PubMed Health⌕ Search

Biomedical subjects

Ernst E Van der Wall

Publications and source records attributed to Ernst E Van der Wall.

9 recordsLinked to original sources

Baroreflex sensitivity, blood pressure buffering, and resonance: what are the links? Computer simulation of healthy subjects and heart failure patients.

The arterial baroreflex buffers slow (<0.05 Hz) blood pressure (BP) fluctuations, mainly by controlling peripheral resistance. Baroreflex sensitivity (BRS), an important characteristic of baroreflex control, is often noninvasively assessed by relating heart rate (HR) fluctuations to BP fluctuations; more specifically, spectral BRS assessment techniques focus on the BP-to-HR transfer function around 0.1 Hz. Skepticism about the relevance of BRS to characterize baroreflex-mediated BP buffering is based on two considerations: 1) baroreflex-modulated peripheral vasomotor function is not necessarily related to baroreflex-HR transfer; and 2) although BP fluctuations around 0.1 Hz (Mayer waves) might be related to baroreflex BP buffering, they are merely a not-intended side effect of a closed-loop control system. To further investigate the relationship between BRS and baroreflex-mediated BP buffering, we set up a computer model of baroreflex BP control to simulate normal subjects and heart failure patients. Output variables for various randomly chosen combinations of feedback gains in the baroreflex arms were BP resonance, BP-buffering capacity, and BRS. Our results show that BP buffering and BP resonance are related expressions of baroreflex BP control and depend strongly on the sympathetic gain to the peripheral resistance. BRS is almost uniquely determined by the vagal baroreflex gain to the sinus node. In conclusion, BP buffering and BRS are unrelated unless coupled gains in all baroreflex limbs are assumed. Hence, the clinical benefit of a high BRS is most likely to be attributed to vagal effects on the heart instead of to effective BP buffering.

Algorithms↗

Ablation of focal atrial arrhythmia in patients with congenital heart defects after surgery: role of circumscribed areas with heterogeneous conduction.

BACKGROUND: In patients late after surgical repair of congenital heart disease (CHD), areas with abnormal electrophysiologic properties may serve as slow conducting pathways within a macroreentrant circuit or may be the source of focal atrial tachycardia. OBJECTIVES: The purpose of this study was to evaluate the role of abnormal areas during focal atrial tachycardia prior to ablation. METHODS: Electroanatomic activation mapping of 62 atrial tachycardias was performed in 43 consecutive patients (37 +/- 12 years) after surgical repair of CHD. The mechanism of atrial tachycardia was scar related intra-atrial reentry (n = 27), cavotricuspid-related atrial flutter (n = 21), atrial fibrillation (n = 2), or focal atrial tachycardia (n = 10). During intra-atrial reentry, channels of slow conduction could be identified in all patients. Subsequent ablation was directed toward connecting two nonconductive borders. The site of origin during focal atrial tachycardia showed fractionated potentials and/or continuous electrical activity. RESULTS: Ablation directed at isolating the source area resulted in termination of focal atrial tachycardia in all cases. In two patients, ablation of an area showing continuous electrical activity giving rise to fibrillatory conduction resulted in termination of atrial fibrillation. Ablation of intra-atrial reentry was successful in 70%. Atrial flutter and focal atrial tachycardia were successfully ablated in all patients. No complications were observed. CONCLUSION: In patients with surgically corrected CHD, atrial tachycardia most often is caused by a macroreentrant mechanism but in some is the result of a focal mechanism. Areas of abnormal conduction may serve not only as a zone of slow conduction within a macroreentrant circuit but also as the site of origin of a focal atrial arrhythmia. Catheter ablation directed at "source isolation" is effective in eliminating focal atrial tachycardia in patients with CHD.

Adolescent↗

Evaluation of the Quantitative Gated SPECT (QGS) software program in the presence of large perfusion defects.

