Biomedical subjects

Ernst Kenndler

Publications and source records attributed to Ernst Kenndler.

At least 19 recordsLinked to original sources

PubMed2005

Determination of fosfomycin in pus by capillary zone electrophoresis.

A method is described for the determination of fosfomycin in pus by capillary zone electrophoresis with reversed electroosmotic flow, and indirect UV absorbance detection. Sample pre-treatment is limited to removal of proteins and cell debris by adding the double volume of methanol, followed by vortexing for few seconds, and centrifugation at 15,000 x g for 2 min. The supernatant is directly injected into the instrument. Fosfomycin is separated from sample constituents with a background electrolyte at pH 7.25 (25 mM benzoate buffer with 0.5 mM hexadecyltrimethylammonium bromide added, adjusted to pH with tris(hydroxymethyl)-aminomethane (TRIS)). Separation is carried out in a capillary with 50 microm I.D., 64.5 cm total length, 56.0 cm to the detector, at 25 degrees C with -25 kV voltage applied. Due to the low absorbance of the analyte, indirect UV detection was performed at 254 nm using a bubble cell capillary. Sample was injected by pressure (450 mbar s). Repeatability for fosfomycin in spiked pus (from 8 or 10 consecutive injections of three different series at concentrations of 100 microg/mL of the antibiotic) was between 2.4 and 8.2% relative standard deviation (RSD). Accuracy (expressed as recovery of fosfomycin determined by three independent analysis at 10, 100 and 300 microg/mL fosfomycin added to plain pus) was between 75 and 102%. Intermediate reproducibility (n = 9 at three different days) was between 2 and 12% RSD. Limit of detection and limit of quantitation were 4.5 and 15 microg/mL, respectively. The concentration of fosfomycin in pus of patients treated with the antibiotic ranged up to 240 microg/mL. The concentration of other anionic pus constituents identified beside chloride (acetate, succinate, lactate, phosphate) ranged between 20 and 7800 microg/mL.

Abscess↗

PubMed2005

Enantioselective separation of rivastigmine by capillary electrophoresis with cyclodextrines.

Different beta-cyclodextrines (beta-cyclodextrin, heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin, hydroxypropyl-beta-cyclodextrin, and sulfated beta-cyclodextrin) were investigated as additives for the enantioselective separation of the R-form from rivastigmine ((S)-N-ethyl-3-[(1-dimethylamino) ethyl]-N-methyl-phenyl carbamate), contained as impurity in this drug, which is used for the treatment of Alzheimer's disease. Electrophoresis was performed in an acidic background electrolyte (triethanolammonium phosphate, 75 mM, pH 2.5) with various concentrations of the additives. The electrophoretic mobilities measured are typical functions of the additive concentrations, with complex constants (obtained by fitting the appropriate binding curve on the data) ranging between about 180 and 770 M(-1). Best separation was obtained with 7.5 mM beta-cyclodextrin, with the R-enantiomer as impurity migrating before the main S-compound. Intra- and interday reproducibility (n = 6 and 18, respectively) of migration time and peak area was in the low percentage range, linearity of the calibration line for the quantitation of the impurity in the range between 2.3 and 50 microg/ml, expressed by the linear correlation coefficient, was 0.9998. The limits of detection and quantitation, respectively, were 0.7 and 2.3 microg/ml, corresponding to 0.05 and 0.15%, m/m of the R- relative to the S-compound. Analysis can be carried out at 18 degrees C in less than 19 min.

Electrophoresis, Capillary↗

PubMed2005

Animal glues in mixtures of natural binding media used in artistic and historic objects: identification by capillary zone electrophoresis.

Animal glues were often used in historic and artistic objects, e.g. as paint ground, as binders for pigments, or as adhesives. The sources were egg, casein, or different collagens. For restoration and conservation purposes it is important to know which kind of animal glue a museum object contains. Capillary electrophoresis can deliver such information, because it enables differentiation among the three proteinaceous glue classes according to their different amino acid patterns after hydrolysis. This work deals with the most relevant problem in practice, whether this identification is obstructed by the presence of other binders, with which they are mixed in many real samples; in particular, interference from plant gums and drying oils was investigated. Capillary electrophoresis of the hydrolysates (after reaction with 6 mol L(-1) HCl) was performed with an acidic background electrolyte consisting of chloroacetic acid (51.9 mmol L(-1)) adjusted with LiOH to pH 2.26. The underivatised analytes were detected with a contactless conductivity detector. It was found that the constituents of the plant gums (monosaccharides) or drying oils (long-chain fatty acids and short-chain dicarboxylic acids) never interfered with identification of the animal glues, as shown for artificial mixtures of the different binders even at tenfold excess over the animal glue, and for egg tempera samples. The method was used to identify the filling material from a statue from the eighteenth century.

