PubMed Health⌕ Search

Biomedical subjects

Erik Johansson

Publications and source records attributed to Erik Johansson.

At least 19 recordsLinked to original sources

Decoding nucleoside supplementation: how thymidine outperforms ribonucleosides in accelerating mammalian replication forks.

Disruptions in deoxynucleoside triphosphate (dNTP) supply impair DNA replication and lead to genomic instability. While exogenous ribonucleosides (rNuc) have been suggested to alleviate replication stress by increasing dNTP levels, their precise metabolic effects remain unclear. Here, we show that rNuc supplementation primarily elevates CTP and UTP levels, with only modest increases in dCTP, and has minimal impact on replication fork speed across multiple mammalian cell lines. In contrast, thymidine (dThd), either alone or in combination with rNuc-as in EmbryoMax Nucleosides-significantly increases dTTP and dGTP levels, leading to accelerated replication fork progression. Notably, dThd, rather than rNuc, drives fork acceleration and counteracts fork slowdown caused by elevated dUTP, consistent with primer extension assays showing that dUTP transiently inhibits Pol ϵ-mediated DNA synthesis at template adenines. These results clarify the distinct roles of nucleosides in nucleotide metabolism, providing a mechanistic basis for how dThd promotes fork progression and preserves genomic stability.

DNA Replication↗

The vault exterior shell is a dynamic structure that allows incorporation of vault-associated proteins into its interior.

Vaults are 13 million Da ribonucleoprotein particles with a highly conserved structure. Expression and assembly by multimerization of an estimated 96 copies of a single protein, termed the major vault protein (MVP), is sufficient to form the minimal structure and entire exterior shell of the barrel-shaped vault particle. Multiple copies of two additional proteins, VPARP and TEP1, and a small untranslated vault RNA are also associated with vaults. We used the Sf9 insect cell expression system to form MVP-only recombinant vaults and performed a series of protein-mixing experiments to test whether this particle shell is able to exclude exogenous proteins from interacting with the vault interior. Surprisingly, we found that VPARP and TEP1 are able to incorporate into vaults even after the formation of the MVP vault particle shell is complete. Electrospray molecular mobility analysis and spectroscopic studies of vault-interacting proteins were used to confirm this result. Our results demonstrate that the protein shell of the recombinant vault particle is a dynamic structure and suggest a possible mechanism for in vivo assembly of vault-interacting proteins into preformed vaults. Finally, this study suggests that the vault interior may functionally interact with the cellular milieu.

Animals↗

The MAPK Hog1p modulates Fps1p-dependent arsenite uptake and tolerance in yeast.

Arsenic is widely distributed in nature and all organisms possess regulatory mechanisms to evade toxicity and acquire tolerance. Yet, little is known about arsenic sensing and signaling mechanisms or about their impact on tolerance and detoxification systems. Here, we describe a novel role of the S. cerevisiae mitogen-activated protein kinase Hog1p in protecting cells during exposure to arsenite and the related metalloid antimonite. Cells impaired in Hog1p function are metalloid hypersensitive, whereas cells with elevated Hog1p activity display improved tolerance. Hog1p is phosphorylated in response to arsenite and this phosphorylation requires Ssk1p and Pbs2p. Arsenite-activated Hog1p remains primarily cytoplasmic and does not mediate a major transcriptional response. Instead, hog1delta sensitivity is accompanied by elevated cellular arsenic levels and we demonstrate that increased arsenite influx is dependent on the aquaglyceroporin Fps1p. Fps1p is phosphorylated on threonine 231 in vivo and this phosphorylation critically affects Fps1p activity. Moreover, Hog1p is shown to affect Fps1p phosphorylation. Our data are the first to demonstrate Hog1p activation by metalloids and provides a mechanism by which this kinase contributes to tolerance acquisition. Understanding how arsenite/antimonite uptake and toxicity is modulated may prove of value for their use in medical therapy.

Arsenites↗

The influence of urban design on outdoor thermal comfort in the hot, humid city of Colombo, Sri Lanka.

