PubMed Health⌕ Search

Biomedical subjects

Eiji Nagamori

Publications and source records attributed to Eiji Nagamori.

10 recordsLinked to original sources
PubMed2006

D-lactic acid production by metabolically engineered Saccharomyces cerevisiae.

Poly D-lactic acid is an important polymer because it improves the thermostability of poly L-lactic acid by the stereo complex formation. We constructed a metabolically engineered Saccharomyces cerevisiae that produces D-lactic acid efficiently. In this recombinant, the coding region of pyruvate decarboxylase 1 (PDC1) was completely deleted, and two copies of the D-lactate dehydrogenase (D-LDH) gene from Leuconostoc mesenteroides subsp. mesenteroides strain NBRC3426 were introduced into the genome. The D-lactate production reached 61.5 g/l, the amount of glucose being transformed into D-lactic acid being 61.2% under neutralizing conditions. Additionally, the yield of free D-lactic acid was also shown to be 53.0% under non-neutralizing conditions. It was confirmed that D-lactic acid of extremely high optical purity of 99.9% or higher. Our finding obtained the possibility of a new approach for pure d-lactic acid production without a neutralizing process compared with other techniques involving lactic acid bacteria and transgenic Escherichia coli.

Amino Acid Sequence↗
PubMed2006

The effect of pyruvate decarboxylase gene knockout in Saccharomyces cerevisiae on L-lactic acid production.

A plant- and crop-based renewable plastic, poly-lactic acid (PLA), is receiving attention as a new material for a sustainable society in place of petroleum-based plastics. We constructed a metabolically engineered Saccharomyces cerevisiae that has both pyruvate decarboxylase genes (PDC1 and PDC5) disrupted in the genetic background to express two copies of the bovine L-lactate dehydrogenase (LDH) gene. With this recombinant, the yield of lactate was 82.3 g/liter, up to 81.5% of the glucose being transformed into lactic acid on neutralizing cultivation, although pdc1 pdc5 double disruption led to ineffective decreases in cell growth and fermentation speed. This strain showed lactate productivity improvement as much as 1.5 times higher than the previous strain. This production yield is the highest value for a lactic acid-producing yeast yet reported.

Bioreactors↗
PubMed2006

Metabolic engineering of Saccharomyces cerevisiae for efficient production of pure L-(+)-lactic acid.

We developed a metabolically engineered Saccharomyces cerevisiae, which produces optically pure L-lactic acid efficiently using cane juice-based medium. In this recombinant, the coding region of pyruvate decarboxylase (PDC)1 was completely deleted, and six copies of the bovine L-lactate dehydrogenase (L-LDH) genes were introduced on the genome under the control of the PDC1 promoter. To confirm optically pure lactate production in low-cost medium, cane juice-based medium was used in fermentation with neutralizing conditions. L-lactate production reached 122 g/L, with 61% of sugar being transformed into L-lactate finally. The optical purity of this L-lactate, that affects the physical characteristics of poly-L-lactic acid, was extremely high, 99.9% or over.

Animals↗
PubMed2005

Efficient production of L-Lactic acid by metabolically engineered Saccharomyces cerevisiae with a genome-integrated L-lactate dehydrogenase gene.

We developed a metabolically engineered yeast which produces lactic acid efficiently. In this recombinant strain, the coding region for pyruvate decarboxylase 1 (PDC1) on chromosome XII is substituted for that of the l-lactate dehydrogenase gene (LDH) through homologous recombination. The expression of mRNA for the genome-integrated LDH is regulated under the control of the native PDC1 promoter, while PDC1 is completely disrupted. Using this method, we constructed a diploid yeast transformant, with each haploid genome having a single insertion of bovine LDH. Yeast cells expressing LDH were observed to convert glucose to both lactate (55.6 g/liter) and ethanol (16.9 g/liter), with up to 62.2% of the glucose being transformed into lactic acid under neutralizing conditions. This transgenic strain, which expresses bovine LDH under the control of the PDC1 promoter, also showed high lactic acid production (50.2 g/liter) under nonneutralizing conditions. The differences in lactic acid production were compared among four different recombinants expressing a heterologous LDH gene (i.e., either the bovine LDH gene or the Bifidobacterium longum LDH gene): two transgenic strains with 2microm plasmid-based vectors and two genome-integrated strains.

Animals↗
PubMed2004

Obtaining transgenic plants using the bio-active beads method.

