PubMed Health⌕ Search

Biomedical subjects

Edward H Egelman

Publications and source records attributed to Edward H Egelman.

At least 19 recordsLinked to original sources

Mapping the interaction of cofilin with subdomain 2 on actin.

Cofilin, a member of the actin-depolymerizing factor (ADF)/cofilin family of proteins, is a key regulator of actin dynamics. Cofilin binds to monomer (G-) and filamentous (F-) actin, severs the filaments, and increases their turnover rate. Electron microscopy studies suggested cofilin interactions with subdomains 2 and 1/3 on adjacent actin protomers in F-actin. To probe for the presence of a cryptic cofilin binding site in subdomain 2 in G-actin, we used transglutaminase-mediated cross-linking, which targets Gln41 in subdomain 2. The cross-linking proceeded with up to 85% efficiency with skeletal alpha-actin and WT yeast actin, yielding a single product corresponding to a 1:1 actin-cofilin complex but was strongly inhibited in Q41C yeast actin (in which Q41 was substituted with cysteine). LC-MS/MS analysis of the proteolytic fragments of this complex mapped the cross-linking to Gln41 on actin and Gly1 on recombinant yeast cofilin. The actin-cofilin (AC) heterodimer was purified on FPLC for analytical ultracentrifugation and electron microscopy analysis. Sedimentation equilibrium and velocity runs revealed oligomers of AC in G-actin buffer. In the presence of excess cofilin, the covalent AC heterodimer bound a second cofilin, forming a 2:1 cofilin/actin complex, as revealed by sedimentation results. Under polymerizing conditions the cross-linked AC formed mostly short filaments, which according to image reconstruction were similar to uncross-linked actin-cofilin filaments. Although a majority of the cross-linking occurs at Gln41, a small fraction of the AC cross-linked complex forms in the Q41C yeast actin mutant. This secondary cross-linking site was sequenced by MALDI-MS/MS as linking Gln360 in actin to Lys98 on cofilin. Overall, these results demonstrate that the region around Gln41 (subdomain 2) is involved in a weak binding of cofilin to G-actin.

Actin Depolymerizing Factors↗

Type IV pilus structure by cryo-electron microscopy and crystallography: implications for pilus assembly and functions.

Type IV pili (T4P) are long, thin, flexible filaments on bacteria that undergo assembly-disassembly from inner membrane pilin subunits and exhibit astonishing multifunctionality. Neisseria gonorrhoeae (gonococcal or GC) T4P are prototypic virulence factors and immune targets for increasingly antibiotic-resistant human pathogens, yet detailed structures are unavailable for any T4P. Here, we determined a detailed experimental GC-T4P structure by quantitative fitting of a 2.3 A full-length pilin crystal structure into a 12.5 A resolution native GC-T4P reconstruction solved by cryo-electron microscopy (cryo-EM) and iterative helical real space reconstruction. Spiraling three-helix bundles form the filament core, anchor the globular heads, and provide strength and flexibility. Protruding hypervariable loops and posttranslational modifications in the globular head shield conserved functional residues in pronounced grooves, creating a surprisingly corrugated pilus surface. These results clarify T4P multifunctionality and assembly-disassembly while suggesting unified assembly mechanisms for T4P, archaeal flagella, and type II secretion system filaments.

Amino Acid Sequence↗

The iterative helical real space reconstruction method: surmounting the problems posed by real polymers.

Many important biological macromolecules exist as helical polymers. Examples are actin, tubulin, myosin, RecA, Rad51, flagellin, pili, and filamentous bacteriophage. The first application of three-dimensional reconstruction from electron microscopic images was to a helical polymer, and a number of laboratories today are using helical tubes of integral membrane proteins for solving the structure of these proteins in the electron microscope at near atomic resolution. We have developed a method to analyze and reconstruct electron microscopic images of macromolecular helical polymers, the iterative helical real space reconstruction (IHRSR) algorithm. We can show that when there is disorder or heterogeneity, when the specimens diffract weakly, or when Bessel functions overlap, we can do far better with our method than can be done using traditional Fourier-Bessel approaches. In many cases, structures that were not even amenable to analysis can be solved at fairly high resolution using our method. The problems inherent in the traditional approach are discussed, and examples are presented illustrating how the IHRSR approach surmounts these problems.

Actin Cytoskeleton↗

The structure of a filamentous bacteriophage.