The outdoor environment is deteriorating in many tropical cities due to rapid urbanization. This leads to a number of problems related to health and well-being of humans and also negatively affects social and commercial outdoor activities. The creation of thermally comfortable microclimates in urban environments is therefore very important. This paper discusses the influence of street-canyon geometry on outdoor thermal comfort in Colombo, Sri Lanka. Five sites with different urban geometry, ground cover, and distance from the sea were studied during the warmest season. The environmental parameters affecting thermal comfort, viz. air temperature, humidity, wind speed, and solar radiation, were measured, and the thermal comfort was estimated by calculating the physiologically equivalent temperature (PET). The thermal comfort is far above the assumed comfort zone due to the combination of intense solar radiation, high temperatures, and low wind speeds, especially on clear days. The worst conditions were found in wide streets with low-rise buildings and no shade trees. The most comfortable conditions were found in narrow streets with tall buildings, especially if shade trees were present, as well as in areas near the coast where the sea breeze had a positive effect. In order to improve the outdoor comfort in Colombo, it is suggested to allow a more compact urban form with deeper street canyons and to provide additional shade through the use of trees, covered walkways, pedestrian arcades, etc. The opening up of the city's coastal strip would allow the sea breeze to penetrate further into the city.

Cities↗

Megavariate analysis of environmental QSAR data. Part II--investigating very complex problem formulations using hierarchical, non-linear and batch-wise extensions of PCA and PLS.

Three extensions of the basic PCA and PLS methodologies are described. These extensions are hierarchical, non-linear and batch-based in nature. The objectives of these methods are to assist in problem understanding and problem solving in very complex (QSAR) problem formulations. The method extensions are illustrated using two example QSAR data sets containing many X- and Y-variables.

Hazardous Substances↗

Megavariate analysis of environmental QSAR data. Part I--a basic framework founded on principal component analysis (PCA), partial least squares (PLS), and statistical molecular design (SMD).

This paper introduces principal component analysis (PCA), partial least squares projections to latent structures (PLS), and statistical molecular design (SMD) as useful tools in deriving multi- and megavariate quantitative structure-activity relationship (QSAR) models. Two QSAR data sets from the fields of environmental toxicology and environmental chemistry are worked out in detail, showing the benefits of PCA, PLS and SMD. PCA is useful when overviewing a data set and exploring relationships among compounds and relationships among variables. PLS is the regression extension of PCA and is used for establishing QSARs. SMD is essential for selecting informative training and test sets of compounds for QSAR calibration and validation.

Data Interpretation, Statistical↗

Structure of Saccharomyces cerevisiae DNA polymerase epsilon by cryo-electron microscopy.

The structure of the multisubunit yeast DNA polymerase epsilon (Pol epsilon) was determined to 20-A resolution using cryo-EM and single-particle image analysis. A globular domain comprising the catalytic Pol2 subunit is flexibly connected to an extended structure formed by subunits Dpb2, Dpb3 and Dpb4. Consistent with the reported involvement of the latter in interaction with nucleic acids, the Dpb portion of the structure directly faces a single cleft in the Pol2 subunit that seems wide enough to accommodate double-stranded DNA. Primer-extension experiments reveal that Pol epsilon processivity requires a minimum length of primer-template duplex that corresponds to the dimensions of the extended Dpb structure. Together, these observations suggest a mechanism for interaction of Pol epsilon with DNA that might explain how the structure of the enzyme contributes to its intrinsic processivity.

Catalysis↗

A photoactive molecular triad as a nanoscale power supply for a supramolecular machine.

