Biomedical subjects

Elias N Glytsis

Publications and source records attributed to Elias N Glytsis.

11 recordsLinked to original sources

PubMed2006

Optimization of sawtooth surface-relief gratings: effects of substrate refractive index and polarization.

The effect of the refractive index of the substrate together with the incident polarization on the optimization of sawtooth surface-relief gratings (SRGs) is investigated. The global optimum diffraction efficiencies of the -1st forward-diffracted order of sawtooth SRGs are 63.3% occurring at n2=1.47 for TE polarization and 73.8% occurring at n2=2.88 for TM polarization. Incident TE polarization has higher optimum diffraction efficiency than TM polarization for all n2<1.85. In contrast, TM polarization has higher optimum diffraction efficiency than TE polarization for all n2>1.85. A polymer (n2=1.5) optimum sawtooth SRG exhibits 62.6% efficiency for TE polarization. A silicon (n2=3.475) optimum sawtooth SRG exhibits 68.6% efficiency for TM polarization. These sawtooth SRGs are compared to right-angle-face trapezoidal SRGs. It is found that the optimum profiles of right-angle-face trapezoidal SRGs have only very slightly increased efficiencies over sawtooth SRGs (0.04% for TE and 0.55% for TM).

Journal Article↗

PubMed2006

Optimization of anisotropically etched silicon surface-relief gratings for substrate-mode optical interconnects.

The optimum profiles of right-angle-face anisotropically etched silicon surface-relief gratings illuminated at normal incidence for substrate-mode optical interconnects are determined for TE, TM, and random linear (RL) polarizations. A simulated annealing algorithm in conjunction with the rigorous coupled-wave analysis is used. The optimum diffraction efficiencies of the -1 forward-diffracted order are 37.3%, 67.1%, and 51.2% for TE-, TM-, and RL-polarization-optimized profiles, respectively. Also, the sensitivities to grating thickness, slant angle, and incident angle of the optimized profiles are presented.

Journal Article↗

PubMed2005

Optimization of finite-length input volume holographic grating couplers illuminated by finite-width incident beams.

A finite volume holographic grating coupler (VHGC) normally illuminated with various incident-beam profiles (such as a Gaussian beam, a flat cosine-squared beam, and an exponential-decay beam) with finite beam widths for input coupling is rigorously analyzed by use of the finite-difference frequency-domain method. The effects of the incident-beam width, the incident-beam position, the incident-beam profile, and the incident-beam angle of incidence on the input coupling efficiency are investigated. The optimum conditions for input coupling are determined. Both a VHGC embedded in the waveguide film region and a VHGC placed in the waveguide cover region are investigated. For a given finite VHGC, the input coupling efficiencies are strongly dependent on incident-beam widths, incident-beam positions, and incident-beam angles of incidence, but are only weakly dependent on incident-beam profiles.

Journal Article↗

PubMed2005

Angular sensitivities of volume gratings for substrate-mode optical interconnects.

The angular sensitivities of slanted volume gratings (VGs) illuminated by three-dimensional (3-D) converging-diverging spherical Gaussian beams for substrate-mode optical interconnects in microelectronics are analyzed by application of 3-D finite-beam rigorous coupled-wave analysis. Angular misalignments about the z, y, and x axes that correspond to yaw, pitch, and roll misalignments resulting from manufacturing tolerances of chips are investigated. Two cases of linear polarization of the central beam of the Gaussian are considered: E perpendicular K and H perpendicular K, where K is the grating vector. From worst-case manufacturing tolerances, the ranges of yaw, pitch, and roll misalignment angles are alpha = +/-1.17 degrees, beta= +/-3.04 degrees, and gamma = +/-3.04 degrees, respectively. Based on these ranges of misalignment angles, the decreases of diffraction efficiencies for slanted VGs that are due to both the yaw and the roll misalignments are relatively small. However, the efficiency of substrate-mode optical interconnects achieved by slanted VGs could be reduced by 61.04% for E perpendicular K polarization and by 58.63% for H perpendicular K polarization because of the pitch misalignment. Thus the performance of a VG optical interconnect is most sensitive to pitch misalignment.

Journal Article↗

PubMed2005

Three-dimensional converging-diverging Gaussian beam diffraction by a volume grating.

The diffraction characteristics of a volume grating (VG) illuminated by a three-dimensional (3-D) converging-diverging Gaussian beam at conical incidence are investigated by applying 3-D finite-beam (FB) rigorous coupled-wave analysis (RCWA) based on the conventional 3-D RCWA in conjunction with two-dimensional plane-wave decomposition. The Gaussian beam is assumed to have an arbitrary incidence angle, an arbitrary azimuthal angle, and any linear polarization. The two cases with linear polarizations of the central beam of the Gaussian (E perpendicular K and H perpendicular K) are investigated. The diffraction efficiencies and the diffracted beam profiles for both unslanted VGs and slanted VGs (designed for substrate-mode optical interconnects) are presented. In general, the diffraction efficiencies of a converging-diverging spherical Gaussian beam diffracted by both unslanted VGs and slanted VGs increase and approach the central-beam results as the refractive-index modulation increases.

Journal Article↗

PubMed2004

Wavelength response of waveguide volume grating couplers for optical interconnects.

The wavelength response of a waveguide volume grating coupler (WVGC) is analyzed for coupling light from a slab waveguide into the superstrate. A leaky-mode approach is used in conjunction with rigorous coupled-wave analysis. A quantitative theoretical study of the effect of index modulation, waveguide index, and grating thickness on the wavelength bandpass of a WVGC is also presented. The FWHM wavelength bandpasses found for high-efficiency couplers range from 173 to 525 nm. The various Bragg conditions that can be used in designing a WVGC are also presented and compared. The use of the propagation constant of the mode being outcoupled as the incident wave vector in the Bragg condition is shown to produce the highest coupling efficiency.

