PubMed Health⌕ Search

Biomedical subjects

E Ruckenstein

Publications and source records attributed to E Ruckenstein.

At least 19 recordsLinked to original sources

Kinetic theory of nucleation based on a first passage time analysis: improvement by the density-functional theory.

A recent kinetic theory of nucleation [see, e.g., E. Ruckenstein and B. Nowakowski, J. Colloid Interface Sci. 137, 583 (1990)] is based on molecular interactions and avoids the traditional thermodynamics. The rate of emission of molecules from a cluster is found via a first passage time analysis. This time is calculated by solving the single-molecule master equation for the probability distribution function of a surface molecule located in the potential field created by the cluster. The liquid cluster was assumed to have sharp boundaries and uniform density. In the present paper, this assumption is removed by using the density-functional theory to find the density profiles. Thus, more accurate calculations of the potential field created by the cluster, its emission rate, and nucleation rate are obtained. The modified theory is illustrated by numerical calculations for a molecular pair interaction potential combining the dispersive attraction with the hard-sphere repulsion.

Journal Article↗

Recent developments in the kinetic theory of nucleation.

A review of recent progress in the kinetics of nucleation is presented. In the conventional approach to the kinetic theory of nucleation, it is necessary to know the free energy of formation of a new-phase particle as a function of its independent variables at least for near-critical particles. Thus the conventional kinetic theory of nucleation is based on the thermodynamics of the process. The thermodynamics of nucleation can be examined by using various approaches, such as the capillarity approximation, density functional theory, and molecular simulation, each of which has its own advantages and drawbacks. Relatively recently a new approach to the kinetics of nucleation was proposed [Ruckenstein E, Nowakowski B. J Colloid Interface Sci 1990;137:583; Nowakowski B, Ruckenstein E. J Chem Phys 1991;94:8487], which is based on molecular interactions and does not employ the traditional thermodynamics, thus avoiding such a controversial notion as the surface tension of tiny clusters involved in nucleation. In the new kinetic theory the rate of emission of molecules by a new-phase particle is determined with the help of a mean first passage time analysis. This time is calculated by solving the single-molecule master equation for the probability distribution function of a surface layer molecule moving in a potential field created by the rest of the cluster. The new theory was developed for both liquid-to-solid and vapor-to-liquid phase transitions. In the former case the single-molecule master equation is the Fokker-Planck equation in the phase space which can be reduced to the Smoluchowski equation owing to the hierarchy of characteristic time scales. In the latter case, the starting master equation is a Fokker-Planck equation for the probability distribution function of a surface layer molecule with respect to both its energy and phase coordinates. Unlike the case of liquid-to-solid nucleation, this Fokker-Planck equation cannot be reduced to the Smoluchowski equation, but the hierarchy of time scales does allow one to reduce it to the Fokker-Plank equation in the energy space. The new theory provides an equation for the critical radius of a new-phase particle which in the limit of large clusters (low supersaturations) yields the Kelvin equation and hence an expression for the macroscopic surface tension. The theory was illustrated with numerical calculations for a molecular pair interaction potential combining the dispersive attraction with the hard-sphere repulsion. The results for the liquid-to-solid nucleation clearly show that at given supersaturation the nucleation rate depends on the cluster structure (for three cluster structures considered-amorphous, fcc, and icosahedral). For both the liquid-to-solid and vapor-to-liquid nucleation, the predictions of the theory are consistent with the results of classical nucleation theory (CNT) in the limit of large critical clusters (low supersaturations). For small critical clusters the new theory provides higher nucleation rates than CNT. This can be accounted for by the fact that CNT uses the macroscopic interfacial tension which presumably overpredicts the surface tension of small clusters, and hence underpredicts nucleation rates.

Kinetics↗

Solubility of hydrophobic organic pollutants in binary and multicomponent aqueous solvents.

