PubMed Health⌕ Search

Biomedical subjects

E T O'Toole

Publications and source records attributed to E T O'Toole.

14 recordsLinked to original sources
PubMed2003

Cryoimmobilization and three-dimensional visualization of C. elegans ultrastructure.

Caenorhabditis elegans is one of the most important genetic systems used in current biological research. Increasingly, these genetics-based research projects are including ultrastructural analyses in their attempts to understand the molecular basis for cell function. Here, we present and review state-of-the-art methods for both ultrastructural analysis and immunogold localization in C. elegans. For the initial cryofixation, high-pressure freezing is the method of choice, and in this article we describe two different strategies to prepare these nematode worms for rapid freezing. The first method takes advantage of transparent, porous cellulose capillary tubes to contain the worms, and the second packs the worms in E. coli and/or yeast paste prior to freezing. The latter method facilitates embedding of C. elegans in a thin layer of resin so individual worms can be staged, selected and precisely orientated for serial sectioning followed by immunolabelling or electron tomography.

Animals↗
PubMed2001

The spindle cycle in budding yeast.

The mitotic spindle of the budding yeast Saccharomyces cerevisiae will probably be the first such organelle to be understood in molecular detail. Here we describe the mitotic spindle cycle of budding yeast using electron-microscope-derived structures and dynamic live-cell imaging. Recent work has revealed that many general aspects of mitosis are conserved, making budding yeast an excellent model for the study of mitosis.

Anaphase↗
PubMed2000

Insights into the structural organization of the I1 inner arm dynein from a domain analysis of the 1beta dynein heavy chain.

To identify domains in the dynein heavy chain (Dhc) required for the assembly of an inner arm dynein, we characterized a new motility mutant (ida2-6) obtained by insertional mutagenesis. ida2-6 axonemes lack the polypeptides associated with the I1 inner arm complex. Recovery of genomic DNA flanking the mutation indicates that the defects are caused by plasmid insertion into the Dhc10 transcription unit, which encodes the 1beta Dhc of the I1 complex. Transformation with Dhc10 constructs encoding <20% of the Dhc can partially rescue the motility defects by reassembly of an I1 complex containing an N-terminal 1beta Dhc fragment and a full-length 1alpha Dhc. Electron microscopic analysis reveals the location of the missing 1beta Dhc motor domain within the axoneme structure. These observations, together with recent studies on the 1alpha Dhc, identify a Dhc domain required for complex assembly and further demonstrate that the intermediate and light chains are associated with the stem regions of the Dhcs in a distinct structural location. The positioning of these subunits within the I1 structure has significant implications for the pathways that target the assembly of the I1 complex into the axoneme and modify the activity of the I1 dynein during flagellar motility.

Alleles↗
PubMed1999

High-voltage electron tomography of spindle pole bodies and early mitotic spindles in the yeast Saccharomyces cerevisiae.

The spindle pole body (SPB) is the major microtubule-organizing center of budding yeast and is the functional equivalent of the centrosome in higher eukaryotic cells. We used fast-frozen, freeze-substituted cells in conjunction with high-voltage electron tomography to study the fine structure of the SPB and the events of early spindle formation. Individual structures were imaged at 5-10 nm resolution in three dimensions, significantly better than can be achieved by serial section electron microscopy. The SPB is organized in distinct but coupled layers, two of which show ordered two-dimensional packing. The SPB central plaque is anchored in the nuclear envelope with hook-like structures. The minus ends of nuclear microtubules (MTs) are capped and are tethered to the SPB inner plaque, whereas the majority of MT plus ends show a distinct flaring. Unbudded cells containing a single SPB retain 16 MTs, enough to attach to each of the expected 16 chromosomes. Their median length is approximately 150 nm. MTs growing from duplicated but not separated SPBs have a median length of approximately 130 nm and interdigitate over the bridge that connects the SPBs. As a bipolar spindle is formed, the median MT length increases to approximately 300 nm and then decreases to approximately 30 nm in late anaphase. Three-dimensional models confirm that there is no conventional metaphase and that anaphase A occurs. These studies complement and extend what is known about the three-dimensional structure of the yeast mitotic spindle and further our understanding of the organization of the SPB in intact cells.

Cell Nucleus↗
PubMed1997

Three-dimensional analysis and ultrastructural design of mitotic spindles from the cdc20 mutant of Saccharomyces cerevisiae.

