Biomedical subjects

E Pohl

Publications and source records attributed to E Pohl.

At least 19 recordsLinked to original sources

PubMed2006

The PILATUS 1M detector.

The PILATUS 1M detector is a hybrid pixel array detector with over one million pixels that operate in single photon counting mode. The detector, designed for macromolecular crystallography, is the largest pixel array detector currently in use at a synchrotron. It is a modular system consisting of 18 multichip modules covering an area of 21 cm x 24 cm. The design of the components as well as the manufacturing of the detector including the bump-bonding was performed at the Paul Scherrer Institute (PSI). The use of a single photon counting detector for protein crystallography requires detailed studies of the charge collection properties of the silicon sensor. The 18 modules are read out in parallel, leading to a full frame readout-time of 6.7 ms. This allows crystallographic data to be acquired in fine-varphi-slicing mode with continuous rotation of the sample. The detector was tested in several experiments at the protein crystallography beamline X06SA at the Swiss Light Source at PSI. Data were collected both in conventional oscillation mode using the shutter, as well as in a fine-varphi-slicing mode. After applying all the necessary corrections to data from a thaumatin crystal, the processing of the conventional data led to satisfactory merging R-factors of the order of 8.5%. This allows, for the first time, determination of a refined electron density map of a macromolecular biological crystal using a silicon pixel detector.

Crystallography, X-Ray↗

PubMed2004

Structure, function and evolution of the Archaeal class I fructose-1,6-bisphosphate aldolase.

FBPA (fructose-1,6-bisphosphate aldolase) catalyses the reversible aldol condensation of glyceraldehyde 3-phosphate and dihydroxyacetone phosphate to form fructose 1,6-bisphosphate. Two classes of FBPA, which rely on different reaction mechanisms, have so far been discovered, class I mainly found in Eucarya and class II mainly in Bacteria. Only recently were genes encoding proteins with FBPA activity identified in Archaea. Archaeal FBPAs do not share any significant overall sequence identity with members of the traditional classes of FBPAs, raising the interesting question of whether they have evolved independently by convergent evolution or diverged from a common ancestor. Biochemical characterization of FBPAs of the two hyperthermophilic Archaea Thermoproteus tenax and Pyrococcus furiosus showed that the enzymes use a Schiff-base mechanism and thus belong to the class I aldolases. The crystal structure of the archaeal FBPA from T. tenax revealed that the protein fold, as for the classical FBPA I and II, is that of a parallel (betaalpha)(8) barrel. A substrate-bound crystal structure allowed detailed active-site comparisons which showed the conservation of six important catalytic and substrate-binding residues between the archaeal and the classical FBPA I. This observation provides further evidence that the two sequence families of proteins share a common evolutionary origin. Furthermore, structure and sequence analysis indicate that the class I FBPA shares a common evolutionary origin with several other enzyme superfamilies of the (betaalpha)(8) barrel fold.

Aeropyrum↗

PubMed2003

The TB structural genomics consortium: a resource for Mycobacterium tuberculosis biology.

The TB Structural Genomics Consortium is an organization devoted to encouraging, coordinating, and facilitating the determination and analysis of structures of proteins from Mycobacterium tuberculosis. The Consortium members hope to work together with other M. tuberculosis researchers to identify M. tuberculosis proteins for which structural information could provide important biological information, to analyze and interpret structures of M. tuberculosis proteins, and to work collaboratively to test ideas about M. tuberculosis protein function that are suggested by structure or related to structural information. This review describes the TB Structural Genomics Consortium and some of the proteins for which the Consortium is in the progress of determining three-dimensional structures.

Amino Acid Sequence↗

PubMed2001

Crystallization of redox-insensitive Oct1 POU domain with different DNA-response elements.

The POU domain of the human Oct1 transcription factor has been crystallized with two different POU-dimer-binding DNA elements. Protein-DNA cocrystals suitable for structural analysis could be obtained only with a redox-insensitive version of the POU domain. The recombinant protein expression in a prokaryotic host was adjusted for fast purification. Optimized crystals were obtained by systematically varying the length of the oligonucleotide and by modifying cryofreezing procedures. These steps are generally applicable to the preparation of protein-DNA complexes for structural studies.

