Biomedical subjects

Eric Barklis

Publications and source records attributed to Eric Barklis.

12 recordsLinked to original sources

PubMed2006

Human immunodeficiency virus type 1 matrix protein assembles on membranes as a hexamer.

The membrane-binding matrix (MA) domain of the human immunodeficiency virus type 1 (HIV-1) structural precursor Gag (PrGag) protein oligomerizes in solution as a trimer and crystallizes in three dimensions as a trimer unit. A number of models have been proposed to explain how MA trimers might align with respect to PrGag capsid (CA) N-terminal domains (NTDs), which assemble hexagonal lattices. We have examined the binding of naturally myristoylated HIV-1 matrix (MyrMA) and matrix plus capsid (MyrMACA) proteins on membranes in vitro. Unexpectedly, MyrMA and MyrMACA proteins both assembled hexagonal cage lattices on phosphatidylserine-cholesterol membranes. Membrane-bound MyrMA proteins did not organize into trimer units but, rather, organized into hexamer rings. Our results yield a model in which MA domains stack directly above NTD hexamers in immature particles, and they have implications for HIV assembly and interactions between MA and the viral membrane glycoproteins.

Gene Products, gag↗

PubMed2005

Mutations affecting cleavage at the p10-capsid protease cleavage site block Rous sarcoma virus replication.

A series of amino acid substitutions (M239F, M239G, P240F, V241G) were placed in the p10-CA protease cleavage site (VVAM*PVVI) to change the rate of cleavage of the junction. The effects of these substitutions on p10-CA cleavage by RSV PR were confirmed by measuring the kinetics of cleavage of model peptide substrates containing the wild type and mutant p10-CA sites. The effects of these substitutions on processing of the Gag polyprotein were determined by labeling Gag transfected COS-1 cells with 35S-Met and -Cys, and immunoprecipitation of Gag and its cleavage products from the media and lysate fractions. All substitutions except M239F caused decreases in detectable Gag processing and subsequent release from cells. Several of the mutants also caused defects in production of the three CA proteins. The p10-CA mutations were subcloned into an RSV proviral vector (RCAN) and introduced into a chick embryo fibroblast cell line (DF-1). All of the mutations except M239F blocked RSV replication. In addition, the effects of the M239F and M239G substitutions on the morphology of released virus particles were examined by electron microscopy. While the M239F particles appeared similar to wild type particles, M239G particles contained cores that were large and misshapen. These results suggest that mutations affecting cleavage at the p10-CA protease cleavage site block RSV replication and can have a negative impact on virus particle morphology.

Animals↗

PubMed2005

Assembly of human immunodeficiency virus precursor gag proteins.

To investigate the mechanism by which human immunodeficiency virus (HIV) precursor Gag (PrGag) proteins assemble to form immature virus particles, we examined the in vitro assembly of MACANC proteins, composed of the PrGag matrix, capsid, and nucleocapsid domains. In the absence of other components, MACANC proteins assembled efficiently at physiological temperature but inefficiently at lower temperatures. However, the addition of RNA reduced the temperature sensitivity of assembly reactions. Assembly of MACANC proteins also was affected by pH because the proteins preferentially formed tubes at pH 6.0, whereas spheres were obtained at pH 8.0. Because neither tubes nor spheres were amenable to analysis of protein-protein contacts, we also examined the membrane-bound assemblies of MACANC proteins. Interestingly, MACANC proteins organized on membranes in tightly packed hexameric rings. The observed hexamer spacing of 79.7 A is consistent with the notion that more PrGag proteins assemble into virions than are needed to provide capsid proteins for mature virus cores. Our data are also consistent with a model for PrGag contacts in immature virions where capsid hexamers are tightly packed, where nucleocapsid domains align beneath capsid C-terminal domains, and where matrix domains form trimers at the nexus of three neighbor hexamers.

Gene Products, gag↗

PubMed2005

Analysis of human immunodeficiency virus type 1 Gag dimerization-induced assembly.

The nucleocapsid (NC) domains of retrovirus precursor Gag (PrGag) proteins play an essential role in virus assembly. Evidence suggests that NC binding to viral RNA promotes dimerization of PrGag capsid (CA) domains, which triggers assembly of CA N-terminal domains (NTDs) into hexamer rings that are interconnected by CA C-terminal domains. To examine the influence of dimerization on human immunodeficiency virus type 1 (HIV-1) Gag protein assembly in vitro, we analyzed the assembly properties of Gag proteins in which NC domains were replaced with cysteine residues that could be linked via chemical treatment. In accordance with the model that Gag protein pairing triggers assembly, we found that cysteine cross-linking or oxidation reagents induced the assembly of virus-like particles. However, efficient assembly also was observed to be temperature dependent or required the tethering of NTDs. Our results suggest a multistep pathway for HIV-1 Gag protein assembly. In the first step, Gag protein pairing through NC-RNA interactions or C-terminal cysteine linkage fosters dimerization. Next, a conformational change converts assembly-restricted dimers or small oligomers into assembly-competent ones. At the final stage, final particle assembly occurs, possibly through a set of larger intermediates.