Journal Article↗

PubMed2005

Nitromethane as solvent in capillary electrophoresis.

Nitromethane has several properties that make it an interesting solvent for capillary electrophoresis especially for lipophilic analytes that are not sufficiently soluble in water: freezing and boiling points are suitable for laboratory conditions, low viscosity leads to favourable electrophoretic mobilities, or an intermediate dielectric constant enables dissolution of electrolytes. In the present work we investigate the change of electrophoretically relevant analyte properties - mobilities and pKa values - in nitromethane in dependence on the most important experimental conditions determined by the background electrolyte: the ionic strength, I, and the pH. It was found that the mobility decreases with increasing ionic strength (by, e.g. up to 30% from I = 0 to 50 mmol/L) according to theory. An appropriate pH scale is established by the aid of applying different concentration ratios of a buffer acid with known pKa and its conjugate base. The mobility of the anionic analytes (from weak neutral acids) depends on the pH with the typical sigmoidal curve in accordance with theory. The pKa of neutral acids derived from these curves is shifted by as much as 14 pK units in nitromethane compared to water. Both findings confirm the agreement of the electrophoretic behaviour of the analytes with theories of electrolyte solutions. Separation of several neutral analytes was demonstrated upon formation of charged complexes due to heteroconjugation with chloride as ionic constituent of the background electrolyte.

Electrophoresis, Capillary↗

PubMed2005

Characterisation of natural polysaccharides (plant gums) used as binding media for artistic and historic works by capillary zone electrophoresis.

The monosaccharide constituents of plant gums were separated by capillary electrophoresis at pH 12.1 and detected with indirect UV absorbance. The plant gums investigated were gum arabic, gum acacia, gum tragacanth, cherry gum and locust bean gum (carob gum). The monosaccharides obtained after hydrolysis with 2M trifluoroacetic acid and lyophilisation of the hydrolysate were arabinose, galactose, mannose, rhamnose, xylose, fucose, and glucose, and the two sugar acids galacturonic and glucuronic acid, in accordance with the literature. They were separated in a background electrolyte consisting of NaOH to adjust the pH, 20 mM 2,6-pyridinedicarboxylic acid as chromophore for detection and 0.5 mM cetyltrimethylammonium bromide as additive to reverse the electroosmotic flow. Based on their electropherograms, the plant gums could be identified by their typical composition (depicted in a decision scheme) as follows: a peak of glucuronic acid, together with that of rhamnose, is indicative for gum arabic. Peaks of galacturonic acid and fucose point to gum tragacanth. Locust bean gum shows a major peak for mannose (with the concomitant galactose peak in ratio 4-1), whereas a glucuronic acid and a mannose peak together with a prominent arabinose peak indicates cherry gum. The method was applied to identify the plant gums in samples like watercolours and in several paint layers like gum tempera or those with egg white or drying oils as additives. Artificial aging experiments of thin layers of gum arabic on paper or glass carried out with UV-A radiation (366 nm) did not result in changes of the saccharide patterns, in contrast to the simultaneously conducted aging of a drying oil layer.

Art↗

PubMed2005

Analyte and system eigenpeaks in nonaqueous capillary zone electrophoresis: theoretical description and experimental confirmation with methanol as solvent.

A mathematical model developed for aqueous solutions and adapted to methanol as solvent was applied to predict the electromigration characteristics of analytes and background electrolytes in capillary zone electrophoresis. These characteristics are the effective mobility, and the tendency of the analyte to undergo peak-broadening due to electromigration dispersion. The input parameters for calculation like limiting mobilities and dissociation constants were experimentally determined or taken from the literature. By the aid of the model, the molar response for conductivity detection was calculated as well as the transfer ratio when indirect UV detection was used. They allow depicting the electropherogram by computer simulation. An additional important program output is the prediction of the occurrence of system- or eigenpeaks that mimic peaks of analytes or electroosmotic flow markers. The measured electropherograms were in agreement with those theoretically predicted. Deviations were attributed to ion pairing in methanolic solutions, which was not implemented in the model.

