PubMed Health⌕ Search

Biomedical subjects

E Sulkowski

Publications and source records attributed to E Sulkowski.

At least 37 records · Page 2Linked to original sources

Large scale purification of human fibroblast interferon.

Human fibroblast interferon was partially purified, about 4,000-fold, on a chromatographic tandem of columns: concanavalin A-agarose leads to phenyl-agarose, to a specific activity of ca 4 x 10(7). The overall recovery of interferon activity was ca 60%.

Chromatography, Agarose↗

Physico-chemical characterization of hamster interferon.

The glycoprotein nature of Syrian hamster interferon was tested on several immobilized lectins. The specific retention of a small portion (20%) of interferon activity was observed only on concanavalin A-agarose; Component I of the interferon (not retained) has an apparent molecular weight of 23,500 whereas Component II (retained) is larger, 31,500. The apparent hydrophobicity of Syrian hamster interferon was probed by its chromatography on: (a) straight chain hydrocarbons of varied length; (b) aromatic ligands (aminobenzene, benzylamine, beta-phenylethylamine, gamma-phenyl-propylamine); ligands listed in (a) and (b) were immobilized to cyanogen bromide-activated agarose (isourea linkage); and (c) phenyl-agarose (Phenyl-Sepharose CL-4B), an aromatic ligand immobilized via a 2-hydroxypropyl arm to the agarose (ether linkage).

Animals↗

Copper chelate affinity chromatography of human fibroblast and leucocyte interferons.

Human fibroblast and human leucocyte interferons display a strong affinity for the copper chelate of bis-carboxymethyl amino agarose, binding tenaciously over a wide pH range (7.4 to 4.0). Their binding is apparently irreversible on a sorbent saturated with copper (24.8 mumol of Cu2+/ml of column bed). However, both interferons can be partially recovered from sorbents of lower copper content, prepared by leaching the columns with sodium citrate at pH 9.0. The recovery of fibroblast interferon from a leached sorbent (5.8 mumol of Cu2+/ml of column bed) is about 30% and that of leucocyte interferon about 60%. Moreover, the strength of binding of leucocyte interferon can be modulated by leaching copper chelate-agarose with citrate of varying concentration.

Cells, Cultured↗

Physico-chemical characterization and partial purification of mouse immune interferon.

Mouse immune (type T) interferon was produced from suspensions of spleen cells (1 X 10(7) cells/ml) treated with 3 micrograms/ml of phytohaemagglutinin. The crude interferon was chromatographed on four sorbents with varying affinities, namely concanavalin A-Sepharose, Affi-Gel 202, Blue Sepharose CL-6B and Phenyl-Sepharose CL-4B. With each of these the interferon activity was observed to have considerable heterogeneity. By means of affinity chromatography, mouse immune interferon was purified 100 to 200 times with concomitant complete recovery of activity.

Animals↗

Glycosylation of interferons. Effects of tunicamycin on human immune interferon.

Human immune interferon, induced in leukocytes by phytohemagglutinin, was prepared in the absence and presence of tunicamycin, an antibiotic which selectively inhibits the glycosylation of newly synthesized glycoproteins. Interferon preparations, produced in the absence of the antibiotic, displayed a considerable chromatographic heterogeneity on: (a) concanavalin A-agarose, (b) phenyl-agarose, (c) Cibacron Blue F3GA-agarose, and (d) polyuridylic acid-agarose. This heterogeneity was completely eliminated when tunicamycin (2 microgram/ml) was present during induction of interferon; all activity was then recovered in the breakthrough fractions from all sorbents. The level of interferon activity in leukocyte culture fluid was not affected by tunicamycin within the range of concentration 0.05 to 2.0 microgram/ml. These data indicate that (a) human immune interferon undergoes glycosylation, and tunicamycin is an effective inhibitor of this process. Thus, it appears that (b) at least some of the carbohydrates of human immune interferon are N-glycosidically linked. Moreover, it seems that (c) glycosylation is not necessary for an interferon molecule to either be secreted by the cell or (d) to express its antiviral function. Such properties of human immune interferon as (e) the apparent hydrophobicity and (f) an affinity for a polyribonucleotide are conferred only when its glycosylation is unimpaired.

