PubMed Health⌕ Search

Biomedical subjects

E Scherzinger

Publications and source records attributed to E Scherzinger.

At least 37 records · Page 2Linked to original sources

Purification of the large mobilization protein of plasmid RSF1010 and characterization of its site-specific DNA-cleaving/DNA-joining activity.

A site-specific and strand-specific nick, introduced into the RSF1010 plasmid origin of transfer (oriT), initiates unidirectional DNA transfer during bacterial conjugation. We have previously reproduced this nicking at the duplex oriT in vitro using purified preparations of the three known RSF1010-mobilization proteins: MobA (78-kDa form of RSF1010 primase), MobB and MobC [Scherzinger, E., Lurz, R., Otto, S. & Dobrinski, B. (1992) Nucleic Acids Res. 20, 41-48]. In this study we report the purification of MobA to apparent homogeneity and demonstrate that this 78-kDa protein by itself is capable of creating the oriT-specific nick if the DNA is present in the single-stranded form. By studying the cleavage of sets of oligodeoxyribonucleotides varying successively by single nucleotides at the 5' or 3' end, the minimal substrate for cleavage has been defined. The results identify the MobA recognition sequence within the 11-residue oligonucleotide AAGTGCGC-CCT which is cleaved at the 3' side of the G at position 7. During the cleavage reaction, MobA becomes covalently linked to the 5'-phosphate end of each broken DNA molecule and retains its activity for the rejoining reaction. It can transfer the attached DNA to an incoming acceptor strand provided that the DNA molecule contains at its 3' end at least the seven nucleotides upstream of the nick site. The covalent MobA-DNA linkage has been determined by two-dimensional thin-layer electrophoresis to be a tyrosyl phosphate. Extensive digestion of the 32P-labeled MobA-oligonucleotide complex with lysine carboxypeptidase yielded a single DNA-bound peptide which was purified and sequenced. The resulting peptide sequence consists of amino acid residues at positions 22-30 in the MobA sequence and identifies Tyr24 as the residue linked to DNA in the covalent complex.

Amino Acid Sequence↗

Phage P4 alpha protein is multifunctional with origin recognition, helicase and primase activities.

alpha Protein of satellite phage P4 of Escherichia coli is multifunctional in P4 replication with three activities. First, the protein (subunit M(r) = 84,900) complexes specifically the P4 origin and the cis replication region required for replication. alpha Protein interacts with all six type I repeats (TGTTCACC) present in the origin. Second, associated with the alpha protein is a DNA helicase activity that is fueled by hydrolysis of a nucleoside 5' triphosphate. All common NTPs except UTP and dTTP can serve as cofactors. Strand separation of partial duplexes containing tailed ends that resemble a replication fork is preferred, although a preformed fork is not absolutely required for the enzyme to invade and unwind duplex DNA. alpha Protein catalyzes unwinding in the 3'-5' direction with respect to the strand it has bound. Finally, the primase activity already demonstrated for alpha protein is due to synthesis of RNA primers. In vitro, alpha protein generates di- to pentaribonucleotides on single-stranded phage fd DNA. The predominant product is the dimer pppApG, on which most of the longer oligoribonucleotides are based. Using DNA oligonucleotides of defined sequence as templates, synthesis of pppApG was also detectable. To date, among prokaryotic and eukaryotic replication systems, gp alpha is the only protein known that combines three activities on one single polypeptide chain.

Adenosine Triphosphate↗

In vitro cleavage of double- and single-stranded DNA by plasmid RSF1010-encoded mobilization proteins.