A tetrathiafulvalene-porphyrin-fullerene (TTF-P-C(60)) molecular triad, which generates electrical current by harnessing light energy when self-assembled onto gold electrodes, has been developed. The triad, composed of three unique electroactive components, namely, 1) an electron-donating TTF unit, 2) a chromophoric porphyrin unit, and 3) an electron-accepting C(60) unit, has been synthesized in a modular fashion. A disulfide-based anchoring group was tagged to the TTF end of the molecule in order to allow its self-assembly on gold surfaces. The surface coverage by the triad in a self-assembled monolayer (SAM) was estimated to be 1.4 nm(2) per molecule, a density which is consistent with hexagonal close-packing of the spherical C(60) component (diameter approximately 1 nm). In a closed electronic circuit, a triad-SAM functionalized working-electrode generates a switchable photocurrent of approximately 1.5 microA cm(-2) when irradiated with a 413 nm Kr-ion laser, a wavelength which is close to the porphyrin chromophore's absorption maximum peak at 420 nm. The electrical energy generated by the triad at the expense of the light energy is ultimately exploited to drive a supramolecular machine in the form of a [2]pseudorotaxane comprised of a pi-electron-deficient tetracationic cyclobis(paraquat-p-phenylene) (CBPQT(4+)) cyclophane and a pi-electron-rich 1,5-bis[(2-hydroxyethoxy) ethoxy]naphthalene (BHEEN) thread. The redox-induced dethreading of the CBPQT(4+) cyclophane from the BHEEN thread can be monitored by measuring the increase in the fluorescence intensity of the BHEEN unit. A gradual increase in the fluorescence intensity of the BHEEN unit concomitant with the photocurrent generation, even at a potential (0 V) much lower than that required (-300 mV) for the direct reduction of the CBPQT(4+) unit, confirms that the dethreading process is driven by the photocurrent generated by the triad-SAM.

Nanotechnology↗

Simulations of vapor water clusters at vapor-liquid equilibrium.

The Gibbs-ensemble Monte Carlo methods based on the extended single point charge [H. J. C. Berendsen, J. R. Grigera, and T. P. Straatsma, J. Phys. Chem. 91, 6269 (1987)] potential-energy surface have been used to study the clustering of vapor phase water under vapor-liquid equilibrium conditions between 300 and 600 K. It is seen that the number of clusters, as well as the cluster size, increase with temperature. This is primarily due to the increase in vapor density that accompanies the temperature increase at equilibrium. In addition, due to entropic effects, the percentage of clusters that have linear (or open) topologies increases with temperature and dominates over the minimum-energy cyclic topologies at the temperatures studied here. These results are insensitive to the number of molecules used in the simulations and the criterion used to define a water cluster.

Journal Article↗

Saccharomyces cerevisiae DNA polymerase delta: high fidelity for base substitutions but lower fidelity for single- and multi-base deletions.

Eukaryotic DNA polymerase delta (Pol delta) plays an essential role in replicating large nuclear genomes, a process that must be accurate to maintain stability over many generations. Based on kinetic studies of insertion of individual dNTPs opposite a template guanine, Pol delta is believed to have high selectivity for inserting correct nucleotides. This high selectivity, in conjunction with an intrinsic 3'-exonuclease activity, implies that Pol delta should have high base substitution fidelity. Here we demonstrate that the wild type Saccharomyces cerevisiae three-subunit Pol delta does indeed have high base substitution fidelity for the 12 possible base-base mismatches, producing on average less than 1.3 stable misincorporations/100,000 nucleotides polymerized. Measurements with exonuclease-deficient Pol delta confirm the high nucleotide selectivity of the polymerase and further indicate that proofreading enhances the base substitution fidelity of the wild type enzyme by at least 60-fold. However, Pol delta inefficiently proofreads single nucleotide deletion mismatches in homopolymeric runs, such that the error rate is 30 single nucleotide deletions/100,000 nucleotides polymerized. Moreover, wild type Pol delta frequently deletes larger numbers of nucleotides between distantly spaced direct repeats of three or more base pairs. Although wild type Pol delta and Pol epsilon both have high base substitution fidelity, Pol delta is much less accurate than Pol epsilon for deletions involving repetitive sequences. Thus, strand slippage during replication by wild type Pol delta may be a primary source of insertion and deletion mutagenesis in eukaryotic genomes.

Base Sequence↗

Engineering of vault nanocapsules with enzymatic and fluorescent properties.

