Biomedical subjects

Emiliano Fratini

Publications and source records attributed to Emiliano Fratini.

8 recordsLinked to original sources

PubMed2007

Insights into hofmeister mechanisms: anion and degassing effects on the cloud point of dioctanoylphosphatidylcholine/water systems.

Water dispersions of dioctanoylphosphatidylcholine (diC8PC) exhibit upper consolute curves. How they are affected by some salts and other additives (D2O, urea) has already been explored and the phase separation has been interpreted within the framework of the Blankschtein-Thurston-Benedek (BTB) model. This deduces the chemical potential gain in micellar growth (Deltamu) and the intermicellar interaction coefficient (C) as fitting parameters from the coexistence curves. But, the specific mechanisms that drive such phenomena have remained obscure. To identify these mechanisms, we investigate the effects of a range of anions on the cloud points of diC8PC/H2O systems and extract the phenomenological parameters of the BTB model. We show how these parameters, for micellar growth, i.e., surface, intramolecular interactions, and for interaggregate interactions, i.e., bulk solute effects, are connected to anionic polarizabilities. Nonelectrostatic (NES) quantum mechanical fluctuation (Lifshitz or dispersion) forces missing from conventional theories are then shown to regulate lyotropic Hofmeister effects, both explicitly and implicitly.

Journal Article↗

PubMed2006

Near-infrared spectroscopy investigation of the water confined in tricalcium silicate pastes.

Near-infrared (NIR) spectroscopy has been employed to investigate the evolution of the vibrational spectrum of water entrapped in a tricalcium silicate paste. The overall free water, which decreases as a function of time due to the formation of the hydrated phases (portlandite, Ca(OH)(2), and hydrated calcium silicate, C-S-H) during the hydration reaction, is quantified by the decrease in the area of the NIR band at about 5000 cm(-1). The coexistence of two types of water in the hydrated phases (a "surface-interacting water" (type I) and a "bulklike water" (type II)) during the hydration is obtained by the analysis of the band at about 7000 cm(-1). The deconvolution of this band allows the quantification of the two water types. As the reaction advances, part of the "bulklike water" is converted to "surface-interacting water" in direct agreement with the C-S-H surface development. Finally, the Ca(OH)(2) formation can be concurrently monitored by NIR through the increase of a very sharp peak at 7083 cm(-1). Near-infrared spectroscopy allows determination in a very simple way of the most important features of the tricalcium silicate setting process.

Calcium Compounds↗

PubMed2006

Nanotubes from a vitamin C-based bolaamphiphile.

A bolaform surfactant, 1,12-diascorbyl dodecanedioate (BOLA12), with ascorbic acid units as the polar headgroups was synthesized for the first time. Once dispersed in water above 0.5% w/w, BOLA12 forms hollow nanotubes as revealed by cryo-TEM experiments. These nanostructures transform into clear micellar solutions on heating. X-ray diffraction and SAXS experiments were performed both on the pure solid and on its aqueous dispersions. The critical aggregation concentration and the phase behavior were determined by conductivity and DSC experiments. The latter technique provided also the amount of strongly bound, solvating water molecules that surround the polar headgroups. BOLA12 shows the same reducing properties of ascorbic acid, as indicated by the antioxidant activity evaluated with the DPPH method. This feature was used for the reduction of Pd(II) ions on the surface of the nanoassemblies, which lead to the formation of large bundles homogeneously coated with palladium as observed in SEM micrographs.

Ascorbic Acid↗

PubMed2006

SANS analysis of the microstructural evolution during the aging of pyrolysis oils from biomass.

In this paper, we report for the first time a microstructural characterization of pyrolysis oils obtained from biomass. Bio crude oils (BCOs) are good candidates as substitutes for mineral oils as fuels. By using small-angle neutron scattering (SANS), we show that BCOs are nanostructured fluids constituted by a complex continuous phase and nanoparticles mainly formed by the association of units of pyrolytic lignins. The aggregation of these units during the time produces branched structures with fractal dimension D(f) between 1.4 and 1.5, which are responsible for BCO aging. SANS results fully support the recently formulated thermal ejection theory, accounting for the mechanism of formation of the lignin fraction in oils obtained from fast pyrolysis of biomass.

Journal Article↗

PubMed2005

Effective long-range attraction between protein molecules in solutions studied by small angle neutron scattering.

