PubMed Health⌕ Search

Biomedical subjects

E Subramanian

Publications and source records attributed to E Subramanian.

At least 19 recordsLinked to original sources

Heterologous expression of proteins from Plasmodium falciparum: results from 1000 genes.

As part of a structural genomics initiative, 1000 open reading frames from Plasmodium falciparum, the causative agent of the most deadly form of malaria, were tested in an E. coli protein expression system. Three hundred and thirty-seven of these targets were observed to express, although typically the protein was insoluble. Sixty-three of the targets provided soluble protein in yields ranging from 0.9 to 406.6 mg from one liter of rich media. Higher molecular weight, greater protein disorder (segmental analysis, SEG), more basic isoelectric point (pI), and a lack of homology to E. coli proteins were all highly and independently correlated with difficulties in expression. Surprisingly, codon usage and the percentage of adenosines and thymidines (%AT) did not appear to play a significant role. Of those proteins which expressed, high pI and a hypothetical annotation were both strongly and independently correlated with insolubility. The overwhelmingly important role of pI in both expression and solubility appears to be a surprising and fundamental issue in the heterologous expression of P. falciparum proteins in E. coli. Twelve targets which did not express in E. coli from the native gene sequence were codon-optimized through whole gene synthesis, resulting in the (insoluble) expression of three of these proteins. Seventeen targets which were expressed insolubly in E. coli were moved into a baculovirus/Sf-21 system, resulting in the soluble expression of one protein at a high level and six others at a low level. A variety of factors conspire to make the heterologous expression of P. falciparum proteins challenging, and these observations lay the groundwork for a rational approach to prioritizing and, ultimately, eliminating these impediments.

Animals↗

Studies on defluoridation of water by tamarind seed, an unconventional biosorbent.

Tamarind seed, a household waste from the kitchen is used for the sorptive removal of fluoride from synthetic aqueous solution as well as from field water samples. Batch sorptive defluoridation was conducted under variable experimental conditions such as pH, agitation time, initial fluoride concentration, particle size and sorbent dose. Maximum defluoridation was achieved at pH 7.0. Defluoridation capacity decreases with increase in temperature and particle size. Further, defluoridation follows first order kinetics and Langmuir adsorption isotherm. Desorption was carried out with 0.1 N HCl and is 90 per cent. The surface and sorption characteristics were analysed using FTIR and SEM techniques. All these results indicate the involvement of energetic forces such as coulombic interaction in sorption. For domestic and industrial applications, defluoridation with 100% achievement and subsequent regeneration of adsorbent was performed with a household water filter and fixed bed column respectively.

Adsorption↗

G.N. Ramachandran.

Explore the source record for details and available documents.

Crystallography, X-Ray↗

Coexistence of folded and extended conformations of a tripeptide containing alpha, alpha -di-n-propylglycine in crystals.

The crystal structure of the tripeptide Boc-Leu-Dpg-Val-OMe (Dpg, alpha, alpha -di-n-propylglycine) reveals the coexistence of two distinct backbone conformations. In molecule A the Dpg residue adopts a fully extended conformation (phi = 76.0 degrees, psi = 180.0 degrees) while in molecule B a left handed helical conformation (phi = 62.8 degrees, psi = 39.6 degrees) is observed. Molecule B adopts a folded structure corresponding to a highly distorted Type II beta-turn conformation, which lacks an intramolecular 4 -> 1 hydrogen bond. In contrast, molecule A has an open, extended conformation. The results demonstrate that both fully extended and helical conformations are energetically accessible to the Dpg residue.

Models, Molecular↗

Observation of a sterically unfavorable side-chain conformation in a leucyl residue: crystal and molecular structure of L-leucyl-L-leucine.DMSO solvate.

The crystal structure of a dipeptide L-leucyl-L-leucine (C12H24N2O3) has been determined. The crystals are monoclinic, space group P2(1), with a = 5.434(4) A, b = 15.712(7) A, c = 11.275(2) A, beta = 100.41(1) degrees, and Z = 2. The crystals contain one molecule of dimethyl sulfoxide (DMSO) as solvent of crystallization for each dipeptide molecule. The structure has been solved by direct methods and refined to a final R index of 0.059 for 920 reflections (sin theta/lambda < or = 0.60 A-1) with I > or = 2 sigma (I). The trans peptide unit shows substantial degree of non-planarity (delta omega = 14 degrees). The peptide backbone adopts an extended conformation with torsion angles of psi 1 = 138(1) degrees, omega 1 = 166(1) degrees, phi 2 = -149.3(7) degrees, psi 21 = 164.2(7) degrees, and psi 22 = -15(1) degrees. For the first leucyl residue, the side-chain conformation is specified by the torsion angles 1 chi 1 = 176.7(7) degrees, 1 chi 21 = 62(1) degrees, 1 chi 22 = -177.4(8) degrees; the second leucyl residue adopts a sterically unfavorable conformation with 2 chi 1 = 61(1) degrees, 2 chi 21 = 97(1) degrees, and 2 chi 22 = -151(1) degrees. The packing involves head-to-tail interaction of peptide molecules and segregation of polar and nonpolar regions. The DMSO molecule is strongly hydrogen bonded to the terminal NH3+ group.