One of the central issues facing the emerging field of nanotechnology is cellular compatibility. Nanoparticles have been proposed for diagnostic and therapeutic applications, including drug delivery, gene therapy, biological sensors, and controlled catalysis. Viruses, liposomes, peptides, and synthetic and natural polymers have been engineered for these applications, yet significant limitations continue to prevent their use. Avoidance of the body's natural immune system, lack of targeting specificity, and the inability to control packaging and release are remaining obstacles. We have explored the use of a naturally occurring cellular nanoparticle known as the vault, which is named for its morphology with multiple arches reminiscent of cathedral ceilings. Vaults are 13-MDa ribonucleoprotein particles with an internal cavity large enough to sequester hundreds of proteins. Here, we report a strategy to target and sequester biologically active materials within the vault cavity. Attachment of a vault-targeting peptide to two proteins, luciferase and a variant of GFP, resulted in their sequestration within the vault cavity. The targeted proteins confer enzymatic and fluorescent properties on the recombinant vaults, both of which can be detected by their emission of light. The modified vaults are compatible with living cells. The ability to engineer vault particles with designed properties and functionalities represents an important step toward development of a biocompatible nanocapsule.

Biological Transport, Active↗

Multivariate modeling of cytochrome P450 3A4 inhibition.

In the early phases of current pharmaceutical research projects, huge numbers of compounds are tested on their biological activity with respect to a certain target by experimental or virtual screening campaigns. To reduce the attrition rate in later stages of a project, other relevant properties such as physicochemical and ADMET (absorption, distribution, metabolism, excretion, toxicity) properties should be assessed as early as possible in lead discovery and optimization. The present study describes the development of in silico models to predict the inhibition of human cytochrome P450 3A4 (CYP3A4) from calculated molecular descriptors. The models were trained and validated using a set of 967 structural diverse drug-like research compounds with an experimentally determined CYP3A4 inhibition potency (IC50 value) which was carefully split into a training and a test set. For classification models, the data sets were further subdivided into strong, medium, and weak inhibitors. Different descriptor sets were used to cover various aspects of molecular properties, including properties derived from the 2D structure, the interaction of the molecule with its environment, and properties derived from quantum-mechanical calculations. The descriptors were related to the CYP3A4 inhibition potency by multivariate data analysis methods such as partial least-squares projection to latent structures (PLS), PLS discriminant analysis (PLS-DA), and soft independent class modeling (SIMCA). The squared correlation between experimental and predicted IC50 values of the previously unseen test set compounds was Qext2=0.6 for the best PLS models, corresponding to a root mean squared error (RMSE) of RMSE=0.45 (logarithm of IC50). The best PLS-DA models were able to correctly classify more than 60% of the test set compounds, whereas almost no strong inhibitors were wrongly classified as weak inhibitors and vice versa. Furthermore, relevant molecular properties were identified which are closely related to the CYP3A4 inhibition potency of a compound. The results presented here are very encouraging since our models could, for instance, serve to flag problematic compounds or to guide further synthesis efforts.

Cytochrome P-450 CYP3A↗

Idling by DNA polymerase delta maintains a ligatable nick during lagging-strand DNA replication.

During each yeast cell cycle, approximately 100,000 nicks are generated during lagging-strand DNA replication. Efficient nick processing during Okazaki fragment maturation requires the coordinated action of DNA polymerase delta (Pol delta) and the FLAP endonuclease FEN1. Misregulation of this process leads to the accumulation of double-stranded breaks and cell lethality. Our studies highlight a remarkably efficient mechanism for Okazaki fragment maturation in which Pol delta by default displaces 2-3 nt of any downstream RNA or DNA it encounters. In the presence of FEN1, efficient nick translation ensues, whereby a mixture of mono- and small oligonucleotides are released. If FEN1 is absent or not optimally functional, the ability of Pol delta to back up via its 3'-5'-exonuclease activity, a process called idling, maintains the polymerase at a position that is ideal either for ligation (in case of a DNA-DNA nick) or for subsequent engagement by FEN1 (in case of a DNA-RNA nick). Consistent with the hypothesis that DNA polymerase epsilon is the leading-strand enzyme, we observed no idling by this enzyme and no cooperation with FEN1 for creating a ligatable nick.

DNA↗

Using chemometrics for navigating in the large data sets of genomics, proteomics, and metabonomics (gpm).