Small angle neutron scattering intensity distributions taken from cytochrome C and lysozyme protein solutions show a rising intensity at a very small wave vector Q, which can be interpreted in terms of the presence of a weak long-range attraction between protein molecules. This interaction has a range several times that of the diameter of the protein molecule, much greater than the range of the screened electrostatic repulsion. We show evidence that this long-range attraction is closely related to the type of anion present and ion concentration in the solution.

Animals↗

PubMed2005

Hydration process of cement in the presence of a cellulosic additive. A calorimetric investigation.

In the cement industry, the extrusion technique is used to produce flat shapes with improved resistance to compression. Extrusion is a plastic-forming process that consists of forcing a highly viscous plastic mixture through a shaped die. The material should be fluid enough to be mixed and to pass through the die, and on the other hand, the extruded specimen should be stiff enough to be handled without changing in shape or cracking. These characteristics are industrially obtained by adding cellulosic polymers to the mixture. The aim of this work is to understand the action mechanism of these additives on the major pure phases constituting a typical Portland cement: tricalcium silicate (C(3)S), dicalcium silicate (C(2)S), tricalcium aluminate (C(3)A), and tetracalcium iron-aluminate (C(4)AF). In particular, a methylhydroxyethyl cellulose (MHEC) was selected from the best-performing polymers for further study. The effect of this additive on the hydration kinetics (rate constants, activation energies, and diffusional constants) was evaluated by means of differential scanning calorimetry (DSC) while the hydration products were studied by using thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). MHEC addition in calcium silicate pastes produces an increase in the induction time without affecting the nucleation-and-growth period. A less dense CSH gel was deduced from the diffusional constants in the presence of MHEC. Moreover, CSH laminar features and poorly structured hydrates were noted during the first hours of hydration. In the case of the aluminous phases, the additive inhibits the growth of stable cubic hydrated phases (C(3)AH(6)), with the advantage of the metastable hexagonal phases being formed in the earliest minutes of hydration.

Aluminum Compounds↗

PubMed2004

Quasielastic and inelastic neutron scattering on hydrated calcium silicate pastes.

Using the inverse geometry spectrometer QENS at the Intense Pulsed Neutron Source of the Argonne National Laboratory, we collected quasielastic and inelastic neutron scattering spectra of hydrated tricalcium and dicalcium silicate, the main components of ordinary Portland cement. Data were obtained at different curing time, from a few hours to several months. Both the quasielastic and inelastic spectra have been analyzed at the same time according to the relaxing cage model, which is a model developed to describe the dynamics of water at supercooled temperatures. Short-time and long-time dynamics of hydration water in hydrated cement pastes as a function of the curing time have been simultaneously obtained. The results confirm the findings reported in previous experiments showing that it is possible to fit consistently the quasielastic and inelastic spectra giving insights on the effect of the curing time on the short-time vibrational dynamics of hydration water.

Journal Article↗

PubMed2003

Neutron- and light-scattering studies of the liquid-to-glass and glass-to-glass transitions in dense copolymer micellar solutions.

Recent mode coupling theory (MCT) calculations show that if a short-range attractive interaction is added to the pure hard sphere system, one may observe a new type of glass originating from the clustering effect (the attractive glass) as a result of the attractive interaction. This is in addition to the known glass-forming mechanism due to the cage effect in the hard sphere system (the repulsive glass). The calculations also indicate that if the range of attraction is sufficiently short compared to the diameter of the particle, within a certain interval of volume fractions where the two glass-forming mechanisms nearly balance each other, varying the external control parameter, the effective temperature, makes the glass-to-liquid-to-glass reentrance and the glass-to-glass transitions possible. Here we present experimental evidence of both transitions, obtained from small-angle neutron-scattering and photon correlation measurements taken from dense L64 copolymer micellar solutions in heavy water. Varying the temperature in certain predicted volume fraction range triggers a sharp transition between these two different types of glass. In particular, according to MCT, there is an end point (called A3 singularity) of this glass-to-glass transition line, beyond which the long-time dynamics of the two glasses become identical. Our findings confirm this theoretical prediction. Surprisingly, although the Debye-Waller factors, the long-time limit of the coherent intermediate scattering functions, of these two glasses obtained from photon correlation measurements indeed become identical at the predicted volume fraction, they exhibit distinctly different intermediate time relaxation. Furthermore, our experimental results obtained from volume fractions beyond the end point are characterized by the same features as the repulsive glass obtained before the end point. A complete phase diagram giving the boundaries of the structural arrest transitions for L64 micellar system is given.

Journal Article↗