We have used purified RSF1010 mobilization proteins to reproduce in vitro a strand-specific nicking at the plasmid origin of transfer, oriT. In the presence of Mg2+, the proteins MobA (78-kDa form of RSF1010 DNA primase), MobB, and MobC and supercoiled or linear duplex oriT DNA form large amounts of a cleavage complex, which is characterized by its sensitivity to protein-denaturant treatment. Upon addition of SDS to such a complex, a single strand break is generated in the DNA, and MobA is found linked to the 5' nick terminus, presumably covalently. The double-strand nicking activity of MobA requires, in addition to Mg2+, the presence of MobC and is stimulated by the presence of MobB. The nick site has been shown by DNA sequencing to lie at the position cleaved in vivo during transfer, between nucleotides 3138/3139 in the r strand of RSF1010. We have found that MobA will also cleave DNA at sites other than oriT if the DNA is present in single-stranded form. Breakage in this case occurs in the absence of denaturing conditions, and after prolonged incubation, reclosure can be demonstrated.

Bacterial Proteins↗

Plasmid RSF1010 DNA replication in vitro promoted by purified RSF1010 RepA, RepB and RepC proteins.

We have constructed and analyzed an in vitro system that will efficiently replicate plasmid RSF1010 and its derivatives. The system contains a partially purified extract from E.coli cells and three purified RSF1010-encoded proteins, the products of genes repA, repB (or mobA/repB), and repC. Replication in this system mimics the in vivo mechanism in that it (i) is initiated at oriV, the origin of vegetative DNA replication, (ii) proceeds in a population of plasmid molecules in both directions from this 396-base-pair origin region, and (iii) is absolutely dependent on the presence of each of the three rep gene products. In addition, we find that E.coli DNA gyrase, DnaZ protein (gamma subunit of poIIII holoenzyme) and SSB are required for in vitro plasmid synthesis. The bacterial RNA polymerase, the initiation protein DnaA, and the primosomal proteins DnaB, DnaC, DnaG and DnaT are not required. Furthermore, the replicative intermediates seen in the electron microscope suggest that replication in vitro begins with the simultaneous or non-simultaneous formation of two displacement loops that expand for a short stretch of DNA toward each other, and form a theta-type structure when the two displacing strands pass each other.

Bacterial Proteins↗

Gene F of plasmid RSF1010 codes for a low-molecular-weight repressor protein that autoregulates expression of the repAC operon.

The repAC operon of plasmid RSF1010 consists of the genes for proteins E, F, RepA (DNA helicase), and RepC (origin-binding initiator protein) and is transcriptionally initiated by a promoter called P4. We have studied the expression of the repAC operon in vivo by using fusions to the lacZ reporter gene. The results show that the product of the second gene, F, autoregulates the operon by inhibiting transcription from P4. To verify its properties postulated from the in vivo studies and to initiate its biochemical characterization, we have purified the F protein from an overproducing E.coli strain constructed in vitro. Purification was based on a gel retardation assay for detection of P4-specific DNA binding. Subsequent DNase footprinting of the F binding sites showed clear protection around two partially symmetric P4 sequences of 16 bp, each of which matches the symmetric consensus sequence, GCGTGAGTACTCACGC, in at least 13 positions. The native repressor, as judged from gel filtration, velocity sedimentation and crosslinking studies, exists as a dimer in dilute solution; its monomeric subunit, as predicted from DNA sequence and N-terminal protein sequence data, consists of 68 amino acids and has a calculated M tau = 7,673.

Base Sequence↗

Complete nucleotide sequence and gene organization of the broad-host-range plasmid RSF1010.

We present the complete nucleotide sequence of RSF1010, a naturally occurring broad-host-range plasmid belonging to the Escherichia coli incompatibility group Q and encoding resistance to streptomycin and sulfonamides. A molecule of RSF1010 DNA consists of 8684 bp and has a G + C content of 61%. Analysis of the distribution of translation start and stop codons in the sequence has revealed the existence of more than 40 open reading frames potentially capable of encoding polypeptides of 60 or more amino acids. To date, products of eleven such potential RSF1010 genes have been identified through the application of controlled expression vector systems, and for eight of them, the reading frame has been confirmed by N- and/or C-terminal amino acid sequence determinations on the purified proteins. The sequencing results are discussed in relation to the systems of replication, host range, conjugal mobilization and antibiotic resistance determinants associated with the RSF1010 plasmid.

