PubMed Health⌕ Search

Biomedical subjects

Emilia Bramanti

Publications and source records attributed to Emilia Bramanti.

16 recordsLinked to original sources

Longitudinal In Vivo Imaging at Single-Lesion Resolution Identifies Allele-Associated Response and Resistance Dynamics in EGFR-Mutant Lung Cancer.

Acquired resistance to targeted therapies is inevitable in EGFR-mutant non-small cell lung cancer (NSCLC), yet the principles governing its emergence in vivo remain incompletely understood. In particular, how lesion-level response patterns vary across distinct EGFR allele contexts during therapy has not been systematically examined at single-lesion resolution. Here, we establish a longitudinal in vivo imaging platform enabling single-lesion resolution tracking of tumor behavior during therapy in genetically engineered mouse models representing clinically relevant EGFR alleles. Using high-resolution micro-computed tomography (micro-CT) and three-dimensional reconstruction, we monitor tumor growth, therapeutic response, and resistance during osimertinib treatment. EGFR genotype is associated with distinct patterns of tumor growth, response kinetics, and resistance timing. Therapeutic response is spatially heterogeneous, with coexisting lesions undergoing complete regression, persistence, or progression within the same lung. During treatment, spatially distinct lesion-level behaviors included persistent growth during therapy and initial regression followed by regrowth. These findings demonstrate the utility of longitudinal micro-CT imaging to investigate allele-associated differences in treatment response and resistance timing at single-lesion resolution in vivo.

Animals↗

Determination and characterization of phytochelatins by liquid chromatography coupled with on line chemical vapour generation and atomic fluorescence spectrometric detection.

Liquid chromatography (LC) coupled on line with UV/visible diode array detector (DAD) and cold vapour generation atomic fluorescence spectrometry (CVGAFS) has been developed for the speciation, determination and characterization of phytochelatins (PCs). The method is based on a bidimensional approach, e.g. on the analysis of synthetic PC solutions (apo-PCs and Cd(2+)-complexed PCs) (i) by size exclusion chromatography coupled to UV diode array detector (SEC-DAD); (ii) by the derivatization of PC -SH groups in SEC fractions by p-hydroxymercurybenzoate (PHMB) and the indirect detection of PC-PHMB complexes by reversed phase liquid chromatography coupled to atomic fluorescence detector (RPLC-CVGAFS). MALDI-TOF/MS (matrix assisted laser desorption ionization time of flight mass spectrometry) analysis of underivatized synthetic PC samples was performed in order have a qualitative information of their composition. Quantitative analysis of synthetic PC solutions has been performed on the basis of peak area of PC-PHMB complexes of the mercury specific chromatogram and calibration curve of standard solution of glutathione (GSH) complexed to PHMB (GS-PHMB). The limit of quantitation (LOQ) in terms of GS-PHMB complex was 90 nM (CV 5%) with an injection volume of 35 microL, corresponding to 3.2 pmol (0.97 ng) of GSH. The method has been applied to analysis of extracts of cell cultures from Phaeodactylum tricornutum grown in Cd-containing nutrient solutions, analysed by SEC-DAD-CVGAFS and RPLC-DAD-CVGAFS.

Chromatography, Liquid↗

Flow injection analysis with diode array absorbance detection and dynamic surface tension detection for studying denaturation and surface activity of globular proteins.