Cations↗

PubMed2005

Characterization of proteins from Spirulina platensis microalga using capillary electrophoresis-ion trap-mass spectrometry and capillary electrophoresis-time of flight-mass spectrometry.

In this work, a new capillary electrophoresis-mass spectrometry (CE-MS) procedure is developed to analyze proteins in Spirulina platensis microalgae. It is demonstrated that a fine optimization of several separation parameters is essential in order to achieve suitable CE-MS analysis of these proteins in natural extracts from microalgae. Namely, optimization of the composition of the separation buffer, electrospray conditions, and washing routine between runs are required in order to obtain reliable and reproducible CE-MS analyses of the main proteins found in this microalga (namely, allophycocyanin-alpha chain, allophycocyanin-beta, c-phycocyanin-alpha, and c-phycocyanin-beta). The relative molecular mass of these biopolymers is determined using two different MS instruments coupled to CE, i.e., CE-ion trap-MS and CE-time of flight-MS (CE-TOF-MS). A comparison between the results obtained with both instruments is carried out. The high resolution of the TOF-MS enables the distinction of small modifications in proteins and, thus, a more accurate mass determination. Interestingly, molecular mass values obtained by both CE-MS procedures agree very well while these experimental values are only in partial agreement with those theoretically expected (i.e., genetically derived masses). Some protein modifications due to amino acids exchange induced by nucleotide codon mutations are proposed to explain this difference.

Bacterial Proteins↗

PubMed2004

Labeling of capsid proteins and genomic RNA of human rhinovirus with two different fluorescent dyes for selective detection by capillary electrophoresis.

During uncoating of human rhinoviruses, the innermost capsid protein VP4 and the genomic RNA are released from the viral protein shell. This process gives rise to subviral particles that are composed of the remaining three capsid proteins VP1, VP2, and VP3. The process is believed to take place in a sequential manner in that first VP4 is expelled resulting in A-particles sedimenting at 135S followed by the RNA resulting in B-particles sedimenting at 80S. Aiming at ultimately analyzing this process in vivo, we introduced two different fluorophores into the RNA and the viral capsid proteins, respectively. Incubation of the virus with RiboGreen resulted in formation of a RNA-dye complex with lambda(ex)/lambda(em) = 500/525 nm, whereas subsequent derivatization of the viral protein shell in the same sample with AMCA-S introduced a label with lambda(ex)/lambda(em) = 345-350/440-460 nm. In this way, both viral components could be selectively detected via fluorescence in a capillary electrophoresis system. The intact virus delivers two superimposed signals in the electropherogram. Derivatization of the free amino groups of the capsid proteins partially preserved the bioaffinity of the virus toward a synthetic receptor fragment, an artificial recombinant concatemer of repeat number 3 of the very low density lipoprotein receptor. Between 10 and 20% of the infectivity were recovered after labeling when compared to native virus. In addition to analysis of factors influencing the stability of the virus by CE, double-labeled virions might be useful for the investigation of the uncoating process by real-time confocal fluorescence microscopy.

Amines↗

PubMed2004

Fluorescence labeling of human rhinovirus capsid and analysis by capillary electrophoresis.

The capsid of human rhinovirus serotype 2, consisting of four viral proteins, was fluorescence-labeled with fluorescein isothiocyanate and analyzed by capillary electrophoresis using UV and laser-induced fluorescence detection. Heat denaturation, proteolytic digestion, and receptor binding were applied for confirmation of the identity of the peak with the labeled virus. Incomplete derivatization with the fluorophore preserved the affinity of the virus for its receptor, indicating that its cell entry pathway is unperturbed by this chemical modification; indeed, an infectivity assay confirms that the labeled virus samples are infectious. The results show that fluorescence labeling of the viral capsid might lead to a valuable probe for studying infection processes in the living cell.

Capsid↗

PubMed2004

Twelve receptor molecules attach per viral particle of human rhinovirus serotype 2 via multiple modules.

The crystallographic T = 1 (pseudo T = 3) icosahedral symmetry of the human rhinovirus capsid dictates the presence of 60 identical, symmetry related surface structures that are available for antibody and receptor binding. X-ray crystallography has shown that 60 individual very-low density lipoprotein receptor (VLDLR) modules bind to HRV2. Their arrangement around the fivefold axes of the virion suggested that tandem oligomers of such modules could attach simultaneously to symmetry-related sites. By resolving virus particles carrying various numbers of artificial recombinant concatemers of VLDLR repeat 3 (V33333) by capillary electrophoresis and extrapolation of the measured mobilities to that at saturation of all binding sites, we present evidence for up to 12 molecules of the concatemer to bind one single virion.