The present paper deals with the application of fluctuation theory of solutions to the solubility of poorly soluble substances of environmental significance in aqueous mixed solvents. The fluctuation theory of ternary solutions was first used to derive an expression for the activity coefficient of a solute at infinite dilution in a binary mixed solvent. This equation contains the activity coefficients of the constituents of the solute-free mixed solvent and the molar volume of the solute-free mixed solvent. Further, the derived expression for the activity coefficient of a solute at infinite dilution was used to generate a number of expressions for the solubility of solids in aqueous mixed solvents. Several expressions for the activity coefficients of the components were considered: first, the mixed solvent was considered an ideal mixture; second, the activity coefficients of the constituents of the binary solvent were expressed using the two-suffix Margules equations; third, the activity coefficients of the constituents of the binary solvent were expressed using the Wilson equations. The obtained expressions were applied to 25 experimental data sets pertaining to the solubilities of hydrophobic organic pollutants (HOP) in aqueous mixed solvents. It was found that the suggested equations can be used for an accurate and reliable correlation of the solubilities in aqueous mixed binary solvents. The best results were obtained by combining our expression for the activity coefficient of a solute at infinite dilution in a mixed solvent with the Wilson equations for the activity coefficients of the constituents of a solute-free mixed solvent. The derived equations can also be used for predicting the solubilities of poorly soluble environmentally important compounds in aqueous mixed solvents using for the Wilson parameters those obtained from vapor-liquid equilibrium data. A similar methodology was applied to the solubility of poorly soluble substances of environmental significance in multicomponent (ternary and higher) aqueous mixed solvents. The expression for the activity coefficient of a solute in an ideal multicomponent mixed solvent was used to derive an equation for the solubility of a poorly soluble solute in an ideal multicomponent mixed solvent in terms of its solubilities in two subsystems of the multicomponent solvent and their molar volumes. Ultimately the solubility could be expressed in terms of those in binary or even in the individual constituents of the solvent and their molar volumes. The computational method was applied to predict the solubilities of naphthalene and anthracene in ternary, quaternary and quinary aqueous mixed solvents. The results were compared with experiment and good agreement was obtained.

Models, Theoretical↗

Solubility of drugs in aqueous solutions. Part 5. Thermodynamic consistency test for the solubility data.

This paper is devoted to the verification of the quality of experimental data regarding the solubility of sparingly soluble solids, such as drugs, environmentally important substances, etc. in mixed solvents. A thermodynamic consistency test based on the Gibbs-Duhem equation for ternary mixtures is suggested. This test has the form of an equation, which connects the solubilities of the solid, and the activity coefficients of the constituents of the solute-free mixed solvent in two mixed solvents of close compositions. The experimental data regarding the solubility of sparingly soluble substances can be verified with the suggested test if accurate data for the activity coefficients of the constituents of the solute-free mixed solvent are available. The test was applied to a number of systems representing the solubilities of sparingly soluble substances in mixed solvents. First, the test was scrutinized for four nonaqueous systems for which accurate solubility data were available. Second, the suggested test was applied to a number of systems representing experimental data regarding the solubility of sparingly soluble substances in aqueous mixed solvents.

Anthracenes↗

Surface modification and functionalization through the self-assembled monolayer and graft polymerization.

The modification of a surface at the molecular level with precise control of the building blocks generates an integrated molecular system. This field has progressed rapidly in recent years through the use of self-assembled monolayer (SAM) interfaces. Recent developments on surface-initiated chemical reactions, functionalization, and graft polymerization on SAM interfaces are emphasized in the present review. A number of surface modifications by grafting are reviewed. The grafting of polyaniline on a glass surface, previously modified with a silane self-assembled monolayer (SAM), is examined in detail for both planar and 3-D systems, such as fibers, nanoparticles, and even polymer patterned surfaces. We also discuss the graft polymerization of water-soluble polymers on the surface of silicon nanoparticles, which generate stable aqueous colloidal solutions and have numerous applications. Finally, we compare and review some surface-modification techniques on the surfaces of polymers, such as two-solvent entrapment, polymer blending, and chemical grafting, which improve their biocompatibility.

Aniline Compounds↗

Solubility of drugs in aqueous solutions. Part 4. Drug solubility by the dilute approximation.