In this article, a multidimensional dynamic surface tension detector (DSTD), in a parallel configuration with a UV-visible diode array absorbance detector, is presented in a novel flow injection analysis (FIA) application to study the effects of chemical denaturants urea, guanidinium hydrochloride (GdmHCl), and guanidinium thyocyanate (GdmSCN) on the surface activity of globular proteins at the liquid-air interface. The DSTD signal is obtained by measuring the changing pressure across the liquid-air interface of 4-mul drops repeatedly forming at the end of a capillary using FIA. The sensitivity and selectivity of the DSTD signal is related to the surface-active protein concentration in aqueous solution combined with the thermodynamics and kinetics of protein interaction at a liquid-air drop interface. Rapid on-line calibration and measurement of dynamic surface tension is applied, with the surface tension converted into surface pressure results. Continuous surface tension measurement throughout the entire drop growth is achieved, providing insight into kinetic behavior of protein interactive processes at the liquid-air drop interface. Specifically, chemical denaturation of 12 commercial globular proteins-chicken egg albumin, bovine serum albumin, human serum albumin, alpha-lactalbumin (alpha-Lac), myoglobin, cytochrome c, hemoglobin, carbonic anhydrase, alpha-chymotrypsinogen A, beta-lactoglobulin (beta-LG), lysozyme, and glyceraldehyde-3-phosphate-dehydrogenase-is studied in terms of surface pressure (i.e., surface activity) after treatment with increasing concentrations of urea, GdmHCl, and GdmSCN in the 0-8, 0-6, and 0-5 M ranges, respectively. For several of these proteins, the spectroscopic absorbance changes are monitored simultaneously to provide additional information prior to drop formation. Results show that surface pressure of proteins generally increases as the denaturant concentration increases and that effectiveness is GdmSCN > GdmHCl > urea. Protein unfolding curves obtained by plotting surface pressure as a function of denaturant concentration are presented and compared with respect to unfolding curves obtained by using UV absorbance and literature data. Kinetic information relative to the protein adsorption to the air-liquid interface of two proteins, alpha-Lac and beta-LG (chosen as representative proteins for comparison), denatured by the three denaturants is also studied and discussed.

Animals↗

Speciation and quantification of thiols by reversed-phase chromatography coupled with on-line chemical vapor generation and atomic fluorescence spectrometric detection: method validation and preliminary application for glutathione measurements in human whole blood.

BACKGROUND: We developed a sensitive, specific method for the low-molecular-mass thiols cysteine, cysteinylglycine, glutathione, and homocysteine and validated the method for measurement of glutathione in blood. METHODS: The technique was based on reversed-phase chromatography (RPC) coupled on line with cold vapor generation atomic fluorescence spectrometry (CVGAFS). Thiols were derivatized before introduction on the column by use of a p-hydroxymercuribenzoate (PHMB) mercurial probe and separated as thiol-PHMB complexes on a Vydac C4 column. Postcolumn on-line reaction of derivatized thiols with bromine allowed rapid conversion of the thiol-PHMB complexes to inorganic mercury with recovery of 100 (2)% of the sample. HgII was selectively detected by atomic fluorescence spectrometry in an Ar/H2 miniaturized flame after sodium borohydride reduction to Hg0. RESULTS: The relationship between thiol-PHMB complex concentration and peak area (CVGAFS signal) was linear over the concentration range 0.01-1400 micromol/L (injected). The detection limits were 1, 1, 0.6, and 0.8 nmol/L for cysteine, cysteinylglycine, homocysteine, and glutathione in the injected sample, respectively. The CVs for thiols were 1.5%-2.2% for calibrator solutions and 2.1% and 3.0% for real samples. The RPC-CVGAFS method allowed speciation of glutathione (reduced and oxidized) in human whole blood from healthy donors and from the coronary sinus of patients with idiopathic dilated cardiomyopathy during and after chronotropic stress. CONCLUSION: The RPC-CVGAFS method could be used to measure reduced and oxidized glutathione in human whole blood as disease biomarkers.

Autoanalysis↗

Effects of sucrose on the internal dynamics of azurin.

Sucrose is a natural osmolyte accumulated in cells of organisms as they adapt to environmental stresses. In vitro, sucrose increases protein stability and forces partially unfolded structures to refold. Its effects on the native fold structure and dynamics are not fully established. This study, utilizing Trp phosphorescence spectroscopy, examined the influence of molar concentrations of sucrose on the flexibility of metal-free azurin from Pseudomonas aeruginosa. In addition, by means of specific mutants of the test protein, namely I7S, F110S, and C3A/C26A, that altered its thermodynamic stability, its intrinsic flexibility, and the extent of internal hydration, this investigation sought to identify possible correlations between these features of protein structure and the influence of the osmolyte on protein dynamics. Alterations of structural fluctuations were assessed by both the intrinsic phosphorescence lifetime (tau), which reports on local structure about the triplet probe, and the acrylamide bimolecular quenching rate constant (k(q)) that is a measure of the average acrylamide diffusion coefficient through the macromolecule. From the modulation of tau and k(q) across a wide temperature range and up to a concentration of 2M sucrose, it is concluded that sucrose attenuates structural fluctuations principally when macromolecules are internally hydrated and thermally expanded. Preliminary tests with trehalose and xylitol suggest that the effects of sucrose are general of the polyol class of osmolytes.

Acrylamide↗

Solid state (13)C NMR and FT-IR spectroscopy of the cocoon silk of two common spiders.