Many thin helical polymers, including bacterial pili and filamentous bacteriophage, have been seen as refractory to high-resolution studies by electron microscopy. Studies of the quaternary structure of such filaments have depended upon techniques such as modeling or X-ray fiber diffraction, given that direct visualization of the subunit organization has not been possible. We report the first image reconstruction of a filamentous virus, bacteriophage fd, by cryoelectron microscopy. Although these thin ( approximately 70 A in diameter) rather featureless filaments scatter weakly, we have been able to achieve a nominal resolution of approximately 8 A using an iterative helical reconstruction procedure. We show that two different conformations of the virus exist, and that in both states the subunits are packed differently than in conflicting models previously proposed on the basis of X-ray fiber diffraction or solid-state NMR studies. A significant fraction of the population of wild-type fd is either disordered or in multiple conformational states, while in the presence of the Y21M mutation, this heterogeneity is greatly reduced, consistent with previous observations. These results show that new computational approaches to helical reconstruction can greatly extend the ability to visualize heterogeneous protein polymers at a reasonably high resolution.

Bacteriophage M13↗

The CH-domain of calponin does not determine the modes of calponin binding to F-actin.

Many actin-binding proteins have been observed to have a modular architecture. One of the most abundant modules is the calponin-homology (CH) domain, found as tandem repeats in proteins that cross-link actin filaments (such as fimbrin, spectrin and alpha-actinin) or link the actin cytoskeleton to intermediate filaments (such as plectin). In proteins such as the eponymous calponin, IQGAP1, and Scp1, a single CH-domain exists, but there has been some controversy over whether this domain binds to actin filaments. A previous three-dimensional reconstruction of the calponin-F-actin complex has led to the conclusion that the visualized portion of calponin bound to actin belongs to its amino-terminal homology (CH) domain. We show, using a calponin fragment lacking the CH-domain, that this domain is not bound to F-actin, and cannot be positioning calponin on F-actin as hypothesized. Further, using classification methods, we show a multiplicity in cooperative modes of binding of calponin to F-actin, similar to what has been observed for other actin-binding proteins such as tropomyosin and cofilin. Our results suggest that the form and function of the structurally conserved CH-domain found in many other actin-binding proteins have diverged. This has broad implications for inferring function from the presence of structurally conserved domains.

Actins↗

The Rad51/RadA N-terminal domain activates nucleoprotein filament ATPase activity.

Proteins in the RecA/RadA/Rad51 family form helical filaments on DNA that function in homologous recombination. While these proteins all have the same highly conserved ATP binding core, the RadA/Rad51 proteins have an N-terminal domain that shows no homology with the C-terminal domain found in RecA. Both the Rad51 N-terminal and RecA C-terminal domains have been shown to bind DNA, but no role for these domains has been established. We show that RadA filaments can be trapped in either an inactive or active conformation with respect to the ATPase and that activation involves a large rotation of the subunit aided by the N-terminal domain. The G103E mutation within the yeast Rad51 N-terminal domain inactivates the filament by failing to make proper contacts between the N-terminal domain and the core. These results show that the N-terminal domains play a regulatory role in filament activation and highlight the modular architecture of the recombination proteins.

Adenosine Triphosphatases↗

Structural polymorphism in bacterial EspA filaments revealed by cryo-EM and an improved approach to helical reconstruction.

The traditional Fourier-Bessel approach to three-dimensional reconstruction from electron microscopic (EM) images of helical polymers involves averaging over filaments, assuming a homogeneous structure and symmetry. We have used a real-space reconstruction approach to study the EspA filaments formed by enteropathogenic E. coli. In negative stain, the symmetry of these filaments is ambiguous, and we suggest that such ambiguities may be more prevalent than realized. Using cryo-EM of frozen-hydrated filaments, we find that these filaments have a fixed twist with 5.6 subunits per turn but an axial rise per subunit that varies from about 3.6 A to 5.6 A. Reconstructions at approximately 15 A resolution show a switching between the more compressed and extended filaments in the packing of putative alpha helices around the hollow lumen. Outside of a crystal, where there is nothing to maintain long-range order, the structural polymorphism in helical polymers may be much greater than has been assumed.

Cryoelectron Microscopy↗

Xin-repeats and nebulin-like repeats bind to F-actin in a similar manner.

