were sharp, suggesting saturation of all binding sites. For the determination of the stoichiometry, constant amounts of receptor were incubated with increasing amounts of virus, and the peak areas corresponding to free receptor were measured and plotted versus total virus concentration. Extrapolation of the linear part of the resulting curve to zero concentration of free receptor enabled quantitation of the molar ratios of the components present in the complex. Using this method, we determined that about 60 molecules of MBP.VLDLR(1-3) but only about 30 molecules of MBP.VLDLR(1-8) were bound per virion.

Binding Sites↗
PubMed2001

Capillary zone electrophoresis of basic analytes in methanol as non-aqueous solvent mobility and ionisation constant.

The electrophoretically relevant properties of monoacidic 21 bases (including common drugs) containing aliphatic or aromatic amino groups were determined in methanol as solvent. These properties are the actual mobilities (that of the fully ionised weak bases), and their pKa values. Actual mobilities were measured in acidic methanolic solutions containing perchloric acid. The ionisation constants of the amines were derived from the dependence of the ionic mobilities on the pH of the background electrolyte solution. The pH scale in methanol was established from acids with known conventional pK*a values in this solvent used as buffers, avoiding thus further adjustment with a pH sensitive electrode that might bias the scale. Actual mobilities in methanol were found larger than in water, and do not correlate well with the solvent's viscosity. The pK*a values of the cation acids, HB-, the corresponding form of the base, B, are higher in methanol, whereas a less pronounced shift was found than for neutral acids of type HA. The mean increase (compared to pure aqueous solution) for aliphatic ammonium type analytes is 1.8, for substituted anilinium 1.1, and for aromatic ammonium from pyridinium type 0.5 units. The interpretation of this shift was undertaken with the concept of the medium effect on the particles involved in the acid-base equilibrium: the proton, the molecular base, B, and the cation HB+.

Electrophoresis, Capillary↗
PubMed2001

Resolution in capillary electrophoresis with nonaqueous methanol as solvent: theoretical prediction and experimental confirmation.

The resolution of the analytes was predicted from their known pKa* values and actual mobilities in nonaqueous methanolic solutions according to theory taking longitudinal diffusion as the only cause for peak dispersion. This leads to an equation of the resolution as a function of the pH*, as both selectivity and efficiency are dependent on the pH of the buffer. The experimentally obtained resolution values were in acceptable agreement with the predicted theoretical ones in most cases. This was demonstrated for substituted benzoic acids as analytes. The pKa* values needed for the calculation of the resolution were derived from the pH* dependence of the effective mobility. The pH* scale in methanol was based on conventional pKa* values of acetic acid and chloroacetic acid taken from the literature.

Benzoates↗
PubMed2001

Identification of plant and animal glues in museum objects by GC-MS, after catalytic hydrolysis of the proteins by the use of a cation exchanger, with simultaneous separation from the carbohydrates.

A method is described which enables the group-separation of proteinaceous binding media from vegetable glues (carbohydrates), and simultaneous hydrolysis of the proteins in mixtures of both. The mixtures of the binders are suspended in aqueous-ethanolic solvent with the H+ form of a strong cation exchanger and treated at elevated temperature in sealed vials. The polypeptides are cleaved by H+-catalysed hydrolysis. On abstraction the amino acids are transformed into the ammonium ions by the protons, and the cations are adsorbed by the exchanger resin. The amino acids are removed from solution in this way, thus suppressing interfering reactions with other binders, e.g. humin formation with carbohydrates. Clear and colourless solutions were obtained with all mixtures of vegetable and animal glues. Two fractions can be obtained after separation of the solid resin from the liquid supernatant - the resin fraction with the adsorbed amino acids, and the aqueous-ethanolic solution with the carbohydrates. In each of these fractions the two classes of binder can be identified separately by GC-MS; this avoids the occurrence of unresolved GC peaks and superimposed mass spectra. The method has been used to identify the binder found between fabric layers of a Burgundian liturgical vestment of the Order of the Golden Fleece from the first half of the 15th century, the Cope of the Virgin Mary. With the aid of the GC pattern obtained, and the mass spectra of the main peaks, which were identified as glucopyranose anomers, the binding medium was identified as starch.