The structure of the silk from cocoons of two common spiders, Araneus diadematus (family Araneidae) and Achaearanea tepidariorum (family Theridiidae) was investigated by means of (13)C solid state NMR and FT-IR spectroscopies. The combined use of these two techniques allowed us to highlight differences in the two samples. The cocoon silk of Achaearanea tepidariorum is essentially constituted by helical and beta-sheet structures, whereas that of Araneus diadematus shows a more complex structure, containing also beta-strands and beta-turns. Moreover, the former silk is essentially crystalline while the latter contains more mobile domains. The structural differences of the two cocoon silks are ascribed to the different habitat of the two species.

Animals↗

High-throughput screening of protein surface activity via flow injection analysis-pH gradient-dynamic surface tension detection.

Using flow injection analysis (FIA), a pH gradient is blended in real time with a protein sample as the pH-dependent protein surface activity is measured by a dynamic surface tension detector (FIA-pH-DSTD). This instrumental system was developed as a high-throughput method for the screening of protein surface activity at the air/liquid interface as a function of pH. This method utilizes the continuous flow, drop-based dynamic surface tension detector in combination with flow injection sample introduction and blending of a steady-state concentration of protein sample with a pH gradient ranging from pH 2.0 to pH 11.5. Dynamic surface tension is measured through the differential pressure across the air/liquid interface of repeatedly growing and detaching drops. Continuous surface tension measurement is achieved for each eluting drop of 2-s length (2 muL), providing insight into both the kinetic and thermodynamic behaviors of molecular orientation processes at the liquid/air interface. Three-dimensional data are obtained, with surface tension first converted to surface pressure, which is collected as a function of elution time versus drop time. In FIA-pH-DSTD, a commercial pH probe is used to measure pH during elution time, enabling surface pressure throughout drop time to be subsequently plotted as a function of eluting pH. An automated DSTD calibration procedure and data analysis method is applied, which allows simultaneous use of two different solvents, permitting real-time dynamic surface tension data to be obtained. The method was applied to the analysis of 14 commercial purified proteins, yielding characteristic features of surface activity as a function of pH. The reproducibility of the measurement and selectivity advantage of the DSTD was shown for the analysis of serum albumins from various mammalian sources. Several applications were also suggested and discussed in order to show the potential of the method for protein and food chemistry studies and in the study of protein-polymer interactions.

Journal Article↗

Characterization of denatured metallothioneins by reversed phase coupled with on-line chemical vapour generation and atomic fluorescence spectrometric detection.

A new analytical hyphenated technique is proposed for determination and characterization of thiolic proteins, based on reverse phase chromatography (RPC) coupled on-line with cold vapour generation atomic fluorescence spectrometry (CVGAFS). Proteins are pre-column simultaneously denatured and derivatized in phosphate buffer solution containing 8.0 mol l(-1) urea and p-hydroxymercurybenzoate (PHMB). The derivatized proteins are separated on a C4 Vydac Reverse Phase column. Post-column on-line reaction of derivatized denatured proteins with bromine, generated in situ by KBr/KBrO3 in HCl medium, allowed the fast conversion of both the uncomplexed PHMB and of the PHMB bound to proteins to inorganic mercury, also in the presence of methanol in the RPC eluent phase. Hg(II) is selectively detected by AFS in a Ar/H2 miniaturized flame after sodium borohydride reduction to Hg degrees. Under optimized conditions, on-line bromine treatment gives a 98+/-2% recovery of both free and protein-complexed PHMB. The effect of methanol on the sensitivity of Hg(II) detection was studied and controlled. RPC-CVGAFS system has been applied to the analysis of metallothioneins from rabbit liver (MT(RL)) standard solutions, and their commercial isoforms MT-1 and MT-2. The analysis of denatured, PHMB-complexed MTs allowed the determination of the number of thiolic groups complexed by PHMB. It was found that MTs from rabbit liver have 10.0+/-0.3 (MT-1) and 6.7+/-0.3 (MT-2 and MT(RL)) -SH groups complexed by PHMB. The detection limit (LODc) for PHMB in 95% methanol in the optimized conditions was about 9.3 x 10(-9) mol l(-1) and for the denatured MTs LODc was about 8.6 x 10(-10) mol l(-1), taking into account an approximate complexating ratio PHMB:MTs of 7:1.