Xin and nebulette are striated muscle-specific actin-binding proteins that both contain multiple actin-binding repeats. The nature of these repeats is different: nebulette has nebulin-like repeats, while Xin contains its own unique repeats. However, the suggestion was made from biochemical data that the Xin-repeats may bind to multiple sites on the actin molecule as was found for nebulin. We have used electron microscopy and the iterative helical real space reconstruction to visualize complexes of F-actin with Xin fragments containing either three or six Xin-repeats, and with the CN5-nebulette fragment, containing five nebulin-like repeats. Our results indicate that Xin and nebulette fragments bind to F-actin in a similar manner and in two distinct modes: in one mode actin subdomain 1 is bound, while in the second mode the binding bridges between a different site on actin subdomains 1/2 of one protomer and subdomains 3/4 of an adjacent actin protomer. Taken together with published data about nebulin, tropomyosin and ADF/cofilin, our results suggest that the ability to bind in multiple modes to the actin protomer is a general property of many actin-binding proteins.

Actins↗

Atomic model of a myosin filament in the relaxed state.

Contraction of muscle involves the cyclic interaction of myosin heads on the thick filaments with actin subunits in the thin filaments. Muscles relax when this interaction is blocked by molecular switches on either or both filaments. Insight into the relaxed (switched OFF) structure of myosin has come from electron microscopic studies of smooth muscle myosin molecules, which are regulated by phosphorylation. These studies suggest that the OFF state is achieved by an asymmetric, intramolecular interaction between the actin-binding region of one head and the converter region of the other, switching both heads off. Although this is a plausible model for relaxation based on isolated myosin molecules, it does not reveal whether this structure is present in native myosin filaments. Here we analyse the structure of a phosphorylation-regulated striated muscle thick filament using cryo-electron microscopy. Three-dimensional reconstruction and atomic fitting studies suggest that the 'interacting-head' structure is also present in the filament, and that it may underlie the relaxed state of thick filaments in both smooth and myosin-regulated striated muscles over a wide range of species.

Animals↗

BRCA2 BRC motifs bind RAD51-DNA filaments.

Germ-line mutations in BRCA2 account for approximately half the cases of autosomal dominant familial breast cancers. BRCA2 has been shown to interact directly with RAD51, an essential component of the cellular machinery for homologous recombination and the maintenance of genome stability. Interactions between BRCA2 and RAD51 take place by means of the conserved BRC repeat regions of BRCA2. Previously, it was shown that peptides corresponding to BRC3 or BRC4 bind RAD51 monomers and block RAD51-DNA filament formation. In this work, we further analyze these interactions and find that at lower molar ratios BRC3 or BRC4 actually bind and form stable complexes with RAD51-DNA nucleoprotein filaments. Only at high concentrations of the BRC repeats are filaments disrupted. The specific protein-protein contacts occur in the RAD51 filament by means of the N-terminal domain of RAD51 for BRC3 and the nucleotide-binding core of RAD51 for BRC4. These observations show that the BRC repeats bind distinct regions of RAD51 and are nonequivalent in their mode of interaction. The results provide insight into why mutation in just one of the eight BRC repeats would affect the way that BRCA2 protein interacts with the RAD51 filament. Disruption of a single RAD51 interaction site, one of several simultaneous interactions occurring throughout the BRC repeat-containing exon 11 of BRCA2, might modulate the ability of RAD51 to promote recombinational repair and lead to an increased risk of breast cancer.

BRCA2 Protein↗

Structural polymorphism of Methanothermobacter thermautotrophicus MCM.

The minichromosome maintenance (MCM) proteins are essential for replication initiation and elongation in eukarya and archaea. There are six MCM proteins in eukaryotes, and MCM complexes are believed to unwind DNA during chromosomal DNA replication. However, the mechanism and structure of the MCM complexes are not known. Only one MCM is found in the archaeon Methanothermobacter thermautotrophicus (mtMCM), and this provides a simpler system for study. The crystal structure of a mtMCM N-terminal fragment has been solved, but surprisingly only subtle structural changes were seen between the wild-type protein and one having a mutation corresponding to the yeast MCM5 bob1 mutation. The bob1 mutation bypasses the phosphorylation required for activation of MCM in yeast. We have used electron microscopy and three-dimensional reconstruction to examine a number of different fragments of mtMCM, and can visualize a large conformational change within the N-terminal fragment. This offers new insight into the conformational dynamics of MCM and the phosphorylation-bypass phenotype in yeast.

Crystallography, X-Ray↗

Refining the structure of the Halobacterium salinarum flagellar filament using the iterative helical real space reconstruction method: insights into polymorphism.