Journal Article↗

PubMed2004

Volume holographic grating couplers: rigorous analysis by use of the finite-difference frequency-domain method.

Two configurations of volume holographic grating couplers are rigorously analyzed by means of the finite-difference frequency-domain method (FDFD) for both TE and TM polarizations and for 0- and 45-deg output coupling. The two configurations depend on the position of the grating coupler, which can be placed either in the film or in the cover waveguide region. The FDFD results are compared with those obtained by the rigorous coupled-wave analysis in conjunction with the leaky-mode approach (RCWA-LM). Because the FDFD method is a rigorous solution of the Maxwell equations, it simulates the VHGC configuration and takes into account the waveguide-coupler discontinuity effects as well as the multimode excitation and interference effects, all of which are neglected by the traditional RCWA-LM.

Journal Article↗

PubMed2002

Volume grating couplers: polarization and loss effects.

We analyze the polarization-dependent performance and the loss performance of volume grating couplers using a leaky-mode approach in conjunction with rigorous coupled-wave analysis for two configurations: the volume grating in the cover layer and the volume grating in the waveguide. The angular dependence of TE and TM polarization coupling efficiency is studied, and designs for polarization-dependent and polarization-independent couplers are presented for both configurations. Polarization-dependent couplers are obtained with an outcoupling angle close to normal. Polarization-independent couplers are obtained with outcoupling angles away from normal, 46.7 deg in the case of a volume grating in the cover layer and 54.4 deg in the case of a volume grating in the waveguide. The effect of loss on coupler performance is also analyzed. It is found that, for cases of practical importance, the effect of lossy coupler materials is small. The estimated loss for a commercially available material is 5 dB/cm. For TE-polarized light and the volume grating in the waveguide, a loss of this magnitude reduces the coupling efficiency by less than 3%, whereas in the case of the volume grating in the cover layer, it reduces the coupling efficiency by less than 0.3%.

Journal Article↗

PubMed2002

Colorimetry-based retardation measurement method with white-light interference.

A colorimetry-based retardation measurement (CBRM) method is presented. The specimen, between crossed polarizers, is illuminated with a white-light source. The retardation that is due to the birefringence of the specimen produces a white-light interference color. The x, y chromaticity coordinates of the color produced are measured with a spectrophotometer. The resulting x, y values are compared with a retardation x, y database that we obtained by measuring the retardation with an accurate Senarmont compensator and the x, y chromaticity values along the length of a 0-4-order quartz wedge. The technique was validated by the measurement of a variety of retardation plates. The retardation accuracy (mean error) of the CBRM method is shown to be 3.6 nm. The resolution is +/-0.2 nm, and the measurement range is 5-2150 nm. The method substitutes for a polariscope and eliminates errors associated with quarter-wave plates. The CBRM method does not utilize any moving parts and thus is fast and can be automated.

Journal Article↗

PubMed2002

Two-dimensionally-periodic diffractive optical elements: limitations of scalar analysis.

The range of validity of the scalar diffraction analysis is quantified for the case of two-dimensionally-periodic diffractive optical elements (crossed gratings). Three canonical classes of two-dimensionally-periodic grating structures are analyzed by using the rigorous coupled-wave analysis as well as the scalar diffraction analysis. In all cases the scalar-analysis diffraction efficiencies are compared with the exact diffraction efficiencies. The error in using the scalar analysis is then determined as a function of the grating-period(s)-to-wavelength ratio(s), the minimum feature size, the grating depth, the refractive index of the grating, the incident polarization, and the number of phase levels. The three classes of two-dimensional (2-D) unit cells are as follows: (1) a rectangular pillar, (2) an elliptical pillar, and (3) an arbitrarily pixellated multilevel 2-D unit cell that is representative of more complicated diffractive optical elements such as computer-generated holograms. In all cases a normally incident electromagnetic plane wave is considered. It is shown that the error of the scalar diffraction analysis in the case of two-dimensionally-periodic diffractive optical elements is greater than that for the corresponding one-dimensionally-periodic counterparts. In addition, the accuracy of the scalar diffraction analysis degrades with increasing refractive index, grating thickness, and asymmetry of the 2-D unit cell and with decreasing grating-period-to-wavelength ratio and feature size.

Journal Article↗

PubMed2002

Finite-number-of-periods holographic gratings with finite-width incident beams: analysis using the finite-difference frequency-domain method.

The effects of finite number of periods (FNP) and finite incident beams on the diffraction efficiencies of holographic gratings are investigated by the finite-difference frequency-domain (FDFD) method. Gratings comprising 20, 15, 10, 5, and 3 periods illuminated by TE and TM incident light with various beam sizes are analyzed with the FDFD method and compared with the rigorous coupled-wave analysis (RCWA). Both unslanted and slanted gratings are treated in transmission as well as in reflection configurations. In general, the effect of the FNP is a decrease in the diffraction efficiency with a decrease in the number of periods of the grating. Similarly, a decrease in incident-beam width causes a decrease in the diffraction efficiency. Exceptions appear in off-Bragg incidence in which a smaller beam width could result in higher diffraction efficiency. For beam widths greater than 10 grating periods and for gratings with more than 20 periods in width, the diffraction efficiencies slowly converge to the values predicted by the RCWA (infinite incident beam and infinite-number-of-periods grating) for both TE and TM polarizations. Furthermore, the effects of FNP holographic gratings on their diffraction performance are found to be comparable to their counterparts of FNP surface-relief gratings.

Journal Article↗