Crystallization↗

PubMed2001

Overview of the tunable beamlines for protein crystallography at the EMBL Hamburg Outstation; an analysis of current and future usage and developments.

The EMBL Hamburg Outstation currently operates two tunable protein crystallography beamlines suitable for single and multiple anomalous diffraction (SAD/MAD) experiments. The first beamline, designated X31, is located on a bending magnet of the DORIS III storage ring whereas the second beamline, BW7A, is positioned at a multipole wiggler at the same storage ring. X31 is equipped with an energy stabilization device to ensure constant wavelength during longer data-collection periods. The in-house built crystallographic end-station is now equipped with a Mar345 imaging-plate scanner as a detector. The wiggler beamline BW7A features a novel sagitally focusing monochromator. The end-station used here has also been developed and built in-house. The beamline is currently operated with a Mar 165 CCD detector. In this paper the hardware and software developments of the last years will be summarized and the outlook for substantial upgrades will be given. The future plans include the design and construction of a third tunable beamline, designated X12, for protein crystallography. The development of automated beamlines for protein crystallography is of particular importance with respect to structural genomics initiatives. The analysis of the projects of the last years shows the wide range of anomalous scatterer used on the tunable beamlines thus demonstrating the need of a wide range of accessible energies and fast and reliable energy changes.

Crystallography↗

PubMed2001

Structures of three diphtheria toxin repressor (DtxR) variants with decreased repressor activity.

The diphtheria toxin repressor (DtxR) from Corynebacterium diphtheriae regulates the expression of the gene on corynebacteriophages that encodes diphtheria toxin (DT). Other genes regulated by DtxR include those that encode proteins involved in siderophore-mediated iron uptake. DtxR requires activation by divalent metals and holo-DtxR is a dimeric regulator with two distinct metal-binding sites per three-domain monomer. At site 1, three side chains and a sulfate or phosphate anion are involved in metal coordination. In the DtxR-DNA complex this anion is replaced by the side chain of Glu170 provided by the third domain of the repressor. At site 2 the metal ion is coordinated exclusively by constituents of the polypeptide chain. In this paper, five crystal structures of three DtxR variants focusing on residues Glu20, Arg80 and Cys102 are reported. The resolution of these structures ranges from 2.3 to 2.8 A. The side chain of Glu20 provided by the DNA-binding domain forms a salt bridge to Arg80, which in turn interacts with the anion. Replacing either of the salt-bridge partners with an alanine reduces repressor activity substantially and it has been inferred that the salt bridge could possibly control the wedge angle between the DNA-binding domain and the dimerization domain, thereby modulating repressor activity. Cys102 is a key residue of metal site 2 and its substitution into a serine abolishes repressor activity. The crystal structures of Zn-Glu20Ala-DtxR, Zn-Arg80Ala-DtxR, Cd-Cys102Ser-DtxR and apo-Cys102Ser-DtxR in two related space groups reveal that none of these substitutions leads to dramatic rearrangements of the DtxR fold. However, the five crystal structures presented here show significant local changes and a considerable degree of flexibility of the DNA-binding domain with respect to the dimerization domain. Furthermore, all five structures deviate significantly from the structure in the DtxR-DNA complex with respect to overall domain orientation. These results confirm the importance of the hinge motion for repressor activity. Since the third domain has often been invisible in previous crystal structures of DtxR, it is also noteworthy that the SH3-like domain could be traced in four of the five crystal structures.

Bacterial Proteins↗

PubMed2001

The structure of the chloroplast F1-ATPase at 3.2 A resolution.