Adhesives↗
PubMed2000

Comparison of separation selectivity in capillary electrokinetic chromatography using a cationic linear polymeric pseudo-stationary phase or monomeric additives of similar structure.

The retention properties in electrically driven systems with monomeric additives were compared to an electrokinetic chromatographic system with a linear, charged polymer of similar chemical structure (all additives are quaternary tetraalkyl ammonium ions). The monomeric additives were tetramethylammonium (TMA), tetraethylammonium (TEA) and dimethylpyrrolidinium (DMP), respectively, the polymeric additive was poly(diallyldimethyl)ammonium (PDADMA). The additive concentration in the background electrolyte was 2 and 4% (w/w). The retention characteristics were based on the apparent mobilities of 10 non-charged analytes with different chemical functionality, which were transported by the anodic electroosmotic flow in the dynamically coated capillary, and retained by the counter-flowing cationic additives. From these data capacity factors were derived, which ranged up to 0.8. Association constants were calculated, and were found between 10 and 170. Roughly, the association constants increased for a given analyte in the sequence TMA<TEA<DMP< PDADMA. However, changes in the retention order were observed for some cases, reflecting the different selectivity of the particular systems for certain pairs of analytes. A general advantage of polymeric pseudo-stationary phases compared to monomeric additives is given by the negligible reduction of the mobility of the analyte-polymer associate in relation to the free additive ion, resulting in a broader retention window under most practical conditions.

Chromatography, Micellar Electrokinetic Capillary↗
PubMed2000

Affinity capillary electrophoresis for the assessment of complex formation between viruses and monoclonal antibodies.

The formation of complexes of human rhinovirus (serotype HRV2 and HRV14) with nonaggregating neutralizing monoclonal antibodies was investigated by affinity capillary electrophoresis. The method is based on preincubation of virus with antibody, followed by CE analysis. At low antibody-to-virus ratios, peaks corresponding to the complexes were broad, pointing to the presence of a heterogeneous population of virions with various numbers of antibodies bound; at a high molar ratio between virus and antibody, the peak became narrow again, indicating saturation of the 60 equivalent viral epitopes with the antibodies being attached bivalently. As SDS was used as an additive in the background electrolyte to allow for separation, its influence on complex formation was investigated. Once formed, HRV2-antibody complexes were found to be stable in the presence of the detergent but complex formation in buffer containing SDS was severely impaired. HRV14-antibody complexes were rapidly dissociated by SDS. The method proved to be useful for a rapid assessment of complex formation and might allow for an estimation of the binding stoichiometry.

Antibodies, Monoclonal↗
PubMed2000

Capillary electrophoresis with postcolumn infectivity assay for the analysis of different serotypes of human rhinovirus (common cold virus).

Differentiation of virus serotypes with capillary zone electrophoresis was demonstrated. For four serotypes of human rhinovirus (HRV2, HRV14, HRV16, HRV49), different electrophoretic mobility was achieved at pH 8.3 (borate/boric acid buffer, 100 mmol/L). Addition of detergent (Triton X-100-R, deoxycholate, and/or SDS) to the background electrolyte was required for reduction of wall adsorption and improvement of peak shape. A major nonviral contaminant, present in all virus samples, was best separated from the viral peaks with 10 mmol/L SDS as additive. The method allowed detecting serotypes HRV16 and HRV49 in crude, partially purified virus preparations. An infectivity assay carried out off-line with fractions collected at the capillary outlet enabled the sensitive and biospecific identification of the peaks of HRV2 and HRV14.

Electrophoresis, Capillary↗
PubMed2000

Capillary electrokinetic chromatography with charged linear polymers as a nonmicellar pseudostationary phase: determination of capacity factors and characterization by solvation parameters.

