Biomedical subjects

Erica Takai

Publications and source records attributed to Erica Takai.

5 recordsLinked to original sources

PubMed2005

Osteoblast elastic modulus measured by atomic force microscopy is substrate dependent.

The actin and microtubule cytoskeleton have been found to contribute to the elastic modulus of cells, which may be modulated by adhesion to extracellular matrix (ECM) proteins and subsequent alterations in the cytoskeleton. In this study, the apparent elastic modulus (Eapp) of osteoblast-like MC3T3-E1 cells adhered to fibronectin (FN), vitronectin (VN), type I collagen (COLI), fetal bovine serum (FBS), or poly-l-lysine (PLL), and bare glass were determined using an atomic force microscope (AFM). The E(app) of osteoblasts adhered to ECM proteins (FN, VN, COLI, and FBS) that bind cells via integrins were higher compared to cells on glass and PLL, which adhere cells through nonspecific binding. Also, osteoblasts adhered to FN, VN, COLI, and FBS had F-actin stress fiber formation, while osteoblasts on glass and PLL showed few F-actin fibers. Disruption of the actin cytoskeleton decreased E(app) of osteoblasts plated on FN to the level of osteoblasts plated on glass, while microtubule disruption had no significant effect. This suggests that the elevated modulus of osteoblasts adhered to FN was due to remodeling of the actin cytoskeleton upon adhesion to ECM proteins. Modulation of cell stiffness upon adhesion to various substrates may influence mechanosignal transduction in osteoblasts.

Actins↗

PubMed2004

Osteocyte viability and regulation of osteoblast function in a 3D trabecular bone explant under dynamic hydrostatic pressure.

UNLABELLED: A new trabecular bone explant model was used to examine osteocyte-osteoblast interactions under DHP loading. DHP loading enhanced osteocyte viability as well as osteoblast function measured by osteoid formation. However, live osteocytes were necessary for osteoblasts to form osteoids in response to DHP, which directly show osteoblast-osteocyte interactions in this in vitro culture. INTRODUCTION: A trabecular bone explant model was characterized and used to examine the effect of osteocyte and osteoblast interactions and dynamic hydrostatic pressure (DHP) loading on osteocyte viability and osteoblast function in long-term culture. MATERIALS AND METHODS: Trabecular bone cores obtained from metacarpals of calves were cleaned of bone marrow and trabecular surface cells and divided into six groups, (1) live cores + dynamic hydrostatic pressure (DHP), (2) live cores + sham, (3) live cores + osteoblast + DHP, (4) live cores + osteoblast + sham, (5) devitalized cores + osteoblast + DHP, and (6) devitalized cores + osteoblast + sham, with four culture durations (2, 8, 15, and 22 days; n = 4/group). Cores from groups 3-6 were seeded with osteoblasts, and cores from groups 5 and 6 were devitalized before seeding. Groups 1, 3, and 5 were subjected to daily DHP loading. Bone histomorphometry was performed to quantify osteocyte viability based on morphology and to assess osteoblast function based on osteoid surface per bone surface (Os/Bs). TUNEL staining was performed to evaluate the mode of osteocyte death under various conditions. RESULTS: A portion of osteocytes remained viable for the duration of culture. DHP loading significantly enhanced osteocyte viability up to day 8, whereas the presence of seeded osteoblasts significantly decreased osteocyte viability. Cores with live osteocytes showed higher Os/Bs compared with devitalized cores, which reached significant levels over a greater range of time-points when combined with DHP loading. DHP loading did not increase Os/Bs in the absence of live osteocytes. The percentage of apoptotic cells remained the same regardless of treatment or culture duration. CONCLUSION: Enhanced osteocyte viability with DHP suggests the necessity of mechanical stimulation for osteocyte survival in vitro. Furthermore, osteocytes play a critical role in the transmission of signals from DHP loading to modulate osteoblast function. This explant culture model may be used for mechanotransduction studies in long-term cultures.

Animals↗

PubMed2003

Anatomically shaped osteochondral constructs for articular cartilage repair.

Few successful treatment modalities exist for surface-wide, full-thickness lesions of articular cartilage. Functional tissue engineering offers a great potential for the clinical management of such lesions. Our long-term hypothesis is that anatomically shaped tissue constructs of entire articular layers can be engineered in vitro on a bony substrate, for subsequent implantation. To determine the feasibility, this study investigated the development of bilayered scaffolds of chondrocyte-seeded agarose on natural trabecular bone. In a series of three experiments, bovine chondrocytes were seeded in (1) cylindrical bilayered constructs of agarose and bovine trabecular bone, 0.53 cm2 in surface area and 3.2 mm thick, and were cultured for up to 6 weeks; (2) chondrocyte-seeded anatomically shaped agarose constructs reproducing the human patellar articular layer (area=11.7 cm2, mean thickness=3.4 mm), cultured for up to 6 weeks; and (3) chondrocyte-seeded anatomically shaped agarose constructs of the patella (same as above) integrated into a corresponding anatomically shaped trabecular bone substrate, cultured for up to 2 weeks. Articular layer geometry, previously acquired from human cadaver joints, was used in conjunction with computer-aided design and manufacturing technology to create these anatomically accurate molds. In all experiments, chondrocytes remained viable over the entire culture period, with the agarose maintaining its shape while remaining firmly attached to the underlying bony substrate (when present). With culture time, the constructs exhibited positive type II collagen staining as well as increased matrix elaboration (Safranin O staining for glycosaminoglycans) and material properties (Young's modulus and aggregate modulus). Despite the use of relatively large agarose constructs partially integrated with trabecular bone, no adverse diffusion limitation effects were observed. Anatomically shaped constructs on a bony substrate may represent a new paradigm in the design of a functional articular cartilage tissue replacement.