The structure of the F(1)-ATPase from spinach chloroplasts was determined to 3.2 A resolution by molecular replacement based on the homologous structure of the bovine mitochondrial enzyme. The crystallized complex contains four different subunits in a stoichiometry of alpha(3)beta(3)gammaepsilon. Subunit delta was removed before crystallization to improve the diffraction of the crystals. The overall structure of the noncatalytic alpha-subunits and the catalytic beta-subunits is highly similar to those of the mitochondrial and thermophilic subunits. However, in the crystal structure of the chloroplast enzyme, all alpha- and beta-subunits adopt a closed conformation and appear to contain no bound adenine nucleotides. The superimposed crystallographic symmetry in the space group R32 impaired an exact tracing of the gamma- and epsilon-subunits in the complex. However, clear electron density was present at the core of the alpha(3)beta(3)-subcomplex, which probably represents the C-terminal domain of the gamma-subunit. The structure of the spinach chloroplast F(1) has a potential binding site for the phytotoxin, tentoxin, at the alphabeta-interface near betaAsp(83) and an insertion from betaGly(56)-Asn(60) in the N-terminal beta-barrel domain probably increases the thermal stability of the complex. The structure probably represents an inactive latent state of the ATPase, which is unique to chloroplast and cyanobacterial enzymes.

Animals↗

PubMed2001

Differential dimer activities of the transcription factor Oct-1 by DNA-induced interface swapping.

Two crystal structures of Oct-1 POU domain bound to DNA provide a rationale for differential, conformation-dependent recruitment of transcription cofactors. The POU-homeo and POU-specific subdomains of Oct-1 contain two different nonoverlapping pairs of surface patches that are capable of forming unrelated protein-protein interfaces. Members of the POU factor family contain one or two conserved sequence motifs in the interface that are known to be phosphorylated, as noted for Oct-1 and Pit-1. Modeling of Oct-4 reveals the unique case where the same conserved sequence is located in both interfaces. Our studies provide the basis for two distinct dimeric POU factor arrangements that are dictated by the architecture of each DNA response element. We suggest interface swapping in dimers could be a general mechanism of modulating the activity of transcription factors.

Amino Acid Sequence↗

PubMed2001

The three-dimensional structure of cystathionine beta-lyase from Arabidopsis and its substrate specificity.

The pyridoxal 5'-phosphate-dependent enzyme cystathionine beta-lyase (CBL) catalyzes the penultimate step in the de novo biosynthesis of Met in microbes and plants. Absence of CBL in higher organisms makes it an important target for the development of antibiotics and herbicides. The three-dimensional structure of cystathionine beta-lyase from Arabidopsis was determined by Patterson search techniques, using the structure of tobacco (Nicotiana tabacum) cystathionine gamma-synthase as starting point. At a resolution of 2.3 A, the model was refined to a final crystallographic R-factor of 24.9%. The overall structure is very similar to other pyridoxal 5'-phosphate-dependent enzymes of the gamma-family. Exchange of a few critical residues within the active site causes the different substrate preferences between Escherichia coli and Arabidopsis CBL. Loss of interactions at the alpha-carboxyl site is the reason for the poorer substrate binding of Arabidopsis CBL. In addition, the binding pocket of Arabidopsis CBL is larger than that of E. coli CBL, explaining the similar binding of L-cystathionine and L-djenkolate in Arabidopsis CBL in contrast to E. coli CBL, where the substrate binding site is optimized for the natural substrate cystathionine.

Amino Acid Sequence↗

PubMed2000

Ab initio structure determination of the lantibiotic mersacidin.

The crystal structure of mersacidin, a potential novel antibiotic against methicillin- and vancomycin-resistant Staphylococcus aureus strains, has been determined by ab initio methods. Despite all crystals being merohedrally twinned, an accurate structural model with an R value of 13.4% has been obtained at atomic resolution. With six molecules in the asymmetric unit and no atom heavier than sulfur, the structure corresponds to a protein of 120 amino acids and is the largest approximately equal-atom unknown structure solved by direct methods. In the crystal, the molecule assumes a compact fold different from that found by NMR in solution. Comparison of the NCS-related molecules reveals regions of variable flexibility. The region highly homologous to the related antibiotic actagardine is very rigid and possibly defines an essential building block of this class of new antibacterial substances.

Alanine↗

PubMed1999

Crystal structure of a cobalt-activated diphtheria toxin repressor-DNA complex reveals a metal-binding SH3-like domain.

