Biomedical subjects

E Verpoorte

Publications and source records attributed to E Verpoorte.

6 recordsLinked to original sources

PubMed2001

Surface biopassivation of replicated poly(dimethylsiloxane) microfluidic channels and application to heterogeneous immunoreaction with on-chip fluorescence detection.

Poly(dimethylsiloxane) (PDMS) appeared recently as a material of choice for rapid and accurate replication of polymer-based microfluidic networks. However, due to its hydrophobicity, the surface strongly interacts with apolar analytes or species containing apolar domains, resulting in significant uncontrolled adsorption on channel walls. This contribution describes the application and characterization of a PDMS surface treatment that considerably decreases adsorption of low and high molecular mass substances to channel walls while maintaining a modest cathodic electroosmotic flow. Channels are modified with a three-layer biotin-neutravidin sandwich coating, made of biotinylated IgG, neutravidin, and biotinylated dextran. By replacing biotinylated dextran with any biotinylated reagent, the modified surface can be readily patterned with biochemical probes, such as antibodies. Combination of probe immobilization chemistry with low nonspecific binding enables affinity binding assays within channel networks. The example of an electrokinetic driven, heterogeneous immunoreaction for human IgG is described.

Dimethylpolysiloxanes↗

PubMed2001

Electrokinetically driven microfluidic chips with surface-modified chambers for heterogeneous immunoassays.

This article presents the first example of a microfluidic chip for heterogeneous bioassays using a locally immobilized biospecific layer and operated electrokinetically. The reaction chamber has picoliter dimensions and is integrated into a network of microchannels etched in glass. The high affinity of protein A (PA) for rabbit immunoglobulin G (rIgG) was exploited for chip testing, with PA being immobilized on microchannel walls and fluorescently labeled (Cy5) rIgG serving as sample. It was possible to operate the chip in an immunoaffinity chromatographic manner, using electrokinetically pumped solutions. Concentration of antibody from dilute solution onto the solid phase was demonstrated, with signal gains of approximately 30 possible. A dose-response curve for Cy5-rIgG was obtained for concentrations down to 50 nM, for an incubation time of 200 s. The flexibility of chip layout was demonstrated for competitive immunoassay of rIgG, using both a combined sample/tracer incubation and sequential addition of these solutions. With assay times generally below 5 min for this unoptimized device, the microfluidic approach described shows great potential for many high-throughput screening applications.

Carbocyanines↗

PubMed2001

Sample preconcentration by field amplification stacking for microchip-based capillary electrophoresis.

A microchip structure for field amplification stacking (FAS) was developed, which allowed the formation of comparatively long, volumetrically defined sample plugs with a minimal electrophoretic bias. Up to 20-fold signal gains were achieved by injection and separation of 400 microm long plugs in a 7.5 cm long channel. We studied fluidic effects arising when solutions with mismatched ionic strengths are electrokinetically handled on microchips. In particular, the generation of pressure-driven Poiseuille flow effects in the capillary system due to different electroosmotic flow velocities in adjacent solution zones could clearly be observed by video imaging. The formation of a sample plug, stacking of the analyte and subsequent release into the separation column showed that careful control of electric fields in the side channels of the injection element is essential. To further improve the signal gain, a new chip layout was developed for full-column stacking with subsequent sample matrix removal by polarity switching. The design features a coupled-column structure with separate stacking and capillary electrophoresis (CE) channels, showing signal enhancements of up to 65-fold for a 69 mm long stacking channel.

Adsorption↗

PubMed2001

Multi-layer microfluidic glass chips for microanalytical applications.

A new, versatile architecture is presented for microfluidic devices made entirely from glass, for use with reagents which would prove highly corrosive for silicon. Chips consist of three layers of glass wafers bonded together by fusion bonding. On the inside wafer faces a network of microfluidic channels is created by photolithography and wet chemical etching. Low dead-volume fluidic connections between the layers are fabricated by spark-assisted etching (SAE), a computer numerical controlled (CNC)-like machining technique new to microfluidic system fabrication. This method is also used to form a vertical, long path-length, optical cuvette through the middle wafer for optical absorbance detection of low-concentration compounds. Advantages of this technique compared with other, more standard, methods are discussed. When the new glass-based device for flow-injection analysis of ammonia was compared with our first-generation chips based on silicon micromachining, concentration sensitivity was higher, because of the longer path-length of the optical cuvette. The dependence of dispersion on velocity profile and on channel cross-sectional geometry is discussed. The rapid implementation of the devices for an organic synthesis reaction, the Wittig reaction, is also briefly described.

Journal Article↗

PubMed1997

Novel instrumentation for real-time monitoring using miniaturized flow systems with integrated biosensors.

A prototype miniaturized Total Chemical Analysis System (muTAS) has been developed and applied to on-line monitoring of glucose and lactate in the core blood of anaesthetized dogs. The system consists of a highly efficient microdialysis sampling interface sited in a small-scale extracorporeal shunt circuit ('MiniShunt'), a silicon machined microflow manifold and integrated biosensor array for glucose and lactate detection with associated computer software for analytical process control. During in-vivo testing the device allowed real-time on-screen monitoring of glucose and lactate with system response times of less than 5 min, made possible by the small dead volume of the microflow system. On-line glucose and lactate measurements were made in the basal state as well as during intravenous infusion of glucose or lactate. The prototype muTAS is currently suitable for trend monitoring but refinements are necessary before application of the system for determination of individual lactate values.

Animals↗

PubMed1996

Micellar electrokinetic chromatography separations and analyses of biological samples on a cyclic planar microstructure.

Micellar electrokinetic capillary chromatography (MECC) separations and analyses of biological samples on a planar glass microchip capillary electrophoresis device with laser-induced fluorescence solute detection are discussed. A cyclic channel system which permits dead volume free repeated column switching and thus the use of various channel lengths together with a relatively low applied separation voltage is described. It features an unbiased, dead volume free electrokinetic sample inlet system of approximately 12 pL. Because of the small cross section and favorable heat dissipation in glass microstructures, MECC separations with an electric field strength of up to 2000 V/cm achieving efficiencies of submicrometer plate heights can be performed. After a separation length of 2 cm, six fluorescein isothiocyanate labeled amino acids are shown to be separable within a few seconds and with an imprecision for peak areas (or heights) and detection times of < 2% and < 0.5%, respectively. Without application of electrokinetic solute stacking, the detection limit of fluorescein isothiocyanate labeled arginine is 3.3 nM, corresponding to approximately 40 zmol injected. Furthermore, the feasibility of directly applying human urine and serum samples onto the uncoated channel system is demonstrated and first data of the successful performance of a chip-based MECC immunoassay for serum theophylline are presented. Compared to MECC in conventional fused-silica capillaries, MECC analyses on microchips can be performed 1-2 orders of magnitude faster, with higher efficiency and at no expense of accuracy and precision. Furthermore, versatility is shown to be much increased with the use of a cyclic rather than a single-path channel system. The MECC separation efficiency of fluorescein isothiocyanate labeled amino acids is shown to be comparable to that obtained by gel electrophoresis performed in the same chip layout.

Amino Acids↗