Chromatography, Liquid↗

Study of the disulfide reduction of denatured proteins by liquid chromatography coupled with on-line cold-vapor-generation atomic-fluorescence spectrometry (LC-CVGAFS).

Hydrophobic-interaction chromatography coupled on-line with chemical-vapor-generation atomic-fluorescence spectrometry (HIC-CVGAFS), optimized recently for the analysis of thiol-containing proteins under denaturing conditions, has been used to study the chemical reduction of denatured proteins. Four proteins chosen as models (human serum albumin (HSA), bovine serum albumin (BSA), alpha-lactalbumin (alpha-Lac) from bovine milk, and lysozyme from chicken egg (Lys)) were denatured with urea and reduced with dithiothreitol (DTT), with selenol as catalyst. The method is based on derivatization of the -SH groups of proteins with p-hydroxymercurybenzoate (PHMB), followed by HIC separation and post-column on-line reaction of the derivatized reduced, denatured proteins with bromine generated in situ. HgII, derived from rapid conversion of uncomplexed and protein-complexed PHMB, is selectively detected by AFS in an Ar/H2 miniaturized flame after sodium borohydride (NaBH4) reduction to Hg degrees . The yield of the reduction was studied as a function of reductant concentration, reduction time (tred), and urea concentration. Results showed that the optimum values for DTT and selenol concentrations and for tred were between 1 and 100 mmol L(-1) and between 1 and 20 min, respectively, depending on the protein studied. The percentage disulfide bond reduction increases as the urea concentration used for protein denaturation increases, giving a single-step sigmoid increment for single-domain, low-MW proteins (alpha-Lac and Lys), and a two-step sigmoid increment for multi-domain, high MW proteins (HSA and BSA). The shapes of plots of percentage reduced disulfide against urea concentration are characteristic of each protein and are correlated with the location of S-S in the protein. Under the adopted conditions complete protein denaturation is the conditio sine qua non for obtaining 100% S-S reduction. The detection limit for denatured, reduced proteins examined under the optimized conditions was found to be in the range 1-5 x 10(-12) mol L(-1) (10-30 pg), depending on the protein considered.

Animals↗

Multidimensional analysis of denatured milk proteins by hydrophobic interaction chromatography coupled to a dynamic surface tension detector.

Multidimensional analysis of denatured milk proteins is reported using high-performance liquid chromatography (HPLC) combined with dynamic surface tension detection (DSTD). A hydrophobic interaction chromatography (HIC) column (a TSK-Gel Phenyl-5PW column, TosoBiosep), in the presence of 3.0 M guanidine hydrochloride (GdmHCl) as denaturing agent is employed as the mobile phase. Dynamic surface tension is measured through the differential pressure across the liquid-air interface of repeatedly growing and detaching drops. Continuous surface tension measurement throughout the entire drop growth (50 ms to 4 s) is achieved, for each eluting drop of 4 s length, providing insight into both the kinetic and thermodynamic behavior of molecular orientation processes at the liquid-air interface. An automated calibration procedure and data analysis method is applied with the DSTD system, which allows two unique solvents to be used, the HIC mobile phase for the sample and a second solvent (water for example) for the standard, permitting real-time dynamic surface tension data to be obtained. Three-dimensional data is obtained, with surface tension as a function of drop time first converted to surface pressure, which is plotted as a function of the chromatographic elution time axis. Experiments were initially performed using flow injection analysis (FIA) with the DSTD system for investigating commercial single standard milk proteins (alpha-lactalbumin, beta-lactoglobulin, alpha-, beta-, kappa-casein and a casein mixture) denatured by GdmHCl. These FIA-DSTD experiments allowed the separation and detection conditions to be optimized for the HIC-DSTD experiments. Thus, the HIC-DSTD system has been optimized and successfully applied to the selective analysis of surface-active casein fractions (alpha s1- and beta-casein) in a commercial casein mixture, raw milk samples (cow's, ewe's and goat's milk) and other diary products (yogurt, stracchino, mozzarella, parmesan cheese and chocolate cream). The different samples were readily distinguished based upon the selectivity provided by the HIC-DSTD method. The selectivity advantage of using DSTD relative to absorbance detection is also demonstrated.

Calibration↗

Quantitation of reduced glutathione and cysteine in human immunodeficiency virus-infected patients.