Glucosamine↗

Molecular size heterogeneity of human leukocyte interferon.

Molecular sieving of human leukocyte interferon revealed an apparent molecular weight of 26,000. However, after denaturation by guanidine hydrochloride in the presence of a reducing agent and reactivation by extensive dialysis, a molecular weight of only 21,000 was observed. The reactivated human leukocyte interferon (mol wt 21,000) gave a single peak of activity when analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, confirming that a single molecular weight species was generated by the denaturation and reactivation procedure. A partial unfolding of the molecule was evident when the interferon preparation was heated to 50 degrees C in the absence or presence of an unfolding agent and then sieved on Sephadex G-100 Superfine. These results suggest that the interferon molecule undergoes a proteolytic cleavage probably by a protease present in extracellular fluid. Thus, a peptide fragment dissociates from the parent molecule when human leukocyte interferon is denatured in the presence of a reducing agent, resulting in a drop of 5,000 in molecular weight; interestingly, the resultant 21,000 molecular weight form still retains its antiviral activity.

Humans↗

Metal chelate affinity chromatography of hamster interferon.

Syrian hamster interferon, produced by benzo(a)pyrene-transformed embryo cells does not display an affinity for Zn++ chelate-agarose. However, the interferon binds to Cu++ chelate-agarose and can be displaced from the column by a falling pH-gradient. The chromatography of crude hamster interferon preparation on a tandem of columsn: Zn++ chelate-agarose in equilibrium Cu++ chelate-agarose results in a 25-fold purification of interferon.

Animals↗

Stabilization of human fibroblast interferon purified on concanavalin A-agarose.

Human fibroblast interferon, obtained by chromatography on concanavalin A-agarose, was stable for at least a month in 30--50 per cent ethylene glycol at 4 degrees, --20 degrees, and --70 degrees C. The succinct point of the present finding is that human fibroblast interferon may be stabilized by ethylene glycol alone without the addition of bovine serum albumin and 'back-contamination' of the interferon preparation.

Chromatography, Affinity↗

The interaction of mammalian interferons with immobilized cibacron blue F3GA: modulation of binding strength.

Mouse, hamster, rabbit, horse, and human interferons bind to immobilized Cibacron Blue F3GA under appropriate solvent conditions. Three forms of the immobilized ligand have been investigated: Cibacron Blue F3GA-Sepharose 4B, Blue Dextran-Sepharose 4B and Blue Sepharose CL-6B. The strength of binding of an interferon depends critically on the sorbent: Cibacron Blue F3GA-Sepharose 4B is the weakest in the series and Blue Sepharose CL-6B the strongest. The use of Blue Dextran-Sepharose 4B--a sorbent of intermediate binding properties--allows the complete separation of hamster, mouse and human fibroblast interferons in a single chromatographic step. Indeed, both the resolution, as well as the recovery, of those interferons is complete--regardless of the relative complexity of the chromatographed preparation (containing either crude or purified interferons). Thus, these ligands should prove of considerable use when a facile chromatographic evaluation, both qualitative and quantitative of mammalian interferons is required.

Animals↗

Hydrophobic interaction of human, mouse, and rabbit interferons with immobilized hydrocarbons.

Interferons of human, mouse, and rabbit origin bind to straight chain hydrocarbons immobilized on agarose. The hydrophobic nature of binding is established by the following observations: (a) a positive correlation between the length of hydrocarbon ligand and the strength of interaction; (b) a stronger interaction with hydrocarbon ligands terminated with apolar rather than polar head groups; (c) a lack of dependence of binding on ionic strength and pH of the solvent; (d) a reversal of binding by ethylene glycol, a hydrophobic solute; (e) an increasing eluting efficacy of tetraalkylammonium ions with the length of their alkyl substituents. The hydrophobic interactions of human interferon underlie the efficiency of two-step chromatographic procedures. For example, human embryo kidney interferon can be purified about 3,600-fold by sequential chromatography on (a) concanavalin A-agarose, (b) octyl-agarose. Another two-step procedure: (a) concanavalin A-agarose, (b) L-tryptophan-agarose, gives about 10,000-fold purification. The overall recovery of interferon in both cases in close to 90%.