Crystallization↗

Structure and conformation of linear peptides. XIV. Structure of tert-butyloxycarbonyl-L-alanylglycine monohydrate.

The crystal structure of a dipeptide tert-butyloxycarbonyl-L-alanylglycine monohydrate (C10H18N2O5.H2O), molecular weight 264, has been determined. The crystals are monoclinic, space group P2(1), with a = 10.767(1), b = 6.317(1), c = 10.981(2)A, beta = 109.15(2) degrees, and Z = 2, Dc = 1.24 g cm-3. The structure was solved by direct methods and refined to a final R-index of 0.045 for 856 reflections (sin theta/lambda < 0.55 A-1) with I > 2 sigma. The N-terminus of the molecule blocked with the t-Boc group is uncharged and the C-terminus exists in an unionized state. The peptide unit is trans and shows slight deviations from planarity. (delta omega = 3.1 degrees). The peptide backbone is folded, with torsion angles of phi 1 = -76.0(5), psi 1 = 164.3(4), omega 1 = 176.9(5), phi 2 = 116.1(5), psi 21 = -2.8(7) and psi 22 = 177.8(4) degrees. The conformation about the urethane bond (C5-N1) is trans. The urethane group is essential planar. The conformation of the boc group is trans-trans.

Dipeptides↗

Crystal structure of tert.-butyloxycarbonyl-L-prolyl-D-alanyl-D-alanyl-N-methylamide. Dimeric beta-sheet formation.

The crystal structure of the tripeptide t-Boc-L-Pro-D-Ala-D-Ala-NHCH3, monohydrate, (C17H30N4O5.H2O, molecular weight = 404.44) has been determined by single crystal X-ray diffraction. The crystals are monoclinic, space group P2(1), a = 9.2585(4), b = 9.3541(5), c = 12.4529(4)A, beta = 96.449(3) degrees, Z = 2. The peptide units are in the trans and the tBoc-Pro bond in the cis orientation. The first and third peptide units show significant deviations from planarity (delta omega = 5.2 degrees and delta omega = 3.7 degrees, respectively). The backbone torsion angles are: phi 1 = -60 degrees, psi 1 = 143.3 degrees, omega 1 = -174.8 degrees, phi 2 = 148.4 degrees, psi 2 = -143.1 degrees, omega 2 = -179.7 degrees, phi 3 = 151.4 degrees, psi 3 = -151.9 degrees, omega 3 = -176.3 degrees. The pyrrolidine ring of the proline residue adopts the C2-C gamma conformation. The molecular packing gives rise to an antiparallel beta-sheet structure formed of dimeric repeating units of the peptide. The surface of the dimeric beta-sheet is hydrophobic. Water molecules are found systematically at the edges of the sheets interacting with the urethane oxygen and terminal amino groups. Surface catalysis of an L-Ala to D-Ala epimerization process by water molecules adsorbed on to an incipient beta-sheet is suggested as a mechanism whereby crystals of the title peptide were obtained from a solution of tBoc-Pro-D-Ala-Ala-NHCH3.

Amino Acid Sequence↗

Structure and conformation of linear peptides. XIII. Structure of L-phenylalanyl-glycyl-glycine.

The crystal structure of a tripeptide, L-phenylalanyl-glycyl-glycine (C13H17N3O4), molecular weight = 279.3, has been determined. The crystals are orthorhombic, space group P2(1)2(1)2(1), with a = 5.462(1) A, b = 15.285(5), c = 16.056(4), Z = 4, and P (calc) = 1.384 g.cm-3. The final R-index is 0.052 for 866 reflections with sin theta/lambda less than or equal to 0.55 A-1 and I greater than 1 sigma. The molecule exists as a zwitterion, with the N-terminus protonated and the C-terminus in an ionized form. Both the peptide units are in the trans configuration and planar, though one of them shows significant deviations from planarity ([delta w[ = 5.1 degrees). The peptide backbone is folded, with the torsion angles of: psi 1 = 116.2(5) degrees, omega 1 = 178.8(4), phi 2 = -89.7(5). psi 2 = -28.9(6), omega 2 = -174.9(4), phi 3 = 134.9(5), psi 31 = 7.8(6), psi 32 = -172.6(4). The terminal glycine adopts a "D-residue" conformation. For the sidechain of phenylalanine, chi 1 = 175.5(4), chi 2 = -127.0(6).