Plasma viral load (VL) values and CD4(+) cell count are employed clinically for initiation of therapy in the treatment of patients infected with human immunodeficiency virus (HIV), as previous clinical studies have shown a marked prevalence of acquired immunodeficiency syndrome (AIDS) development in seropositive individuals with VL values over 30 000 copies/mL. Many studies have shown that reduced glutathione (GSH) and cysteine (Cys) deficiency play an important role in the infection. We have developed capillary zone electrophoresis (CZE)-based assays and have used them to investigate the relationship between plasma and intracellular thiol levels and HIV-1 viremia in plasma. Blood samples from healthy volunteers and seropositive patients undergoing different antiretroviral regimes were analyzed in the study. The VL assay was based on CZE-UV detection of viral RNA at 260 nm. Determination of endogenous reduced Cys and GSH was achieved by CZE-UV detection of their mercurial complexes at 200 nm. We found that a decrease in GSH and Cys levels may be associated with disease progress. In fact, reduced GSH and Cys levels appear progressively reduced with increasing VL.

CD4 Lymphocyte Count↗

S-Adenosyl methionine/S-adenosyl-L-homocysteine ratio determination by capillary electrophoresis employed as a monitoring tool for the antiviral effectiveness of adenosine analogs.

S-Adenosyl-L-homocysteine hydrolase (SAHh) inhibitors have long been used as broad-range antivirals and have been recently evaluated as an experimental therapy of filovirus infections. In response to the need for a rapid laboratory testing method that could assess antiviral potency in vivo, our group developed a capillary electrophoresis (CE) method for the determination of the S-adenosyl-L-homocysteine (SAH) to S-adenosyl-L-methionine (SAM) ratio. After chloroacetaldehyde derivatization, SAH and SAM were detected using laser-induced fluorescence detection with a HeCd laser. Separation and quantitation of both SAH and SAM in human plasma were achieved in less than 1 min. The proposed method is rapid and reliable, and could be easily applied to routine monitoring of clinical and preclinical trials subjects.

Acetaldehyde↗

Determination, by dynamic surface-tension analysis, of the molar mass of proteins denatured in guanidine thiocyanate.

A drop-based dynamic surface-tension detector (DSTD) has been used to study the dynamic surface tension behavior of proteins denatured in guanidine thiocyanate (GndSCN). The dynamic surface tension at the air-liquid interface is obtained by measuring the internal pressure of drops that grow and detach at a specified rate. In the method the sample of interest is injected and subsequently flows to the DSTD-sensing capillary tip. For this work, a novel DSTD calibration procedure utilizing two distinct mobile phases is applied. Here, the mobile phases are aqueous with different constituents, for example GndSCN and phosphate buffer, either added or omitted. The dual-mobile phase calibration procedure gives the analyst the capability of making protein measurements in a GndSCN-phosphate buffer mobile phase, while measuring a calibration standard in another mobile phase, such as water, in which the surface tension of the calibration standard is readily available. Results are presented with drop volumes of either 2 microL (i.e. 2-s drops) or 7 microL (i.e. 7-s drops) for proteins varying in molar mass from 12,000 to 330,000 g mol(-1). We demonstrate that the DSTD can be used to determine the molar mass of proteins denatured in GndSCN. The method applies a regime where the denatured protein is detected by surface-active properties, and selectivity with regard to molar mass is contained in the dynamic component of the DSTD signal. The dynamic surface pressure signals of the denatured proteins suggest that diffusion plays a large role in the kinetics of the surface activity. The limit of detection for the denatured proteins studied ranged from 3 mg L(-1) to 14 mg L(-1). The DSTD, coupled with the novel dual-mobile phase calibration procedure, can be used to investigate the fundamental properties of proteins. Insight into the behavior at the air-liquid interface for native and denatured proteins is achieved; this is a novel tool for studying protein denaturation, complementary to other common approaches such as spectroscopy and calorimetry. Furthermore, the reported method could be widely applied to the study of effects on the interfacial properties of proteins after a variety of chemical and physical modifications that are possible with the dual-mobile phase calibration procedure.

Calibration↗

Separation and determination of denatured alpha(s1)-, alpha(s2)-, beta- and kappa-caseins by hydrophobic interaction chromatography in cows', ewes' and goats' milk, milk mixtures and cheeses.