Amino Acid Sequence↗

Protein RepC is involved in copy number control of the broad host range plasmid RSF1010.

Essential replication (rep) genes of the broad host range plasmid RSF1010 have been cloned onto controlled expression vectors and their protein products have been visualized, after induction, by NaDodSO4/polyacrylamide gel electrophoresis of whole cell lysates. During this induction the replication of a coresident RSF1010 replicon, pKT210, was analyzed by quantitative DNA X DNA hybridization. The initiation of pKT210 replication was stimulated 6-fold by a simultaneous overproduction of the RepA and RepC proteins compared to cells in which only the RepA protein was overproduced. An enhanced synthesis of the RepB protein resulted in a 1.6-fold stimulation of pKT210 replication, whereas an overproduction of the RepA protein alone had no effect. Purified RepC protein has been shown to bind preferentially to DNA carrying the replication origin of RSF1010. Within this segment it was bound specifically to those DNA fragments that contained the 20-base-pair direct repeats of the origin region. These results suggest that RepC protein acts as a positive replication regulator, that its concentration is rate-limiting, and that the replication rate of RSF1010 is controlled, at least in part, at the level of RepC synthesis.

Bacterial Proteins↗

Replication of the broad host range plasmid RSF1010: requirement for three plasmid-encoded proteins.

Cloning of specific regions of plasmid RSF1010, in conjunction with in vitro replication studies, has revealed three novel genes: repA, repB, and repC. They are clustered in one region of the plasmid, separated from the origin of replication by regions that are not essential for plasmid viability in an Escherichia coli host. In vivo, a 2.1-kilobase segment of the plasmid, bearing the replication origin, can establish itself as an autonomous replicon if the DNA region carrying the three rep genes is present in the same cell on an independent plasmid. In vitro, RSF1010 DNA is efficiently replicated by an ammonium sulfate fraction from the E. coli extract, provided the extracts are prepared from cells that can supply the required rep gene products. Using cells containing the cloned rep gene region as a source of elevated levels of the rep proteins, we have partially purified these proteins in functional form. When added to an enzyme fraction derived from plasmid-free cells, they specifically promote the replication of plasmid DNA bearing the RSF1010 origin.

Bacterial Proteins↗

Recombinant plasmids carrying promoters, genes and the origin of DNA replication of the early region of bacteriophage T7.

Two full-length contiguous HpaI fragments of the 0 to 18.2% region of T7 H DNA (HpF-H and HpG) were inserted into plasmids pHV14 or pC194 using oligo(dG . dC) connectors or synthetic HindIII adaptors. Amplification of the two early T7 fragments was achieved by transforming lysostaphin-treated S. aureus W57 with the hybrid plasmids. Experimental evidence is presented suggesting that neither of these T7 segments can be cloned in an intact form in E. coli. One of the hybrids, pHV14-HpF-H, proved to be unstable even in B. subtilis 168. The supercoiled recombinant plasmids were tested for their capacity to support RNA synthesis by purified E. coli or T7 RNA polymerases and to serve as templates in a cell-free T7 DNA replication system. The results of these in vitro studies indicate the presence of active "early" promoters in the cloned fragment HpF-H and active "late" promoters, as well as a functional origin of replication in the cloned fragment HpG.

Cloning, Molecular↗

Replication of the colicin E1 plasmid in extracts of Escherichia coli: uncoupling of leading strand from lagging strand synthesis.

The replication of the ColEl plasmid was studied in extracts from E. coli dnaG mutants. It was found that the synthesis of the complementary strands of ColEl DNA can be carried out in these extracts in two consecutive steps: (1) synthesis of the leading L strand independent of the dnaG function, and (2) synthesis of the lagging H strand depending upon addition of wild-type dnaG protein. In contrast to L strand synthesis, the latter reaction is insensitive to rifampicin and novobiocin. Both synthetic pathways are however blocked by antiserum directed against dnaB protein. This indicates an additional role of the dnaB protein in duplex DNA replication besides assisting the dnaG protein in the priming of lagging strand synthesis. The T7 gene-4 protein acting in conjunction with T7 DNA polymerase can substitute for both the function of the dnaB and dnaG protein. It is concluded that plasmid replication proceeds by a semi-discontinuous mechanism.