Animals↗

Binding of human interferons to immobolized Cibacron Blue F3GA: The nature of molecular interaction.

Blue Dextran (Cibacron Blue F3GA-dextran) was immobilized on cyanogen bromide activated agarose and used as a ligand for human fibroblast and leukocyte interferons in a solvent of phosphate-buffered (pH 7.4), physiological saline (0.15 M NaCl). Fibroblast interferon binds completely and is not displaced from the column by an increase in ionic strength of the solvent (1.0 M NaCl); it can be, however, recovered with ethylene glycol, indicating the hydrophobic nature of interaction. Leukocyte interferon also binds to Blue Dextran-agarose but it can be recovered simply by an increase in the ionic strength of the solvent, indicating primarily the electrostatic nature of binding. Attempts to displace both interferons selectively with nucleosides and aromatic amino acids were unsuccessful. When Cibacron Blue F3GA is immobilized directly to agarose matrix or via molecular arm, the strength of binding of fibroblast interfern is significantly decreased, although ethylene glycol is still required for its displacement from the column. Leukocyte interferon, by contrast, does not bind at all under the same solvent conditions; it does bind when the pH value of the solvent is in the range 3-5 i.e., below its isoelectric point. Human fibroblast interferon binds completely to: aminobenzene, aminonaphthalene, and aminoanthracene, all immobilized on agarose, and it can be recovered with ethylene glycol. In contrast, human leukocyte interferon does not bind to benzene-agarose; it is retarded on naphthalene-agarose and completely retained on an anthracene-agarose column. All data point to a higher intrinsic hydrophobicity of human fibroblast interferon vis-á-vis human leukocyte interferon. Selective binding of human fibroblast interferon of Cibacron Blue F3GA-agarose results in a significant purification, about 800-fold.

Binding Sites↗

Interaction of human interferons with immobilized hydrophobic amino acids and dipeptides.

Human fibroblast interferon binds to L-tryptophan, D-tryptophan, L-phenylalanine, and L-tyrosine, all immobilized directly to cyanogen bromide-activated agarose, as well as to L-tryptophan and D-tryptophan methyl ester, both immobilized via molecular arms. The retention of fibroblast interferon is selective and results in a 2300-fold purification. Human leukocyte interferon binds neither to L-tryptophan attached directly to an agarose matrix nor to L-tryptophan immobilized via a molecular arm; it binds, however, to immobilized L-tryptophyl-L-tryptophan and L-tryptophyl-L-tryrosine. When retained, both interferons cannot be displaced unless ethylene glycol is included in the eluant, indicating a hydrophobic interaction. The interaction takes place under physiologic solvent conditions, thus revealing the high intrinsic hydrophobicity of both interferons.

Amino Acids↗

Binding of human fibroblast interferon to concanavalin A-agarose. Involvement of carbohydrate recognition and hydrophobic interaction.

Human fibroblast interferon binds to a concanavalin A-agarose (Con A-Sepharose) equilibrated with methyl alpha-D-mannopyranoside, or levan; in contrast, it is only partially retarded on a similar column equilibrated with ethylene glycol. Interferon does not bind, however, to a lectin column equilibrated with both methyl alpha-D-mannopyranoside and ethylene glycol. Thus, a hydrophobic interaction between fibroblast interferon and the immobilized lectin seems to account for a large portion of the binding forces involved. Other hydrophobic solutes, such as dioxane, 1, 2-propanediol, and tetraethylammonium chloride, were found equally or more efficient than ethylene glycol in displacing interferon from the lectin column. The elution pattern of interferon from a concanavalin A-agarose (Con A-Sepharose) column, at a constant ehtylene glycol concentration and with an increasing mannoside concentration, reveals the existence of four distinct interferon components. The selective adsorption to and elution from a concanavalin A-agarose (Con A-Sepharose) column resulted in about a 3000-fold purification of human fibroblast interferon and complete recovery of activity. The specific activity of the partially purified interferon preparation is about 5 X 10(7) units per mg of protein. The chromatographic behavior of human leukocyte interferon is remarkable in that it does not bind to concanavalin A-agarose at all indicating the absence of carbohydrate moieties recognizable by the lectin, or if present, their masked status. When concanavalin A was coupled to an agarose matrix (cyanogen bromide activated) at pH 8.0 and 6.0 human fibroblast interferon bound to both lectin-agarose adsorbents and could be recovered with methyl alpha-D-mannopyranoside. Concanavalin A, immobilized directly on agarose matrix at pH 8.0 and 6.0, thus displays only carbohydrate recognition toward interferon. By contrast, unless a hydrophobic solute was included in the solvent containing methyl mannoside, human fibroblast interferon could not be recovered from concanavalin A-agarose coupled at pH 9.0. When concanavalin A was immobilized via molecular arms, in tetrameric as well as dimeric forms, the binding of interferon again occurred exclusively through carbohydrate recognition. Thus, the hydrophobic interaction can be eliminated by appropriate immobilization of the lectin, and then adsorbed glycoproteins, as exemplified here by interferon, can be recovered readily with methyl mannoside alone.