Electrophoresis, Capillary↗

PubMed2004

Capillary zone electrophoresis in non-aqueous solutions: pH of the background electrolyte.

Although the establishment of a pH scale and the determination of the pH in water is not problematic, it is not a straightforward task in non-aqueous solvents. As capillary zone electrophoresis (CZE) in organic solvents has gained increasing interest, it seems to be valuable to re-discuss the concept of the pH in such media, especially pointing to those aspects, which make pH measurement uncertain in non-aqueous solvents. In this review, the relevant aspects when dealing with primary standard (PS) and secondary standard (SS) as recommended by the International Union of Pure and Applied Chemistry (IUPAC), and the usage of the operational pH are discussed with special emphasis to non-aqueous solvents. Here, different liquid junction potentials, incomplete dissociation of the electrolytes (especially in solvents with low or moderate relative permittivity) and the occurrence of homo- and heteroconjugation must be taken into account. Problems arising in capillary zone electrophoresis practice are addressed, e.g. when the background electrolyte (BGE) consists of organic solvents, but the measuring electrode (normally the glass electrode) is calibrated with aqueous buffers, and the liquid junction potentials between the solvents do not cancel each other. The alternative concept of establishing a certain pH is described, using mixtures of reference acids or bases with known pKa in the organic solvent, and their respective salts, at a certain concentration ratio, relying to the Henderson-Hasselbalch equation. Special discussion is directed to those organic solvents most common in capillary zone electrophoresis, methanol (MeOH) and acetonitrile (ACN), but other solvents are included as well. The potential significance of small amounts of water present in the organic solvent on changes in pKa values, and thus on the pH of the buffering components is pointed out.

Acetonitriles↗

PubMed2004

Separation of ethoxylated bisphenol A dimethacrylates in dental composite after derivatisation to ionisable amines by capillary zone electrophoresis.

Bisphenol A ethoxylate dimethacrylates (Bis-EMA) are transformed into ionisable amines by derivatisation in order to make the analytes applicable to capillary electrophoresis. For this goal, piperidine was added onto the C=C double bond of the alpha,beta-unsaturated ester group forming a tertiary amine with pKa values between 9 and 10. Formation of the derivatives was confirmed by electrospray ionisation MS. Commercial Bis-EMA is a mixture of homologues with different number of ethoxy groups; it is characterised by the average number of the ethoxy groups in the chains. These homologues were resolved by capillary zone electrophoresis at pH 4. It is shown for the product with an average of four ethoxy groups per Bis-EMA molecule that about seven homologues can be baseline separated when differing by only one ethoxy group. For Bis-EMA with 30 ethoxy groups in average, about 23 homologues could be differentiated. The high resolution power of capillary zone electrophoresis enables characterisation of commercial dental composite material concerning the Bis-EMA constituents.

Amines↗

PubMed2004

Binding of fluorescent dye to genomic RNA inside intact human rhinovirus after viral capsid penetration investigated by capillary electrophoresis.

RiboGreen is used for concentration measurements of RNA. Upon binding to the RNA, an approximately 1000-fold increase in sensitivity in comparison with the UV absorbance of the free polynucleotide is observed. In the present work, we demonstrate that this dye can penetrate in a time- and temperature-dependent manner the intact viral capsids of human rhinovirus serotypes 2 and 14, where it forms a fluorescent complex with the viral RNA. Capillary electrophoresis with laser-induced fluorescence detection of virus incubated with RiboGreen shows that the electrophoretic mobility of the viruses remained unchanged upon dye-binding. As shown for human rhinovirus serotype 2, its native conformation was conserved, since it still bound a recombinant soluble receptor fragment derived from the very low density lipoprotein receptor. The labeled RNA was released by heat-induced uncoating of the virus, and the RNA-dye complex could be directly detected if degradation was prevented with an RNase inhibitor. This in vitro labeling of viral RNA encased within a protein shell demonstrates the virion's dynamic nature that temporarily allows access of a low-molecular-mass compound to the otherwise protected RNA. It might be of great value for experiments requiring fluorescent viral particles with an unmodified surface, such as investigations of endocytosis and viral uncoating on the single molecule level.

Capsid Proteins↗

PubMed2004

Analysis of drying oils used as binding media for objects of art by capillary electrophoresis with indirect UV and conductivity detection.