Bacteriocin Plasmids↗

A DNA primase specified by I-like plasmids.

An enzyme has been isolated from Escherichia coli strains harboring the I-like plasmid R64drd11, which is capable of initiating DNA synthesis on the circular, single-stranded DNA of phages phi X174, fd, and G4. In the conversion of these templates to duplex forms in vitro, the enzyme can substitute for the functions of E. coli dna B-dnaB-dnaC-dnaG proteins, E. coli RNA polymerase, and E. coli dnaG protein, respectively. The enzyme requires all four ribonucleoside triphosphates for optimal activity, although a combination of ATP, CTP, and GTP can almost completely satisfy the rNTP requirement. The enzyme appears to cooperate specifically with DNA polymerases III because single-stranded DNA-dependent synthesis takes place in extracts deficient in DNA polymerases I and II but not in extracts from a dnaZ mutant. Highly purified enzyme preparations consist mostly of two major polypeptides, Mr 140,000 and 180,000, when analyzed by sodium dodecyl sulfate gel electrophoresis. These polypeptides cosediment with the enzyme activity through a glycerol gradient with a sedimentation coefficient of 3.6 S. DNA priming activity in extracts of E. coli strains harboring the mutant plasmids R64drd11 or ColIdrd1, which are derepressed in functions of conjugational DNA transfer, severalfold higher than the activity from strains carrying the corresponding wild-type plasmid. This correlation suggests that the enzyme may play a role in conjugational DNA synthesis.

Conjugation, Genetic↗

Role of bacteriophage T7 DNA primase in the initiation of DNA strand synthesis.

Bacteriophage T7 DNA primase (gene-4 protein, 66,000 daltons) enables T7 DNA polymerase to initiate the synthesis of DNA chains on single-stranded templates. An initial step in the process of chain initiation is the formation of an oligoribonucleotide primer by T7 primase. The enzyme, in the presence of natural SS DNA, Mg++ (or Mn++), ATP and CTP (or a mixture of all 4 rNTPs), catalyzes the synthesis of di-, tri-, and tetraribonucleotides all starting at the 5' terminus with pppA. In a subsequent step requiring both T7 DNA polymerase and primase, the short oligoribonucleotides (predominantly pppA-C-C-AOH) are extended by covalent addition of deoxyribonucleotides. With the aid of primase, T7 DNA polymerase can also utilize efficiently a variety of synthetic tri-, tetra-, or pentanucleotides as chain initiators. T7 primase apparently plays an active role in primer extension by stabilizing the short primer segments in a duplex state on the template DNA.

Coliphages↗

Bacteriophage-T7-induced DNA-priming protein. A novel enzyme involved in DNA replication.

The T7gene-4 protein has been purified to near homogeneity using a complementation assay in vitro, and it is designated T7 DNA-priming protein (DNA primase). The purified enzyme enables T7 DNA polymerase to initate DNA synthesis on various circular single-stranded DNA templates by a mechanism which involes the synthesis of a very short RNA primer. The oligoribonucleotide, which is linked to the product DNA via a 3':5'-phosphodiester bond, starts with pppA-C and terminates predominantly with AMP. When only ATP and CPT are precursors, the RNA primer is found to be primarily a tetranucleotide of the sequence pppA-C-C-A. Using oligoribonucleotides in place of ribonucleoside triphosphates as chain initators, T7 DNA-priming protein drastically increases the efficiency with which T7 DNA polymerase can utilize particular tetranucleotide primers containing A and C residues. T7 DNA-priming protein also enables T7 DNA polymerase to make use of native or nicked duplex T7 DNA as template-primer. This reaction does not require ribonucleoside triphosphates, although their addition enhances DNA synthesis 2--4 fold. The product formed in their absence is covalently attached to the template DNA and is found to contain a few long branches when examined by electron microscopy. In the presence of ribonucleoside triphosphates most of the newly made product arises from imitation of DNA chains de novo. Incubation of three proteins: T7 DNA-priming protein, T7 DNA polymerase, and T7 DNA-binding protein, with ribonucleoside and deoxyribonucleoside triphosphates, and with phiX174DNA as template leads to the generation of 'rolling circle-like' structures as visualized in the electron microscope. Single-stranded regions at the tail-circle junction indicate that initations can occur de novo on the displaced complementary strand. This is consistent with a discontinuous mode of 'lagging' strand synthesis and suggests that the same proteins may also be responsible for fork propagation in vivo.

