Biomedical subjects

Erich P Ippen

Publications and source records attributed to Erich P Ippen.

10 recordsLinked to original sources

PubMed2006

Universally balanced photonic interferometers.

A new general class of optical interferometers is proposed, and the physical principle of their operation is explained. They split the spectrum entering one input port among the interferometer arms in an arbitrarily chosen wavelength- and/or time-dependent manner but guarantee broadband constructive interference into a single output port by symmetry. The design relies only on time reversibility of Maxwell's equations and a phase condition that holds for lossless, reflectionless four-ports. As an application, a new Vernier scheme is proposed to multiply the tuning and free spectral range of microphotonic add-drop filters. It provides effective suppression of both the amplitude and the phase response of unwanted resonant passbands.

Journal Article↗

PubMed2006

Multistage high-order microring-resonator add-drop filters.

We propose and demonstrate a multistage design for microphotonic add-drop filters that provides reduced drop-port loss and relaxed tolerances for achieving high in-band extinction. As a result, the first microring-resonator filters with a rectangular notch stopband in the through port (to our knowledge) are shown, with extinctions exceeding 50 dB. Reaching 30 dB beyond previous results, without postfabrication trimming, such extinction levels open the door to microphotonic notch circuits for spectroscopy, wavelength conversion, and quantum cryptography applications. Combined with a low-loss, high-index-contrast electromagnetic design in SiN and frequency-matched microring resonators, this approach led to the first demonstration of flattop microphotonic filters meeting the stringent criteria for high-spectral-efficiency integrated add-drop multiplexers. The 40 GHz wide filters show a 20 nm free spectral range, 2 dB drop loss, and suppression of adjacent channels by over 30 dB.

Journal Article↗

PubMed2006

Ultrawide tuning of photonic microcavities via evanescent field perturbation.

Evanescent field perturbation of an integrated microring resonator is examined as a means of achieving high-fidelity reversible tuning of photonic microcavities over large wavelength ranges. A 1.7% wavelength tuning is achieved through the use of a novel silica fiber probe that provides access to the evanescent field of an air-clad high-index-contrast ring resonator. As the microring is perturbed, the probe-ring distance is found through simultaneous nanometric distance calibration and force measurements. Experimental results agree well with theoretical tuning. Possible microelectromechanical systems implementation of this effect is discussed, as well as avenues for improvement of the tuning range.

Journal Article↗

PubMed2006

Achieving centimetre-scale supercollimation in a large-area two-dimensional photonic crystal.

Diffraction, a fundamental process in wave physics, leads to spreading of the optical beams as they propagate. However, new photonic crystal (PhC) meta-materials can be nano-engineered to generate extreme anisotropy, resulting in apparent propagation of light without diffraction. This surprising phenomenon, called supercollimation, effectively freezes the spatial width of a light beam inside a PhC, observed over a few isotropic diffraction-lengths. However, using such experiments to predict the behaviour for longer propagation lengths is difficult, as a tiny error in a measured width can extrapolate to order unity uncertainty in the width at distances over hundreds of diffraction-lengths. Here, supercollimation is demonstrated in a macroscopic PhC system over centimetre-scale distances, retaining spatial width confinement without the need for waveguides or nonlinearities. Through quantitative studies of the beam evolution in a two-dimensional PhC, we find that supercollimation possesses unexpected but inherent robustness with respect to short-scale disorder such as fabrication roughness, enabling supercollimation over 600 isotropic diffraction-lengths. The effects of disorder are identified through experiments and understood through rigorous simulations. In addition, a supercollimation steering capability is proposed.

Journal Article↗

PubMed2005

Demonstration of a HeNe/CH4-based optical molecular clock.

We implement a simple optical clock based on the F2(2) [P(7), v3] optical transition in methane. A single femtosecond laser's frequency comb undergoes difference frequency generation to provide an IR comb at 3.39 microm with a null carrier-envelope offset. This IR comb provides a phase-coherent link between the 88-THz optical reference and the rf repetition rate. Comparison of the repetition rate signal with a second femtosecond comb stabilized to molecular iodine shows an instability of 1.2 x 10(-13) at 1 s, limited by microwave detection of the repetition rates. The single-sideband phase noise of the microwave signal, normalized to a carrier frequency of 1 GHz, is below -93 dBc/Hz at 1-Hz offset.

Journal Article↗

PubMed2004

A three-dimensional optical photonic crystal with designed point defects.

Photonic crystals offer unprecedented opportunities for miniaturization and integration of optical devices. They also exhibit a variety of new physical phenomena, including suppression or enhancement of spontaneous emission, low-threshold lasing, and quantum information processing. Various techniques for the fabrication of three-dimensional (3D) photonic crystals--such as silicon micromachining, wafer fusion bonding, holographic lithography, self-assembly, angled-etching, micromanipulation, glancing-angle deposition and auto-cloning--have been proposed and demonstrated with different levels of success. However, a critical step towards the fabrication of functional 3D devices, that is, the incorporation of microcavities or waveguides in a controllable way, has not been achieved at optical wavelengths. Here we present the fabrication of 3D photonic crystals that are particularly suited for optical device integration using a lithographic layer-by-layer approach. Point-defect microcavities are introduced during the fabrication process and optical measurements show they have resonant signatures around telecommunications wavelengths (1.3-1.5 microm). Measurements of reflectance and transmittance at near-infrared are in good agreement with numerical simulations.

Journal Article↗

PubMed2003

Orthogonal control of the frequency comb dynamics of a mode-locked laser diode.

We have performed detailed studies on the dynamics of a frequency comb produced by a mode-locked laser diode (MLLD). Orthogonal control of the pulse repetition rate and the pulse-to-pulse carrier-envelope phase slippage is achieved by appropriate combinations of the respective error signals to actuate the diode injection current and the saturable absorber bias voltage. Phase coherence is established between the MLLD at 1550 nm and a 775-nm mode-locked Ti:sapphire laser working as part of an optical atomic clock.

Journal Article↗

PubMed2003

Ultralow-jitter, 1550-nm mode-locked semiconductor laser synchronized to a visible optical frequency standard.

Using high-bandwidth feedback, we have synchronized the pulse train from a mode-locked semiconductor laser to an external optical atomic clock signal and achieved what is to our knowledge the lowest timing jitter to date (22 fs, integrated from 1 Hz to 100 MHz) for such devices. The performance is limited by the intrinsic noise of the phase detector used for timing-jitter measurement. We expect such a highly stable device to play an important role in fiber-network-based precise time/frequency distribution.

Journal Article↗

PubMed2003

Timing jitter eater for optical pulse trains.

Using a single phase modulator and dispersive fiber, we demonstrate a 12-dB reduction in the phase noise of a train of 6.5-ps pulses at a repetition rate of 10 GHz. A prechirp fiber is shown to improve performance.

Journal Article↗

PubMed2003

All-optical pulse regeneration in an ultrafast nonlinear interferometer with Faraday mirror polarization stabilization.

We demonstrate the folded ultrafast nonlinear interferometer (FUNI) as a 3R all-optical regenerator. Faraday rotation provides inherent polarization stabilization, and the optical fiber nonlinear medium provides ultrafast operation and switching window tunability. We demonstrate 3R regeneration of 10-Gbit/s data with 5-pJ pulse switching energy and 4-ps timing-jitter tolerance.

Journal Article↗