DNA, Viral↗

PubMed2005

Virus particle core defects caused by mutations in the human immunodeficiency virus capsid N-terminal domain.

The N-terminal domains (NTDs) of the human immunodeficiency virus type 1 (HIV-1) capsid (CA) protein have been modeled to form hexamer rings in the mature cores of virions. In vitro, hexamer ring units organize into either tubes or spheres, in a pH-dependent fashion. To probe factors which might govern hexamer assembly preferences in vivo, we examined the effects of mutations at CA histidine residue 84 (H84), modeled at the outer edges of NTD hexamers, as well as a nearby histidine (H87) in the cyclophilin A (CypA) binding loop. Although mutations at H87 yielded infectious virions, mutations at H84 produced assembly-competent but poorly infectious virions. The H84 mutant viruses incorporated wild-type levels of CypA and viral RNAs and showed nearly normal signals in virus entry assays. However, mutant CA proteins assembled aberrant virus cores, and mutant core fractions retained abnormally high levels of CA but reduced reverse transcriptase activities. Our results suggest that HIV-1 CA residue 84 contributes to a structure which helps control either NTD hexamer assembly or the organization of hexamers into higher-order structures.

Capsid↗

PubMed2003

Antiviral inhibition of the HIV-1 capsid protein.

During the assembly stage of the human immunodeficiency virus (HIV) replication cycle, several thousand copies of the viral Gag polyprotein associate at the cell membrane and bud to form an immature, non-infectious virion. Gag is subsequently cleaved by the protease, which liberates the capsid proteins for assembly into the polyprotein shell of the central core particle (or capsid) of the mature virus. Viral infectivity is critically dependent on capsid formation and stability, making the capsid protein a potentially attractive antiviral target. We have identified compounds that bind to an apical site on the N-terminal domain of the HIV-1 capsid protein and inhibit capsid assembly in vitro. One compound, N-(3-chloro-4-methylphenyl)-N'-[2-[([5-[(dimethylamino)-methyl]-2-furyl]-methyl)-sulfanyl]ethyl]urea) (CAP-1), is well tolerated in cell cultures, enabling in vivo antiviral and mechanistic studies. CAP-1 inhibits HIV-1 infectivity in a dose-dependent manner, but does not interfere with viral entry, reverse transcription, integration, proteolytic processing, or virus production, indicating a novel antiviral mechanism. Significantly, virus particles generated in the presence of CAP-1 exhibit heterogeneous sizes and abnormal core morphologies, consistent with inhibited CA-CA interactions during virus assembly and maturation. These findings lay the groundwork for the development of assembly inhibitors as a new class of therapeutic agents for the treatment of AIDS.

Anti-HIV Agents↗

PubMed2003

Analysis of the retrovirus capsid interdomain linker region.

In structural studies, the retrovirus capsid interdomain linker region has been shown as a flexible connector between the CA N-terminal domain and its C-terminal domain. To analyze the function of the linker region, we have examined the effects of three Moloney murine leukemia virus (M-MuLV) capsid linker mutations/variations in vivo, in the context of the full-length M-MuLV structural precursor protein (PrGag). Two mutations, A1SP and A5SP, respectively, inserted three and seven additional codons within the linker region to test the effects of increased linker lengths. The third variant, HIV/Mo, represented a chimeric HIV-1/M-MuLV PrGag protein, fused at the linker region. When expressed in cells, the three variants reduced the efficiency of virus particle assembly, with PrGag proteins and particles accumulating at the cellular plasma membranes. Although PrGag recognition of viral RNA was not impaired, the capsid linker variant particles were abnormal, with decreased stabilities, anomalous densities, and aberrant multiple lobed and tubular morphologies. Additionally, rather than crosslinking as PrGag dimers, particle-associated A1SP, A5SP, and HIV/Mo proteins showed an increased propensity to crosslink as trimers. Our results suggest that a wild-type retrovirus capsid linker region is required for the proper alignment of capsid protein domains.

3T3 Cells↗

PubMed2003

Retrovirus capsid protein assembly arrangements.

During retrovirus particle assembly and morphogenesis, the retrovirus structural (Gag) proteins organize into two different arrangements: an immature form assembled by precursor Gag (PrGag) proteins; and a mature form, composed of proteins processed from PrGag. Central to both Gag protein arrangements is the capsid (CA) protein, a domain of PrGag, which is cleaved from the precursor to yield a mature Gag protein composed of an N-terminal domain (NTD), a flexible linker region, and a C-terminal domain (CTD). Because Gag interactions have proven difficult to examine in virions, a number of investigations have focused on the analysis of structures assembled in vitro. We have used electron microscope (EM) image reconstruction techniques to examine assembly products formed by two different CA variants of both human immunodeficiency virus type 1 (HIV-1) and the Moloney murine leukemia virus (M-MuLV). Interestingly, two types of hexameric protein arrangements were observed for each virus type. One organizational scheme featured hexamers composed of putative NTD dimer subunits, with sharing of subunits between neighbor hexamers. The second arrangement used apparent NTD monomers to coordinate hexamers, involved no subunit sharing, and employed putative CTD interactions to connect hexamers. Conversion between the two assembly forms may be achieved by making or breaking the proposed symmetric NTD dimer contacts in a process that appears to mimic viral morphogenesis.