Animals↗

PubMed2003

Trabecular bone response to mechanical and parathyroid hormone stimulation: the role of mechanical microenvironment.

UNLABELLED: Bone response under combined mechanical and PTH stimuli is important in osteoporosis. A rat tail animal model with computer modeling was used to examine bone response to loading and PTH. PTH enhances and sustains increased bone formation rate, which directly correlates to mechanical microenvironment, suggesting beneficial effects of combined PTH treatment and exercise in preventing osteoporosis. INTRODUCTION: Using an in vivo rat tail vertebra model combined with a specimen-specific, high-resolution microcomputed tomography (microCT)-based finite element analysis (FEA) technique, trabecular bone response to combined dynamic compressive loading and parathyroid hormone (PTH) stimulation was characterized. MATERIALS AND METHODS: Two hundred twenty-four male Sprague-Dawley rats were randomly divided into seven treatment groups: (1) Control, (2) vehicle + 0N, (3) PTH + 0N, (4) vehicle + 50N, (5) PTH + 50N, (6) vehicle + 100N, and (7) PTH + 100N, with three treatment durations (1, 2, or 4 weeks). Rat PTH(1-34) was administered daily in the PTH-stimulated groups approximately 3 h before daily mechanical stimulation with 0, 50, or 100N dynamic compressive loading. microCT-based FEA was performed for each loaded vertebra after death. Bone histomorphometry was performed on trabecular bone with double fluorochrome labeling to assess bone formation. RESULTS: Daily mechanical loading or PTH administration significantly increased bone formation rate (BFR) compared with control or V + 0N with significant increases in both mineral apposition rate (MAR) and labeled bone surface (LS/BS). PTH, when combined with mechanical loading, enhanced BFR mainly through a significant increase in MAR after the first week and through a significant increase in LS/BS after 2 and 4 weeks. Synergistic effects in BFR were present when PTH was combined with mechanical loading, especially after 2 and 4 weeks, where the increase in BFR was sustained. However, when either PTH or mechanical loading was the only stimulus, the bone formation response diminished to the level of Control animals after 4 weeks. Furthermore, significant correlations were observed between the bone formation indices and trabecular bone tissue mechanical microenvironments at 1 and 2 weeks, with PTH administration enhancing and sustaining these correlations into 4 weeks. CONCLUSIONS: The synergistic effects of combined PTH and mechanical stimulation on trabecular bone formation rate suggest a potential benefit for combined PTH administration and exercise in the treatment of osteoporosis.

Animals↗

PubMed2002

Quantification of a rat tail vertebra model for trabecular bone adaptation studies.

A feedback controlled loading apparatus for the rat tail vertebra was developed to deliver precise mechanical loads to the eighth caudal vertebra (C8) via pins inserted into adjacent vertebrae. Cortical bone strains were recorded using strain gages while subjecting the C8 in four cadaveric rats to mechanical loads ranging from 25 to 100 N at 1 Hz with a sinusoidal waveform. Finite element (FE) models, based on micro computed tomography, were constructed for all four C8 for calculations of cortical and trabecular bone tissue strains. The cortical bone strains predicted by FE models agreed with strain gage measurements, thus validating the FE models. The average measured cortical bone strain during 25-100 N loading was between 298 +/- 105 and 1210 +/- 297 microstrain (muepsilon). The models predicted average trabecular bone tissue strains ranging between 135 +/- 35 and 538 +/- 138 mu epsilon in the proximal region, 77 +/- 23-307 +/- 91 muepsilon in the central region, and 155 +/- 36-621 +/- 143 muepsilon in the distal region for 25-100 N loading range. Although these average strains were compressive, it is also interesting that the trabecular bone tissue strain can range from compressive to tensile strains (-1994 to 380 mu epsilon for a 100 N load). With this novel approach that combines an animal model with computational techniques, it could be possible to establish a quantitative relationship between the microscopic stress/strain environment in trabecular bone tissue, and the biosynthetic response and gene expression of bone cells, thereby study bone adaptation.

Adaptation, Physiological↗