The diphtheria toxin repressor (DtxR) is the prototype of a family of iron-dependent regulator (IdeR) proteins, which are activated by divalent iron and bind DNA to prevent the transcription of downstream genes. In Corynebacterium diphtheriae, DtxR regulates not only the expression of diphtheria toxin encoded by a corynebacteriophage, but also of components of the siderophore-mediated iron-transport system. Here we report the crystal structure of wild-type DtxR, a 226 residue three-domain dimeric protein, activated by cobalt and bound to a 21 bp DNA duplex based on the consensus operator sequence. Two DtxR dimers surround the DNA duplex which is distorted compared to canonical B -DNA. The SH3-like third domain interacts with the metal at site 1 via the side-chains of Glu170 and Gln173, revealing for the first time a metal-binding function for this class of domains. The SH3-like domain is also in contact with the DNA-binding first domain and with the second, or dimerization, domain. The DNA-binding helices in the first domain are shifted by 3 to 5 A when compared to the apo-repressor, and fit into the major groove of the duplex bound. These shifts are due to a hinge-binding motion of the DNA-binding domain with respect to the dimerization domains of DtxR. The third domain might play a role in regulating this hinge motion.

Bacterial Proteins↗

PubMed1999

A rapid method for positioning small flexible molecules, nucleic acids, and large protein fragments in experimental electron density maps.

A Monte Carlo procedure, encoded in the program Blob, has been developed and tested for the purpose of positioning large molecular fragments or small flexible molecules in electron density maps. The search performed by the algorithm appears to be sufficiently thorough to accurately position a small flexible ligand in well-defined density while remaining sufficiently random to offer interesting alternate suggestions for density representing disordered binding modes of a ligand. Furthermore, the algorithm is shown to be efficient enough to accurately position large rigid molecular fragments. In the first of the test cases with large molecular fragments, Blob was surprisingly effective in positioning a poly-alanine model of a 53-residue domain in poor electron density resulting from molecular replacement with a partial model. At 3.0 A resolution the domain was positioned consistently within 0.2 A of its experimentally determined position. Even at 6.0 A resolution Blob could consistently position the domain to within 0.75 A of its actual position. A second set of tests with large molecular fragments revealed that Blob could correctly position large molecular fragments with quite significant deviations from the actual structure. In this test case, fragments ranging from a 170-residue protein domain with a 3.8 A rms deviation from the actual structure to a 22-base pair ideal B-form DNA duplex were positioned accurately in a 3.2 A electron density map derived from multiple isomorphous replacement methods. Even when decreasing the quality of the maps, from a figure of merit of 0.57 to as low as 0. 35, Blob could still effectively position the large protein domain and the DNA duplex. Since it is efficient, can handle large molecular fragments, and works in poor and low resolution maps, Blob could be a useful tool for interpreting electron density maps in de novo structure determinations and in molecular replacement studies. Proteins 1999;36:512-525.

Algorithms↗

PubMed1999

A database method for automated map interpretation in protein crystallography.

A significant portion of new protein structures contain folds that are related to those seen before. During the development of a computer program that can accurately position, in electron density maps, large protein domains with large structural deviations, it became apparent that the redundancy in protein folds could be used in a non trivial manner during a protein structure determination. As a result a computational procedure, Database Assisted Density Interpretation (DADI), was developed and tested to aid in the building of models in protein crystallography and to assist in interpreting electron density maps. The initial tests of the DADI procedure using a small database of protein domains are described. The philosophy is to first work with entire domains then with the secondary structure elements of these domains and finally with individual residues of the secondary structure elements via Monte Carlo, "chopping" and "clipping" procedures, respectively. The first test case was a traceable 3.2 A multiple isomorphous replacement with anomalous scattering (MIRAS) electron density map of a human topoisomerase I-DNA complex. The second test case uses poor electron density for the third domain of the diphtheria toxin repressor resulting from a molecular replacement solution with the first two domains. Despite the fact that a fairly small database was employed in these test cases, the DADI procedure was able to find a large portion of the protein backbone with very few errors. In the first case nearly 45% of the backbone and more than 80% of the secondary structure was placed automatically. In the second test case nearly 50% of the third domain was automatically detected. A particular encouraging result was that in both cases more than 75% of the beta sheet secondary structure was found automatically by the DADI procedure. Clearly, the procedures employed are promising avenues to exploit the current explosion of protein structures for the determination of future structures. Proteins 1999;36:526-541.