Amino Acid Sequence↗

PubMed2002

Hexagonal organization of Moloney murine leukemia virus capsid proteins.

To help elucidate the mechanisms by which retrovirus structural proteins associate to form virus particles, we have examined membrane-bound assemblies of Moloney murine leukemia virus (M-MuLV) capsid (CA) proteins. Electron microscopy and image reconstruction techniques showed that CA dimers appear to function as organizational subunits of the cage-like, membrane-bound protein arrays. However, new three-dimensional (3D) data also were consistent with hexagonal (p6) assembly models. The p6 3D reconstructions of membrane-bound M-MuLV CA proteins gave unit cells of a = b = 80.3 A, c = 110 A, gamma = 120 degrees, in which six dimer units formed a cage lattice. Neighbor cage hole-to-hole distances were 45 A, while distances between hexagonal cage holes corresponded to unit cell lengths (80.3 A). The hexagonal model predicts two types of cage holes (trimer and hexamer holes), uses symmetric head-to-head dimer building blocks, and permits the introduction of lattice curvature by conversion of hexamer to pentamer units. The M-MuLV CA lattice is similar to those formed in helical tubes by HIV CA in that hexamer units surround cage holes of 25-30 A, but differs in that M-MuLV hexamer units appear to be CA dimers, whereas HIV CA units appear to be monomers. These results suggest that while general assembly principles apply to different retroviruses, clear assembly distinctions exist between these virus types.

Capsid↗

PubMed2002

Hantavirus nucleocapsid protein coiled-coil domains.

The nucleocapsid (N) proteins of hantaviruses such as the Sin Nombre virus (SNV) bind to membranes and viral RNAs, associate with transcription and replication complexes, and oligomerize during the process of virus assembly. N proteins trimerize in vitro and in vivo, and associate via assembly domains at their amino- and carboxyl-terminal ends. Because structure prediction algorithms suggested that N protein residues 3-75 form two coiled-coil motifs separated by an intervening kink or turn sequence, we examined the properties of peptides representing SNV N protein residues 3-35, 43-75, and 3-75. Of the three peptides, N-(3-35) assembled coiled-coil oligomers only at high concentration and low temperature. In contrast, N-(43-75) efficiently trimerized at low concentration, implying that it carries a coiled-coil trigger sequence. Interestingly, while the longer peptide, N-(3-75), assembled dimers and/or trimers at high concentration, at low concentration it appeared to adopt an intramolecular helix-turn-helix conformation. These results suggest that N protein oligomerization involves the bundling of intramolecular antiparallel coils or a conformational switch from intra- to intermolecular coiled-coils.

Amino Acid Motifs↗

PubMed2002

Analysis of Rous sarcoma virus capsid protein variants assembled on lipid monolayers.

During assembly and morphogenesis of Rous sarcoma virus (RSV), proteolytic processing of the structural precursor (Pr76Gag) protein generates three capsid (CA) protein variants, CA476, CA479, and CA488. The proteins share identical N-terminal domains (NTDs), but are truncated at residues corresponding to gag codons 476, 479, and 488 in their CA C-terminal domains (CTDs). To characterize oligomeric forms of the RSV CA variants, we examined 2D crystals of the capsid proteins, assembled on lipid monolayers. Using electron microscopy and image analysis approaches, the CA proteins were observed to organize in hexagonal (p6) arrangements, where rings of membrane-proximal NTD hexamers were spaced at 95 A intervals. Differences between the oligomeric structures of the CA variants were most evident in membrane-distal regions, where apparent CTDs interconnect hexamer rings. In this region, CA488 connections were observed readily, while CA476 and CA479 contacts were resolved poorly, suggesting that in vivo processing of CA488 to the shorter forms may permit virions to adopt a dissembly-competent conformation. In addition to crystalline arrays, the CA479 and CA488 proteins formed small spherical particles with diameters of 165-175 A. The spheres appear to be arranged from hexamer or hexamer plus pentamer ring subunits that are related to the 2D crystal forms. Our results implicate RSV CA hexamer rings as basic elements in the assembly of RSV virus cores.

Amino Acid Sequence↗

PubMed2002

EMXtalOrg: an EM tilt data organization and processing system.

The EMXtalOrg software package organizes and processes electron microscope (EM) data from indexed images of tilted two-dimensional (2D) protein crystals. The package, which is freely available, was written to facilitate the processing of amplitude and phase (aph) data from 2D EM projections into three-dimensional (3D) reconstructions. The suite takes as input contrast transfer function corrected aph files and generates lattice line data to yield HKL files which can be output for viewing 3D structures with existing data visualization programs. Additionally, the package offers a number of other processing features, and provides a convenient graphical interface for several image processing programs devoted to the analysis of 2D crystals. The package is written in the Python scripting language using the Tcl/ Tk toolkit for the graphical user interface, making it portable and easy to modify by the user. The package provides an integrated environment to simplify the process of obtaining 3D structures from 2D crystals.

Crystallization↗