OBJECTIVES: To evaluate the reproducibility and operator dependence for the quantitative regional left ventricular functional parameters (LVFP) assessed by Cedars-Sinai's Quantitative automated gated SPECT (QGS) software. METHODS: The QGS algorithm was reviewed in detail and potential operator dependencies were defined. Series of prototypes were selected, consisting of (a) normal perfusion, (b) perfusion defects in all perfusion regions, (c) perfusion studies of patients with angiographic confirmed normal coronary arteries, proximal (>or=70% stenoses) single and multiple vessel disease, and (d) spurious activity in close proximity. While defining and re-orienting the volume containing the left ventricle, the operator adjusted 8 variables/degrees of freedom (DF). The software was used without further operator interventions. Results were expressed as a coefficient of variation (COV). Separate COV were calculated per distinct DF. A segment was considered not robust when the COV did exceed 20% in a single DF, 15% in at least 2 DF, or 10% in at least 3 DF. RESULTS: Regional left ventricular EF and volumes showed excellent reproducibility. Normal perfusion and the vessel disease prototypes showed an excellent COV (for all re-orientation steps [33/prototype]) mostly below 5% for LVFP. However, regional wall motion and thickening became less reliable in the presence of large perfusion defects or artifacts. CONCLUSIONS: Quantitative estimates for regional left ventricular functional data show excellent reproducibility using automated gated SPECT. However, there may be substantial operator dependency in the presence of large defects or spurious activity in close proximity.

Algorithms↗

Voltage and activation mapping: how the recording technique affects the outcome of catheter ablation procedures in patients with congenital heart disease.

BACKGROUND: Endocardial mapping is mandatory before radiofrequency catheter ablation (RFCA). Mapping can be performed with either unipolar or bipolar recordings. Impact of the recording technique used was studied in patients with and without structural heart disease using the 3D electroanatomic CARTO mapping system. METHODS AND RESULTS: Patients (n=44; 16 males; age 43+/-16 years) referred for RFCA of atrial flutter (AFL, n=18), focal atrial tachycardia (FAT, n=4), AV nodal reentrant tachycardia (AVNRT, n=5), or scar-related atrial reentrant tachycardia (IART, n=17) were studied. Voltage and activation maps were constructed. Unipolar and bipolar voltage distribution in the different groups was studied to establish a cutoff voltage value to facilitate delineation of scar tissue. Electrograms were recorded during tachycardia (FAT: n=246, cycle length [CL]=449+/-35 ms; AVNRT: n=182, CL=359+/-47 ms; AFL: n=1164, CL=255+/-56 ms; IART: n=2431, CL=280+/-74 ms). Unipolar voltages were greater than bipolar voltages (P<0.001). Unipolar voltages < or =1.0 mV were equally distributed in both AFL and IART patients. Bipolar voltages < or =0.1 mV were only found in patients with IART, and subsequently 0.1 mV was used as the cutoff value to delineate scar tissue. No unipolar cutoff value could be established. Timing of unipolar and bipolar local activation was correlated in all patient groups. CONCLUSIONS: The recording technique used has considerable impact on reconstruction of reentrant pathways and on the outcome of RFCA. In general, unipolar and bipolar recordings provide complementary information; however, only bipolar recordings allow voltage-based scar tissue delineation in patients with congenital heart disease.

Adult↗

Assessment of diastolic function by cardiovascular magnetic resonance.

BACKGROUND: The assessment of diastolic heart function has been hampered by multiple difficulties. Cardiovascular magnetic resonance (CMR) is a new, noninvasive technique to study cardiac function. METHODS: The literature on CMR for the analysis of diastolic function and its clinical applications is extensively reviewed. RESULTS: Analysis of ventricular filling velocity and volume flow, volumetric assessment of ventricular chamber volume, analysis of 3-dimensional myocardial strains, and assessment of myocardial energy content are numerous validated applications of CMR. With the advent of real-time imaging and automated analysis of myocardial strains, CMR tagging is a promising method to assess regional diastolic function. Today, many CMR techniques are leaving the experimental or developmental stage rapidly and becoming clinically available for the evaluation of diastolic function in heart disease. CONCLUSIONS: CMR is emerging as a highly accurate and reproducible noninvasive 3-dimensional technique for the assessment of diastolic function.

Aortic Valve Stenosis↗