Bacterial Proteins↗

Studies on bacteriophage T7 DNA synthesis in vitro. I. Resolution of the T7 replication system into its components.

A soluble extract prepared from T7-infected E. coli is able to initiate DNA synthesis on an exogenous T7 DNA template. We have developed a fractionation procedure to resolve and identify the proteins required for T7 DNA synthesis. By this method we have purified the following T7 replication-related proteins (each greater than 50% pure as judged by sodium dodecyl sulfate gel electrophoresis): T7 DNA-binding protein (27,000 daltons), T7 RNA polymerase (105,000 daltons), T7 DNA polymerase (gene 5-protein, 85,000 daltons, plus host-factor), T7 DNA ligase (40,000 daltons), and T7 DNA-priming protein (65,000 daltons). The T7 DNA-priming protein, synthesized between 7.5 and 15 min following infection, was not detectable if the infecting phage carried an amber mutation in gene 4. Using an in vitro complementation assay which specifically measures the stimulation of DNA synthesis in an extract prepared from T7 gene 4-mutant infected cells, we have purified the DNA-priming protein about 2,000-fold. The purified priming protein preparations are essentially free of endonuclease, exonuclease, DNA ligase and DNA polymerase activity, but they do contain measurable DNA-dependent RNA synthetic acitvity. The enzyme is rapidly inactivated by heating to 46 degrees C and by treatment with N-ethylmalemide. In the presence of T7 DNA-binding protein and all four ribonucleoside triphosphates, the DNA-priming protein enables T7 DNA polymerase to initiate DNA synthesis on intact duplex T7 DNA. Closer studies of its enzymatic function as well as of the possible roles of the other proteins in the T7 replication system will be presented in the accompanying paper.

Chromosome Mapping↗

Studies on bacteriophage T7 DNA synthesis in vitro. II. Reconstitution of the T7 replication system using purified proteins.

DNA synthesis in vitro using intact duplex T7 DNA as template is dependent on a novel group of three phage T7-induced proteins: DNA-priming protein (activity which complements a cell extract lacking the T7 gene 4-protein), T7 DNA polymerase (gene 5-protein plus host factor), and T7 DNA-binding protein. The reaction requires, in addition to the four deoxyribonucleoside triphosphates, all four ribonucleoside triphosphates and is inhibited by low concentrations of actinomycin D. Evidence is presented that the priming protein serves as a novel RNA polymerase to form a priming segment which is subsequently extended by T7 DNA polymerase. T7 RNA polymerase (gene 1-protein) can only partially substitute for the DNA-priming protein. At 30 degrees C, deoxyribonucleotide incorporation proceeds for more than 2 hours and the amount of newly synthesized DNA can exceed the amount of template DNA by 10-fold. The products of synthesis are not covalently attached to the template and sediment as short (12S) DNA chains in alkaline sucrose gradients. Sealing of these fragments into DNA of higher molecular weight requires the presence of E.coli DNA polymerase I and T7 ligase. Examination of the products in the electron microscope reveals many large, forked molecules and a few "eye"-shaped structures resembling the early replicative intermediates normally observed in vivo.

Coliphages↗