Several methods of transformation are currently available for delivering exogenous DNA into animal and plant cells. In this study, a novel and efficient transformation system for DNA delivery/expression with a capacity to transport DNA of high molecular weight was developed. This system can overcome the shortcomings of traditional transformation methods such as Agrobacterium-mediated transformation, particle bombardment, and the electroporation method. The method developed in this study uses calcium alginate micro beads to immobilize DNA molecules in combination with polyethylene glycol treatment. In addition, it is simple and low-cost, and requires limited equipment. Using this method, we have successfully transformed tobacco plants, screening by kanamycin resistance. The transformed genes in the transformants were confirmed by PCR and Southern hybridization.

Alginates↗
PubMed2004

A novel transfection method for mammalian cells using calcium alginate microbeads.

The direct transfer of genetic materials into mammalian cells is an indispensable technique. We have developed calcium alginate (CA) microbeads which can deliver plasmid DNAs and yeast artificial chromosomes into plant and yeast cells. In this paper, we demonstrate the effective transfection of mammalian cells by CA microbeads immobilizing plasmid DNAs. The transfection was performed using the pEGFP-C1 plasmid containing the cytomegalovirus (CMV) promoter and enhanced green fluorescent protein (EGFP) gene. The transient expression of EGFP was observed 24 h after transfection. The expression efficiency was maximum when the concentration of sodium alginate was 1% and the amount of plasmid DNA was increased to 100 microg. The expression efficiency of our method using CA microbeads is 2-10 times higher than that of the polyethylene glycol (PEG) method. Our results suggest that the CA microbead mediated transfection of mammalian cells effectively delivers genetic materials into mammalian suspension cells.

Journal Article↗
PubMed2003

Transformation of yeast using calcium alginate microbeads with surface-immobilized chromosomal DNA.

Yeast artificial chromosomes (YACs) are useful cloning vectors that have the capacity to carry large DNA inserts. The largest barrier to using such large DNA molecules in transformation experiments has been their physical instability in solution. We developed a new method of transforming yeast using chromosome-sized DNA. The method uses calcium alginate microbeads to immobilize high-density yeast chromosomal DNA. Chromosomal DNA immobilized on microbeads is physically stabilized compared with naked chromosomal DNA. The microbead-mediated transformation performed well, not only with respect to the transformation frequency with large DNA molecules (> 100 kb) but also in successful transformation using split chromosome DNA that exceeded 450 kb.

Adsorption↗
PubMed2002

Enhanced anthocyanin production from grape callus in an air-lift type bioreactor using a viscous additive-supplemented medium.

An N-medium containing carboxymethyl cellulose (CMC) was applied to an air-lift type bioreactor culture of grape (Vitis vinifera cv. Bailey alicant A.) callus, and anthocyanin production was investigated. Grape callus grew well at an air flow rate of 80 ml/min and anthocyanin production was significantly increased in the N-medium, reaching 17 mg/l after 7 d of culture. The anthocyanin content of the N-medium was about two times higher than that of the conventional medium without CMC. The effect of air flow rate was also investigated within the range from 40 to 160 ml/min. A twofold increase in anthocyanin content was obtained at all the air flow rates tested in the N-medium. The distribution of grape callus size obtained after 7 d of the bioreactor culture was investigated. The average callus size was 490 mum which was 1.6 times larger than that obtained in the conventional medium. It was found that large calli with a relatively high anthocyanin pigment content were formed in the bioreactor culture using the N-medium. The fluid dynamics in the bioreactor was also investigated at three points (top, middle and bottom) in the bioreactor by laser doppler velocimetry. The average axial velocity of the circulated medium was 0.4 times lower than that of the conventional medium while their average radial velocities were almost the same (zero). The standard deviation of radial velocity fluctuation in the N-medium was also 0.4 times less than that in the conventional medium. These results suggest that turbulent flow occurred in the bioreactor culture using the conventional medium and the degree of turbulent flow decreased significantly when 0.8% CMC was added to the medium to prepare the N-medium. A change of the flow pattern is considered to be the cause of the decrease in hydrodynamic stress, resulting in enhanced pigment production due to the enlargement of the callus.

Journal Article↗
PubMed2002

A novel gene delivery system in plants with calcium alginate micro-beads.

We have produced micrometer-sized calcium alginate beads referred to as "bio-beads" that encapsulate plasmid DNA molecules carrying a reporter gene. In order to evaluate the efficiency of the bio-beads in mediating genetic transfection, protoplasts isolated from cultured tobacco cells (BY-2) were transfected with bio-beads containing a plasmid that carries the modified green fluorescent protein gene CaMV35S-sGFP. With the bio-beads treatment, approximately ten-fold higher GFP expression was observed after 24 h incubation compared to that with the conventional method using a naked plasmid solution. Transfection was up to 0.22% efficient. These results indicate that bio-beads have a possibility for efficient transformation in plants.

Journal Article↗