Capillary electrophoresis (CE) was applied to analyse the long-chain fatty acid composition of vegetable oils, and their degradation products formed upon ageing when drying oils are used as binding media. The analytes were detected with contactless conductivity detection (CCD) and indirect UV absorption, both detectors positioned on-line at the separation capillary. The long-chain fatty acids were resolved in a background electrolyte (BGE) consisting of phosphate buffer (pH = 6.86, 15 mM) containing 4 mM sodium dodecylbenzensulfonate, 10 mM Brij 35, 2% (v/v) 1-octanol and 45% (v/v) acetonitrile. As in this system dicarboxylic analytes, the products of oxidative degradation of unsaturated fatty acids, cannot be determined, a suitable background electrolyte was developed by the aid of computer simulation program PeakMaster. It makes use of a 10 mM salicylic acid, 20 mM histidine buffer, pH 5.85, which combines buffering ability with the optical properties obligatory for indirect UV detection. This buffer avoids system eigenpeaks, which are often impairing the separation efficiency of the system. Separation of the dicarboxylic analytes was further improved by a counter-directed electroosmotic flow (EOF), obtained by dynamically coating the capillary wall with 0.2 mM cetyltrimethylammonium bromide. Long-chain fatty acids and their decomposition products could be determined in recent and aged samples of drying oils, respectively, and in samples taken from two paintings of the 19th century.

Art↗

PubMed2004

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures.

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.

Anticonvulsants↗

PubMed2004

Determination of cationic mobilities and pKa values of 22 amino acids by capillary zone electrophoresis.

The effective mobilities of the cationic forms of common amino acids--mostly proteinogenic--were determined by capillary zone electrophoresis in acidic background electrolytes at pH between 2.0 and 3.2. The underivatized amino acids were detected by the double contactless conductivity detector. Experimentally measured effective mobilities were fitted with the suitable regression functions in dependence on pH of the background electrolyte. The parameters of the given regression function corresponded to the values of the actual mobilities and the mixed dissociation constants (combining activities and concentrations) of the compound related to the actual ionic strength. McInnes approximation and Onsager theory were used to obtain thermodynamic dissociation constants (pK(a)) and limiting (absolute) ionic mobilities.

Amino Acids↗

PubMed2004

Capillary electrophoresis analysis of fosfomycin in biological fluids for clinical pharmacokinetic studies.

A feasible capillary zone electrophoresis (CZE) method with indirect UV and contactless conductivity detection was developed for the determination of fosfomycin, an antibiotic, in human plasma and microdialysis samples. Samples were collected from test persons during a clinical trial. The background electrolytes used consisted of 25 mM benzoic acid and 0.5 mM hexadecyltrimethylammonium bromide, adjusted with tris(hydroxymethyl)aminomethane solution to pH 6.95 for plasma, and to pH 8.05 for microdialysis samples. CZE separations of the anionic analyte were carried out with reversed electroosmotic flow directed towards the anode. The limit of detection was between 0.6 and 2 microg/mL, depending on the matrix and the detection method. No sample preparation was needed for microdialysis samples; for plasma samples, proteins were precipitated with methanol (1+2, v+v), and the supernatant was analyzed. The yield determined with spiked samples was about 100%, the reproducibility of the entire method, expressed by the RSD% of three independent determinations of fosfomycin in triplicate after spiking Ringer's solutions and plasma samples, respectively, was better than 8%. The method is thus well-suited for clinical studies for the determination of the antibiotic in biological fluids.

Benzoic Acid↗

PubMed2004

Capillary electrophoresis of biological particles: viruses, bacteria, and eukaryotic cells.

A review about the application of electrophoretic methods in the capillary format for the investigation of large biological assemblies like viruses, bacteria, yeast or entire mammalian cells is given. These entities are of a size ranging between some nanometers and tens of micrometers. They can form colloidal solutions or dispersions and move under the influence of an electric field. They are separated by zone electrophoresis according to their different electrophoretic velocity, and characterized by the electrophoretic mobility, which is easily determinable in free solution in capillaries or in other microdevices. As the charge of these particles, when being amphoteric, is pH-dependent, isoelectric focusing can also be carried out and the capillary format is increasingly being employed for their separation and determination of pI values. Furthermore, interactions with ligands can be assessed by various modes of affinity capillary electrophoresis. Capillary zone electrophoresis has thus become a valuable tool for investigation of large macromolecular assemblies in the field of biochemistry, clinical chemistry, toxicology, and nutrition chemistry amongst many others.

Bacteria↗