The eubacterial flagellar filament is an external, self-assembling, helical polymer approximately 220 A in diameter constructed from a highly conserved monomer, flagellin, which polymerizes externally at the distal end. The archaeal filament is only approximately 100 A in diameter, assembles at the proximal end and is constructed from different, glycosylated flagellins. Although the phenomenology of swimming is similar to that of eubacteria, the symmetry of the archebacterial filament is entirely different. Here, we extend our previous study on the flagellar coiled filament structure of strain R1M1 of Halobacterium salinarum. We use strain M175 of H.salinarum, which forms poly-flagellar bundles at high yield which, under conditions of relatively low ionic-strength (0.8 M versus 5 M) and low pH ( approximately 2.5 versus approximately 6.8), form straight filaments. We demonstrated previously that a single-particle approach to helical reconstruction has many advantages over conventional Fourier-Bessel methods when dealing with variable helical symmetry and heterogeneity. We show here that when this method is applied to the ordered helical structure of the archebacterial uncoiled flagellar filament, significant extensions in resolution can be obtained readily when compared to applying traditional helical techniques. The filament population can be separated into classes of different morphologies, which may represent polymorphic states. Using cryo-negatively stained images, a resolution of approximately 10-15 A has been achieved. Single alpha-helices can be fit into the reconstruction, supporting the proposed similarity of the structure to that of type IV bacterial pili.

Biopolymers↗

The Arg non-receptor tyrosine kinase modifies F-actin structure.

The Arg (Abl-related gene) protein belongs to the Abl family of non-receptor tyrosine kinases that regulate cell motility and morphogenesis. It contains two actin-binding domains, one containing the talin-like I/LWEQ motif, and a C-terminal calponin homology (CH) domain. We used electron microscopy and single particle image analysis to reconstruct complexes of F-actin with full-length Arg, and fragments lacking either the I/LWEQ or CH domains. The Arg CH domain binds to actin's subdomain-1 (SD1) and induces a tilt of actin protomers. The I/LWEQ domain binds to either SD1 or SD4, closing the nucleotide binding cleft of actin. Although Arg can use either its CH or ILWEQ domains to bind an actin filament, both domains within Arg cannot bind simultaneously to adjacent protomers in the filament, consistent with its F-actin-bundling activity. The conformational changes in the filament introduced by Arg can explain the cooperative binding of Arg to F-actin and might prevent other actin binding proteins from binding to actin filaments.

Actins↗

Actin-destabilizing factors disrupt filaments by means of a time reversal of polymerization.

Actin, one of the most highly conserved and abundant eukaryotic proteins, is constantly being polymerized and depolymerized within cells as part of cellular motility, tissue formation and repair, and embryonic development. Many proteins exist that bind to monomeric or filamentous (F) forms of actin to regulate the polymerization state. It has become increasingly apparent that the ability of different proteins to bind to and regulate actin filament dynamics depends on the ability of the filament to exist in altered conformations. Yet, little is known about how these conformational changes occur at the molecular level. We have destabilized F-actin filaments by forming a disulfide that locks the "hydrophobic plug" to the body of the actin subunit or by altering the C terminus of actin with a tetramethylrhodamine label. We also examined F-actin filaments at short times after the initiation of polymerization. In all three cases, a substantial fraction of protomers can be found in a "tilted" state that also is induced by actin depolymerizing factor/cofilin proteins. These observations suggest that F-actin filaments are annealed over time into a stable filament and that actin-depolymerizing proteins can effect a time reversal of polymerization.

Actin Cytoskeleton↗

Acrosomal actin: twists and turns of a versatile filament.

A new electron cryomicroscopic reconstruction of an actin-scruin bundle from Limulus sperm reveals details about the enormous structural plasticity within F-actin. The twist and tilt of the actin subunits show very large deviations from ideal F-actin, providing clues about actin dynamics.

Acrosome↗

The stalk region of dynamin drives the constriction of dynamin tubes.

The GTPase dynamin is essential for numerous vesiculation events including clathrin-mediated endocytosis. Upon GTP hydrolysis, dynamin constricts a lipid bilayer. Previously, a three-dimensional structure of mutant dynamin in the constricted state was determined by helical reconstruction methods. We solved the nonconstricted state by a single-particle approach and show that the stalk region of dynamin undergoes a large conformational change that drives tube constriction.

Dynamins↗