Algorithms↗

PubMed1999

Absolute configurations of Emycin D, E and F; mimicry of centrosymmetric space groups by mixtures of chiral stereoisomers.

The crystal structures of Emycin E (1), di-o-bromobenzoyl-Emycin F (2) and o-bromobenzoyl-Emycin D (3) have been determined by X-ray analysis at low temperature. Emycin E and o-bromobenzoyl-Emycin D both crystallize with two molecules in a triclinic unit cell. These two structures can be solved and refined either in the centrosymmetric space group P1;, with apparent disorder localized at or around the expected chiral centre, or in the non-centrosymmetric space group P1 as mixtures of two diastereomers without disorder. Only the latter interpretation is consistent with the chemical and spectroscopic evidence. Refinements in the centrosymmetric and non-centrosymmetric space groups are compared in this paper and are shown to favour the chemically correct interpretation, more decisively so in the case of the bromo derivative as a result of the anomalous dispersion of bromine. Structures (1) and (3) provide a dramatic warning of the dangers inherent in the conventional wisdom that if a structure can be refined satisfactorarily in both centrosymmetric and non-centrosymmetric space groups, the former should always be chosen. In these two cases, despite apparently acceptable intensity statistics and R factors (5.87 and 3.55%), the choice of the centrosymmetric space group leads to the serious chemical error that the triclinic unit cell contains a racemate rather than two chiral diastereomers! The weakest reflections are shown to be most sensitive to the correct choice of space group, underlining the importance of refining against all data rather than against intensities greater than a specified threshold. The use of similar-distance restraints is shown to be beneficial in both P1 refinements. Di-o-bromobenzoyl-Emycin F crystallizes in the monoclinic space group P2(1) with one molecule in the asymmetric unit and so does not give rise to these problems of interpretation. The absolute configuration of the two bromo derivatives, and hence the Emycins in general, was determined unambiguously as S at the chiral centre C3.

Journal Article↗

PubMed1999

Crystal structure of the iron-dependent regulator (IdeR) from Mycobacterium tuberculosis shows both metal binding sites fully occupied.

Iron-dependent regulators are a family of metal-activated DNA binding proteins found in several Gram-positive bacteria. These proteins are negative regulators of virulence factors and of proteins of bacterial iron-uptake systems. In this study we present the crystal structure of the iron-dependent regulator (IdeR) from Mycobacterium tuberculosis, the causative agent of tuberculosis. The protein crystallizes in the hexagonal space group P62 with unit cell dimensions a=b=92.6 A, c=63.2 A. The current model comprises the N-terminal DNA-binding domain (residues 1-73) and the dimerization domain (residues 74-140), while the third domain (residues 141-230) is too disordered to be included. The molecule lies on a crystallographic 2-fold axis that generates the functional dimer. The overall structure of the monomer shares many features with the homologous regulator, diphtheria toxin repressor (DtxR) from Corynebacterium diphtheriae. The IdeR structure in complex with Zinc reported here is, however, the first wild-type repressor structure with both metal binding sites fully occupied. This crystal structure reveals that both Met10 and most probably the Sgamma of Cys102 are ligands of the second metal binding site. In addition, there are important changes in the tertiary structure between apo-DtxR and holo-IdeR bringing the putative DNA binding helices closer together in the holo repressor. The mechanism by which metal binding may cause these structural changes between apo and holo wild-type repressor is discussed.