The three-dimensional organization of mitotic microtubules in a mutant strain of Saccharomyces cerevisiae has been studied by computer-assisted serial reconstruction. At the nonpermissive temperature, cdc20 cells arrested with a spindle length of approximately 2.5 microns. These spindles contained a mean of 81 microtubules (range, 56-100) compared with 23 in wild-type spindles of comparable length. This increase in spindle microtubule number resulted in a total polymer length up to four times that of wild-type spindles. The spindle pole bodies in the cdc20 cells were approximately 2.3 times the size of wild-type, thereby accommodating the abnormally large number of spindle microtubules. The cdc20 spindles contained a large number of interpolar microtubules organized in a "core bundle." A neighbor density analysis of this bundle at the spindle midzone showed a preferred spacing of approximately 35 nm center-to-center between microtubules of opposite polarity. Although this is evidence of specific interaction between antiparallel microtubules, mutant spindles were less ordered than the spindle of wild-type cells. The number of noncore microtubules was significantly higher than that reported for wild-type, and these microtubules did not display a characteristic metaphase configuration. cdc20 spindles showed significantly more cross-bridges between spindle microtubules than were seen in the wild type. The cross-bridge density was highest between antiparallel microtubules. These data suggest that spindle microtubules are stabilized in cdc20 cells and that the CDC20 gene product may be involved in cell cycle processes that promote spindle microtubule disassembly.

Cdc20 Proteins↗
PubMed1995

Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle.

The three dimensional organization of microtubules in mitotic spindles of the yeast Saccharomyces cerevisiae has been determined by computer-aided reconstruction from electron micrographs of serially cross-sectioned spindles. Fifteen spindles ranging in length from 0.6-9.4 microns have been analyzed. Ordered microtubule packing is absent in spindles up to 0.8 micron, but the total number of microtubules is sufficient to allow one microtubule per kinetochore with a few additional microtubules that may form an interpolar spindle. An obvious bundle of about eight interpolar microtubules was found in spindles 1.3-1.6 microns long, and we suggest that the approximately 32 remaining microtubules act as kinetochore fibers. The relative lengths of the microtubules in these spindles suggest that they may be in an early stage of anaphase, even though these spindles are all situated in the mother cell, not in the isthmus between mother and bud. None of the reconstructed spindles exhibited the uniform populations of kinetochore microtubules characteristic of metaphase. Long spindles (2.7-9.4 microns), presumably in anaphase B, contained short remnants of a few presumed kinetochore microtubules clustered near the poles and a few long microtubules extending from each pole toward the spindle midplane, where they interdigitated with their counterparts from the other pole. Interpretation of these reconstructed spindles offers some insights into the mechanisms of mitosis in this yeast.

Anaphase↗
PubMed1994

Localization of fibrinogen during aggregation of avian thrombocytes.

The thrombocyte is the avian equivalent of the mammalian blood platelet and is involved in hemostasis through a fibrinogen-mediated process. Although fibrinogen has been implicated as a molecular bridge between activated cells during aggregation, the location of this molecule and its receptor on thrombocytes has not been characterized. Pigeon fibrinogen, isolated from plasma by precipitation with PEG-1000 and purified over Sepharose 4B, was used to study receptor-ligand interaction. Separation of pigeon fibrinogen on SDS-PAGE resulted in three peptides of molecular mass 62, 55, and 47 kDa, which were comparable to those of human fibrinogen. The role of fibrinogen and its receptor in thrombocyte function was established by turbidimetric aggregation using thrombin as an agonist under conditions requiring Ca2+ and fibrinogen. Maximum response occurred using 3 mM Ca2+ and 100 micrograms/ml fibrinogen. Fibrinogen-dependent aggregation was inhibited by an anti-GPIIb antibody, verifying a role for fibrinogen receptors in thrombocyte function. Fibrinogen-gold conjugates were used to describe receptor and ligand localization on aggregated cells. Computer reconstruction was used to verify relocalization of fibrinogen receptors following activation. Fibrinogen distribution changed from a dispersed state in preactivated cells to focal localization at points of cell contact and along pseudopods following activation. This selective positioning of fibrinogen suggests that a functional relocalization of the receptor occurs upon thrombocyte activation, and this relocation facilitates the role of fibrinogen as a molecular bridge. These studies establish similarities between the avian and the human systems and document the conserved nature of the hemostatic process.

Animals↗
PubMed1994

The bop2-1 mutation reveals radial asymmetry in the inner dynein arm region of Chlamydomonas reinhardtii.