As in our previous publications in this journal [Int. J. Pharm. 258 (2003a) 193; Int. J. Pharm. 260 (2003b) 283; Int. J. Pharm. 267 (2003c) 121], this paper is concerned with the solubility of poorly soluble drugs in aqueous mixed solvents. In the previous publications, the solubilities of drugs were assumed to be low enough for the so-called infinite dilution approximation to be applicable. In contrast, in the present paper, the solubilities are considered to be finite and the dilute solution approximation is employed. As before, the fluctuation theory of solutions is used to express the derivatives of the activity coefficient of a solute in a ternary solution (dilute solute concentrations in a binary solvent) with respect to the concentrations of the solvent and cosolvent. The expressions obtained are combined with a theoretical equation for the activity coefficient of the solute. As a result, the activity coefficient of the solute was expressed through the activity coefficients of the solute at infinite dilution, solute mole fraction, some properties of the binary solvent (composition, molar volume and activity coefficients of the components) and parameters reflecting the nonidealities of binary species. The expression thus obtained was used to derive an equation for the solubility of poorly soluble drugs in aqueous binary solvents which was applied in two different ways. First, the nonideality parameters were considered as adjustable parameters, determined from experimental solubility data. Second, the obtained equation was used to correct the solubilities of drugs calculated via the infinite dilution approximation. It was shown that both procedures provide accurate correlations for the drug solubility.

Algorithms↗

Grafting of poly(ethylene oxide) to the surface of polyaniline films through a chlorosulfonation method and the biocompatibility of the modified films.

Poly(ethylene oxide) (PEO) could be grafted on the surface of polyaniline (PANI) films by chlorosulfonating the films with chlorosulfonic acid followed by reacting the modified films with PEO in a pyridine solution. The modified PANI films were examined by X-ray photoelectron spectroscopy and water droplet contact angles. The surface of the PEO grafted to hydrophobic PANI films became hydrophilic and the amounts of bovine serum albumin and human blood plasma platelet adsorbed onto it were decreased by more than 80%. For comparison purposes, and because the water wetting angle can be used as a measure of biocompatibility, wetting angle experiments have been also carried out for Pluronic triblock copolymer grafted to PANI and PEO or Pluronic molecules entrapped on the surfaces of PANI films. PANI was selected as substrate because one can easily change its surface properties by PEO grafting and because being conductive can be used as a sensor.

Adsorption↗

Solubility of drugs in aqueous solutions. Part 3: multicomponent mixed solvent.

The results obtained previously by Ruckenstein and Shulgin [Int. J. Pharm. 258 (2003a) 193; Int. J. Pharm. 260 (2003b) 283] via the fluctuation theory of solutions regarding the solubility of drugs in binary aqueous mixed solvents were extended in the present paper to multicomponent aqueous solvents. The multicomponent mixed solvent was considered to behave as an ideal solution and the solubility of the drug was assumed small enough to satisfy the infinite dilution approximation. An expression derived for the activity coefficient of a solid solute in a multicomponent solvent was used to obtain an equation for the solubility of a drug in terms of its solubilities in two subsystems of the multicomponent solvent and their molar volumes. Ultimately the solubility can be expressed in terms of those in binary or even in individual solvents and their molar volumes. The method was applied to the solubility of tioconazole and 19-Nor-1alpha,25-dihydrovitamin D(2) in several ternary and in a quaternary aqueous mixed solvents. The predicted solubilities were compared with experimental data and good agreement was found.

Algorithms↗

Improved surface properties of polyaniline films by blending with Pluronic polymers without the modification of the other characteristics.

Films of conductive polyaniline and amphiphilic Pluronic (P105) copolymer blends were prepared by dissolving the two polymers in N-methylpyrrolidinone (NMP) followed by a slow solvent evaporation at 55 degrees C. The characteristics of both doped and undoped films were determined by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), water droplet contact angles, differential scanning calorimetry (DSC), thermal gravimetry analysis (TG), wide-angle X-ray diffraction (WAXD), and tensile strength measurements. The surface of the blends became more hydrophilic than that of the hydrophobic PANI film, but the other properties of the blends did not change appreciably for Pluronic content lower than 50 wt%. Compared to PANI films, the more hydrophilic surfaces decreased the amount of bovine serum albumin protein adsorbed. By preventing biofouling, the polyaniline-Pluronic blends can become more useful as biosensors than the polyaniline films.

Adsorption↗

Two liquid adsorptive entrapment of a pluronic polymer into the surface of polyaniline films.