Bacterial Proteins↗

PubMed1999

1.7 A structure of the stabilized REIv mutant T39K. Application of local NCS restraints.

The X-ray structure of the T39K mutant of the variable domain of a human immunoglobulin kappa light chain has been determined at room temperature to 1.7 A resolution with a conventional R factor of 0. 182. T39K crystallizes in the triclinic space group P1 [a = 35.4 (1), b = 40.1 (1), c = 43.1 (1) A, alpha = 66.9 (1), beta = 85.4 (1), gamma = 73.8 (1) degrees ]. The unit-cell contains two monomers, related by a non-crystallographic twofold axis. The use of a novel type of local non-crystallographic symmetry restraints on related isotropic displacement parameters and 1-4 distances as incorporated in the refinement program SHELXL improves the model and quality of the maps, but local differences between both monomers in areas subject to different packing contacts can still be observed. 12 overall anisotropic scaling parameters were refined. These may have compensated for the difficulties in accurately scaling single rotation axis image plate data from a triclinic crystal, because of the scarcity of common equivalent reflections. The final model has been used to perform a number of tests on anisotropic scaling, non-crystallographic symmetry, anisotropic refinement, determination of standard uncertainties and bulk solvent correction. It is remarkable that removal of the NCS restraints from the final model caused Rfree to increase. These tests clarify the strategies for optimum use of SHELXL for refinement at medium as opposed to atomic resolution.

Crystallography, X-Ray↗

PubMed1999

Anion-coordinating residues at binding site 1 are essential for the biological activity of the diphtheria toxin repressor.

The homodimeric diphtheria toxin repressor (DtxR) uses Fe2+ as a corepressor, binds to iron-regulated promoters, and negatively regulates the syntheses of diphtheria toxin, corynebacterial siderophore, and several other Corynebacterium diphtheriae products. The crystal structure of DtxR shows that the second domain of each monomer has two binding sites for Fe2+ or certain other divalent metal ions. In addition, site 1 binds a sulfate or phosphate anion, suggesting that phosphate may function intracellularly as a co-corepressor. The effects of alanine substitutions for selected residues in sites 1 and 2 were determined by measuring the beta-galactosidase activities of a tox operator/promoter-lacZ reporter construct in Escherichia coli strains expressing each DtxR variant. Our studies demonstrated that single alanine substitutions for the anion-binding residues in site 1 (R80A, S126A, or N130A) caused severely decreased DtxR activity, similar to the effects of alanine substitutions for metal-binding residues in site 2 (C102A, E105A, or H106A) and greater than the effects of alanine substitutions for metal-binding residues in site 1 (H79A, E83A, or H98A) reported previously by other investigators. Various combinations of alanine substitutions for site 1 and site 2 residues were also analyzed to further elucidate the roles of these cation- and anion-binding ligands in DtxR activity. Furthermore, the interaction between residue E20 in the DNA binding domain and R80 in anion/cation binding site 1 was analyzed, and the E20A variant of DtxR was shown to have a phenotype indistinguishable from that of the R80A variant. Our data demonstrated for the first time that the anion-binding residues R80, S126, and N130 at site 1 are essential for DtxR activity. The data also showed that the interaction of E20 in domain 1 with R80 in domain 2, first revealed by X-ray crystallography in apo-DtxR and holo-DtxR, is a structural feature of DtxR that is important for its repressor activity.

Amino Acid Substitution↗

PubMed1998

Motion of the DNA-binding domain with respect to the core of the diphtheria toxin repressor (DtxR) revealed in the crystal structures of apo- and holo-DtxR.

The diphtheria toxin repressor (DtxR) from Corynebacterium diphtheriae is a divalent metal-activated repressor of chromosomal genes that encode proteins responsible for siderophore-mediated iron uptake and also of the gene of certain corynebacteriophages that encodes diphtheria toxin. DtxR consists of two 25.3-kDa three-domain subunits and is a member of a family of related repressor proteins in several Gram-positive bacterial species, some of which are important human pathogens. In this paper, we report on the first high resolution crystal structures of apo-DtxR in two related space groups. In addition, crystal structures of Zn-DtxR were determined in the same two space groups. The resolutions of the structures range from 2.2 to 2.4 A. The four refined models of the apo- and the holo-repressor exhibit quite similar metal binding centers, which do, however, show higher thermal motion in the apo-structures. All four structures reported differ from each other in one important aspect. The N-terminal DNA-binding domain and the last 20 residues of the dimerization domain of each subunit move significantly with respect to the core of the DtxR dimer, which consists of residues 74-120 from both subunits. These results provide the first indication of a conformational change that may occur upon binding of the holo-repressor to DNA.

Bacterial Proteins↗