A permanent polycation, polydiallyldimethylammonium (PDADMA), is applied as a linear, polymeric, replaceable, and nonmicellar pseudostationary phase for the separation of neutral analytes by capillary electrokinetic chromatography. It is shown that this polymer used in the background electrolyte is able to separate the analytes even if it does not form micelles under the given conditions. The most favorable aspect for practical use lays in the simple replacement of the separation media after each run, thus generating highly reproducible conditions. To determine the capacity factors of the analytes, a new method, based on an isotachophoretic regime, has been introduced for the measurement of the electrophoretic mobility of the polymeric pseudo-stationary phase. The capacity factors in the separation system, derived from the mobilities of the polymer, the electroosmotic flow, and the mobilities of 15 individual aromatic analytes, range between 0.3 and 1.2 for the given separation media (aqueous solution of acetate buffer, pH 5.2, with 4% w/w PDADMA). The type of interaction in the pseudochromatographic system was clarified from solvation parameters based on the linear free energy relationship model. It was found that pi and n electron interactions and hydrogen-bond basicity of the polymer, as compared with the aqueous bulk phase, are the main cause of retention of the analytes.

Benzene Derivatives↗
PubMed2000

Diffusion coefficient and capacity factor in capillary electrokinetic chromatography with replaceable charged polymeric pseudophase.

Apparent diffusion coefficients, Dapp,i, were determined in solutions with a polycationic additive -- poly(diallyidimethylammonium) -- acting as a pseudostationary phase for electrokinetic chromatography. They were determined for six small neutral analytes at five concentrations of the polymeric additive (between 0 and 4% w/w) by a stopped migration method. The apparent diffusion coefficients decrease with increasing polymer concentration only within 40% maximum, an effect that cannot be associated with the macroscopic viscosity of the polymer solution (which increases by a factor of 10). The change of the apparent diffusion coefficients is related to the interaction of the neutral analyte molecules with the polyelectrolyte chain. Applying the model of analyte partitioning between "free" solution and polymer, capacity factors and partition constants were derived from the slope of the 1/Dapp,i vs. polymer concentration curves. Partition constants determined by this method (ranging between 40 and 170) agree with those obtained by electrokinetic chromatography.

Chromatography, Micellar Electrokinetic Capillary↗
PubMed2000

Recent innovation in capillary electrokinetic chromatography with replaceable charged pseudostationary phases or additives.

Recent developments of separation of neutral analytes in capillary systems with the mobile phase driven by the electroosmotic flow (EOF) and charged additives acting as a pseudostationary phase are reviewed. As pseudostationary phases a number of additives are used. Soluble polymers, either anionic or cationic, were applied as alternatives to micelles. Monomeric charged additives are also intended to form associates with the analytes, leading to selective retention and separation in a similar way as the polymeric pseudostationary phases. Dendrimers, spherical macromolecules with highly branched chains and charged terminal groups, are successfully applied for the separation of lipophilic analytes. Polymers with covalently stabilized structures are introduced in the form of permanent micelles and are therefore insensitive to the mobile phase composition, enlarging the applicability of micellar electrokinetic capillary chromatography (MEKC).

Chemistry, Organic↗
PubMed2000

Dispersive phenomena in electromigration separation methods.

A review on dispersive effects and on peak broadening in electromigration separation methods (capillary electrophoresis and electrochromatography) is presented, mainly covering papers published between the beginning of 1997 and the beginning of 2000. Most attention is drawn to work dealing with nonlinear effects that cause anomalous electromigration dispersion in electrolyte systems with two or multiple coions. Further, topics cover the comparison of electroosmotic and pressure-driven modes in electrochromatography, dispersive effects due to nonhomogeneous velocity fields in packed electrochromatography columns, to nonuniform electroosmotic flow, to sorption of analytes (mainly proteins) at the column wall or the stationary phase, and due to the influence of the nonideal column geometry like coiling or irregularities in shape.

Adsorption↗