Pluronic triblock copolymers were entrapped on the surface of polyaniline (PANI) films by first immersing the latter in N-methylpyrrolidinone (NMP) solutions of one of the Pluronics for a short time. This softened the surface of the films and allowed the Pluronic molecules to entangle with PANI segments of the swollen film on the surface. Further, the films were taken out from the NMP solution and dipped into water, which is a nonsolvent for PANI. The rapid surface deswelling of PANI by the water resulted in the entrapment of the Pluronic on its surface, with the hydrophilic blocks toward water and the hydrophobic block imbedded in the PANI films. The modified PANI obtained was examined by X-ray photoelectron spectroscopy, water droplets contact angles, scanning electron microscopy, and wide angle X-ray diffraction. The surface of the Pluronic entrapped PANI films became more hydrophilic than the hydrophobic PANI films and decreased the amount of bovine serum albumin protein adsorbed on them. This means that, by reducing the biofouling, the life of the modified polyaniline film can be extended when the latter is employed as a biosensor.

Adsorption↗

Solubility of drugs in aqueous solutions. Part 2: binary nonideal mixed solvent.

As in a previous paper [Int. J. Pharm. 258 (2003) 193-201], the Kirkwood-Buff theory of solutions was employed to calculate the solubility of a solid in mixed solvents. Whereas in the former paper the binary solvent was assumed ideal, in the present one it was considered nonideal. A rigorous expression for the activity coefficient of a solute at infinite dilution in a mixed solvent [Int. J. Pharm. 258 (2003) 193-201] was used to obtain an equation for the solubility of a poorly soluble solid in a nonideal mixed solvent in terms of the solubilities of the solute in the individual solvents, the molar volumes of those solvents, and the activity coefficients of the components of the mixed solvent. The Flory-Huggins and Wilson equations for the activity coefficients of the components of the mixed solvent were employed to correlate 32 experimental data sets regarding the solubility of drugs in aqueous mixed solvents. The results were compared with the models available in literature. It was found that the suggested equation can be used for an accurate and reliable correlation of the solubilities of drugs in aqueous mixed binary solvents. It provided slightly better results than the best literature models but has also the advantage of a theoretical basis.

Algorithms↗

Solubility of drugs in aqueous solutions. Part 1. Ideal mixed solvent approximation.

The present paper deals with the application of the fluctuation theory of solutions to the solubility of poorly soluble drugs in aqueous mixed solvents. The fluctuation theory of ternary solutions is first used to derive an expression for the activity coefficient of a solute at infinite dilution in an ideal mixed solvent and, further, to obtain an equation for the solubility of a poorly soluble solid in an ideal mixed solvent. Finally, this equation is adapted to the solubility of poorly soluble drugs in aqueous mixed solvents by treating the molar volume of the mixed solvent as nonideal and including one adjustable parameter in its expression. The obtained expression was applied to 32 experimental data sets and the results were compared with the three parameter equations available in the literature.

Models, Chemical↗

Strong adhesion and smooth conductive surface via graft polymerization of aniline on a modified glass fiber surface.

The goal of this paper is to prepare surface-conductive glass fibers. The fibers were first hydroxylated, after which they were reacted with 3-bromopropyltrichlorosilane to form a bromopropylsilane monolayer, which was further reacted with aniline to substitute the bromine atoms. The surface-bound aniline molecules were used as active sites for the graft polymerization of polyaniline (PANI). The composition, structure and the morphology of the modified glass fiber surface were examined by X-ray photoelectron spectroscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The method generated a smooth and homogenous thin layer of PANI on the surface of the glass fiber with a surface conductivity of about 6 S/cm, hence larger than the usual value ( approximately 1 S/cm) of the bulk polyaniline.

Journal Article↗

Thermodynamic Approaches to Microemulsions.