This article describes the applicability of multivariate projection techniques, such as principal-component analysis (PCA) and partial least-squares (PLS) projections to latent structures, to the large-volume high-density data structures obtained within genomics, proteomics, and metabonomics. PCA and PLS, and their extensions, derive their usefulness from their ability to analyze data with many, noisy, collinear, and even incomplete variables in both X and Y. Three examples are used as illustrations: the first example is a genomics data set and involves modeling of microarray data of cell cycle-regulated genes in the microorganism Saccharomyces cerevisiae. The second example contains NMR-metabonomics data, measured on urine samples of male rats treated with either of the drugs chloroquine or amiodarone. The third and last data set describes sequence-function classification studies in a set of G-protein-coupled receptors using hierarchical PCA.

Animals↗

Enzymatic switching for efficient and accurate translesion DNA replication.

When cyclobutane pyrimidine dimers stall DNA replication by DNA polymerase (Pol) delta or epsilon, a switch occurs to allow translesion synthesis by DNA polymerase eta, followed by another switch that allows normal replication to resume. In the present study, we investigate these switches using Saccharomyces cerevisiae Pol delta, Pol epsilon and Pol eta and a series of matched and mismatched primer templates that mimic each incorporation needed to completely bypass a cis-syn thymine-thymine (TT) dimer. We report a complementary pattern of substrate use indicating that enzymatic switching involving localized translesion synthesis by Pol eta and mismatch excision and polymerization by a major replicative polymerase can account for the efficient and accurate dimer bypass known to suppress sunlight-induced mutagenesis and skin cancer.

Base Pair Mismatch↗

On-line process control of gradient elution liquid chromatography.

The typical measure of the stability of analytical HPLC methods in the pharmaceutical laboratory is standards injected repeatedly throughout the sample sequence. To obtain improved control of the analysis and reduction of the number of standards and replicates, a novel approach to treat the analytical run as a process, where the chromatographic data is the product, is proposed. Thus, an alternative and continuous system suitability test procedure is described. This is obtained by continuous monitoring of several parameters of the chromatographic system such as pressure, temperature, and conductivity. The data are analyzed in real time with chemometrics to produce easily interpreted control charts. Gradient elution LC is extensively employed in pharmaceutical analysis. A gradient elution system is inherently dynamic due to the mobile-phase composition being changed during the chromatographic run. To handle the dynamics, suitable chemometric tools are needed. In this report, we extend the use of liquid chromatography process control (LCPC) to gradient elution LC by creating partial least-squares regression batch models of the data collected. The gradient elution LCPC system was evaluated by inducing disturbances, and it was shown to easily detect any real or simulated deviation.

Chromatography, Liquid↗

The Pol32 subunit of DNA polymerase delta contains separable domains for processive replication and proliferating cell nuclear antigen (PCNA) binding.

We have carried out a domain analysis of POL32, the third subunit of Saccharomyces cerevisiae DNA polymerase delta (Pol delta). Interactions with POL31, the second subunit of Pol delta, are specified by the amino-terminal 92 amino acids, whereas interactions with the replication clamp proliferating cell nuclear antigen (PCNA, POL30) reside at the extreme carboxyl-terminal region. Pol32 binding, in vivo and in vitro, to the large subunit of DNA polymerase alpha, POL1, requires the carboxyl-proximal region of Pol32. The amino-terminal region of Pol32 is essential for damage-induced mutagenesis. However, the presence of its carboxyl-terminal PCNA-binding domain enhances the efficiency of mutagenesis, particularly at high loads of DNA damage. In vitro, in the absence of effector DNA, the PCNA-binding domain of Pol32 is essential for PCNA-Pol delta interactions. However, this domain has minimal importance for processive DNA synthesis by the ternary DNA-PCNA-Pol delta complex. Rather, processivity is determined by PCNA-binding domains located in the Pol3 and/or Pol31 subunits. Using diagnostic PCNA mutants, we show that during DNA synthesis the carboxyl-terminal domain of Pol32 interacts with the carboxyl-terminal region of PCNA, whereas interactions of the other subunit(s) of Pol delta localize largely to a hydrophobic pocket at the interdomain connector loop region of PCNA.

Alleles↗