Crystallography↗

Crystal structure and conformation of glycyl-glycyl-sarcosine.

Crystals of the tripeptide, glycyl-glycyl-sarcosine (C7H13N3O4) from aqueous methanol are orthorhombic, space group Pbcn with cell parameters at 294 K of a = 8.279(1), b = 9.229(4), c = 24.447(5)A, V = 1868.0 A3, M.W. = 203.2, and Z = 8. The crystal structure was solved and refined using CAD-4 data (1171 reflections greater than or equal to 3 sigma) to a final R-value of 0.053. The first peptide linkage is trans and planar whereas the second peptide link between Gly and sarcosine is cis and appreciably non-planar (w = 7.4 degrees). The peptide backbone has an extended conformation at the N-terminal part but adopts a polyglycine-II type of conformation at the C-terminal part. The backbone torsion angles are: psi 1 = -173.9, w1 = -177.8, (phi 2, psi 2) = (-178.8, -170.8), w2 = 7.4, (phi 3, psi 3) = (-81.6, 165.6 degrees).

Crystallography↗

Structure and conformation of linear peptides. XII. Structure of tryptophanyl-glycyl-glycine dihydrate.

The crystal structure of a tripeptide, tryptophanyl-glycyl-glycine dihydrate (C15H18N4O4.2H2O, molecular weight = 354) has been determined. The crystals are orthorhombic, space group P2(1)2(1)2(1), with a = 7.875 (1) A, b = 9.009(1), c = 24.307(1) and Z = 4. The final R-index is 0.058 for 1488 reflections [sin theta)/lambda less than or equal to 0.6 A-1) with I greater than 2 sigma (I). The molecule exists as a zwitterion, with terminal NH3+ and COO- groups. The peptide units are trans and nearly perpendicular to the plane of the carboxyl group. The backbone torsion angles are: psi 1 = 132.7 degrees, omega 1 = 174.2 degrees, phi 2 = 88.2 degrees, psi 2 = 8.6 degrees, omega 2 = -179.8 degrees, phi 3 = -85.2 degrees, psi 31 = -178.1 degrees, psi 32 = 5.0 degrees. For the sidechain of tryptophan, chi 1 = -171.6 degrees, chi 2 = 101.0 degrees.

Amino Acid Sequence↗

Structure and refinement at 1.8 A resolution of the aspartic proteinase from Rhizopus chinensis.

The structure of rhizopuspepsin (EC 3.4.23.6), the aspartic proteinase from Rhizopus chinensis, has been refined to a crystallographic R-factor of 0.143 at 1.8 A resolution. The positions of 2417 protein atoms have been determined with a root-mean-square (r.m.s.) error of 0.12 A. In the final model, the r.m.s. deviation from ideality for bond distances is 0.010 A, and for angle distances it is 0.034 A. During the course of the refinement, a calcium ion and 373 water molecules, of which 17 are internal, have been located. The active aspartate residues, Asp35 and Asp218, are involved in similar hydrogen-bonding interactions with neighboring residues and with several water molecules. One water molecule is located between the two carboxyl groups of the catalytic aspartate residues in a tightly hydrogen-bonded position. The refinement resulted in an unambiguous interpretation of the highly mobile "flap", a beta-hairpin loop region that projects over the binding pocket. Large solvent channels are formed when the molecules pack in the crystal, exposing the binding pocket and making it easily accessible. Intermolecular contacts involve mainly solvent molecules and a few protein atoms. The three-dimensional structure of rhizopuspepsin closely resembles other aspartic proteinase structures. A detailed comparison with the structure of penicillopepsin showed striking similarities as well as subtle differences in the active site geometry and molecular packing.

Amino Acid Sequence↗

The crystal structure of pea lectin at 3.0-A resolution.

The structure of pea lectin has been determined to 3.0-A resolution based on multiple isomorphous replacement phasing to 6.0-A resolution and a combination of single isomorphous replacement, anomalous scattering, and density modification to 3.0-A resolution. The pea lectin model has been optimized by restrained least squares refinement against the data between 7.0- and 3.0-A resolution. The final model at 3.0 A gives an R factor of 0.24 and a root mean square deviation from ideal bond distances of 0.02 A. The two monomers in the asymmetric unit are related by noncrystallographic 2-fold symmetry to form a dimer. Monomers were treated independently in modeling and refinement, but are found to be virtually identical at this resolution. The molecular structure of the pea lectin monomer is very similar to that of concanavalin A, the lectin from the jack bean. Similarities extend from secondary and tertiary structures to the occurrence of a cis-peptide bond and the pattern of coordination of the Ca2+ and Mn2+ ions. Differences between the two lectin structures are confined primarily to the loop regions and to the chain termini, which are different and give rise to the unusual permuted relationship between the pea lectin and concanavalin A protein sequences.