Binding Sites↗

Purification and characterization of mouse interferon with novel affinity sorbents.

Several novel selective sorbents for mouse interferon are described that exploit the hydrophobic property and glycoprotein nature of this molecule. Low-molecular-weight ligands (hydrocarbons) and high-molecular-weight ligands (bovine serum albumin) immobilized on agarose bind selectively mouse L-cell interferon. The high selectivity of binding is due primarily to a hydrophobic effect, although electrostatic forces are also apparently involved. Mouse L-cell interferon binds to immobilized serum albumin and can be completely recovered by raising the ionic strength of the eluant. The specific activity of interferon preparations can be increased 2,000-fold to a value of 3 x 10(8) reference units per mg of protein in a single step with full recovery of the antiviral activity. A selective adsorption, although to a lesser degree, can be also obtained on hydrocarbon-coated agarose (Affi-Gel 202), resulting in 300-fold purification on desorption. The existence of two major components of mouse interferon was revealed upon its chromatography on the following sorbents: (i) bovine serum albumin-agarose, (ii) omega-carboxypentyl-agarose; and (iii) Bandeiraea simplicifolia lectin-agarose. This report thus provides for the first time a means for efficient and clear-cut separation of interferon components, thus enabling their further characterization.

Adsorption↗

Nature of the molecular heterogeneity of human leukocyte interferon.

The existence of two components of human leukocyte interferon has been recently reported. In the present study, the nature of this molecular heterogeneity was explored by affinity chromatography on immobilized micro- and macroligands, ion-exchange chromatography, and molecular sieving. Chromatography on a series of alkyl-agarose adsorbents shows, for the first time, the intrinsic hydrophobicity of human leukocyte interferon. Additionally, the separation of two interferon components is achieved by use of the alkyl-agarose as well as by the omega-aminoalkyl-agarose adsorbents. Clear-cut separation of the two components was also achieved by chromatography on BSA-CH-Sepharose and on DEAE-Bio Gel A. An important feature of these separations is that they do not require the use of denaturing conditions. The molecular weights of the leukocyte interferon components, as determined on Sephadex G-75, are quite similar or identical, approximately 26,000. Thus, the molecular heterogeneity of human leukocyte interferon can be attributed, at least in part, to differences in the hydrophobicity and ionic properties of its two components.

Chromatography, Affinity↗

Hydrophobic binding sites on human interferon.

Human interferon binds to a omega-carboxpentyl-agarose column at low ionic strength (0.15 M NaCl) and is still retained when the ionic strength is raised (to 1.0 M NaCl). The binding can be reversed, however, by ethylene glycol, indicating a hydrophobic interaction. The binding of human interferon to omega-aminohexyl-agarose is weak, even at a low ionic strength, and is probably exclusively electrostatic. This disparate binding behavior may be caused by the presence of a positive charge, adjacent to the hydrophobic binding site, on human interferon. The interaction of human interferon with omega-carboxypentyl-agarose is quite selective, inasmuch as the majority of proteins present in interferon preparations pass through the column unretained. Hydrophobic chromatography of human interferon may thus be useful in its purification.

Binding Sites↗