Strains of Chlamydomonas reinhardtii with a mutant allele at the BOP2 locus swim slowly and have an abnormal flagellar waveform similar to previously identified strains with defects in the inner arm region. Double mutant strains with the bop2-1 allele and any of 17 different mutations that affect the dynein arm region swim more slowly than either parent, which suggests that the bop2-1 mutation does not affect solely the outer dynein arms, the I1 or ida4 inner dynein arms, or the dynein regulatory complex. Flagellar axonemes isolated from bop2-1 cells are missing a phosphorylated polypeptide of 152 kD. Electron microscopic analysis shows that bop2-1 axonemes are missing density in the inner dynein arm region. Surprisingly, two populations of images were observed in longitudinal sections of axonemes from the bop2-1 strain. In the 10 longitudinal axonemes examined, a portion of the dynein regulatory complex and a newly identified structure, the projection, are affected. In five of these 10 longitudinal axonemes examined, two lobes of the ida4 inner arm are also missing. By examining the cross-sectional images of wild-type and bop2-1 axonemes at each outer doublet position around the axoneme, we have determined that the bop2-1 mutation affects the assembly of inner arm region components in a doublet specific manner. Doublets 5, 6, and 8 have the most severe deficiency, doublet 9 has an intermediate phenotype, and doublets 2, 3, 4, and 7 have the least severe phenotype. The bop2-1 mutation provides the first evidence of radial asymmetry in the inner dynein arm region.

Animals↗
PubMed1992

Kinetochore microtubules in PTK cells.

We have analyzed the fine structure of 10 chromosomal fibers from mitotic spindles of PtK1 cells in metaphase and anaphase, using electron microscopy of serial thin sections and computer image processing to follow the trajectories of the component microtubules (MTs) in three dimensions. Most of the kinetochore MTs ran from their kinetochore to the vicinity of the pole, retaining a clustered arrangement over their entire length. This MT bundle was invaded by large numbers of other MTs that were not associated with kinetochores. The invading MTs frequently came close to the kinetochore MTs, but a two-dimensional analysis of neighbor density failed to identify any characteristic spacing between the two MT classes. Unlike the results from neighbor density analyses of interzone MTs, the distributions of spacings between kinetochore MTs and other spindle MTs revealed no evidence for strong MT-MT interactions. A three-dimensional analysis of distances of closest approach between kinetochore MTs and other spindle MTs has, however, shown that the most common distances of closest approach were 30-50 nm, suggesting a weak interaction between kinetochore MTs and their neighbors. The data support the ideas that kinetochore MTs form a mechanical connection between the kinetochore and the pericentriolar material that defines the pole, but that the mechanical interactions between kinetochore MTs and other spindle MTs are weak.

Anaphase↗
PubMed1992

Arrangement of inner dynein arms in wild-type and mutant flagella of Chlamydomonas.

We have used computer averaging of electron micrographs from longitudinal and cross-sections of wild-type and mutant axonemes to determine the arrangement of the inner dynein arms in Chlamydomonas reinhardtii. Based on biochemical and morphological data, the inner arms have previously been described as consisting of three distinct subspecies, I1, I2, and I3. Our longitudinal averages revealed 10 distinguishable lobes of density per 96-nm repeating unit in the inner row of dynein arms. These lobes occurred predominantly but not exclusively in two parallel rows. We have analyzed mutant strains that are missing I1 and I2 subspecies. Cross-sectional averages of pf9 axonemes, which are missing the I1 subspecies, showed a loss of density in both the inner and outer portions of the inner arm. Averages from longitudinal images showed that three distinct lobes were missing from a single region; two of the lobes were near the outer arms but one was more inward. Serial 24-nm cross-sections of pf9 axonemes showed a complete gap at the proximal end of the repeating unit, confirming that the I1 subunit spans both inner and outer portions of the inner arm region. Examination of pf23 axonemes, which are missing both I1 and I2 subspecies, showed an additional loss almost exclusively in the inner portion of the inner arm. In longitudinal view, this additional loss occurred in three separate locations and consisted of three inwardly placed lobes, one adjacent to each of the two radial spokes and the third at the distal end of the repeating unit. These same lobes were absent ida4 axonemes, which lack only the I2 subspecies. The I2 subspecies thus does not consist of a single dynein arm subunit in the middle of the repeating unit. The radial spoke suppressor mutation, pf2, is missing four polypeptides of previously unknown location. Averages of these axonemes were missing a portion of the structures remaining in pf23 axonemes. This result suggests that polypeptides of the radial spoke control system are close to the inner dynein arms.

Animals↗
PubMedDate not supplied

Life cycles of yeast spindle pole bodies: getting microtubules into a closed nucleus.

The spindle pole body (SPB) is the principal microtubule organizing center of budding and fission yeast. We have examined SPBs and their associated microtubules from both organisms, using electron microscopy and three-dimensional reconstruction techniques, to identify the structural changes that accompany progression through the cell cycle. In this report, we compare these changes in the two kinds of yeasts and present a model for how microtubules get into a closed nucleus.

Cell Cycle↗