Concanavalin A↗

Structure and conformation of linear peptides. VIII. Structure of t-Boc-glycyl-L-phenylalanine.

The crystal structure of t-Boc-glycyl-L-phenylalanine (C14H22N2O5, molecular weight = 298) has been determined. Crystals are monoclinic, space group P2(1), with a = 7.599(1) A, b = 9.576(2), c = 12.841(2), beta = 97.21(1) degrees, Z = 2, Dm = 1.149, Dc = 1.168 g X cm-3. Trial structure was obtained by direct methods and refined to a final R-index of 0.064 for 1465 reflections with I greater than 1 sigma. The peptide unit is trans planar and is nearly perpendicular to the plane containing the urethane moiety. The plane of the carboxyl group makes a dihedral angle of 16.0 degrees with the peptide unit. The backbone torsion angles are omega 0 = -176.9 degrees, phi 1 = -88.0 degrees, psi 1 = -14.5 degrees, omega 1 = 176.4 degrees, phi 2 = -164.7 degrees and psi 2 = 170.3 degrees. The phenylalanine side chain conformation is represented by the torsion angles chi 1 = 52.0 degrees, chi 2 = 85.8 degrees.

Dipeptides↗

Structure and conformation on linear peptides. VI. Structure of D,L-alanyl-L,D-norvaline.

The dipeptide, (DL)-alanyl-(DL)-norvaline, crystallizes in the monoclinic space group P2(1)/c, with a = 12.559(2)A, b = 5.265(1), c = 16.003(3), beta = 103.53(2) degrees, Z = 4. The structure was solved by direct methods and refined to an R-value of 0.054 for 871 reflections with I greater than 2 sigma. The molecule exists as a zwitterion in the crystal. The peptide unit is trans and shows significant deviations from planarity (delta omega = 12.4 degrees). The peptide backbone adopts an extended conformation. The unit cell contains D-Ala-L-norval and its enantiomer. The molecular conformation and packing features show a striking resemblance to those for D-Ala-L-Met (1), and leads to the speculation that norvaline might act as an analog of methionine.

Dipeptides↗

Structure and conformation of linear peptides. V. Structure of L-prolyl-glycyl-glycine.

The tripeptide, L-prolyl-glycyl-glycine, crystallizes in the trigonal space group P3(2), with a = b = 8.682(2) A, c = 12.008(2) and Z = 3. The structure was solved by direct methods and refined to an R-value of 0.07 for 727 reflections (I greater than 1.0 sigma). The molecule exists as a zwitterion in the crystal. The peptide units are trans and show significant deviations from planarity (omega 1 = 169.7 degrees, omega 2 = -170.1 degrees). The peptide backbone adopts a left-handed helical conformation similar to that of polyglycine II and polyproline II.

Amino Acid Sequence↗

Crystallization and preliminary X-ray investigation of acid protease from Cladosporium.

Crystals of Cladosporium acid protease have been grown from solutions of polyethylene glycol. The crystals are orthorhombic, space group, P212121, with alpha = 136.5(7) A, b = 109.4(5) A, and c = 87.7(4) A. There are four acid protease molecules/asymmetric unit. The crystals are quite stable to x-rays and diffract beyond 3.0-A resolution.

Aspartic Acid Endopeptidases↗

Structure and conformation of linear peptides. I. Structure of L-tyrosyl-L-tyrosine.

L-tyrosyl-L-tyrosine crystallizes as a dihydrate in the orthorhombic system, space group C222(1), with a = 12.105(2), b = 12.789(2), c = 24.492(3) A, Z = 8. The structure was solved by direct methods and refined to a final R-value of 0.059 for 1740 observed reflections. The molecule exists as a zwitterion, the peptide unit is trans planar, and the backbone torsion angles correspond to an extended conformation, with psi 1 = 149.4 degrees, phi 2 = -161.2 degrees, psi 2 = 158.3 degrees. The values of the side-chain torsion angles (chi 1, chi 2) are (-58.8 degrees, -63.1 degrees) for the first tyrosine and (-171.7 degrees, -116.5 degrees) for the second. The planes of the aromatic rings are nearly parallel (dihedral angle of 6.1 degrees), and their centers are separated by 10.9 A. The carboxyl plane forms a dihedral angle of 23.8 degrees with the plane of the peptide bond.

Crystallization↗