The thermodynamics of microemulsions is treated by decomposing the Helmholtz free energy into a sum of a free energy F0 of a dispersion in a continuous medium containing fixed, noninteracting globules and a free energy DeltaF due to the entropy of dispersion of globules in the continuous medium and to the interactions among them. The pressure p1 in the continuous medium of the system involving fixed, noninteracting globules is determined in two different ways. In one of them, it is calculated by minimizing the total free energy with respect to the volume fraction phi of the dispersed medium, while in the other it is considered equal to the external pressure. The equivalence between the conventional thermodynamics of a multicomponent mixture and a thermodynamics based on modeling a microemulsion as a dispersion is used to derive the basic equations. Equations are obtained for single microemulsions as well as microemulsions coexisting with an excess dispersed phase and with both excess phases. One demonstrates that the conventional Laplace equation is not valid for a microemulsion, and new equations are derived. One concludes that the approach involving the determination of p1 via the optimization of the total free energy is the proper one. Considering that DeltaF is dominated by the entropy of dispersion of globules in the continuous medium, equations are established relating the interfacial free energy at the surface of the globules to the radius of the globules and phi, for the case in which a microemulsion coexists with an excess dispersed phase. These equations reveal that for phi approximately 0.5 the above state cannot be stable and that a transition to another state involving a microemulsion coexisting with both excess phases is likely to occur. Copyright 1998 Academic Press.

Journal Article↗

Ethylene Copolymerization with 1-Octene Using a 2-Methylbenz

A new effective constrained geometry catalyst precursor for the ethylene/1-octene copolymerization, namely 2-methylbenz[e]indenylamido complex [eta5:eta1-(2-MeBenzInd)SiMe2NtBu]TiCl2 (4), was synthesized. Activated with methylaluminoxane (MAO), the complex 4 showed (a) an improved copolymerization activity and stability, (b) an enhanced comonomer incorporation in the copolymer, and (c) most importantly, an increased copolymer molecular weight, when compared with the previously employed catalysts. The polymerization conditions were found to have a significant effect on the catalyst activity, 1-octene incorporation, molecular weight, and even copolymer microstructure. For the copolymerization parameters, the values rE approximately 2.20 for ethylene and rO approximately 0.55 for 1-octene with rE.rO approximately 1.21 were obtained, reflecting a pronounced tendency for the random distribution of the comonomers in the copolymer chain. The 13C NMR analysis revealed that the E-O copolymer generated by the MAO-activated complex 4 has a regioirregular arrangement of the 1-octene repeat units as a result of some tail-to-tail incorporation of the 1-octene comonomer.

Journal Article↗

Graft, Block-Graft and Star-Shaped Copolymers by an in Situ Coupling Reaction.

A tetrahydrofuran (THF) solution of the living poly(glycidyl methacrylate) (poly(GMA)) was prepared by the living anionic polymerization of GMA, using 1,1-diphenylhexyllithium (DPHL) as initiator, in the presence of LiCl ([LiCl]/[DPHL]0 = 3), at -45 degreesC. Upon introduction of a benzene solution of living polystyrene (poly(St)) into the above system at -30 degreesC, a very rapid coupling reaction between the epoxy groups of the living poly(GMA) and the propagating sites of the living poly(St) generated a graft copolymer containing a polar backbone and nonpolar side chains. When benzene solutions of living poly(St) and polyisoprene were sequentially transferred to the THF solution of living poly(GMA), a graft copolymer possessing two different nonpolar side chains was obtained. Further, a THF solution of the living block copolymer of methyl methacrylate (MMA) and GMA was prepared by the sequential anionic polymerization of the two monomers, at low temperatures. A block-graft copolymer having a poly(MMA-b-GMA) block backbone and poly(St) side chains was synthesized by reacting the living poly(St) with the epoxy groups of the above living block copolymer. In addition, when the poly(GMA) segment in poly(MMA-b-GMA) was short, a star-shaped copolymer containing a poly(MMA) arm and several poly(St) arms was obtained. GPC and 1H NMR measurements indicated that all the above copolymers possess high purity, designed molecular architectures, controlled molecular weights and narrow molecular weight distributions (Mw/Mn = 1.10-1.23).

Journal Article↗

On the Nature of The Liquid Expanded/Liquid Condensed Phase Transition in Monolayers of Polar Molecules.

During the liquid expanded/liquid condensed (LE/LC) phase transition, the long range repulsive interactions among fatty acid or phospholipid molecules induce the formation of a dispersion of LC islands (of almost the same size) as a superlattice in a continuous phase of LE molecules. Assuming that the transformation occurs at thermodynamic equilibrium, one demonstrates that, as the surface fraction of LC phase increases, the surface pressure pi increases. Consequently, the LE/LC transition can have characteristics different from those of the conventional first order transitions. Copyright 1997 Academic Press.

Journal Article↗