Caseins alpha(s1)-, alpha(s2)-, beta- and kappa- from raw cows', ewes' and goats' milk were separated and determined by hydrophobic interaction chromatography (HIC) by using a Propyl column (Eichrom) in the presence of 8.0 M urea in the mobile phase. The method is based on fast and easy solubilization of real raw samples by 4.0 M guanidine thiocyanate followed by the HIC analysis, without any preliminary precipitation or separation of the casein fraction. Elution conditions have been optimized by analyzing commercial single bovine standard caseins and their mixture. In the optimized chromatographic conditions the four casein fractions were separated in less than 45 min. A linear relationship between the concentration of casein and peak area (UV absorbance detector at 280 nm) has been obtained over the concentration range of 0.5 to 40 microM. The detection limit for alpha-, beta- and kappa-caseins ranged between 0.35 and 0.70 microM. The precision of the method was evaluated, the coefficient of variation for alpha-, beta- and kappa-casein determination ranging between 3.0 and 6.0%. The method has been validated by the analysis of reference skim milk powder (BCR-063R) certificated for total nitrogen content. The method was applied to commercial casein mixture and to the qualitative and quantitative analysis of casein fractions in unprocessed, raw cows', goats' and ewes' milk (10 samples analyzed for each species), in one sample of unprocessed buffalos' milk and in commercial cheeses (mozzarella, robiola, ricotta and stracchino). Binary mixtures of milk (cow/goat and cow/ewe) were also analyzed and the ratio between casein peak areas (alpha(s1)/kappa, alpha(s2)/beta, beta/kappa and alpha(s2)/alpha(s1)) of the HIC chromatograms was proposed and discussed in order to evaluate a possible application of this method to detect milk adulteration.

Animals↗

Characterization of denatured proteins by hydrophobic interaction chromatography: a preliminary study.

In this preliminary study hydrophobic interaction chromatography (HIC) is proposed as a good tool in order to detect conformational changes induced by chemical denaturants in two globular proteins, cytochrome C (Cyt C) and myoglobin (MYO). Alterations in protein structure were manifested chromatographically by reproducible changes in peak heights, retention time, and appearance of multiple peaks. The HIC behavior of the two model proteins denatured by guanidinium thyocyanate (GdmSCN) was investigated, keeping constant various concentrations of urea in the mobile phase in a TSK-Gel Phenyl-5PW column (TosoBiosep). Suitable elution conditions provide evidence of the simultaneous presence of two denatured forms in the case of MYO, and sequential different denatured states of Cyt C.

Animals↗

New chromatographic method for separation and determination of denatured alphaS1-, alphaS2-, beta- and kappa-caseins by hydrophobic interaction chromatography.

Separation and determination of denatured alpha-, beta- and kappa-caseins by hydrophobic interaction chromatography (HIC) was improved by using a TSK-Gel Ether-5PW column (Tosoh Biosep). The method, already proposed and performed by a TSK-Gel Phenyl-5PW column (Tosoh Biosep), is based on fast and easy solubilization of commercial and real samples by 4.0 M guanidine thiocyanate and HIC analysis in the presence of 8.0 M urea in the mobile phase. Employment of the less hydrophobic ether phase had the main advantage of separating casein fractions in less than 22 min and, additionally, of separating a-casein in kappaS1- and alphaS2 -casein fractions. The method has been validated by the analysis of reference skim milk powder (BCR-063R) certified for total nitrogen content. A linear relationship between the concentration of casein and peak area (UV absorbance detector at 280 nm) has been obtained over the concentration range of 0.5-40 microM. The detection limit for alpha-, beta- and kappa-caseins ranged between 0.33 and 0.65 microM. The precision of the method was evaluated, the RSDs for alphaS1-, alphaS2-, beta- and kappa-casein determination ranging between 2.3 and 5.5% for standard solutions and between 4.4 and 6.2% for real sample solutions. The mean value of casein content found in eight aliquots of BCR-063R calculated with respect to the total protein content (estimated on the basis of certified total nitrogen content) was 78.3 +/- 6.1%. Results of linear fitting of standard additions data of alphaS1-, alphaS2-, beta- and kappa-caseins to BCR-063R were compared with linear fitting of alphaS1-, alphaS2-, beta- and kappa-casein calibration data. The method was applied to commercial caseins and to 30 real, raw samples. A statistical comparison was performed between results on quantitation of alpha-, beta- and kappa-caseins obtained by TSK-Gel Ether-5PW and TSK-Gel Phenyl-5PW HIC columns, showing more accurate results for chromatographic analysis performed by the ether column.

Caseins↗